Bug#713943: Not fixed for me
I've installed jessie with linux-3.13.7-1 last night on my powermac7,3
(2x2.0 ghz). The fans are still crazy, even if i2c-powermac is build-in
(and not a module anymore).
I see the following messages in dmesg :
[ 0.961733] i2c i2c-3: i2c-powermac: modalias failure on
/u3@0,f8000000/i2c@f8001000/cereal@1c0
[ 0.961773] PowerMac i2c bus u3 0 registered
.....
.....
[ 1.348652] temperature temperature: PowerMac G5 Thermal control
driver 1.3
[ 1.348691] Detected fan controls:
[ 1.348696] 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
[ 1.348701] 1: RPM fan, id 2, location: DRIVE BAY
[ 1.348707] 2: PWM fan, id 2, location: SLOT,PCI FAN
[ 1.348712] 3: RPM fan, id 3, location: CPU A INTAKE
[ 1.348717] 4: RPM fan, id 4, location: CPU A EXHAUST
[ 1.348722] 5: RPM fan, id 5, location: CPU B INTAKE
[ 1.348727] 6: RPM fan, id 6, location: CPU B EXHAUST
[ 1.348769] i2c i2c-0: therm_pm72: attach_adapter method is deprecated
[ 1.348775] i2c i2c-0: Please use another way to instantiate your
i2c_client
[ 1.348782] i2c i2c-1: therm_pm72: attach_adapter method is deprecated
[ 1.348788] i2c i2c-1: Please use another way to instantiate your
i2c_client
[ 1.348795] i2c i2c-2: therm_pm72: attach_adapter method is deprecated
[ 1.348801] i2c i2c-2: Please use another way to instantiate your
i2c_client
[ 1.348808] i2c i2c-3: therm_pm72: attach_adapter method is deprecated
[ 1.348814] i2c i2c-3: Please use another way to instantiate your
i2c_client
[ 1.348825] i2c i2c-3: Failed to register i2c client therm_pm72 at
0x2f (-16)
[ 1.348830] therm_pm72: Failed to attach to i2c ID 0x15e
[ 1.348837] i2c i2c-4: therm_pm72: attach_adapter method is deprecated
[ 1.348843] i2c i2c-4: Please use another way to instantiate your
i2c_client
[ 1.348886] i2c i2c-4: Failed to register i2c client therm_pm72 at
0x2c (-16)
[ 1.348891] therm_pm72: Failed to attach to i2c ID 0x58
See the following dmesg :
[ 0.000000] Allocated 24576 bytes for 32 pacas at c00000000fffa000
[ 0.000000] DART table allocated at: c00000007f000000
[ 0.000000] Using PowerMac machine description
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12,
vmemmap = 24
[ 0.000000] Found initrd at 0xc000000001900000:0xc000000002792000
[ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000
revision: 0x37
[ 0.000000] Mapped at 0xd000080080000000
[ 0.000000] Found a K2 mac-io controller, rev: 96, mapped at
0xd000080080041000
[ 0.000000] PowerMac motherboard: PowerMac G5
[ 0.000000] DART IOMMU initialized for U3 type chipset
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Freed 20480 bytes for unused pacas
[ 0.000000] Starting Linux PPC64 #1 SMP Debian 3.13.7-1 (2014-03-25)
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] physicalMemorySize = 0x80000000
[ 0.000000] htab_address = 0xc00000007c000000
[ 0.000000] htab_hash_mask = 0x3ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13-1-powerpc64
(debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) )
#1 SMP Debian 3.13.7-1 (2014-03-25)
[ 0.000000] [boot]0012 Setup Arch
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255
[ 0.000000] PCI host bridge /pci@0,f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff ->
0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff ->
0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x000000009fffffff ->
0x0000000090000000
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1740, gen1=1741
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x7fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x7fffffff]
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] DMA zone: 7168 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 524288 pages, LIFO batch:31
[ 0.000000] [boot]0015 Setup Done
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c000000002900000 s24832 r0
d32512 u524288
[ 0.000000] pcpu-alloc: s24832 r0 d32512 u524288 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 517120
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line:
root=/ht@0,f2000000/pci@5/k2-sata-root@c/@1/@0:3 ro root=/dev/sdb3
video=offb:off video=radeonfb:off radeon.agpmode=-1 radeon.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 1986800K/2097152K available (7108K kernel code,
1200K rwdata, 1680K rodata, 556K init, 2148K bss, 110352K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at
80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 120 sources
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at
f8040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 124 sources
[ 0.000000] /u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56
[ 0.000000] time_init: decrementer frequency = 33.333333 MHz
[ 0.000000] time_init: processor frequency = 2000.000000 MHz
[ 0.000000] clocksource: timebase mult[1e000005] shift[24] registered
[ 0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [udbg0] disabled
[ 0.002554] pid_max: default: 32768 minimum: 301
[ 0.002716] Security Framework initialized
[ 0.002727] AppArmor: AppArmor disabled by boot time parameter
[ 0.002732] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003094] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.005193] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.006233] Mount-cache hash table entries: 256
[ 0.010175] Initializing cgroup subsys memory
[ 0.010700] Initializing cgroup subsys devices
[ 0.010715] Initializing cgroup subsys freezer
[ 0.010721] Initializing cgroup subsys blkio
[ 0.010727] Initializing cgroup subsys perf_event
[ 0.011461] PowerMac SMP probe found 2 cpus
[ 0.011594] KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
[ 0.011602] channel 0 bus <multibus>
[ 0.011607] channel 1 bus <multibus>
[ 0.011642] KeyWest i2c @0x80018000 irq 26
/ht@0,f2000000/pci@1/mac-io@7/i2c@18000
[ 0.011650] channel 0 bus <multibus>
[ 0.011661] PMU i2c /ht@0,f2000000/pci@1/mac-io@7/via-pmu@16000/pmu-i2c
[ 0.011669] channel 1 bus <multibus>
[ 0.011674] channel 2 bus <multibus>
[ 0.011737] Processor timebase sync using Pulsar i2c clock
[ 0.011745] mpic: requesting IPIs...
[ 0.011809] PPC970/FX/MP performance monitor hardware support registered
[ 0.055394] Brought up 2 CPUs
[ 0.057265] devtmpfs: initialized
[ 0.108379] EEH: devices created
[ 0.108837] NET: Registered protocol family 16
[ 0.108866] eeh_init: Platform EEH operation not found
[ 0.108958] IBM eBus Device Driver
[ 0.109418] cpuidle: using governor ladder
[ 0.109427] cpuidle: using governor menu
[ 0.109511] CPU Hotplug not supported by firmware - disabling.
[ 0.110535] PCI: Probing PCI hardware
[ 0.110673] PCI host bridge to bus 0000:f0
[ 0.110683] pci_bus 0000:f0: root bus resource [io 0x10000-0x80ffff]
(bus address [0x0000-0x7fffff])
[ 0.110692] pci_bus 0000:f0: root bus resource [mem
0xf1000000-0xf1ffffff]
[ 0.110699] pci_bus 0000:f0: root bus resource [mem
0x90000000-0x9fffffff]
[ 0.110707] pci_bus 0000:f0: root bus resource [bus f0-ff]
[ 0.110716] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to ff
[ 0.110743] pci 0000:f0:0b.0: [106b:0059] type 00 class 0x060000
[ 0.110880] pci 0000:f0:10.0: [1002:4150] type 00 class 0x030000
[ 0.110901] pci 0000:f0:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref]
[ 0.110912] pci 0000:f0:10.0: reg 0x14: [io 0x10400-0x104ff]
[ 0.110922] pci 0000:f0:10.0: reg 0x18: [mem 0x90000000-0x9000ffff]
[ 0.110952] pci 0000:f0:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref]
[ 0.110993] pci 0000:f0:10.0: supports D1 D2
[ 0.147861] IOMMU table initialized, virtual merging enabled
[ 0.147921] pci_bus 0000:f0: busn_res: [bus f0-ff] end is updated to f0
[ 0.148027] PCI host bridge to bus 0001:00
[ 0.148035] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff]
(bus address [0x0000-0x3fffff])
[ 0.148043] pci_bus 0001:00: root bus resource [mem
0xfa000000-0xffffffff]
[ 0.148050] pci_bus 0001:00: root bus resource [mem
0x80000000-0x8fffffff]
[ 0.148056] pci_bus 0001:00: root bus resource [mem
0xa0000000-0xefffffff]
[ 0.148063] pci_bus 0001:00: root bus resource [bus 00-ef]
[ 0.148072] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff
[ 0.148090] pci 0001:00:00.0: [106b:0057] type 00 class 0x060000
[ 0.148179] pci 0001:00:01.0: [106b:0045] type 01 class 0x060400
[ 0.148296] pci 0001:00:02.0: [106b:0046] type 01 class 0x060400
[ 0.148398] pci 0001:00:03.0: [106b:0047] type 01 class 0x060400
[ 0.148502] pci 0001:00:04.0: [106b:0048] type 01 class 0x060400
[ 0.148605] pci 0001:00:05.0: [106b:0049] type 01 class 0x060400
[ 0.148787] pci 0001:01:07.0: [106b:0041] type 00 class 0xff0000
[ 0.148799] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.148896] pci 0001:01:08.0: [106b:0040] type 00 class 0x0c0310
[ 0.148908] pci 0001:01:08.0: reg 0x10: [mem 0x80081000-0x80081fff]
[ 0.148999] pci 0001:01:09.0: [106b:0040] type 00 class 0x0c0310
[ 0.149011] pci 0001:01:09.0: reg 0x10: [mem 0x80080000-0x80080fff]
[ 0.149103] pci 0001:00:01.0: PCI bridge to [bus 01]
[ 0.149115] pci 0001:00:01.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.149121] pci 0001:00:01.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.149240] pci 0001:05:0b.0: [1033:0035] type 00 class 0x0c0310
[ 0.149255] pci 0001:05:0b.0: reg 0x10: [mem 0x80702000-0x80702fff]
[ 0.149309] pci 0001:05:0b.0: supports D1 D2
[ 0.149313] pci 0001:05:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149391] pci 0001:05:0b.1: [1033:0035] type 00 class 0x0c0310
[ 0.149406] pci 0001:05:0b.1: reg 0x10: [mem 0x80701000-0x80701fff]
[ 0.149460] pci 0001:05:0b.1: supports D1 D2
[ 0.149464] pci 0001:05:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149538] pci 0001:05:0b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.149553] pci 0001:05:0b.2: reg 0x10: [mem 0x80700000-0x807000ff]
[ 0.149607] pci 0001:05:0b.2: supports D1 D2
[ 0.149610] pci 0001:05:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.149688] pci 0001:00:02.0: PCI bridge to [bus 05]
[ 0.149701] pci 0001:00:02.0: bridge window [mem 0x80700000-0x807fffff]
[ 0.149707] pci 0001:00:02.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.149823] pci 0001:02:0d.0: [106b:0043] type 00 class 0xff0000
[ 0.149834] pci 0001:02:0d.0: reg 0x10: [mem 0x80104000-0x80107fff]
[ 0.149929] pci 0001:02:0e.0: [106b:0042] type 00 class 0x0c0010
[ 0.149943] pci 0001:02:0e.0: reg 0x10: [mem 0x80100000-0x80100fff]
[ 0.149992] pci 0001:02:0e.0: supports D1 D2
[ 0.149995] pci 0001:02:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.150083] pci 0001:00:03.0: PCI bridge to [bus 02]
[ 0.150095] pci 0001:00:03.0: bridge window [mem 0x80100000-0x801fffff]
[ 0.150101] pci 0001:00:03.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.150203] pci 0001:03:0f.0: [106b:004c] type 00 class 0x020000
[ 0.150215] pci 0001:03:0f.0: reg 0x10: [mem 0x80400000-0x805fffff]
[ 0.150245] pci 0001:03:0f.0: reg 0x30: [mem 0x80200000-0x802fffff pref]
[ 0.150310] pci 0001:00:04.0: PCI bridge to [bus 03]
[ 0.150323] pci 0001:00:04.0: bridge window [mem 0x80200000-0x805fffff]
[ 0.150329] pci 0001:00:04.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.150412] pci 0001:04:0c.0: [1166:0240] type 00 class 0x01018f
[ 0.150423] pci 0001:04:0c.0: reg 0x10: [io 0x811000-0x811007]
[ 0.150431] pci 0001:04:0c.0: reg 0x14: [io 0x811000-0x811003]
[ 0.150440] pci 0001:04:0c.0: reg 0x18: [io 0x811000-0x811007]
[ 0.150448] pci 0001:04:0c.0: reg 0x1c: [io 0x811000-0x811003]
[ 0.150456] pci 0001:04:0c.0: reg 0x20: [io 0x811000-0x81100f]
[ 0.150464] pci 0001:04:0c.0: reg 0x24: [mem 0x80600000-0x80601fff]
[ 0.150542] pci 0001:00:05.0: PCI bridge to [bus 04]
[ 0.150554] pci 0001:00:05.0: bridge window [mem 0x80600000-0x806fffff]
[ 0.150560] pci 0001:00:05.0: bridge window [mem
0x00000000-0x000fffff pref]
[ 0.150597] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 05
[ 0.150696] PCI 0000:f0 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.150705] pci_bus 0000:f0: resource 4 [io 0x10000-0x80ffff]
[ 0.150709] pci_bus 0000:f0: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.150713] pci_bus 0000:f0: resource 6 [mem 0x90000000-0x9fffffff]
[ 0.150743] pci 0001:00:01.0: PCI bridge to [bus 01]
[ 0.150750] pci 0001:00:01.0: bridge window [mem 0x80000000-0x800fffff]
[ 0.150759] pci 0001:00:02.0: PCI bridge to [bus 05]
[ 0.150766] pci 0001:00:02.0: bridge window [mem 0x80700000-0x807fffff]
[ 0.150775] pci 0001:00:03.0: PCI bridge to [bus 02]
[ 0.150782] pci 0001:00:03.0: bridge window [mem 0x80100000-0x801fffff]
[ 0.150790] pci 0001:00:04.0: PCI bridge to [bus 03]
[ 0.150797] pci 0001:00:04.0: bridge window [mem 0x80200000-0x805fffff]
[ 0.150806] pci 0001:00:05.0: PCI bridge to [bus 04]
[ 0.150813] pci 0001:00:05.0: bridge window [mem 0x80600000-0x806fffff]
[ 0.150822] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff]
[ 0.150826] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
[ 0.150830] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.150834] pci_bus 0001:00: resource 7 [mem 0xa0000000-0xefffffff]
[ 0.150838] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
[ 0.150842] pci_bus 0001:05: resource 1 [mem 0x80700000-0x807fffff]
[ 0.150846] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff]
[ 0.150850] pci_bus 0001:03: resource 1 [mem 0x80200000-0x805fffff]
[ 0.150854] pci_bus 0001:04: resource 1 [mem 0x80600000-0x806fffff]
[ 0.150857] PCI: Probing PCI hardware done
[ 0.153361] opal: Node not found
[ 0.154936] bio: create slab <bio-0> at 0
[ 0.155323] vgaarb: device added:
PCI:0000:f0:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.155358] vgaarb: loaded
[ 0.155362] vgaarb: bridge control possible 0000:f0:10.0
[ 0.155621] SCSI subsystem initialized
[ 0.155747] libata version 3.00 loaded.
[ 0.156046] Switched to clocksource timebase
[ 0.163215] NET: Registered protocol family 2
[ 0.163714] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.163883] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.164286] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.164412] TCP: reno registered
[ 0.164430] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.164474] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.164706] NET: Registered protocol family 1
[ 0.164742] PCI: CLS mismatch (32 != 64), using 128 bytes
[ 0.164781] pci 0001:01:08.0: enabling device (0000 -> 0002)
[ 0.220089] pci 0001:01:09.0: enabling device (0000 -> 0002)
[ 0.276066] pci 0001:05:0b.0: enabling device (0000 -> 0002)
[ 0.332060] pci 0001:05:0b.1: enabling device (0000 -> 0002)
[ 0.388060] pci 0001:05:0b.2: enabling device (0004 -> 0006)
[ 0.388198] Unpacking initramfs...
[ 0.888992] Freeing initrd memory: 14920K (c000000001900000 -
c000000002792000)
[ 0.889506] Hypercall H_BEST_ENERGY not supported
[ 0.889996] audit: initializing netlink socket (disabled)
[ 0.890033] type=2000 audit(1398070747.847:1): initialized
[ 0.937669] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 0.938239] VFS: Disk quotas dquot_6.5.2
[ 0.938298] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.938561] msgmni has been set to 3911
[ 0.939283] alg: No test for stdrng (krng)
[ 0.939366] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.939449] io scheduler noop registered
[ 0.939455] io scheduler deadline registered
[ 0.939495] io scheduler cfq registered (default)
[ 0.940014] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.940432] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<benh@kernel.crashing.org>)
[ 0.940461] Linux agpgart interface v0.103
[ 0.940485] agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset
[ 0.945209] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
[ 0.945298] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
[ 0.945424] MacIO PCI driver attached to K2 chipset
[ 0.946027] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.946253] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23,
base_baud = 230400) is a Z85c30 ESCC - Serial port
[ 0.946529] pata-pci-macio 0001:02:0d.0: enabling device (0014 -> 0016)
[ 0.960074] pata-pci-macio 0001:02:0d.0: Activating pata-macio
chipset K2 ATA-6, Apple bus ID 3
[ 0.960407] scsi0 : pata_macio
[ 0.960532] ata1: PATA max UDMA/100 irq 39
[ 0.960751] mousedev: PS/2 mouse device common for all mice
[ 0.961126] rtc-generic rtc-generic: rtc core: registered rtc-generic
as rtc0
[ 0.961186] PowerMac i2c bus pmu 2 registered
[ 0.961222] PowerMac i2c bus pmu 1 registered
[ 0.961258] PowerMac i2c bus mac-io 0 registered
[ 0.961665] PowerMac i2c bus u3 1 registered
[ 0.961733] i2c i2c-3: i2c-powermac: modalias failure on
/u3@0,f8000000/i2c@f8001000/cereal@1c0
[ 0.961773] PowerMac i2c bus u3 0 registered
[ 0.999896] Registering G5 CPU frequency driver
[ 0.999905] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
[ 0.999911] Low: 1800 Mhz, High: 2000 Mhz, Cur: 1800 MHz
[ 1.011518] TCP: cubic registered
[ 1.011645] NET: Registered protocol family 10
[ 1.012026] mip6: Mobile IPv6
[ 1.012036] NET: Registered protocol family 17
[ 1.012072] mpls_gso: MPLS GSO support
[ 1.012141] PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff]
[ 1.012385] registered taskstats version 1
[ 1.012909] input: PMU as /devices/virtual/input/input0
[ 1.013260] rtc-generic rtc-generic: setting system clock to
2014-04-21 08:59:08 UTC (1398070748)
[ 1.013270] PM: Hibernation image not present or could not be loaded.
[ 1.124429] ata1.00: ATAPI: SONY DVD RW DW-Q28A, KAS7, max UDMA/66
[ 1.140375] ata1.00: configured for UDMA/66
[ 1.142791] scsi 0:0:0:0: CD-ROM SONY DVD RW DW-Q28A
KAS7 PQ: 0 ANSI: 5
[ 1.142818] ata1.00: K2/Shasta alignment limits applied
[ 1.143486] Freeing unused kernel memory: 556K (c00000000089c000 -
c000000000927000)
[ 1.172434] systemd-udevd[58]: starting version 204
[ 1.229424] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 1.231830] gem 0001:03:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT
Ethernet 00:14:51:03:bd:56
[ 1.266987] sata_svw 0001:04:0c.0: version 2.3
[ 1.268974] usbcore: registered new interface driver usbfs
[ 1.269022] usbcore: registered new interface driver hub
[ 1.269933] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 1.269961] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.270202] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.272782] firewire_ohci 0001:02:0e.0: enabling device (0000 -> 0002)
[ 1.273011] scsi1 : sata_svw
[ 1.273834] usbcore: registered new device driver usb
[ 1.275752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.277203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.277216] ehci-pci: EHCI PCI platform driver
[ 1.277371] ehci-pci 0001:05:0b.2: EHCI Host Controller
[ 1.277409] ehci-pci 0001:05:0b.2: new USB bus registered, assigned
bus number 1
[ 1.277514] ehci-pci 0001:05:0b.2: irq 63, io mem 0x80700000
[ 1.277686] ohci-pci: OHCI PCI platform driver
[ 1.280145] scsi2 : sata_svw
[ 1.283564] scsi3 : sata_svw
[ 1.286667] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.288134] ehci-pci 0001:05:0b.2: USB 2.0 started, EHCI 1.00
[ 1.288319] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.288327] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.288335] usb usb1: Product: EHCI Host Controller
[ 1.288341] usb usb1: Manufacturer: Linux 3.13-1-powerpc64 ehci_hcd
[ 1.288347] usb usb1: SerialNumber: 0001:05:0b.2
[ 1.288693] hub 1-0:1.0: USB hub found
[ 1.288729] hub 1-0:1.0: 5 ports detected
[ 1.288853] scsi4 : sata_svw
[ 1.288985] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600000 irq 17
[ 1.288995] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600100 irq 17
[ 1.289004] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600200 irq 17
[ 1.289013] ata5: SATA max UDMA/133 mmio m8192@0x80600000 port
0x80600300 irq 17
[ 1.289284] ohci-pci 0001:01:08.0: OHCI PCI host controller
[ 1.289310] ohci-pci 0001:01:08.0: new USB bus registered, assigned
bus number 2
[ 1.289403] ohci-pci 0001:01:08.0: irq 27, io mem 0x80081000
[ 1.328264] firewire_ohci 0001:02:0e.0: added OHCI v1.0 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.348652] temperature temperature: PowerMac G5 Thermal control
driver 1.3
[ 1.348691] Detected fan controls:
[ 1.348696] 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
[ 1.348701] 1: RPM fan, id 2, location: DRIVE BAY
[ 1.348707] 2: PWM fan, id 2, location: SLOT,PCI FAN
[ 1.348712] 3: RPM fan, id 3, location: CPU A INTAKE
[ 1.348717] 4: RPM fan, id 4, location: CPU A EXHAUST
[ 1.348722] 5: RPM fan, id 5, location: CPU B INTAKE
[ 1.348727] 6: RPM fan, id 6, location: CPU B EXHAUST
[ 1.348769] i2c i2c-0: therm_pm72: attach_adapter method is deprecated
[ 1.348775] i2c i2c-0: Please use another way to instantiate your
i2c_client
[ 1.348782] i2c i2c-1: therm_pm72: attach_adapter method is deprecated
[ 1.348788] i2c i2c-1: Please use another way to instantiate your
i2c_client
[ 1.348795] i2c i2c-2: therm_pm72: attach_adapter method is deprecated
[ 1.348801] i2c i2c-2: Please use another way to instantiate your
i2c_client
[ 1.348808] i2c i2c-3: therm_pm72: attach_adapter method is deprecated
[ 1.348814] i2c i2c-3: Please use another way to instantiate your
i2c_client
[ 1.348825] i2c i2c-3: Failed to register i2c client therm_pm72 at
0x2f (-16)
[ 1.348830] therm_pm72: Failed to attach to i2c ID 0x15e
[ 1.348837] i2c i2c-4: therm_pm72: attach_adapter method is deprecated
[ 1.348843] i2c i2c-4: Please use another way to instantiate your
i2c_client
[ 1.348886] i2c i2c-4: Failed to register i2c client therm_pm72 at
0x2c (-16)
[ 1.348891] therm_pm72: Failed to attach to i2c ID 0x58
[ 1.368028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.368059] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.368067] usb usb2: Product: OHCI PCI host controller
[ 1.368073] usb usb2: Manufacturer: Linux 3.13-1-powerpc64 ohci_hcd
[ 1.368079] usb usb2: SerialNumber: 0001:01:08.0
[ 1.368337] hub 2-0:1.0: USB hub found
[ 1.368369] hub 2-0:1.0: 2 ports detected
[ 1.368606] ohci-pci 0001:01:09.0: OHCI PCI host controller
[ 1.368622] ohci-pci 0001:01:09.0: new USB bus registered, assigned
bus number 3
[ 1.368690] ohci-pci 0001:01:09.0: irq 28, io mem 0x80080000
[ 1.443952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.443967] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.443975] usb usb3: Product: OHCI PCI host controller
[ 1.443981] usb usb3: Manufacturer: Linux 3.13-1-powerpc64 ohci_hcd
[ 1.443987] usb usb3: SerialNumber: 0001:01:09.0
[ 1.444260] hub 3-0:1.0: USB hub found
[ 1.444284] hub 3-0:1.0: 2 ports detected
[ 1.444498] ohci-pci 0001:05:0b.0: OHCI PCI host controller
[ 1.444513] ohci-pci 0001:05:0b.0: new USB bus registered, assigned
bus number 4
[ 1.444558] ohci-pci 0001:05:0b.0: irq 63, io mem 0x80702000
[ 1.519937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.519949] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.519957] usb usb4: Product: OHCI PCI host controller
[ 1.519962] usb usb4: Manufacturer: Linux 3.13-1-powerpc64 ohci_hcd
[ 1.519969] usb usb4: SerialNumber: 0001:05:0b.0
[ 1.520211] hub 4-0:1.0: USB hub found
[ 1.520231] hub 4-0:1.0: 3 ports detected
[ 1.520474] ohci-pci 0001:05:0b.1: OHCI PCI host controller
[ 1.520489] ohci-pci 0001:05:0b.1: new USB bus registered, assigned
bus number 5
[ 1.520531] ohci-pci 0001:05:0b.1: irq 63, io mem 0x80701000
[ 1.595917] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.595927] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.595934] usb usb5: Product: OHCI PCI host controller
[ 1.595940] usb usb5: Manufacturer: Linux 3.13-1-powerpc64 ohci_hcd
[ 1.595946] usb usb5: SerialNumber: 0001:05:0b.1
[ 1.596189] hub 5-0:1.0: USB hub found
[ 1.596212] hub 5-0:1.0: 2 ports detected
[ 1.612114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.620528] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.620537] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.636497] ata2.00: configured for UDMA/133
[ 1.636708] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC38
PQ: 0 ANSI: 5
[ 1.636981] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.828257] firewire_core 0001:02:0e.0: created device fw0: GUID
001451fffe03bd56, S800
[ 1.956094] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.965302] ata3.00: ATA-7: Maxtor 6L300S0, BACE1G20, max UDMA/133
[ 1.965310] ata3.00: 586114704 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.981302] ata3.00: configured for UDMA/133
[ 1.981485] scsi 2:0:0:0: Direct-Access ATA Maxtor 6L300S0
BACE PQ: 0 ANSI: 5
[ 1.981732] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.310886] ata4: SATA link down (SStatus 4 SControl 300)
[ 2.568070] usb 5-2: new full-speed USB device number 2 using ohci-pci
[ 2.638882] ata5: SATA link down (SStatus 4 SControl 300)
[ 2.660968] sd 2:0:0:0: [sdb] 586114704 512-byte logical blocks: (300
GB/279 GiB)
[ 2.661012] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 2.661146] sd 1:0:0:0: [sda] Write Protect is off
[ 2.661154] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.661190] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.661197] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.661233] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.661411] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.684095] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[ 2.684866] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.688622] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 2.689443] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.779008] usb 5-2: New USB device found, idVendor=05e3, idProduct=0604
[ 2.779023] usb 5-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.779030] usb 5-2: Product: USB Hub
[ 2.782119] hub 5-2:1.0: USB hub found
[ 2.785018] hub 5-2:1.0: 4 ports detected
[ 2.976170] usb 4-1: new full-speed USB device number 2 using ohci-pci
[ 3.263977] usb 4-1: New USB device found, idVendor=0763, idProduct=2012
[ 3.263993] usb 4-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.263999] usb 4-1: Product: FastTrack Pro
[ 3.264005] usb 4-1: Manufacturer: M-Audio
[ 4.077090] random: nonblocking pool is initialized
[ 4.133918] usb 5-2.2: new low-speed USB device number 3 using ohci-pci
[ 4.182496] PM: Starting manual resume from disk
[ 4.182513] PM: Hibernation image partition 8:20 present
[ 4.182516] PM: Looking for hibernation image.
[ 4.182820] PM: Image not found (code -22)
[ 4.182823] PM: Hibernation image not present or could not be loaded.
[ 4.233689] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.248957] usb 5-2.2: New USB device found, idVendor=056a,
idProduct=0069
[ 4.248976] usb 5-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.248983] usb 5-2.2: Product: CTF-430 V2.0-0
[ 4.248989] usb 5-2.2: Manufacturer: WACOM
[ 4.333907] usb 5-2.3: new full-speed USB device number 4 using ohci-pci
[ 4.432888] usb 5-2.3: not running at top speed; connect to a high
speed hub
[ 4.456937] usb 5-2.3: New USB device found, idVendor=05ac,
idProduct=1006
[ 4.456953] usb 5-2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4.456960] usb 5-2.3: Product: Keyboard Hub
[ 4.456966] usb 5-2.3: Manufacturer: Apple, Inc.
[ 4.456971] usb 5-2.3: SerialNumber: 000000000000
[ 4.459932] hub 5-2.3:1.0: USB hub found
[ 4.462879] hub 5-2.3:1.0: 3 ports detected
[ 4.765886] usb 5-2.3.2: new low-speed USB device number 5 using ohci-pci
[ 4.879856] usb 5-2.3.2: New USB device found, idVendor=05ac,
idProduct=0250
[ 4.879871] usb 5-2.3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.879879] usb 5-2.3.2: Product: Apple Keyboard
[ 4.879885] usb 5-2.3.2: Manufacturer: Apple Inc.
[ 4.961888] usb 5-2.3.3: new full-speed USB device number 6 using
ohci-pci
[ 5.081857] usb 5-2.3.3: New USB device found, idVendor=046d,
idProduct=c52f
[ 5.081873] usb 5-2.3.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.081881] usb 5-2.3.3: Product: USB Receiver
[ 5.081886] usb 5-2.3.3: Manufacturer: Logitech
[ 5.509141] systemd-udevd[325]: starting version 204
[ 6.417111] [drm] Initialized drm 1.1.0 20060810
[ 6.988110] [drm] radeon kernel modesetting enabled.
[ 6.988232] radeon 0000:f0:10.0: enabling device (0006 -> 0007)
[ 6.988596] [drm] initializing kernel modesetting (RV350
0x1002:0x4150 0x1002:0x4150).
[ 6.988619] [drm] Forcing AGP to PCI mode
[ 6.988637] [drm] register mmio base: 0x90000000
[ 6.988641] [drm] register mmio size: 65536
[ 6.988713] radeon 0000:f0:10.0: Invalid ROM contents
[ 7.088953] [drm] Not an x86 BIOS ROM, not using.
[ 7.089016] [drm] Using device-tree clock info
[ 7.089023] [drm] Generation 2 PCI interface, using max accessible memory
[ 7.089035] radeon 0000:f0:10.0: VRAM: 128M 0x0000000098000000 -
0x000000009FFFFFFF (128M used)
[ 7.089044] radeon 0000:f0:10.0: GTT: 512M 0x0000000078000000 -
0x0000000097FFFFFF
[ 7.089081] [drm] Detected VRAM RAM=128M, BAR=128M
[ 7.089086] [drm] RAM width 128bits DDR
[ 7.089242] [TTM] Zone kernel: Available graphics memory: 1001648 kiB
[ 7.089249] [TTM] Initializing pool allocator
[ 7.089335] [drm] radeon: 128M of VRAM memory ready
[ 7.089341] [drm] radeon: 512M of GTT memory ready.
[ 7.089392] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.091632] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 7.092853] [drm] PCI GART of 512M enabled (table at 0x0000000060300000).
[ 7.092961] radeon 0000:f0:10.0: WB enabled
[ 7.092980] radeon 0000:f0:10.0: fence driver on ring 0 use gpu addr
0x0000000078000000 and cpu addr 0xc000000078f14000
[ 7.092998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.093004] [drm] Driver supports precise vblank timestamp query.
[ 7.093051] [drm] radeon: irq initialized.
[ 7.093081] [drm] Loading R300 Microcode
[ 7.139796] radeon 0000:f0:10.0: firmware: failed to load
radeon/R300_cp.bin (-2)
[ 7.139810] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 7.139817] radeon 0000:f0:10.0: failed initializing CP (-2).
[ 7.139830] radeon 0000:f0:10.0: Disabling GPU acceleration
[ 7.139838] [drm] radeon: cp finalized
[ 7.141478] i2c i2c-5: therm_pm72: attach_adapter method is deprecated
[ 7.141493] i2c i2c-5: Please use another way to instantiate your
i2c_client
[ 7.141589] i2c i2c-6: therm_pm72: attach_adapter method is deprecated
[ 7.141597] i2c i2c-6: Please use another way to instantiate your
i2c_client
[ 7.141690] i2c i2c-7: therm_pm72: attach_adapter method is deprecated
[ 7.141697] i2c i2c-7: Please use another way to instantiate your
i2c_client
[ 7.141761] [drm] Connector Table: 12 (mac g5 9600)
[ 7.141776] [drm] No valid Ext TMDS info found in BIOS
[ 7.141783] [drm] No TV DAC info found in BIOS
[ 7.141990] [drm] No TMDS info found in BIOS
[ 7.142261] [drm] Radeon Display Connectors
[ 7.142268] [drm] Connector 0:
[ 7.142273] [drm] DVI-I-1
[ 7.142277] [drm] HPD1
[ 7.142282] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 7.142287] [drm] Encoders:
[ 7.142291] [drm] DFP2: INTERNAL_DVO1
[ 7.142295] [drm] CRT2: INTERNAL_DAC2
[ 7.142299] [drm] Connector 1:
[ 7.142304] [drm] DVI-I-2
[ 7.142307] [drm] HPD2
[ 7.142312] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 7.142317] [drm] Encoders:
[ 7.142320] [drm] DFP1: INTERNAL_TMDS1
[ 7.142325] [drm] CRT1: INTERNAL_DAC1
[ 7.142329] [drm] Connector 2:
[ 7.142333] [drm] SVIDEO-1
[ 7.142336] [drm] Encoders:
[ 7.142340] [drm] TV1: INTERNAL_DAC2
[ 7.211869] [drm] fb mappable at 0x98040000
[ 7.211883] [drm] vram apper at 0x98000000
[ 7.211887] [drm] size 5242880
[ 7.211891] [drm] fb depth is 24
[ 7.211895] [drm] pitch is 5120
[ 7.312288] Console: switching to colour frame buffer device 128x48
[ 7.329124] radeon 0000:f0:10.0: fb0: radeondrmfb frame buffer device
[ 7.329309] radeon 0000:f0:10.0: registered panic notifier
[ 7.329476] [drm] Initialized radeon 2.36.0 20080528 for 0000:f0:10.0
on minor 0
[ 7.627959] input: Wacom Bamboo1 as
/devices/pci0001:00/0001:00:02.0/0001:05:0b.1/usb5/5-2/5-2.2/5-2.2:1.0/input/input1
[ 7.631284] usbcore: registered new interface driver wacom
[ 7.655717] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.707954] usbcore: registered new interface driver usbhid
[ 7.708179] usbhid: USB HID core driver
[ 7.744319] input: Logitech USB Receiver as
/devices/pci0001:00/0001:00:02.0/0001:05:0b.1/usb5/5-2/5-2.3/5-2.3.3/5-2.3.3:1.0/input/input3
[ 7.744634] input: Apple Inc. Apple Keyboard as
/devices/pci0001:00/0001:00:02.0/0001:05:0b.1/usb5/5-2/5-2.3/5-2.3.2/5-2.3.2:1.0/input/input2
[ 7.744901] apple 0003:05AC:0250.0001: input,hidraw0: USB HID v1.11
Keyboard [Apple Inc. Apple Keyboard] on usb-0001:05:0b.1-2.3.2/input0
[ 7.746836] input: Apple Inc. Apple Keyboard as
/devices/pci0001:00/0001:00:02.0/0001:05:0b.1/usb5/5-2/5-2.3/5-2.3.2/5-2.3.2:1.1/input/input4
[ 7.756230] hid-generic 0003:046D:C52F.0003: input,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0001:05:0b.1-2.3.3/input0
[ 7.756474] apple 0003:05AC:0250.0002: input,hidraw2: USB HID v1.11
Device [Apple Inc. Apple Keyboard] on usb-0001:05:0b.1-2.3.2/input1
[ 7.760917] input: Logitech USB Receiver as
/devices/pci0001:00/0001:00:02.0/0001:05:0b.1/usb5/5-2/5-2.3/5-2.3.3/5-2.3.3:1.1/input/input5
[ 7.764566] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3:
USB HID v1.11 Device [Logitech USB Receiver] on
usb-0001:05:0b.1-2.3.3/input1
[ 8.163131] usb-audio: Fast Track Pro switching to config #2
[ 8.173015] snd-usb-audio: probe of 4-1:1.0 failed with error -5
[ 8.188710] usb-audio: Fast Track Pro config OK
[ 8.305970] usbcore: registered new interface driver snd-usb-audio
[ 9.989711] Adding 5868160k swap on /dev/sdb4. Priority:-1 extents:1
across:5868160k
[ 10.072492] EXT4-fs (sdb3): re-mounted. Opts: (null)
[ 10.402937] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 12.442251] lp: driver loaded but no devices found
[ 12.581799] snd-powermac no longer handles any machines with a
layout-id property in the device-tree, use snd-aoa.
[ 12.657201] fuse init (API version 7.22)
[ 12.777629] EXT4-fs (sdb5): mounted filesystem with ordered data
mode. Opts: (null)
[ 14.083028] RPC: Registered named UNIX socket transport module.
[ 14.092677] RPC: Registered udp transport module.
[ 14.102069] RPC: Registered tcp transport module.
[ 14.111069] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.137307] FS-Cache: Loaded
[ 14.179648] FS-Cache: Netfs 'nfs' registered for caching
[ 14.248899] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.572390] sungem_phy: PHY ID: 2062e0, addr: 1
[ 14.572646] gem 0001:03:0f.0 eth0: Found BCM5421-K2 PHY
[ 14.581034] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.794088] Bluetooth: Core ver 2.17
[ 17.803905] NET: Registered protocol family 31
[ 17.811601] Bluetooth: HCI device and connection manager initialized
[ 17.819732] Bluetooth: HCI socket layer initialized
[ 17.828133] Bluetooth: L2CAP socket layer initialized
[ 17.836284] Bluetooth: SCO socket layer initialized
[ 17.869592] Bluetooth: RFCOMM TTY layer initialized
[ 17.877143] Bluetooth: RFCOMM socket layer initialized
[ 17.882102] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.882103] Bluetooth: BNEP filters: protocol multicast
[ 17.882121] Bluetooth: BNEP socket layer initialized
[ 17.908118] Bluetooth: RFCOMM ver 1.11
[ 18.192224] gem 0001:03:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 18.199850] gem 0001:03:0f.0 eth0: Pause is enabled (rxfifo: 10240
off: 7168 on: 5632)
[ 18.207378] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.892544] systemd-logind[2633]: New seat seat0.
[ 22.895481] systemd-logind[2633]: New session c1 of user lightdm.
[ 22.895755] systemd-logind[2633]: Linked /tmp/.X11-unix/X0 to
/run/user/111/X11-display.
[ 48.327362] systemd-logind[2633]: New session 1 of user jessie.
[ 48.327622] systemd-logind[2633]: Linked /tmp/.X11-unix/X0 to
/run/user/1000/X11-display.
Bertrand Dekoninck
Reply to: