Bug#754900: linux-image-3.14-1-amd64: When run embedded pdf file on iceweasel will break entire system
Package: src:linux
Version: 3.14.9-1
Severity: normal
When read this material on Iceweasell on page 30-50 entire system frozen and
must push hard-reset button to escape from this situation.
Very rare i catching when press Ctrl +Alt+F12 and result follow error on
terminal:
TTM Buffer eviction failed
I have nouveau driver on sytem.
-- Package-specific info:
** Version:
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-4) ) #1 SMP Debian 3.14.9-1 (2014-06-30)
** Command line:
BOOT_IMAGE=/vmlinuz-3.14-1-amd64 root=/dev/mapper/system-debian_root ro quiet init=/bin/systemd usbcore.autosuspend=5
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 10.161754] nouveau [ DEVICE][0000:01:00.0] Chipset: G72 (NV46)
[ 10.161757] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 10.163332] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 10.241860] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 10.241866] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 10.242000] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 10.242004] nouveau [ VBIOS][0000:01:00.0] version 05.72.22.43.00
[ 10.246982] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[ 10.246995] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 10.247039] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 10.247042] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 10.247045] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 10.282294] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (\SMRG) (20131218/utaddress-258)
[ 10.282305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.434602] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.456256] systemd-udevd[257]: renamed network interface eth0 to rename2
[ 10.473866] coretemp coretemp.0: Using relative temperature scale!
[ 10.473882] coretemp coretemp.0: Using relative temperature scale!
[ 10.488198] systemd-udevd[251]: renamed network interface eth1 to eth0
[ 10.536677] systemd-udevd[257]: renamed network interface rename2 to eth1
[ 10.888551] iTCO_vendor_support: vendor-support=0
[ 10.889429] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 10.889479] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 10.890583] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.917697] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 10.961116] EXT4-fs (sda1): Unrecognized mount option "x-gvfs-show" or missing value
[ 11.354431] Adding 2097148k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:2097148k
[ 11.552031] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 11.552043] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 11.552047] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 11.571900] nouveau [ PTHERM][0000:01:00.0] temperature (96 C) hit the 'fanboost' threshold
[ 11.571905] nouveau [ PTHERM][0000:01:00.0] temperature (96 C) hit the 'downclock' threshold
[ 11.571930] nouveau [ CLK][0000:01:00.0] 20: core 550 MHz shader 550 MHz memory 540 MHz
[ 11.571939] nouveau [ CLK][0000:01:00.0] --: core 199 MHz memory 391 MHz
[ 11.572050] [TTM] Zone kernel: Available graphics memory: 2029414 kiB
[ 11.572053] [TTM] Initializing pool allocator
[ 11.572060] [TTM] Initializing DMA pool allocator
[ 11.572078] nouveau [ DRM] VRAM: 252 MiB
[ 11.572081] nouveau [ DRM] GART: 512 MiB
[ 11.572086] nouveau [ DRM] TMDS table version 1.1
[ 11.572088] nouveau W[ DRM] TMDS table script pointers not stubbed
[ 11.572091] nouveau [ DRM] DCB version 3.0
[ 11.572094] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 11.572097] nouveau [ DRM] DCB outp 01: 02011310 00000028
[ 11.572099] nouveau [ DRM] DCB outp 02: 01011312 00000000
[ 11.572101] nouveau [ DRM] DCB outp 03: 020223f1 00c0c080
[ 11.572103] nouveau [ DRM] DCB conn 00: 0000
[ 11.572107] nouveau [ DRM] DCB conn 01: 1130
[ 11.572109] nouveau [ DRM] DCB conn 02: 0210
[ 11.572111] nouveau [ DRM] DCB conn 03: 0211
[ 11.572113] nouveau [ DRM] DCB conn 04: 0213
[ 11.572281] nouveau [ DRM] Saving VGA fonts
[ 11.630245] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.630251] [drm] Driver supports precise vblank timestamp query.
[ 11.630327] nouveau [ DRM] 0xD4A7: Parsing digital output script table
[ 11.682579] nouveau [ DRM] MM: using M2MF for buffer copies
[ 11.682593] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 11.741190] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff8800c985d000
[ 11.741476] fbcon: nouveaufb (fb0) is primary device
[ 11.763058] nouveau [ DRM] 0xD4A7: Parsing digital output script table
[ 11.817478] Console: switching to colour frame buffer device 160x64
[ 11.822169] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 11.822172] nouveau 0000:01:00.0: registered panic notifier
[ 11.822319] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 12.362902] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.756108] floppy0: no floppy controllers found
[ 12.756137] work still pending
[ 14.434470] BTRFS: device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 138871 /dev/dm-2
[ 14.548476] BTRFS: device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 138871 /dev/dm-2
[ 14.562636] BTRFS: device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 138871 /dev/dm-2
[ 14.865279] BTRFS: device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 138871 /dev/mapper/system-debian_home
[ 14.865860] BTRFS info (device dm-2): disk space caching is enabled
[ 15.107890] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 15.201873] Adding 2047996k swap on /dev/mapper/fedora_192--168--0--152-swap. Priority:-2 extents:1 across:2047996k
[ 15.661353] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.723905] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 17.441554] atl1 0000:02:00.0: irq 45 for MSI/MSI-X
[ 17.441638] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 18.133219] RPC: Registered named UNIX socket transport module.
[ 18.133225] RPC: Registered udp transport module.
[ 18.133227] RPC: Registered tcp transport module.
[ 18.133229] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.184974] FS-Cache: Loaded
[ 18.209663] FS-Cache: Netfs 'nfs' registered for caching
[ 18.276516] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.326055] 8139too 0000:05:01.0 eth1: link down
[ 26.326329] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.830537] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 30.842172] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 30.851339] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 30.851489] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 30.851612] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 30.851737] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 30.851859] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 30.851979] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 30.852499] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 30.852634] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 34.017553] postgres (1809): /proc/1809/oom_adj is deprecated, please use /proc/1809/oom_score_adj instead.
[ 56.428343] ata5.00: configured for UDMA/133
[ 56.428353] ata5: EH complete
** Model information
sys_vendor: System manufacturer
product_name: P5K SE
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1402
board_vendor: ASUSTeK Computer INC.
board_name: P5K SE
board_version: Rev 1.xx
** Loaded modules:
snd_hda_intel(O)
snd_hda_codec_realtek(O)
snd_hda_codec(O)
snd_hrtimer
snd_hwdep
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
snd_ca0106
iTCO_wdt
iTCO_vendor_support
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_ac97_codec
snd_pcm
snd_seq
snd_seq_device
snd_timer
lpc_ich
coretemp
mfd_core
snd
pcspkr
soundcore
ac97_bus
serio_raw
i2c_i801
nouveau
cdc_acm
evdev
mxm_wmi
wmi
video
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
shpchp
asus_atk0110
button
acpi_cpufreq
processor
thermal_sys
ip6table_filter
ip6_tables
xt_tcpudp
iptable_filter
ip_tables
x_tables
cuse
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
crc32c
btrfs
xor
raid6_pq
dm_mod
hid_generic
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_common
usb_storage
ata_generic
ata_piix
8139too
8139cp
atl1
mii
pata_marvell
ahci
libahci
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fc000000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at b880 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b480 [size=16]
Region 5: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:81f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82a2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: snd_ca0106
05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 04e8:685e Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II] (USB Debugging mode)
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 001 Device 002: ID 04ca:0022 Lite-On Technology Corp.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.14-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.14-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true
linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false
Reply to: