Bug#743371: linux-image-3.13-0.bpo.1-686-pae: Suspend and/or resume fails on Z670 Oaktrail tablet
Package: src:linux
Version: 3.13.5-1~bpo70+1
Severity: important
Tags: upstream
Dear Maintainer,
* What led up to the situation?
Pressing the power button on Viewpad Viewsonic 10pi tablet makes the device lock itself and cannot be resumed
* What exactly did you do (or not do) that was effective (or ineffective)?
Pressing the power button to suspend and pressing it again to resume
* What was the outcome of this action?
The tablet went black and had to be hard rebooted
* What outcome did you expect instead?
That the tablet would have woke up
I would be greatful for any input in helping me to analyze or debug this
problem. I am willing to report and debug it further once I know how to
proceed.
Additional information
This tablet has an Atom Z670 CPU (Moorestown) and has the Oaktrail tablet
platform with GMA600 graphics.
What works: Brightness adjustment works, light sensor works, orientation
sensor works, wifi works, front and rear cameras work, hardware
buttons work (including volume, brightness and orientation lock)
What doesn't work: any kind of suspend, screen rotation doesn't work
(screen rotation is a graphics driver problem, which
is not covered in this bug)
The suspend problem was analysed by installing kernel 3.14 RC 8 (everything
seems to be working the same in kernel 3.14 as in 3.13) and enabling
pm_trace: sync && echo 1 > /sys/power/pm_trace && pm-suspend
After a hard reset and booting after suspending the following rows were seen in dmesg:
[ 1.606788] Magic number: 10:560:347
[ 1.606864] pci0000:00: hash matches
[ 12.894103] i2c-designware-pci 0000:00:1f.0: I/O memory remapping failed
[ 12.894324] i2c-designware-pci: probe of 0000:00:1f.0 failed with error -22
Full dmesg output after suspend and hard boot posted at
http://paste.debian.net/91074/
pm-suspend.log.1 after suspend and hard reboot posted at
http://paste.debian.net/91073/
Upon previous boots the following have been observed. Not sure why it has
complained over all the I2C devices even though it seems to recognize them:
[ 5.307153] i2c-designware-pci 0000:00:1f.0: I/O memory remapping failed
[ 5.307424] i2c-designware-pci: probe of 0000:00:1f.0 failed with error -22
[ 5.320756] i2c-designware-pci 0000:07:12.0: failure adding adapter
[ 5.321092] i2c-designware-pci: probe of 0000:07:12.0 failed with error -16
[ 5.339897] i2c-designware-pci 0000:08:13.0: failure adding adapter
[ 5.348414] i2c-designware-pci: probe of 0000:08:13.0 failed with error -16
[ 5.365447] i2c-designware-pci 0000:09:14.0: failure adding adapter
[ 5.365836] i2c-designware-pci: probe of 0000:09:14.0 failed with error -16
# lspci
00:00.0 Host bridge: Intel Corporation Device 4110 (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Device 4102 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Device 0817 (rev 03)
01:01.0 Display controller: Intel Corporation Moorestown External Displays (rev 01)
03:10.0 System peripheral: Intel Corporation Moorestown SC DMA (rev 01)
05:11.0 Communication controller: Intel Corporation Moorestown SPI Ctrl 1 (rev 01)
07:12.0 Communication controller: Intel Corporation Moorestown I2C 0 (rev 01)
08:13.0 Communication controller: Intel Corporation Moorestown I2C 1 (rev 01)
09:14.0 Communication controller: Intel Corporation Moorestown I2C 2 (rev 01)
0b:15.0 Audio device: Intel Corporation Moorestown Audio Ctrl
0c:16.0 USB controller: Intel Corporation Moorestown USB Ctrl (rev 01)
0d:17.0 USB controller: Intel Corporation Moorestown OTG Ctrl (rev 01)
0e:18.0 SD Host controller: Intel Corporation Moorestown SD Host Ctrl 0 (rev 01)
0f:19.0 SD Host controller: Intel Corporation Moorestown SD Host Ctrl 1 (rev 01)
10:1a.0 SD Host controller: Intel Corporation Moorestown SPI Ctrl 2 (rev 01)
11:1b.0 SATA controller: Intel Corporation Device 0816 (rev 01)
# dmidecode
http://paste.debian.net/91089/
I am not sure if this is a different problem, but I also tried to load the
intel_oaktrail module:
root@viewpad:~# modprobe intel_oaktrail
ERROR: could not insert 'intel_oaktrail': No such device
Forcing the module makes network unavailable and I cannot turn network back on.
There is no physical killswitch for the wifi radio:
root@viewpad:~# modprobe intel_oaktrail force=1
Apr 2 01:18:37 viewpad kernel: [ 1017.383778] intel_oaktrail: no symbol version for module_layout
Apr 2 01:18:46 viewpad kernel: [ 1025.987575] intel_oaktrail: no symbol version for module_layout
Apr 2 01:19:34 viewpad kernel: [ 1074.830237] intel_oaktrail: Backlight controlled by ACPI video driver
Apr 2 01:19:34 viewpad dhclient: receive_packet failed on mlan0: Network is down
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Interface mlan0.IPv6 no longer relevant for mDNS.
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Leaving mDNS multicast group on interface mlan0.IPv6 with address 2001:470:28:ebf:b477:1ff4:96bc:10be.
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Leaving mDNS multicast group on interface mlan0.IPv4 with address 192.168.1.126.
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Interface mlan0.IPv4 no longer relevant for mDNS.
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Withdrawing address record for 2001:470:28:ebf:208:caff:fec2:e298 on mlan0.
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Withdrawing address record for 2001:470:28:ebf:b477:1ff4:96bc:10be on mlan0.
Apr 2 01:19:34 viewpad avahi-daemon[2465]: Withdrawing address record for 192.168.1.126 on mlan0.
Apr 2 01:19:34 viewpad wpa_supplicant[2571]: rfkill: WLAN soft blocked
Apr 2 01:19:34 viewpad bluetoothd[2523]: HCI dev 0 down
Apr 2 01:19:34 viewpad kernel: [ 1074.839653] cfg80211: Calling CRDA to update world regulatory domain
Apr 2 01:19:34 viewpad bluetoothd[2523]: Adapter /org/bluez/2523/hci0 has been disabled
Apr 2 01:19:34 viewpad kernel: [ 1074.883613] intel_oaktrail: Driver 0.4ac1 successfully loaded
Apr 2 01:19:34 viewpad kernel: [ 1074.896705] cfg80211: World regulatory domain updated:
Apr 2 01:19:34 viewpad kernel: [ 1074.896721] cfg80211: DFS Master region: unset
Apr 2 01:19:35 viewpad NetworkManager[2468]: <info> WiFi now disabled by radio killswitch
Apr 2 01:19:35 viewpad NetworkManager[2468]: <info> (mlan0): device state change: activated -> unavailable (reason 'none') [100 20 0]
Apr 2 01:19:35 viewpad NetworkManager[2468]: <info> (mlan0): deactivating device (reason 'none') [0]
Apr 2 01:19:36 viewpad NetworkManager[2468]: <info> (mlan0): canceled DHCP transaction, DHCP client pid 3136
Apr 2 01:19:36 viewpad NetworkManager[2468]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/platform/intel_oaktrail/rfkill/rfkill3) (driver intel_oaktrail)
Apr 2 01:19:36 viewpad NetworkManager[2468]: <info> found WWAN radio killswitch rfkill6 (at /sys/devices/platform/intel_oaktrail/rfkill/rfkill6) (driver intel_oaktrail)
Apr 2 01:19:36 viewpad NetworkManager[2468]: <info> WWAN now enabled by management service
Apr 2 01:19:36 viewpad NetworkManager[2468]: <info> WWAN now disabled by radio killswitch
-- Package-specific info:
** Version:
Linux version 3.13-0.bpo.1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.13.5-1~bpo70+1 (2014-03-15)
** Command line:
BOOT_IMAGE=/vmlinuz-3.13-0.bpo.1-686-pae root=UUID=befb5279-2e3e-4bc0-960c-551052a9545d ro quiet
** Not tainted
** Kernel log:
[ 3.789159] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.791980] btmrvl_sdio mmc2:0001:2: firmware: direct-loading firmware mrvl/sd8787_uapsta.bin
[ 3.793380] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.793389] [drm] No driver support for vblank timestamp query.
[ 3.797473] gma500 0000:00:02.0: HDMI initialised.
[ 3.898714] random: nonblocking pool is initialized
[ 3.906466] snd_hda_intel 0000:0b:15.0: irq 41 for MSI/MSI-X
[ 4.197610] fbcon: psbdrmfb (fb0) is primary device
[ 4.315799] Console: switching to colour frame buffer device 160x50
[ 4.331456] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 4.331466] gma500 0000:00:02.0: registered panic notifier
[ 4.332176] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 4.388339] input: HDA Intel MID Headphone as /devices/pci0000:0b/0000:0b:15.0/sound/card0/input7
[ 4.388856] input: HDA Intel MID Mic as /devices/pci0000:0b/0000:0b:15.0/sound/card0/input6
[ 4.389335] input: HDA Intel MID HDMI as /devices/pci0000:0b/0000:0b:15.0/sound/card0/input5
[ 4.574692] cfg80211: World regulatory domain updated:
[ 4.574705] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.574714] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.574722] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.574729] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.574737] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.574744] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.007947] mwifiex_sdio mmc2:0001:1: firmware: direct-loading firmware mrvl/sd8787_uapsta.bin
[ 5.008410] Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3
[ 5.008569] mwifiex_sdio mmc2:0001:1: WLAN FW already running! Skip FW dnld
[ 5.008594] mwifiex_sdio mmc2:0001:1: WLAN FW is active
[ 5.133745] ieee80211 phy0: ignoring F/W country code US
[ 5.135559] mwifiex_sdio mmc2:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
[ 10.658560] usb 1-2: New USB device found, idVendor=5986, idProduct=04ae
[ 10.658584] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[ 10.658602] usb 1-2: Product: PC-CZ01-371L-SS03-R00.00.02.D
[ 10.658617] usb 1-2: Manufacturer: Image Processor
[ 10.658632] usb 1-2: SerialNumber: PC-CZ01-371L-SS03-R00.00.02.D
[ 10.772227] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 10.905275] usb 2-1: New USB device found, idVendor=0424, idProduct=2517
[ 10.905299] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.906542] hub 2-1:1.0: USB hub found
[ 10.906870] hub 2-1:1.0: 7 ports detected
[ 10.995286] media: Linux media interface: v0.10
[ 11.002904] Linux video capture interface: v2.00
[ 11.014409] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0bda:5803)
[ 11.021918] input: USB 2.0 Camera as /devices/pci0000:0c/0000:0c:16.0/usb1/1-1/1-1:1.0/input/input8
[ 11.022254] uvcvideo: Found UVC 1.00 device PC-CZ01-371L-SS03-R00.00.02.D (5986:04ae)
[ 11.024104] input: PC-CZ01-371L-SS03-R00.00.02.D as /devices/pci0000:0c/0000:0c:16.0/usb1/1-2/1-2:1.0/input/input9
[ 11.024379] usbcore: registered new interface driver uvcvideo
[ 11.024387] USB Video Class driver (1.1.1)
[ 11.180351] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 11.273402] usb 2-1.2: New USB device found, idVendor=067b, idProduct=2303
[ 11.273416] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.273425] usb 2-1.2: Product: USB-Serial Controller D
[ 11.273434] usb 2-1.2: Manufacturer: Prolific Technology Inc.
[ 11.360438] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
[ 11.453916] usb 2-1.4: New USB device found, idVendor=222a, idProduct=0001
[ 11.453933] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.453943] usb 2-1.4: Product: ILITEK Multi-Touch
[ 11.453952] usb 2-1.4: Manufacturer: ILITEK
[ 11.544426] usb 2-1.6: new low-speed USB device number 5 using ehci-pci
[ 11.658295] usb 2-1.6: New USB device found, idVendor=0c45, idProduct=7000
[ 11.658316] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.658331] usb 2-1.6: Product: iPazzPort
[ 11.658344] usb 2-1.6: Manufacturer: RCMCU
[ 11.750476] usbcore: registered new interface driver usbserial
[ 11.750538] usbcore: registered new interface driver usbserial_generic
[ 11.750600] usbserial: USB Serial support registered for generic
[ 11.754933] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.761505] usbcore: registered new interface driver pl2303
[ 11.761565] usbserial: USB Serial support registered for pl2303
[ 11.761623] pl2303 2-1.2:1.0: pl2303 converter detected
[ 11.773791] usb 2-1.2: pl2303 converter now attached to ttyUSB0
[ 11.791093] usbcore: registered new interface driver usbhid
[ 11.791103] usbhid: USB HID core driver
[ 11.824376] Adding 2738172k swap on /dev/sda2. Priority:-1 extents:1 across:2738172k SS
[ 11.828909] input: ILITEK ILITEK Multi-Touch as /devices/pci0000:0d/0000:0d:17.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
[ 11.835673] hid-multitouch 0003:222A:0001.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ILITEK ILITEK Multi-Touch] on usb-0000:0d:17.0-1.4/input0
[ 11.861000] input: RCMCU iPazzPort as /devices/pci0000:0d/0000:0d:17.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input12
[ 11.864003] hid-generic 0003:0C45:7000.0002: input,hidraw1: USB HID v1.11 Keyboard [RCMCU iPazzPort] on usb-0000:0d:17.0-1.6/input0
[ 11.876119] input: RCMCU iPazzPort as /devices/pci0000:0d/0000:0d:17.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input13
[ 11.877245] hid-generic 0003:0C45:7000.0003: input,hidraw2: USB HID v1.11 Mouse [RCMCU iPazzPort] on usb-0000:0d:17.0-1.6/input1
[ 11.905315] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 12.042842] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 12.133484] loop: module loaded
[ 12.267715] usbcore: registered new interface driver rtl8192cu
[ 13.446752] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.392069] RPC: Registered named UNIX socket transport module.
[ 14.392080] RPC: Registered udp transport module.
[ 14.392085] RPC: Registered tcp transport module.
[ 14.392090] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.402086] FS-Cache: Loaded
[ 14.435073] FS-Cache: Netfs 'nfs' registered for caching
[ 14.457163] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.436163] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 17.739179] Bluetooth: RFCOMM TTY layer initialized
[ 17.739215] Bluetooth: RFCOMM socket layer initialized
[ 17.739237] Bluetooth: RFCOMM ver 1.11
[ 17.746522] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.746535] Bluetooth: BNEP filters: protocol multicast
[ 17.746569] Bluetooth: BNEP socket layer initialized
[ 18.388735] lp: driver loaded but no devices found
[ 18.409591] ppdev: user-space parallel port driver
[ 19.791697] type=1006 audit(1396421503.718:2): pid=3151 uid=0 old auid=4294967295 new auid=114 old ses=4294967295 new ses=1 res=1
** Model information
not available
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
uinput
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
rtl8192cu
rtl_usb
rtlwifi
rtl8192c_common
mac80211
loop
hid_generic
joydev
hid_multitouch
usbhid
pl2303
hid
usbserial
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
mwifiex_sdio
snd_timer
mwifiex
coretemp
btmrvl_sdio
btmrvl
cfg80211
bluetooth
rfkill
evdev
pcspkr
gma500_gfx
snd
drm_kms_helper
drm
soundcore
i2c_designware_pci
i2c_algo_bit
i2c_designware_core
i2c_core
battery
video
acpi_cpufreq
processor
ac
button
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_common
mmc_block
ahci
libahci
sdhci_pci
libata
sdhci
scsi_mod
mmc_core
ehci_pci
ehci_hcd
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:4110] (rev 04)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:4102] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at ff200000 (32-bit, non-prefetchable) [size=1M]
Region 1: I/O ports at 7ff8 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Region 3: Memory at cffc0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:0817] (rev 03)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:01.0 Display controller [0380]: Intel Corporation Moorestown External Displays [8086:080d] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ff010000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at 2100 [size=32]
Expansion ROM at <ignored> [disabled]
03:10.0 System peripheral [0880]: Intel Corporation Moorestown SC DMA [8086:0813] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at ff11f000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
05:11.0 Communication controller [0780]: Intel Corporation Moorestown SPI Ctrl 1 [8086:0801] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: Memory at ff129000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
07:12.0 Communication controller [0780]: Intel Corporation Moorestown I2C 0 [8086:0802] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ff12a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2200 [size=16]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: i2c-designware-pci
08:13.0 Communication controller [0780]: Intel Corporation Moorestown I2C 1 [8086:0803] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ff130000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2210 [size=16]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: i2c-designware-pci
09:14.0 Communication controller [0780]: Intel Corporation Moorestown I2C 2 [8086:0804] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ff131000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2220 [size=16]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: i2c-designware-pci
0b:15.0 Audio device [0403]: Intel Corporation Moorestown Audio Ctrl [8086:080a]
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at ffaf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
0c:16.0 USB controller [0c03]: Intel Corporation Moorestown USB Ctrl [8086:0806] (rev 01) (prog-if 20 [EHCI])
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
0d:17.0 USB controller [0c03]: Intel Corporation Moorestown OTG Ctrl [8086:0811] (rev 01) (prog-if 20 [EHCI])
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: Memory at ffa60000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
0e:18.0 SD Host controller [0805]: Intel Corporation Moorestown SD Host Ctrl 0 [8086:0807] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ffa50000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0f:19.0 SD Host controller [0805]: Intel Corporation Moorestown SD Host Ctrl 1 [8086:0808] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ffa58000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
10:1a.0 SD Host controller [0805]: Intel Corporation Moorestown SPI Ctrl 2 [8086:0812] (rev 01)
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ffa5c000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
11:1b.0 SATA controller [0106]: Intel Corporation Device [8086:0816] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Device [1b35:220b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 2000 [size=32]
Region 5: Memory at ff009000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 002 Device 005: ID 0c45:7000 Microdia
Bus 002 Device 004: ID 222a:0001
Bus 002 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 002 Device 002: ID 0424:2517 Standard Microsystems Corp. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 5986:04ae Acer, Inc
Bus 001 Device 002: ID 0bda:5803 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 7.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.13-0.bpo.1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to sv_FI.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-0.bpo.1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.13-0.bpo.1-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38+deb7u1
Versions of packages linux-image-3.13-0.bpo.1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-0.bpo.1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.41~bpo70+1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: