Bug#735254: flash-kernel: QNAP TS-212 doesn't boot with 3.12-1-kirkwood and flash-kernel 3.12
Package: src:linux
Followup-For: Bug #735254
I can confirm this issue on a TS-219.
Adding "DTB-Append-From: 3.12" and "DTB-Id: kirkwood-ts219-6281.dtb" in the apropriate place in all.db solves the issue parially and maybe only for a TS-219 (with Soc: 88F6281)
reflashing with kernel 3.12 fails because machine name has changed in device-tree.
GRTNX,
RobJE
-- Package-specific info:
** Version:
Linux version 3.12-0.bpo.1-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.12.6-2~bpo70+1 (2014-01-07)
** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768
** Not tainted
** Kernel log:
[ 3.900913] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.909162] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.918222] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.923062] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.923080] sd 0:0:0:0: [sda] Write Protect is off
[ 3.927907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.928101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.937219] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.979606] sdb: sdb1 sdb2
[ 3.983167] sda: sda1 sda2
[ 3.988464] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.993485] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.376216] md: md0 stopped.
[ 4.389290] md: bind<sdb1>
[ 4.400689] md: bind<sda1>
[ 4.424002] md: raid1 personality registered for level 1
[ 4.430355] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.435839] md0: detected capacity change from 0 to 999692173312
[ 4.442193] RAID1 conf printout:
[ 4.442204] --- wd:2 rd:2
[ 4.442213] disk 0, wo:0, o:1, dev:sda1
[ 4.442221] disk 1, wo:0, o:1, dev:sdb1
[ 4.455950] md0: unknown partition table
[ 4.479595] device-mapper: uevent: version 1.0.3
[ 4.487015] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 4.591082] bio: create slab <bio-1> at 1
[ 4.769140] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem
[ 4.790586] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.614941] udevd[308]: starting version 175
[ 6.788375] input: gpio_keys.3 as /devices/gpio_keys.3/input/input0
[ 7.048864] orion_wdt: Initial timeout 21 sec
[ 7.145097] usbcore: registered new interface driver usbfs
[ 7.201410] usbcore: registered new interface driver hub
[ 7.238630] usbcore: registered new device driver usb
[ 7.296547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.368172] ehci-orion: EHCI orion driver
[ 7.488089] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 7.525959] libphy: orion_mdio_bus: probed
[ 7.531214] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 8.113648] orion-ehci f1050000.ehci: EHCI Host Controller
[ 8.640122] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 8.675746] orion-ehci f1050000.ehci: irq 24, io mem 0xf1050000
[ 8.714355] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 8.724536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.731476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.738764] usb usb1: Product: EHCI Host Controller
[ 8.743676] usb usb1: Manufacturer: Linux 3.12-0.bpo.1-kirkwood ehci_hcd
[ 8.750423] usb usb1: SerialNumber: f1050000.ehci
[ 8.765609] hub 1-0:1.0: USB hub found
[ 8.781263] hub 1-0:1.0: 1 port detected
[ 8.881220] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:8c:76:74
[ 9.113277] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 9.262757] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
[ 9.269532] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.294392] hub 1-1:1.0: USB hub found
[ 9.306943] hub 1-1:1.0: 4 ports detected
[ 10.155923] Adding 498008k swap on /dev/sda2. Priority:-1 extents:1 across:498008k
[ 10.201882] Adding 498008k swap on /dev/sdb2. Priority:-2 extents:1 across:498008k
[ 10.237460] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 10.575063] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.925312] loop: module loaded
[ 18.978766] EXT4-fs (dm-1): mounting ext3 file system using the ext4 subsystem
[ 19.033688] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.059890] EXT4-fs (dm-2): mounting ext3 file system using the ext4 subsystem
[ 19.117530] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 19.145071] EXT4-fs (dm-7): mounting ext3 file system using the ext4 subsystem
[ 19.175291] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 19.199526] EXT4-fs (dm-6): mounting ext3 file system using the ext4 subsystem
[ 19.276633] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[ 19.292174] EXT4-fs (dm-3): mounting ext3 file system using the ext4 subsystem
[ 19.333510] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.350331] EXT4-fs (dm-4): mounting ext3 file system using the ext4 subsystem
[ 19.373949] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 19.407672] EXT4-fs (dm-8): mounting ext3 file system using the ext4 subsystem
[ 19.453725] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 19.501954] EXT4-fs (dm-9): mounting ext3 file system using the ext4 subsystem
[ 19.541657] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
[ 19.564383] EXT4-fs (dm-5): mounting ext3 file system using the ext4 subsystem
[ 19.613604] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 19.647377] EXT4-fs (dm-11): mounting ext3 file system using the ext4 subsystem
[ 19.698798] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
[ 19.791622] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null)
[ 19.864089] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
[ 24.383804] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.462237] 8021q: 802.1Q VLAN Support v1.8
[ 25.543540] IPv6: ADDRCONF(NETDEV_UP): vlan2: link is not ready
[ 27.154866] RPC: Registered named UNIX socket transport module.
[ 27.160853] RPC: Registered udp transport module.
[ 27.165588] RPC: Registered tcp transport module.
[ 27.170320] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 27.264835] FS-Cache: Loaded
[ 27.333761] FS-Cache: Netfs 'nfs' registered for caching
[ 27.429392] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 27.471706] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 27.481701] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.488285] IPv6: ADDRCONF(NETDEV_CHANGE): vlan2: link becomes ready
[ 31.388259] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 31.421681] NFSD: starting 90-second grace period (net c054d8e0)
[ 49.063747] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.218190] Bridge firewalling registered
** Model information
Hardware : Marvell Kirkwood (Flattened Device Tree)
Revision : 0000
** Loaded modules:
bridge
xt_multiport
iptable_filter
ip_tables
x_tables
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
8021q
garp
stp
mrp
llc
loop
evdev
marvell
hmac
ehci_orion
ehci_hcd
sha1_generic
mvmdio
mv643xx_eth
of_mdio
libphy
usbcore
mv_cesa
usb_common
orion_wdt
gpio_keys
ext4
mbcache
jbd2
dm_mod
raid1
md_mod
sd_mod
crc_t10dif
crct10dif_common
sata_mv
libata
scsi_mod
** PCI devices:
** USB devices:
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 7.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable'), (400, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 3.12-0.bpo.1-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.12-0.bpo.1-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.12-0.bpo.1-kirkwood recommends:
ii firmware-linux-free 3.2
ii uboot-mkimage 2012.04.01-2
Versions of packages linux-image-3.12-0.bpo.1-kirkwood suggests:
pn debian-kernel-handbook <none>
pn fdutils <none>
pn linux-doc-3.12 <none>
Versions of packages linux-image-3.12-0.bpo.1-kirkwood is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.40~bpo70+1
ii firmware-linux-nonfree 0.40~bpo70+1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: