Bug#750997: linux-image-3.15-rc7-amd64: Kernel message "Uhhuh. NMI received for unknown reason 2c on CPU 0." appears after suspend to disk
Package: src:linux
Version: 3.15~rc7-1~exp1
Severity: normal
Dear Maintainer,
some seconds or minutes after waking up from suspend to disk after the NMI
watchdog has been disabled (e.g. with powertop or with "echo 0 >
/proc/sys/kernel/nmi_watchdog") before suspend, I get the following message
from the kernel:
> Uhhuh. NMI received for unknown reason 2c on CPU 0.
> Do you have a strange power saving mode enabled?
> Dazed and confused, but trying to continue
The exact timing seems to differ from run to run. The problem seems to be
identical to the problem reported here:
http://linux-kernel.2935.n7.nabble.com/Uhhuh-NMI-received-for-unknown-reason-2c-on-CPU-0-tp591524p628729.html
Please note that the linked thread is interleaved with an independent e1000
networking problem. The NMI problem seems to be unrelated from e1000 there
and it definitely is unrelated here, as no e1000 is loaded or plugged-in.
I only tested 3.15, RC7, but I guess, that the problem occurs with older
kernels, too, and that I didn't see it before, as I just recently switched
the aforementioned watchdog option. I can test different kernels if this
helps, but as the kernels works without any obvious problems, I haven't done
this, yet.
The end of a restore from disk run looks like the following:
[29240.016685] PM: restore of devices complete after 2379.959 msecs
[29240.017030] PM: Image restored successfully.
[29240.017063] PM: Basic memory bitmaps freed
[29240.017064] Restarting tasks ... done.
[29423.719271] Uhhuh. NMI received for unknown reason 2c on CPU 0.
[29423.719281] Do you have a strange power saving mode enabled?
[29423.719286] Dazed and confused, but trying to continue
Another, more detailed run, looks as follows:
[ 69.624048] PM: Hibernation mode set to 'platform'
[ 69.969074] (NULL device *): firmware: direct-loading firmware amd-ucode/microcode_amd.bin
[ 69.969114] PM: Syncing filesystems ... done.
[ 70.385415] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 70.387587] PM: Marking nosave pages: [mem 0x00098000-0x000fffff]
[ 70.387600] PM: Marking nosave pages: [mem 0xdff90000-0xffffffff]
[ 70.388839] PM: Marking nosave pages: [mem 0xd4000000-0xd7ffffff]
[ 70.389642] PM: Basic memory bitmaps created
[ 70.389699] PM: Preallocating image memory... done (allocated 218996 pages)
[ 71.123610] PM: Allocated 875984 kbytes in 0.73 seconds (1199.97 MB/s)
[ 71.123612] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 71.125251] Suspending console(s) (use no_console_suspend to debug)
[ 71.175132] PM: freeze of devices complete after 49.868 msecs
[ 71.176441] PM: late freeze of devices complete after 1.304 msecs
[ 71.177795] PM: noirq freeze of devices complete after 1.350 msecs
[ 71.179148] ACPI: Preparing to enter system sleep state S4
[ 71.180007] PM: Saving platform NVS memory
[ 71.180527] Disabling non-boot CPUs ...
[ 71.182262] kvm: disabling virtualization on CPU1
[ 71.282478] smpboot: CPU 1 is now offline
[ 71.284767] kvm: disabling virtualization on CPU2
[ 71.284775] smpboot: CPU 2 is now offline
[ 71.286771] kvm: disabling virtualization on CPU3
[ 71.286823] smpboot: CPU 3 is now offline
[ 71.288525] kvm: disabling virtualization on CPU4
[ 71.390451] smpboot: CPU 4 is now offline
[ 71.392044] kvm: disabling virtualization on CPU5
[ 71.494456] smpboot: CPU 5 is now offline
[ 71.494801] PM: Creating hibernation image:
[ 71.667480] PM: Need to copy 220062 pages
[ 71.667481] PM: Normal pages needed: 220062 + 1024, available pages: 2908835
[ 71.495930] PM: Restoring platform NVS memory
[ 71.496021] PCI-DMA: Resuming GART IOMMU
[ 71.496021] PCI-DMA: Restoring GART aperture settings
[ 71.496195] LVT offset 1 assigned for vector 0x400
[ 71.496203] IBS: LVT offset 1 assigned
[ 71.496274] Enabling non-boot CPUs ...
[ 71.496382] x86: Booting SMP configuration:
[ 71.496383] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 71.507336] kvm: enabling virtualization on CPU1
[ 71.509428] process: Switch to broadcast mode on CPU1
[ 71.509647] CPU1 is up
[ 71.509701] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 71.520653] kvm: enabling virtualization on CPU2
[ 71.522741] process: Switch to broadcast mode on CPU2
[ 71.522914] CPU2 is up
[ 71.522976] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 71.533929] kvm: enabling virtualization on CPU3
[ 71.536031] process: Switch to broadcast mode on CPU3
[ 71.536208] CPU3 is up
[ 71.536270] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 71.547221] kvm: enabling virtualization on CPU4
[ 71.549333] process: Switch to broadcast mode on CPU4
[ 71.549510] CPU4 is up
[ 71.549574] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 71.560527] kvm: enabling virtualization on CPU5
[ 71.562615] process: Switch to broadcast mode on CPU5
[ 71.562789] CPU5 is up
[ 71.569418] ACPI: Waking up from system sleep state S4
[ 71.584196] PM: noirq restore of devices complete after 14.608 msecs
[ 71.584799] PM: early restore of devices complete after 0.560 msecs
[ 71.640133] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 71.640210] radeon 0000:01:05.0: WB enabled
[ 71.640213] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800dfb39c00
[ 71.641849] sd 0:0:0:0: [sda] Starting disk
[ 71.641892] sd 2:0:0:0: [sdb] Starting disk
[ 71.672129] [drm] ring test on 0 succeeded in 1 usecs
[ 71.672147] [drm] ib test on ring 0 succeeded in 0 usecs
[ 71.672380] r8169 0000:02:00.0 eth0: link down
[ 71.696047] usb usb5: root hub lost power or was reset
[ 71.696086] usb usb6: root hub lost power or was reset
[ 71.696100] usb usb7: root hub lost power or was reset
[ 71.696106] usb usb2: root hub lost power or was reset
[ 71.696123] usb usb3: root hub lost power or was reset
[ 71.696164] usb usb4: root hub lost power or was reset
[ 71.696209] usb usb1: root hub lost power or was reset
[ 71.960063] ata2: SATA link down (SStatus 0 SControl 300)
[ 71.960126] ata4: SATA link down (SStatus 0 SControl 300)
[ 71.960207] ata6: SATA link down (SStatus 0 SControl 300)
[ 72.024128] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 72.132084] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 72.132120] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 72.132153] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 72.132600] ata1.00: configured for UDMA/100
[ 72.133058] ata5.00: configured for UDMA/100
[ 72.143199] ata3.00: configured for UDMA/133
[ 72.628236] usb 2-1.1: reset low-speed USB device number 3 using ehci-pci
[ 73.168194] usb 2-1.2: reset low-speed USB device number 4 using ehci-pci
[ 73.240881] r8169 0000:02:00.0 eth0: link up
[ 73.536291] usb 2-1.3: reset full-speed USB device number 5 using ehci-pci
[ 74.086254] PM: restore of devices complete after 2448.838 msecs
[ 74.086593] PM: Image restored successfully.
[ 74.086621] PM: Basic memory bitmaps freed
[ 74.086623] Restarting tasks ... done.
[ 109.050655] Uhhuh. NMI received for unknown reason 2c on CPU 0.
[ 109.050659] Do you have a strange power saving mode enabled?
[ 109.050660] Dazed and confused, but trying to continue
Kind regards
Patrick
-- Package-specific info:
** Version:
Linux version 3.15-rc7-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.15~rc7-1~exp1 (2014-05-27)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.15-rc7-amd64 root=UUID=1972ccfb-49c1-44a2-bd3c-6300a6e7222d ro quiet RESUME=/dev/sda4 init=/bin/systemd
** Not tainted
** Kernel log:
[ 2.494848] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.494855] usb usb5: Product: OHCI PCI host controller
[ 2.494861] usb usb5: Manufacturer: Linux 3.15-rc7-amd64 ohci_hcd
[ 2.494866] usb usb5: SerialNumber: 0000:00:13.0
[ 2.495266] hub 5-0:1.0: USB hub found
[ 2.495286] hub 5-0:1.0: 5 ports detected
[ 2.495959] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.495976] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.496035] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000
[ 2.554737] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.554742] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.554745] usb usb6: Product: OHCI PCI host controller
[ 2.554748] usb usb6: Manufacturer: Linux 3.15-rc7-amd64 ohci_hcd
[ 2.554750] usb usb6: SerialNumber: 0000:00:14.5
[ 2.554987] hub 6-0:1.0: USB hub found
[ 2.554997] hub 6-0:1.0: 2 ports detected
[ 2.555306] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.555315] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.555344] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f3000
[ 2.614787] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.614792] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.614795] usb usb7: Product: OHCI PCI host controller
[ 2.614797] usb usb7: Manufacturer: Linux 3.15-rc7-amd64 ohci_hcd
[ 2.614798] usb usb7: SerialNumber: 0000:00:16.0
[ 2.615022] hub 7-0:1.0: USB hub found
[ 2.615028] hub 7-0:1.0: 4 ports detected
[ 2.624521] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input6
[ 2.631986] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 2.631998] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.632006] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.632011] sound hdaudioC0D2: mono: mono_out=0x0
[ 2.632016] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 2.632021] sound hdaudioC0D2: inputs:
[ 2.632027] sound hdaudioC0D2: Front Mic=0x19
[ 2.632032] sound hdaudioC0D2: Rear Mic=0x18
[ 2.632038] sound hdaudioC0D2: Line=0x1a
[ 2.648926] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 2.649001] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 2.649563] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 2.649663] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 2.649825] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 2.650002] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 2.650987] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 2.651067] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 2.674762] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.686885] Switched to clocksource tsc
[ 2.807062] usb 2-1: New USB device found, idVendor=0409, idProduct=005a
[ 2.807074] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.807628] hub 2-1:1.0: USB hub found
[ 2.807829] hub 2-1:1.0: 3 ports detected
[ 2.865666] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 3.094956] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 3.224727] usb 2-1.1: New USB device found, idVendor=045e, idProduct=00db
[ 3.224739] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.224746] usb 2-1.1: Product: Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000
[ 3.224751] usb 2-1.1: Manufacturer: Microsoft
[ 3.245772] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.265367] usbcore: registered new interface driver usbhid
[ 3.265369] usbhid: USB HID core driver
[ 3.270769] input: Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:00DB.0001/input/input15
[ 3.270986] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:13.2-1.1/input0
[ 3.272620] input: Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:00DB.0002/input/input16
[ 3.272800] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:13.2-1.1/input1
[ 3.315056] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[ 3.428820] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c051
[ 3.428831] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.428837] usb 2-1.2: Product: USB-PS/2 Optical Mouse
[ 3.428843] usb 2-1.2: Manufacturer: Logitech
[ 3.451391] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C051.0003/input/input17
[ 3.451730] hid-generic 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.2-1.2/input0
[ 3.518893] usb 2-1.3: new full-speed USB device number 5 using ehci-pci
[ 3.674705] usb 2-1.3: New USB device found, idVendor=056d, idProduct=0002
[ 3.674715] usb 2-1.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 3.674721] usb 2-1.3: Product: EIZO USB HID Monitor
[ 3.674726] usb 2-1.3: Manufacturer: EIZO
[ 4.688015] hid-generic 0003:056D:0002.0004: hiddev0,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:13.2-1.3/input0
[ 5.172341] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.487543] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.533841] systemd-journald[301]: Received request to flush runtime journal from PID 1
[ 6.795513] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168d-1.fw (-2)
[ 6.795587] r8169 0000:02:00.0: Direct firmware load failed with error -2
[ 6.795591] r8169 0000:02:00.0: Falling back to user helper
[ 6.796574] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-12)
[ 6.812271] r8169 0000:02:00.0 eth0: link down
[ 6.812289] r8169 0000:02:00.0 eth0: link down
[ 6.812427] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.057402] RPC: Registered named UNIX socket transport module.
[ 7.057411] RPC: Registered udp transport module.
[ 7.057416] RPC: Registered tcp transport module.
[ 7.057420] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.061043] FS-Cache: Loaded
[ 7.067918] FS-Cache: Netfs 'nfs' registered for caching
[ 7.075995] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.177690] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 7.177837] NFSD: starting 90-second grace period (net ffffffff8188c240)
[ 8.303075] r8169 0000:02:00.0 eth0: link up
[ 8.303086] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.181549] r8169 0000:02:00.0 eth0: link down
[ 14.059727] r8169 0000:02:00.0 eth0: link up
[ 330.482647] r8169 0000:02:00.0 eth0: link down
** Model information
sys_vendor: MSI
product_name: MS-7642
product_version: 1.0
chassis_vendor: MSI
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: V1.13
board_vendor: MSI
board_name: 890GXM-G65 (MS-7642)
board_version: 1.0
** Loaded modules:
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
hid_generic
joydev
hid_microsoft
usbhid
hid
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
evdev
kvm_amd
kvm
sg
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_seq_midi
snd_pcm_oss
parport_pc
tpm_infineon
snd_mixer_oss
snd_seq_midi_event
parport
snd_pcm
snd_rawmidi
tpm_tis
psmouse
tpm
pcspkr
serio_raw
sr_mod
ohci_pci
cdrom
ohci_hcd
ehci_pci
ne2k_pci
snd_seq
ehci_hcd
8390
snd_seq_device
edac_mce_amd
snd_timer
edac_core
usbcore
usb_common
sp5100_tco
i2c_piix4
snd
soundcore
button
r8169
mii
acpi_cpufreq
processor
thermal_sys
shpchp
ip6table_filter
ip6_tables
xt_LOG
xt_limit
xt_multiport
xt_conntrack
iptable_filter
xt_TCPMSS
xt_tcpmss
xt_tcpudp
iptable_mangle
ipt_MASQUERADE
iptable_nat
f71882fg
k10temp
nf_conntrack_ipv4
nf_defrag_ipv4
fuse
nf_nat_ipv4
nf_nat
nf_conntrack
loop
ip_tables
x_tables
dm_crypt
dm_mod
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_common
radeon
ahci
libahci
i2c_algo_bit
drm_kms_helper
ttm
libata
drm
scsi_mod
i2c_core
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe8fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6f3000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 [Radeon HD 4290] [1002:9714] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe8e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7642]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at e800 [size=32]
Kernel driver in use: ne2k-pci
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 056d:0002 EIZO Corp. HID Monitor Controls
Bus 002 Device 004: ID 046d:c051 Logitech, Inc. G3 (MX518) Optical Mouse
Bus 002 Device 003: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'stable'), (500, 'testing-proposed-updates'), (400, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.15-rc7-amd64 (SMP w/6 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.15-rc7-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.15-rc7-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.15-rc7-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb8u1
ii grub-pc 2.00-22
pn linux-doc-3.15 <none>
Versions of packages linux-image-3.15-rc7-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.41
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.15-rc7-amd64/postinst/depmod-error-initrd-3.15-rc7-amd64: false
linux-image-3.15-rc7-amd64/prerm/removing-running-kernel-3.15-rc7-amd64: true
Reply to: