Bug#736130: linux-image-3.12-1-powerpc64 crashes during shutdown of PowerPC G5 Mac. But PowerPC g4 Mac (23-bit) works OK.
Package: src:linux
Version: 3.12.6-2
Severity: important
-- Package-specific info:
** Version:
Linux version 3.12-1-powerpc64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.12.6-2 (2013-12-29)
** Command line:
root=UUID=22825ec8-11c9-4041-8bb3-d74fabacf3f5 ro
** Not tainted
** Kernel log:
[ 5.429923] hid-generic 0003:0461:4D15.0006: input,hidraw5: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0001:05:0b.0-2.3/input0
[ 5.536358] PM: Starting manual resume from disk
[ 5.551346] PM: Hibernation image partition 8:4 present
[ 5.551348] PM: Looking for hibernation image.
[ 5.559934] PM: Image not found (code -22)
[ 5.559939] PM: Hibernation image not present or could not be loaded.
[ 5.605217] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 5.620377] EXT4-fs (sda3): write access will be enabled during recovery
[ 6.438475] EXT4-fs (sda3): recovery complete
[ 6.463378] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.603515] systemd-udevd[328]: starting version 204
[ 8.366144] cfg80211: Calling CRDA to update world regulatory domain
[ 8.668627] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 8.704610] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[ 8.744678] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 8.770468] b43 ssb0:0: firmware: failed to load b43/ucode5.fw (-2)
[ 8.786018] b43 ssb0:0: firmware: failed to load b43/ucode5.fw (-2)
[ 8.801573] b43 ssb0:0: firmware: failed to load b43-open/ucode5.fw (-2)
[ 8.816913] b43 ssb0:0: firmware: failed to load b43-open/ucode5.fw (-2)
[ 8.831975] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 9.418309] cfg80211: World regulatory domain updated:
[ 9.434184] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.450012] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.465849] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.481576] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.497178] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.512730] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.327388] Adding 5868160k swap on /dev/sda4. Priority:-1 extents:1 across:5868160k
[ 12.441652] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 12.799691] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 13.946910] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
[ 13.995345] i2c i2c-4: therm_pm72: attach_adapter method is deprecated
[ 14.005929] i2c i2c-4: Please use another way to instantiate your i2c_client
[ 14.016452] PowerMac i2c bus pmu 2 registered
[ 14.028733] i2c i2c-5: therm_pm72: attach_adapter method is deprecated
[ 14.039319] i2c i2c-5: Please use another way to instantiate your i2c_client
[ 14.049877] PowerMac i2c bus pmu 1 registered
[ 14.060367] i2c i2c-6: therm_pm72: attach_adapter method is deprecated
[ 14.070900] i2c i2c-6: Please use another way to instantiate your i2c_client
[ 14.081481] PowerMac i2c bus mac-io 0 registered
[ 14.092515] i2c i2c-7: therm_pm72: attach_adapter method is deprecated
[ 14.103201] i2c i2c-7: Please use another way to instantiate your i2c_client
[ 14.113822] PowerMac i2c bus u3 1 registered
[ 14.124225] i2c i2c-7: Failed to register i2c client MAC,fcu at 0x2f (-16)
[ 14.134693] i2c i2c-7: i2c-powermac: Failure to register /u3@0,f8000000/i2c@f8001000/fan@15e
[ 14.145113] i2c i2c-7: i2c-powermac: modalias failure on /u3@0,f8000000/i2c@f8001000/cereal@1c0
[ 14.155365] i2c i2c-8: therm_pm72: attach_adapter method is deprecated
[ 14.165586] i2c i2c-8: Please use another way to instantiate your i2c_client
[ 14.176228] PowerMac i2c bus u3 0 registered
[ 14.190309] FCU Initialized, RPM fan shift is 3
[ 14.191367] i2c i2c-8: Failed to register i2c client MAC,ds1775 at 0x4a (-16)
[ 14.201881] i2c i2c-8: i2c-powermac: Failure to register /u3@0,f8000000/i2c@f8001000/temp-monitor@94
[ 14.212545] i2c i2c-8: Failed to register i2c client MAC,max6690 at 0x4c (-16)
[ 14.223332] i2c i2c-8: i2c-powermac: Failure to register /u3@0,f8000000/i2c@f8001000/temp-monitor@98
[ 14.234119] i2c i2c-8: Failed to register i2c client MAC,ad7417 at 0x2c (-16)
[ 14.244524] i2c i2c-8: i2c-powermac: Failure to register /u3@0,f8000000/i2c@f8001000/supply-monitor@58
[ 14.256115] i2c i2c-8: Failed to register i2c client MAC,ad7417 at 0x2d (-16)
[ 14.266651] i2c i2c-8: i2c-powermac: Failure to register /u3@0,f8000000/i2c@f8001000/supply-monitor@5a
[ 14.325096] fuse init (API version 7.22)
[ 14.384786] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.414385] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 14.494997] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.710261] RPC: Registered named UNIX socket transport module.
[ 15.710269] RPC: Registered udp transport module.
[ 15.710272] RPC: Registered tcp transport module.
[ 15.710274] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.738763] FS-Cache: Loaded
[ 15.769665] FS-Cache: Netfs 'nfs' registered for caching
[ 15.850262] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.380908] sungem_phy: PHY ID: 2062e0, addr: 1
[ 16.381164] gem 0001:03:0f.0 eth0: Found BCM5421-K2 PHY
[ 16.381449] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.992732] gem 0001:03:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 19.992854] gem 0001:03:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 19.992894] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.904377] lp: driver loaded but no devices found
[ 21.952845] Bluetooth: Core ver 2.16
[ 21.952909] NET: Registered protocol family 31
[ 21.952912] Bluetooth: HCI device and connection manager initialized
[ 21.957311] Bluetooth: HCI socket layer initialized
[ 21.957322] Bluetooth: L2CAP socket layer initialized
[ 21.957342] Bluetooth: SCO socket layer initialized
[ 21.977317] Bluetooth: RFCOMM TTY layer initialized
[ 21.977351] Bluetooth: RFCOMM socket layer initialized
[ 21.977354] Bluetooth: RFCOMM ver 1.11
[ 22.087230] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.087237] Bluetooth: BNEP filters: protocol multicast
[ 22.087255] Bluetooth: BNEP socket layer initialized
[ 45.027178] systemd-logind[2877]: New seat seat0.
[ 45.029990] systemd-logind[2877]: New session c1 of user root.
[ 110.722467] usb 4-2: USB disconnect, device number 2
[ 110.722474] usb 4-2.1: USB disconnect, device number 3
[ 110.840881] usb 4-2.3: USB disconnect, device number 4
[ 1240.265749] systemd-logind[2877]: New session 1 of user root.
[ 8674.161822] systemd-logind[2877]: Removed session 1.
[ 8674.162754] systemd-logind[2877]: New session 2 of user root.
[15670.741859] systemd-logind[2877]: Removed session 2.
[15670.743072] systemd-logind[2877]: New session 3 of user rbthomas.
[179934.914358] systemd-logind[2877]: Removed session 3.
[179934.916033] systemd-logind[2877]: New session 4 of user rbthomas.
** Model information
revision : 3.0 (pvr 003c 0300)
revision : 3.0 (pvr 003c 0300)
platform : PowerMac
model : PowerMac7,3
machine : PowerMac7,3
motherboard : PowerMac7,3 MacRISC4 Power Macintosh
** Loaded modules:
bnep
rfcomm
parport_pc
bluetooth
lp
parport
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
i2c_powermac
snd_powermac
snd_pcm
snd_seq
snd_seq_device
snd_timer
snd
soundcore
snd_page_alloc
evdev
b43
bcma
mac80211
cfg80211
rfkill
rng_core
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sd_mod
crc_t10dif
crct10dif_common
ata_generic
ohci_pci
ehci_pci
ohci_hcd
sg
therm_pm72
ehci_hcd
firewire_ohci
ssb
mmc_core
firewire_core
pcmcia
usbcore
crc_itu_t
pcmcia_core
sr_mod
cdrom
sata_svw
sungem
sungem_phy
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
# This is an autoconfigured IPv6 interface
iface eth0 inet6 auto
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:11:24:38:10:48 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.148/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2001:4978:2d2:1:211:24ff:fe38:1048/64 scope global dynamic
valid_lft 86398sec preferred_lft 14398sec
inet6 fe80::211:24ff:fe38:1048/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 272431773 313742 0 0 0 0 0 0 272431773 313742 0 0 0 0 0 0
eth0: 17440082 119737 0 0 0 0 0 0 616395 5366 0 0 0 0 0 0
*** Protocol statistics:
Ip:
74664 total packets received
0 forwarded
0 incoming packets discarded
74662 incoming packets delivered
2053 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
23 active connections openings
13 passive connection openings
8 failed connection attempts
1 connection resets received
3 connections established
316706 segments received
315541 segments send out
4 segments retransmited
0 bad segments received.
9 resets sent
Udp:
20617 packets received
0 packets to unknown port received.
0 packet receive errors
1905 packets sent
UdpLite:
TcpExt:
8 TCP sockets finished time wait in fast timer
270 delayed acks sent
Quick ack mode was activated 2 times
805 packets directly queued to recvmsg prequeue.
39388 bytes directly in process context from backlog
1591774 bytes directly received in process context from prequeue
154142 packet headers predicted
883 packets header predicted and directly queued to user
35901 acknowledgments not containing data payload received
60720 predicted acknowledgments
4 times recovered from packet loss by selective acknowledgements
4 fast retransmits
TCPLossProbes: 9
TCPLossProbeRecovery: 7
2 DSACKs sent for old packets
1 DSACKs received
1 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackMerged: 2
TCPSackShiftFallback: 18
TCPRcvCoalesce: 22169
TCPOFOQueue: 58
TCPSpuriousRtxHostQueues: 1
IpExt:
InNoRoutes: 2
InMcastPkts: 1357
OutMcastPkts: 132
InBcastPkts: 71380
InOctets: 9977896
OutOctets: 184517
InMcastOctets: 558981
OutMcastOctets: 17232
InBcastOctets: 8861643
InNoECTPkts: 74664
** PCI devices:
0000:f0:0b.0 Host bridge [0600]: Apple Inc. U3H AGP Bridge [106b:0059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:f0:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV350 [Radeon 9550/9600/X1050 Series] [1002:4150] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV350 [Radeon 9550/9600/X1050 Series] [1002:4150]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 90020000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
0001:00:00.0 Host bridge [0600]: Apple Inc. U3 HT Bridge [106b:0057]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
0001:00:01.0 PCI bridge [0604]: Apple Inc. K2 HT-PCI Bridge [106b:0045] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:02.0 PCI bridge [0604]: Apple Inc. K2 HT-PCI Bridge [106b:0046] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: 80700000-807fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:03.0 PCI bridge [0604]: Apple Inc. K2 HT-PCI Bridge [106b:0047] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: 80100000-801fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:04.0 PCI bridge [0604]: Apple Inc. K2 HT-PCI Bridge [106b:0048] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 80200000-805fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:05.0 PCI bridge [0604]: Apple Inc. K2 HT-PCI Bridge [106b:0049] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: 80600000-806fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:01:07.0 Unassigned class [ff00]: Apple Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 60)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 64 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:01:08.0 USB controller [0c03]: Apple Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:01:09.0 USB controller [0c03]: Apple Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:02:0d.0 Unassigned class [ff00]: Apple Inc. K2 ATA/100 [106b:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at 80104000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: pata-pci-macio
0001:02:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. K2 FireWire [106b:0042] (prog-if 10 [OHCI])
Subsystem: Apple Inc. Device [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0001:03:0f.0 Ethernet controller [0200]: Apple Inc. K2 GMAC (Sun GEM) [106b:004c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at 80400000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at 80200000 [disabled] [size=1M]
Kernel driver in use: gem
0001:04:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Broadcom K2 SATA [1166:0240]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin ? routed to IRQ 17
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Region 3: I/O ports at <unassigned> [disabled]
Region 4: I/O ports at <unassigned> [disabled]
Region 5: Memory at 80600000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: sata_svw
0001:05:01.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Apple Inc. AirPort Extreme [106b:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin A routed to IRQ 57
Region 0: Memory at 80704000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
0001:05:0b.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80702000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0001:05:0b.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at 80701000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0001:05:0b.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at 80700000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
** USB devices:
Bus 001 Device 005: ID 05ac:0204 Apple, Inc.
Bus 001 Device 004: ID 0557:8021 ATEN International Co., Ltd
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc64)
Kernel: Linux 3.12-1-powerpc64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.12-1-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.12-1-powerpc64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.12-1-powerpc64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.12 <none>
pn mkvmlinuz <none>
Versions of packages linux-image-3.12-1-powerpc64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.12-1-powerpc64/postinst/depmod-error-initrd-3.12-1-powerpc64: false
linux-image-3.12-1-powerpc64/prerm/removing-running-kernel-3.12-1-powerpc64: true
Reply to: