Bug#750354: linux-image-3.2.0-4-kirkwood: usbip-core.ko and usbip-host.ko missing
Package: src:linux
Version: 3.2.57-3+deb7u1
Severity: important
Dear Maintainer,
modules "usbip-core.ko" and "usbip-host.ko" (and possibly other
usbip-related modules) are missing from the Debian kernel. As "usbip"
itself is offered as a package, I believe the modules should be present.
I suspect the modules' absence is due to the following line, extracted
from /boot/config-3.2.0-4-kirkwood:
> # CONFIG_USBIP_CORE is not set
* What led up to the situation?
$ apt-get install usbip
$ sudo usbipd -D
usbipd: error: please load usbip-core.ko and usbip-host.ko!
$ sudo modprobe usbip-core
FATAL: Module usbip-core not found.
* What outcome did you expect instead?
I expected the module(s) to load and, subsequently, usbip to work.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.57-3
** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[2070899.969390] Did not find alt setting 1 for intf 0, config 1
[2070945.026027] Did not find alt setting 1 for intf 0, config 1
[2070990.025258] Did not find alt setting 1 for intf 0, config 1
[2071035.024697] Did not find alt setting 1 for intf 0, config 1
[2071069.408365] Did not find alt setting 1 for intf 0, config 1
[2071071.422382] Did not find alt setting 1 for intf 0, config 1
[2071073.422756] Did not find alt setting 1 for intf 0, config 1
[2071075.423107] Did not find alt setting 1 for intf 0, config 1
[2071076.344966] usb 1-1.4.1: USB disconnect, device number 9
[2071087.587514] usb 1-1.4.1: new high-speed USB device number 10 using orion-ehci
[2071087.708092] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611
[2071087.715525] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2071087.723284] usb 1-1.4.1: Product: Photosmart C3100 series
[2071087.728926] usb 1-1.4.1: Manufacturer: HP
[2071087.733130] usb 1-1.4.1: SerialNumber: CN738C300N04P9
[2071087.743934] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[2071087.766213] scsi7 : usb-storage 1-1.4.1:1.3
[2071088.784305] scsi 7:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[2071088.795830] sd 7:0:0:0: Attached scsi generic sg2 type 0
[2071088.805155] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[2071188.195281] usblp0: removed
[2071188.199283] Did not find alt setting 1 for intf 0, config 1
[2071258.658264] Did not find alt setting 1 for intf 0, config 1
[2071303.657639] Did not find alt setting 1 for intf 0, config 1
[2071348.657189] Did not find alt setting 1 for intf 0, config 1
[2071393.657947] Did not find alt setting 1 for intf 0, config 1
[2071438.657431] Did not find alt setting 1 for intf 0, config 1
[2071483.657072] Did not find alt setting 1 for intf 0, config 1
[2071542.776966] usb 1-1.4.1: USB disconnect, device number 10
[2071555.812751] usb 1-1.4.1: new high-speed USB device number 11 using orion-ehci
[2071555.923467] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611
[2071555.930830] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2071555.938571] usb 1-1.4.1: Product: Photosmart C3100 series
[2071555.944246] usb 1-1.4.1: Manufacturer: HP
[2071555.948446] usb 1-1.4.1: SerialNumber: CN738C300N04P9
[2071555.956686] usblp0: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[2071556.037585] scsi8 : usb-storage 1-1.4.1:1.3
[2071557.035680] scsi 8:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[2071557.047034] sd 8:0:0:0: Attached scsi generic sg2 type 0
[2071557.055650] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[2071658.232967] usb 1-1.4.1: USB disconnect, device number 11
[2071658.239682] usblp0: removed
[2071670.499250] usb 1-1.4.1: new high-speed USB device number 12 using orion-ehci
[2071670.609866] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611
[2071670.617130] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2071670.624848] usb 1-1.4.1: Product: Photosmart C3100 series
[2071670.630482] usb 1-1.4.1: Manufacturer: HP
[2071670.634680] usb 1-1.4.1: SerialNumber: CN738C300N04P9
[2071670.662883] usblp0: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611
[2071670.715658] scsi9 : usb-storage 1-1.4.1:1.3
[2071671.719794] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2
[2071671.733703] sd 9:0:0:0: Attached scsi generic sg2 type 0
[2071671.742153] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[2071902.710106] usblp0: removed
[2071902.725344] Did not find alt setting 1 for intf 0, config 1
[2071956.944911] Did not find alt setting 1 for intf 0, config 1
[2072102.190400] Did not find alt setting 1 for intf 0, config 1
[2072155.218286] Did not find alt setting 1 for intf 0, config 1
[2072185.219128] Did not find alt setting 1 for intf 0, config 1
[2072270.254241] Did not find alt setting 1 for intf 0, config 1
[2072288.930411] Did not find alt setting 1 for intf 0, config 1
[2072349.377321] Did not find alt setting 1 for intf 0, config 1
[2073748.346142] Did not find alt setting 1 for intf 0, config 1
[2073822.225081] Did not find alt setting 1 for intf 0, config 1
[2074557.417154] Did not find alt setting 1 for intf 0, config 1
[2074557.417985] Did not find alt setting 1 for intf 0, config 1
[2074801.553679] Did not find alt setting 1 for intf 0, config 1
[2074819.645063] Did not find alt setting 1 for intf 0, config 1
[2074821.645406] Did not find alt setting 1 for intf 0, config 1
[2074823.645849] Did not find alt setting 1 for intf 0, config 1
[2074929.817791] Did not find alt setting 1 for intf 0, config 1
[2075117.011814] Did not find alt setting 1 for intf 0, config 1
[2075119.012238] Did not find alt setting 1 for intf 0, config 1
[2075121.012601] Did not find alt setting 1 for intf 0, config 1
[2075123.012977] Did not find alt setting 1 for intf 0, config 1
[2075125.013367] Did not find alt setting 1 for intf 0, config 1
[2075127.013761] Did not find alt setting 1 for intf 0, config 1
[2075351.288964] usb 1-1.4.1: USB disconnect, device number 12
[2499882.728614] usb 1-1.4.1: new high-speed USB device number 13 using orion-ehci
[2499882.842088] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122
[2499882.849359] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2499882.857049] usb 1-1.4.1: Product: EPSON Scanner
[2499882.861806] usb 1-1.4.1: Manufacturer: EPSON
[2501472.922698] usb 1-1.4.1: usbfs: interface 0 claimed by usbfs while 'saned' sets config #1
[2502262.008968] usb 1-1.4.1: USB disconnect, device number 13
[2502274.533752] usb 1-1.4.1: new high-speed USB device number 14 using orion-ehci
[2502274.647220] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122
[2502274.654504] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2502274.662197] usb 1-1.4.1: Product: EPSON Scanner
[2502274.666959] usb 1-1.4.1: Manufacturer: EPSON
[2503678.968969] usb 1-1.4.1: USB disconnect, device number 14
[2504217.832740] usb 1-1.4.1: new high-speed USB device number 15 using orion-ehci
[2504217.956343] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122
[2504217.963634] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2504217.971328] usb 1-1.4.1: Product: EPSON Scanner
[2504217.976087] usb 1-1.4.1: Manufacturer: EPSON
[2504538.277319] usb 1-1.4.1: usbfs: interface 0 claimed by usbfs while 'scanimage' sets config #1
[2504669.988359] usb 1-1.4.1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110
[2504670.988303] usb 1-1.4.1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110
[2504748.792971] usb 1-1.4.1: USB disconnect, device number 15
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : QNAP TS-119/TS-219
Revision : 0000
** Loaded modules:
usblp
tun
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
stp
ipv6
aufs(C)
loop
dm_crypt
sg
snd_usb_audio
snd_usbmidi_lib
snd_hwdep
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
usbhid
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
snd
hid
soundcore
usb_storage
hmac
evdev
mv643xx_eth
sha1_generic
inet_lro
ehci_hcd
libphy
mv_cesa
aes_generic
usbcore
usb_common
gpio_keys
ext4
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
sata_mv
libata
scsi_mod
** PCI devices:
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 13fd:1840 Initio Corporation Shintaro SH23SDOCK Hard Drive Docker [INIC-1608L]
Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet]
Bus 001 Device 005: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
-- System Information:
Debian Release: 7.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 3.2.0-4-kirkwood
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-kirkwood recommends:
ii firmware-linux-free 3.2
ii uboot-mkimage 2012.04.01-2
Versions of packages linux-image-3.2.0-4-kirkwood suggests:
pn debian-kernel-handbook <none>
pn fdutils <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-kirkwood is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-kirkwood/prerm/removing-running-kernel-3.2.0-4-kirkwood: true
linux-image-3.2.0-4-kirkwood/postinst/missing-firmware-3.2.0-4-kirkwood:
linux-image-3.2.0-4-kirkwood/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-kirkwood/postinst/depmod-error-initrd-3.2.0-4-kirkwood: false
Reply to: