[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#745635: linux-image-3.2.0-4-amd64: ALC 883 fail to hear sound separate on channels.



Package: src:linux
Version: 3.2.54-2
Severity: normal

Content of cat /proc/asound/*
cat: /proc/asound/CA0106: Is a directory
cat: /proc/asound/card0: Is a directory
cat: /proc/asound/card1: Is a directory
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfbff8000 irq 44
 1 [CA0106         ]: CA0106 - CA0106
                      Audigy SE [SB0570] at 0xec00 irq 16
  1:        : sequencer
  2: [ 1- 0]: raw midi
  3: [ 1- 3]: digital audio playback
  4: [ 1- 3]: digital audio capture
  5: [ 1- 2]: digital audio playback
  6: [ 1- 2]: digital audio capture
  7: [ 1- 1]: digital audio playback
  8: [ 1- 1]: digital audio capture
  9: [ 1- 0]: digital audio playback
 10: [ 1- 0]: digital audio capture
 11: [ 1]   : control
 12: [ 0- 2]: digital audio capture
 13: [ 0- 1]: digital audio playback
 14: [ 0- 0]: digital audio playback
 15: [ 0- 0]: digital audio capture
 16: [ 0- 0]: hardware dependent
 17: [ 0]   : control
 33:        : timer
00-00: HDA Codec 0
cat: /proc/asound/Intel: Is a directory
 0 snd_hda_intel
 1 snd_ca0106
cat: /proc/asound/oss: Is a directory
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-02: ALC883 Analog : ALC883 Analog : capture 1
01-00: ca0106 : CA0106 : playback 1 : capture 1
01-01: ca0106 : CA0106 : playback 1 : capture 1
01-02: ca0106 : CA0106 : playback 1 : capture 1
01-03: ca0106 : CA0106 : playback 1 : capture 1
cat: /proc/asound/seq: Is a directory
G0: system timer : 4000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
P0-1-0: PCM playback 0-1-0 : SLAVE
P0-2-1: PCM capture 0-2-1 : SLAVE
P1-0-0: PCM playback 1-0-0 : SLAVE
P1-0-1: PCM capture 1-0-1 : SLAVE
P1-1-0: PCM playback 1-1-0 : SLAVE
P1-1-1: PCM capture 1-1-1 : SLAVE
P1-2-0: PCM playback 1-2-0 : SLAVE
P1-2-1: PCM capture 1-2-1 : SLAVE
P1-3-0: PCM playback 1-3-0 : SLAVE
P1-3-1: PCM capture 1-3-1 : SLAVE
Advanced Linux Sound Architecture Driver Version 1.0.24.
On alsa modules CA0106 is normal and channels in separate ,and on ALC 883
stereo channels is together on alls channel.



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/system-debian_root ro quiet init=/bin/systemd

** Not tainted

** Kernel log:
[    5.036643] fuse init (API version 7.17)
[    5.108544] loop: module loaded
[    6.229142] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.229150] ACPI: Power Button [PWRB]
[    6.229217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.229222] ACPI: Power Button [PWRF]
[    6.233124] ACPI: Requesting acpi_cpufreq
[    6.267568] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[    6.267572] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.280759] iTCO_vendor_support: vendor-support=0
[    6.281523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.281634] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[    6.281710] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.297638] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.457773] coretemp coretemp.0: Using relative temperature scale!
[    6.457790] coretemp coretemp.0: Using relative temperature scale!
[    6.491755] [drm] Initialized drm 1.1.0 20060810
[    7.086787] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    7.290240] wmi: Mapper loaded
[    7.357175] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    7.357210] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.371273] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[    7.381948] nouveau 0000:01:00.0: setting latency timer to 64
[    7.381985] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046f00a3)
[    7.384812] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    7.464859] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    7.464863] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    7.464868] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    7.464872] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.43
[    7.464875] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[    7.464878] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[    7.465020] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    7.465024] [drm] nouveau 0000:01:00.0: DCB version 3.0
[    7.465027] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028
[    7.465031] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011310 00000028
[    7.465033] [drm] nouveau 0000:01:00.0: DCB outp 02: 01011312 00000000
[    7.465036] [drm] nouveau 0000:01:00.0: DCB outp 03: 020223f1 00c0c080
[    7.465039] [drm] nouveau 0000:01:00.0: DCB conn 00: 0000
[    7.465041] [drm] nouveau 0000:01:00.0: DCB conn 01: 1130
[    7.465044] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[    7.465047] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[    7.465049] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[    7.465057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0
[    7.465110] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F
[    7.480230] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD
[    7.480252] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38
[    7.481372] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91
[    7.481553] [TTM] Zone  kernel: Available graphics memory: 2030410 kiB
[    7.481557] [TTM] Initializing pool allocator
[    7.481563] [TTM] Initializing DMA pool allocator
[    7.481577] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR2)
[    7.481597] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[    7.487899] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    7.488288] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    7.550259] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.550263] [drm] No driver support for vblank timestamp query.
[    7.555306] hda_codec: ALC883: BIOS auto-probing.
[    7.558339] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    7.564168] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.872038] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[    7.872044] [drm] nouveau 0000:01:00.0: 0: core 550MHz shader 550MHz memory 540MHz fanspeed 100%
[    7.872048] [drm] nouveau 0000:01:00.0: c: core 199MHz memory 391MHz
[    7.873039] [drm] nouveau 0000:01:00.0: 0xD4A7: Parsing digital output script table
[    7.923323] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[    7.963631] Adding 2097148k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:2097148k 
[    8.028934] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88012742a000
[    8.029038] fbcon: nouveaufb (fb0) is primary device
[    8.043366] [drm] nouveau 0000:01:00.0: 0xD4A7: Parsing digital output script table
[    8.095697] Console: switching to colour frame buffer device 160x64
[    8.098065] fb0: nouveaufb frame buffer device
[    8.098068] drm: registered panic notifier
[    8.098080] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[    8.294719] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    8.944525] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/dm-2
[    9.029174] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/dm-2
[    9.406163] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[    9.474977] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/mapper/system-debian_home
[    9.475285] btrfs: disk space caching is enabled
[    9.820496] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    9.900317] Adding 2047996k swap on /dev/mapper/fedora_192--168--0--152-swap.  Priority:-2 extents:1 across:2047996k 
[   11.390070] RPC: Registered named UNIX socket transport module.
[   11.390074] RPC: Registered udp transport module.
[   11.390077] RPC: Registered tcp transport module.
[   11.390079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.498769] FS-Cache: Loaded
[   11.601858] FS-Cache: Netfs 'nfs' registered for caching
[   11.620237] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.843176] atl1 0000:02:00.0: irq 45 for MSI/MSI-X
[   11.843285] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[   12.744662] ossctl[1011] trap int3 ip:7f0c102d4c13 sp:7fffd1444b10 error:0
[   14.705656] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.567327] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.840018] eth0: no IPv6 routers present
[   23.009084] 8139too 0000:05:01.0: eth1: link down
[   23.009724] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   27.414603] postgres (1572): /proc/1572/oom_adj is deprecated, please use /proc/1572/oom_score_adj instead.
[   33.712047] eth0: no IPv6 routers present
[   45.988324] ata5.00: configured for UDMA/133
[   45.988331] ata5: EH complete
[   93.179817] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)

** Model information
sys_vendor: System manufacturer
product_name: P5K SE
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1402   
board_vendor: ASUSTeK Computer INC.
board_name: P5K SE
board_version: Rev 1.xx

** Loaded modules:
ip6table_filter
ip6_tables
xt_tcpudp
iptable_filter
binfmt_misc
ip_tables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
snd_hda_codec_realtek
nouveau
snd_ca0106
snd_hda_intel
snd_hda_codec
mxm_wmi
wmi
snd_ac97_codec
video
snd_seq_midi
snd_seq_midi_event
snd_hwdep
ttm
snd_rawmidi
snd_pcm
snd_seq
evdev
snd_page_alloc
snd_seq_device
drm_kms_helper
ac97_bus
drm
snd_timer
coretemp
snd
power_supply
serio_raw
pcspkr
iTCO_wdt
iTCO_vendor_support
i2c_i801
acpi_cpufreq
mperf
processor
button
soundcore
thermal_sys
i2c_algo_bit
i2c_core
asus_atk0110
cuse
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
jbd2
mbcache
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
usbhid
hid
sg
sd_mod
crc_t10dif
8139too
ata_generic
8139cp
floppy
ata_piix
pata_marvell
ahci
libahci
libata
uhci_hcd
atl1
mii
scsi_mod
ehci_hcd
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fc000000-fe8fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at c800 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at c880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at cc00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0400000-f07fffff
	Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: fe900000-fe9fffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at c080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at c400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at c480 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: feb00000-febfffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at ac00 [size=4]
	Region 2: I/O ports at a880 [size=8]
	Region 3: I/O ports at a800 [size=4]
	Region 4: I/O ports at a480 [size=16]
	Region 5: I/O ports at a400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0400 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at c000 [size=8]
	Region 1: I/O ports at bc00 [size=4]
	Region 2: I/O ports at b880 [size=8]
	Region 3: I/O ports at b800 [size=4]
	Region 4: I/O ports at b480 [size=16]
	Region 5: I/O ports at b400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81f3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at fe8e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
	Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
	Expansion ROM at fe9a0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: atl1

03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82a2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at dc00 [size=8]
	Region 1: I/O ports at d880 [size=4]
	Region 2: I/O ports at d800 [size=8]
	Region 3: I/O ports at d480 [size=4]
	Region 4: I/O ports at d400 [size=16]
	Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: pata_marvell

05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
	Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ec00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: snd_ca0106

05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at e800 [size=256]
	Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at febe0000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: 8139too


** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 04ca:0022 Lite-On Technology Corp. 
Bus 004 Device 002: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.52
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    16-2
ii  linux-base                              3.5
ii  module-init-tools                       16-2

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:


Reply to: