Bug#756358: linux-image-3.14-1-amd64: Please add to default nouveau wo acceleration hardware due to multiple bugs
Package: src:linux
Version: 3.14.12-1
Severity: normal
Hi due to bugs wich appeait on nouveau driver i set boot parameter
nouveau.noaccel=1.
Please add this parameter on default instalation on debian.
-- Package-specific info:
** Version:
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-4) ) #1 SMP Debian 3.14.12-1 (2014-07-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=/dev/mapper/debian-root ro quiet nouveau.noaccel=1
** Not tainted
** Kernel log:
[ 7.707455] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 7.784375] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.911636] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.053944] [drm] hdmi device not found 1 0 1
[ 8.054078] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x046f00a3
[ 8.054082] nouveau [ DEVICE][0000:01:00.0] Chipset: G72 (NV46)
[ 8.054084] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 8.055678] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 8.133302] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 8.133308] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 8.133442] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 8.133446] nouveau [ VBIOS][0000:01:00.0] version 05.72.22.43.00
[ 8.133741] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[ 8.133752] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 8.133784] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 8.133786] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 8.133789] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 8.176096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.176857] coretemp coretemp.0: Using relative temperature scale!
[ 8.176872] coretemp coretemp.0: Using relative temperature scale!
[ 8.185514] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 8.185624] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 8.185709] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 8.185790] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 8.185869] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 8.185950] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 8.186029] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 8.186111] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 8.187475] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 8.324044] iTCO_vendor_support: vendor-support=0
[ 8.347493] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 8.347542] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 8.348855] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.532129] Adding 3903484k swap on /dev/mapper/debian-swap. Priority:-1 extents:1 across:3903484k
[ 9.428041] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 9.428054] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 9.428058] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 9.447907] nouveau [ PTHERM][0000:01:00.0] temperature (96 C) hit the 'fanboost' threshold
[ 9.447913] nouveau [ PTHERM][0000:01:00.0] temperature (96 C) hit the 'downclock' threshold
[ 9.447942] nouveau [ CLK][0000:01:00.0] 20: core 550 MHz shader 550 MHz memory 540 MHz
[ 9.447951] nouveau [ CLK][0000:01:00.0] --: core 199 MHz memory 391 MHz
[ 9.448157] [TTM] Zone kernel: Available graphics memory: 2029412 kiB
[ 9.448160] [TTM] Initializing pool allocator
[ 9.448167] [TTM] Initializing DMA pool allocator
[ 9.448183] nouveau [ DRM] VRAM: 252 MiB
[ 9.448185] nouveau [ DRM] GART: 512 MiB
[ 9.448190] nouveau [ DRM] TMDS table version 1.1
[ 9.448192] nouveau W[ DRM] TMDS table script pointers not stubbed
[ 9.448194] nouveau [ DRM] DCB version 3.0
[ 9.448197] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 9.448200] nouveau [ DRM] DCB outp 01: 02011310 00000028
[ 9.448202] nouveau [ DRM] DCB outp 02: 01011312 00000000
[ 9.448204] nouveau [ DRM] DCB outp 03: 020223f1 00c0c080
[ 9.448207] nouveau [ DRM] DCB conn 00: 0000
[ 9.448210] nouveau [ DRM] DCB conn 01: 1130
[ 9.448212] nouveau [ DRM] DCB conn 02: 0210
[ 9.448214] nouveau [ DRM] DCB conn 03: 0211
[ 9.448216] nouveau [ DRM] DCB conn 04: 0213
[ 9.448373] nouveau [ DRM] Saving VGA fonts
[ 9.506276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.506281] [drm] Driver supports precise vblank timestamp query.
[ 9.506355] nouveau [ DRM] 0xD4A7: Parsing digital output script table
[ 9.556805] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 9.643054] nouveau [ DRM] allocated 1280x1024 fb: 0x8000, bo ffff88012a9ef400
[ 9.643203] fbcon: nouveaufb (fb0) is primary device
[ 9.664219] nouveau [ DRM] 0xD4A7: Parsing digital output script table
[ 9.718679] Console: switching to colour frame buffer device 160x64
[ 9.723370] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 9.723373] nouveau 0000:01:00.0: registered panic notifier
[ 9.723380] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 10.040036] floppy0: no floppy controllers found
[ 10.040054] work still pending
[ 10.962242] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.979317] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 11.262556] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 11.276413] systemd-journald[162]: Received request to flush runtime journal from PID 1
[ 11.987077] RPC: Registered named UNIX socket transport module.
[ 11.987083] RPC: Registered udp transport module.
[ 11.987085] RPC: Registered tcp transport module.
[ 11.987087] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.999651] FS-Cache: Loaded
[ 12.018438] FS-Cache: Netfs 'nfs' registered for caching
[ 12.053793] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.235080] cfg80211: Calling CRDA to update world regulatory domain
[ 17.686219] cfg80211: World regulatory domain updated:
[ 17.686227] cfg80211: DFS Master region: unset
[ 17.686230] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.686234] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.686238] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.686242] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 17.686245] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 17.686249] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 17.686252] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 17.786824] 8139too 0000:05:01.0 eth0: link down
[ 17.786972] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.791273] atl1 0000:02:00.0: irq 46 for MSI/MSI-X
[ 17.791494] atl1 0000:02:00.0: eth1 link is up 100 Mbps full duplex
[ 48.504891] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 48.557888] ISO 9660 Extensions: RRIP_1991A
[ 321.386195] perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: System manufacturer
product_name: P5K SE
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1402
board_vendor: ASUSTeK Computer INC.
board_name: P5K SE
board_version: Rev 1.xx
** Loaded modules:
nls_utf8
isofs
cfg80211
rfkill
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
iTCO_wdt
iTCO_vendor_support
coretemp
snd_hda_codec_realtek
snd_hda_codec_generic
nouveau
evdev
mxm_wmi
snd_hda_intel
serio_raw
pcspkr
snd_ca0106
wmi
snd_hda_codec
video
snd_rawmidi
snd_hwdep
i2c_i801
snd_seq_device
snd_ac97_codec
ac97_bus
lpc_ich
mfd_core
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
snd_pcm
shpchp
snd_timer
snd
soundcore
asus_atk0110
button
acpi_cpufreq
processor
thermal_sys
loop
fuse
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
usb_storage
8139too
8139cp
ata_piix
atl1
mii
pata_marvell
ahci
libahci
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fc000000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at b880 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b480 [size=16]
Region 5: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:81f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: snd_ca0106
05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 004: ID 0951:1603 Kingston Technology DataTraveler 1GB/2GB Pen Drive
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 001 Device 002: ID 04ca:0022 Lite-On Technology Corp.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.14-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.14-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: