Your message dated Mon, 17 Nov 2014 02:25:49 +0000 with message-id <1416191149.31390.0.camel@decadent.org.uk> and subject line Re: Bug#749016: linux-image-3.14-1-amd64: initrd generated under 3.14-1 v3.14.4-1 does not load sd_mod, boot fails has caused the Debian Bug report #749016, regarding linux-image-3.14-1-amd64: initrd generated under 3.14-1 v3.14.4-1 does not load sd_mod, boot fails to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 749016: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=749016 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.14-1-amd64: initrd generated under 3.14-1 v3.14.4-1 does not load sd_mod, boot fails
- From: Zack Weinberg <zackw@panix.com>
- Date: Thu, 22 May 2014 22:38:52 -0400
- Message-id: <20140523023852.2031.78123.reportbug@moxana.local>
Package: src:linux Version: 3.14.4-1 Severity: critical Justification: breaks the whole system initrd images generated under kernel 3.14.4-1 fail to load sd_mod automatically, which renders the system unbootable. I'm not sure precisely what is going wrong, but the phenomenon is common to both initramfs-tools and dracut, and started immediately after a kernel update, so I am provisionally blaming the kernel. On this computer, the syndrome is that ata_piix is loaded and the kernel correctly identifies the physical disks, but sd_mod is not loaded, the partition tables are not probed, and no /dev/sd* nor /dev/disk/* device nodes are created; the initrd then (naturally enough) hangs forever waiting for the root filesystem, or drops to an emergency shell. With dracut, 'rd.driver.post=sd_mod' on the kernel command line is a successful workaround. $ dmesg | grep -E 'scsi|sd' # this is how it's supposed to look [ 1.089716] scsi0 : ata_piix [ 1.090529] scsi1 : ata_piix [ 1.091595] scsi2 : ata_piix [ 1.091772] scsi3 : ata_piix [ 1.921174] scsi 0:0:1:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 1.921823] scsi 1:0:1:0: Direct-Access ATA WDC WD2500AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.923712] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.03 PQ: 0 ANSI: 5 [ 1.924001] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 2.812131] scsi4 : usb-storage 7-5.1:1.0 [ 3.815875] scsi 4:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.91 PQ: 0 ANSI: 0 [ 3.983731] sd 0:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.983755] sd 0:0:1:0: [sda] Write Protect is off [ 3.983757] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 3.983760] sd 1:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.983766] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.983790] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.983804] sd 1:0:1:0: [sdb] Write Protect is off [ 3.983807] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.983827] sd 3:0:0:0: [sdc] Write Protect is off [ 3.983830] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.983831] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.983851] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.991329] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 3.995588] sdc: unknown partition table [ 3.995738] sd 3:0:0:0: [sdc] Attached SCSI disk [ 3.999766] sda: unknown partition table [ 3.999856] sd 0:0:1:0: [sda] Attached SCSI disk [ 4.056789] sdb: sdb1 sdb2 sdb4 [ 4.057449] sd 1:0:1:0: [sdb] Attached SCSI disk [ 4.360257] BTRFS: device label store devid 2 transid 157084 /dev/sdc [ 4.360437] BTRFS: device label store devid 1 transid 157084 /dev/sda [ 4.615285] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 8.623537] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 8.761829] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 8.761861] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 8.761891] scsi 2:0:0:0: Attached scsi generic sg2 type 5 [ 8.761921] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 8.761953] sd 4:0:0:0: Attached scsi generic sg4 type 0 -- Package-specific info: ** Version: Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=eaf36848-eadc-4138-b2a9-db3d8ce82f34 ro init=/bin/systemd loglevel=3 console=tty1 rd.driver.post=sd_mod rd.shell ** Tainted: I (2048) * Working around severe firmware bug. ** Kernel log: [ 8.673532] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 8.724221] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20131218/utaddress-258) [ 8.724225] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.724243] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.761829] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 8.761861] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 8.761891] scsi 2:0:0:0: Attached scsi generic sg2 type 5 [ 8.761921] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 8.761953] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 8.820805] iTCO_vendor_support: vendor-support=0 [ 8.825183] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 8.825207] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 8.825280] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.854807] EDAC MC: Ver: 3.0.0 [ 8.857326] [drm] Initialized drm 1.1.0 20060810 [ 8.860837] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED) [ 8.860886] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 8.860891] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 8.914528] BTRFS: device label store devid 1 transid 157084 /dev/sda [ 8.914689] BTRFS: device label store devid 2 transid 157084 /dev/sdc [ 8.927720] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 9.016148] MXM: GUID detected in BIOS [ 9.016372] [drm] hdmi device not found 2 0 1 [ 9.016489] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x094100a1 [ 9.016490] nouveau [ DEVICE][0000:02:00.0] Chipset: G94 (NV94) [ 9.016492] nouveau [ DEVICE][0000:02:00.0] Family : NV50 [ 9.017326] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image... [ 9.075682] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid [ 9.075684] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN [ 9.075789] nouveau [ VBIOS][0000:02:00.0] BIT signature found [ 9.075791] nouveau [ VBIOS][0000:02:00.0] version 62.94.62.00.05 [ 9.096049] nouveau 0000:02:00.0: irq 42 for MSI/MSI-X [ 9.096063] nouveau [ PMC][0000:02:00.0] MSI interrupts enabled [ 9.096098] nouveau [ PFB][0000:02:00.0] RAM type: GDDR3 [ 9.096101] nouveau [ PFB][0000:02:00.0] RAM size: 512 MiB [ 9.096103] nouveau [ PFB][0000:02:00.0] ZCOMP: 4096 tags [ 9.102444] nouveau [ VOLT][0000:02:00.0] GPU voltage: 1000000uv [ 9.124636] nouveau [ PTHERM][0000:02:00.0] FAN control: PWM [ 9.124643] nouveau [ PTHERM][0000:02:00.0] fan management: automatic [ 9.124702] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes [ 9.124708] nouveau [ CLK][0000:02:00.0] 0f: core 650 MHz shader 1625 MHz memory 900 MHz [ 9.124749] nouveau [ CLK][0000:02:00.0] --: core 500 MHz shader 1250 MHz memory 499 MHz [ 9.124986] [TTM] Zone kernel: Available graphics memory: 6162834 kiB [ 9.124988] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 9.124990] [TTM] Initializing pool allocator [ 9.124996] [TTM] Initializing DMA pool allocator [ 9.125009] nouveau [ DRM] VRAM: 512 MiB [ 9.125011] nouveau [ DRM] GART: 1048576 MiB [ 9.125015] nouveau [ DRM] TMDS table version 2.0 [ 9.125017] nouveau [ DRM] DCB version 4.0 [ 9.125019] nouveau [ DRM] DCB outp 00: 02000300 00000028 [ 9.125022] nouveau [ DRM] DCB outp 01: 01000302 00020030 [ 9.125024] nouveau [ DRM] DCB outp 02: 04011310 00000028 [ 9.125026] nouveau [ DRM] DCB outp 03: 02011312 00020030 [ 9.125028] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080 [ 9.125031] nouveau [ DRM] DCB conn 00: 00001030 [ 9.125033] nouveau [ DRM] DCB conn 01: 00002130 [ 9.125035] nouveau [ DRM] DCB conn 02: 00000210 [ 9.125037] nouveau [ DRM] DCB conn 03: 00000211 [ 9.125039] nouveau [ DRM] DCB conn 04: 00000213 [ 9.135854] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.135861] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 9.136035] r8169 0000:06:00.0: irq 43 for MSI/MSI-X [ 9.136162] r8169 0000:06:00.0 eth0: RTL8168c/8111c at 0xffffc900018f6000, 40:61:86:cb:fc:55, XID 1c4000c0 IRQ 43 [ 9.136164] r8169 0000:06:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 9.166754] nouveau W[ DRM] failed to create encoder 0/1/0: -19 [ 9.166758] nouveau W[ DRM] TV-1 has no encoders, removing [ 9.166784] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.166786] [drm] Driver supports precise vblank timestamp query. [ 9.204950] BTRFS: device label store devid 2 transid 157084 /dev/sdc [ 9.205548] BTRFS: device label store devid 1 transid 157084 /dev/sda [ 9.250083] nouveau [ DRM] MM: using CRYPT for buffer copies [ 9.310292] nouveau [ DRM] allocated 1920x1200 fb: 0x70000, bo ffff880036af1400 [ 9.310359] fbcon: nouveaufb (fb0) is primary device [ 9.379777] Console: switching to colour frame buffer device 240x75 [ 9.382020] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 9.382021] nouveau 0000:02:00.0: registered panic notifier [ 9.382025] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0 [ 9.480721] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 9.668311] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 9.668390] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 9.668459] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 9.668527] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.668592] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.668660] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.668735] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.668848] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.917382] BTRFS: device label store devid 2 transid 157084 /dev/sdc [ 9.918225] BTRFS info (device sda): disk space caching is enabled [ 10.232147] Adding 33555452k swap on /dev/sdb2. Priority:-1 extents:1 across:33555452k [ 11.537459] floppy0: no floppy controllers found [ 16.519520] r8169 0000:06:00.0 eth0: link down [ 16.519531] r8169 0000:06:00.0 eth0: link down [ 16.519545] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.504617] r8169 0000:06:00.0 eth0: link up [ 18.504627] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.022930] Bridge firewalling registered [ 24.347042] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.881413] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 25.347941] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready ** Model information sys_vendor: MSI product_name: MS-7593 product_version: 1.0 chassis_vendor: MICRO-STAR INTERNATIONAL CO.,LTD chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: V3.8 board_vendor: MSI board_name: MSI X58M (MS-7593) board_version: 1.0 ** Loaded modules: xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc cpufreq_userspace cpufreq_conservative cpufreq_powersave cpufreq_stats binfmt_misc snd_hda_codec_realtek snd_hda_codec_generic joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm r8169 nouveau snd_timer video mxm_wmi evdev pcspkr ttm snd drm_kms_helper i7core_edac drm edac_core iTCO_wdt iTCO_vendor_support psmouse soundcore serio_raw sg coretemp i2c_algo_bit mii lpc_ich mfd_core kvm_intel kvm i2c_i801 acpi_cpufreq button processor wmi i2c_core tpm_infineon tpm_tis tpm thermal_sys fuse parport_pc md_mod ppdev lp parport ext4 crc16 mbcache jbd2 btrfs raid6_pq xor sd_mod crc_t10dif crct10dif_generic crct10dif_common usb_storage hid_generic hid_microsoft usbhid hid ata_generic crc32c_intel ata_piix libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod autofs4 ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 40:61:86:cb:fc:55 brd ff:ff:ff:ff:ff:ff inet 10.0.0.4/24 brd 10.0.0.255 scope global eth0 valid_lft forever preferred_lft forever 3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether 4e:0e:5e:45:5d:bd brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 2068777 1489 0 0 0 0 0 0 77129 711 0 0 0 0 0 0 lo: 24360 172 0 0 0 0 0 0 24360 172 0 0 0 0 0 0 virbr0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 1064 total packets received 0 forwarded 0 incoming packets discarded 1064 incoming packets delivered 913 requests sent out 32 outgoing packets dropped Icmp: 64 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 64 64 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 64 IcmpMsg: InType3: 64 OutType3: 64 Tcp: 8 active connections openings 2 passive connection openings 1 failed connection attempts 1 connection resets received 0 connections established 745 segments received 593 segments send out 0 segments retransmited 0 bad segments received. 1 resets sent Udp: 259 packets received 64 packets to unknown port received. 0 packet receive errors 252 packets sent UdpLite: TcpExt: 1 resets received for embryonic SYN_RECV sockets 2 TCP sockets finished time wait in fast timer 8 delayed acks sent 628 packet headers predicted 33 acknowledgments not containing data payload received 8 predicted acknowledgments 1 connections reset due to early user close TCPRcvCoalesce: 41 TCPAutoCorking: 1 IpExt: InMcastPkts: 47 OutMcastPkts: 51 InBcastPkts: 70 OutBcastPkts: 67 InOctets: 2050049 OutOctets: 95271 InMcastOctets: 6424 OutMcastOctets: 6584 InBcastOctets: 9470 OutBcastOctets: 8240 InNoECTPkts: 1764 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f8000000-fbcfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: i7core_edac 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at b800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: c0000000-c01fffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7ffc000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at ac00 [size=4] Region 2: I/O ports at a880 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a480 [size=16] Region 5: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7ff7c00 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at a000 [size=8] Region 1: I/O ports at 9c00 [size=4] Region 2: I/O ports at 9880 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9480 [size=16] Region 5: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Elitegroup Computer Systems Device [1019:10a1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at cc00 [size=128] Expansion ROM at fbc80000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02) Subsystem: Micro-Star International Co., Ltd. Device [1462:7593] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f6ff0000 (64-bit, prefetchable) [size=64K] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder [8086:2c01] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0 [8086:2c10] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 [8086:2c11] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller [8086:2c18] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers [8086:2c1c] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 005: ID 0424:4063 Standard Microsystems Corp. Bus 007 Device 004: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 001 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (501, 'unstable'), (500, 'testing'), (101, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.14-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.14-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii dracut [linux-initramfs-tool] 037-1 ii kmod 17-2 ii linux-base 3.5 ii module-init-tools 17-2 Versions of packages linux-image-3.14-1-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.14-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-10 pn linux-doc-3.14 <none> Versions of packages linux-image-3.14-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.41 ii firmware-linux-nonfree 0.41 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.41 pn xen-hypervisor <none> -- debconf information: linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false
--- End Message ---
--- Begin Message ---
- To: 749016-done@bugs.debian.org
- Subject: Re: Bug#749016: linux-image-3.14-1-amd64: initrd generated under 3.14-1 v3.14.4-1 does not load sd_mod, boot fails
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 17 Nov 2014 02:25:49 +0000
- Message-id: <1416191149.31390.0.camel@decadent.org.uk>
- In-reply-to: <[🔎] CAKCAbMiHcO34xCSFRJ7+0Gh7N-rsAso+HQcN0SH+DUhEHqTH3A@mail.gmail.com>
- References: <1412911612.2872.12.camel@decadent.org.uk> <[🔎] CAKCAbMiHcO34xCSFRJ7+0Gh7N-rsAso+HQcN0SH+DUhEHqTH3A@mail.gmail.com>
Version: 3.16.7-2 On Sun, 2014-11-16 at 15:12 -0500, Zack Weinberg wrote: > I apologize for the delay in getting back to you. > > With initramfs-tools 0.118, linux-image 3.16.7-2, and udev 215-5+b1, > I do not need to put sd_mod in /etc/initramfs-tools/modules for the > initramfs to detect and mount the root filesystem. > > Unfortunately, only a few days before you sent this query I upgraded > the motherboard on the affected computer, so I can't say for certain > that the problem is *fixed*, only that it does not affect this > computer anymore. As you were the only reporter to reply, I will assume this really is fixed (although we don't know how). Ben. -- Ben Hutchings Any smoothly functioning technology is indistinguishable from a rigged demo.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---