Bug#734403: linux-image-3.12-1-amd64: "shutdown -h now" makes computer restart
Package: src:linux
Version: 3.12.6-2
Severity: normal
hi there,
the last aptitude upgrade my kernel got updated to 3.12-1-amd64, since
then something very strange happens: when i do a "shutdown -h now", thge
computer shuts down as expected, and all lights and fans go off. but
after a few more seconds, the whole thing restarts itself, a bit of a
zombie moment. I originally expected this to be some bizarre hardware
thing, but then I found a report [0] linking this to the kernel
(different version in their case). I still had linux-image-3.11-2-amd64
installed, so I rebooted into that and retried (a couple of times to
make sure), and i'll be damned but that kernel does the shutdown fine!
I have no clue how all that ACPI or whatever works, bbut something there
isn't ideal. happy to try a few things if you point me in the right
direction
regards robert
[0] http://forums.fedoraforum.org/showthread.php?t=83325
-- Package-specific info:
** Version:
Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.12.6-2 (2013-12-29)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=a7b74474-6a33-468b-841f-7708fb39db9b ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 2.739649] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 2.739666] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 2.739680] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 2.739696] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.739715] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.739735] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.739756] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.740392] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 2.741047] [drm] Memory usable by graphics device = 2048M
[ 2.741052] i915 0000:00:02.0: setting latency timer to 64
[ 2.744200] alg: No test for crc32 (crc32-pclmul)
[ 2.764177] i915 0000:00:02.0: irq 59 for MSI/MSI-X
[ 2.764186] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.764187] [drm] Driver supports precise vblank timestamp query.
[ 2.764240] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.780393] media: Linux media interface: v0.10
[ 2.781771] Linux video capture interface: v2.00
[ 2.783802] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080f)
[ 2.824732] input: UVC Camera (046d:080f) as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input17
[ 2.824857] usbcore: registered new interface driver uvcvideo
[ 2.824859] USB Video Class driver (1.1.1)
[ 2.825110] ata7.00: configured for UDMA/133
[ 2.825113] ata7: EH complete
[ 2.825169] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.877886] md: bind<sdb1>
[ 2.878684] md: bind<sdc1>
[ 2.880110] md: raid1 personality registered for level 1
[ 2.880247] md/raid1:md0: active with 2 out of 2 mirrors
[ 2.880342] created bitmap (4 pages) for device md0
[ 2.880477] md0: bitmap initialized from disk: read 1 pages, set 0 of 7451 bits
[ 2.886097] md0: detected capacity change from 0 to 499972571136
[ 2.902531] md0: unknown partition table
[ 2.956412] bcache: register_bdev() registered backing device md0
[ 2.957874] bcache: bch_cached_dev_attach() Caching md0 as bcache0 on set 8866e7fe-4e4e-4f64-be47-8e52e6843a72
[ 3.077945] fbcon: inteldrmfb (fb0) is primary device
[ 3.249280] Console: switching to colour frame buffer device 210x65
[ 3.251550] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.251551] i915 0000:00:02.0: registered panic notifier
[ 3.304019] acpi device:61: registered as cooling_device13
[ 3.304039] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.304060] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18
[ 3.304164] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.304216] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 3.304220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.304223] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
[ 3.304226] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
[ 3.304228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.304229] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
[ 3.304231] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
[ 3.304233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.304234] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.304614] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[ 3.306317] iTCO_vendor_support: vendor-support=0
[ 3.306535] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.306549] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 3.306587] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.308681] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 3.308744] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 3.308805] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 3.309038] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 3.309072] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 3.309104] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 3.524418] ata7.00: configured for UDMA/133
[ 3.524421] ata7: EH complete
[ 3.712927] Adding 15668220k swap on /dev/sda2. Priority:-1 extents:1 across:15668220k SS
[ 3.720899] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.740682] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.885640] fuse init (API version 7.22)
[ 3.902523] nct6775: Found NCT6776D/F or compatible chip at 0x4e:0xa30
[ 3.930063] EXT4-fs (bcache0): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 4.061121] RPC: Registered named UNIX socket transport module.
[ 4.061122] RPC: Registered udp transport module.
[ 4.061123] RPC: Registered tcp transport module.
[ 4.061124] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.062623] FS-Cache: Loaded
[ 4.065862] FS-Cache: Netfs 'nfs' registered for caching
[ 4.069603] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.219158] vboxdrv: Found 8 processor cores.
[ 4.219315] vboxdrv: fAsync=0 offMin=0x22d offMax=0x1496
[ 4.219348] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 4.219349] vboxdrv: Successfully loaded version 4.3.2_Debian (interface 0x001a0005).
[ 4.245232] vboxpci: IOMMU not found (not registered)
[ 4.382837] Bluetooth: Core ver 2.16
[ 4.382845] NET: Registered protocol family 31
[ 4.382846] Bluetooth: HCI device and connection manager initialized
[ 4.382851] Bluetooth: HCI socket layer initialized
[ 4.382852] Bluetooth: L2CAP socket layer initialized
[ 4.382855] Bluetooth: SCO socket layer initialized
[ 4.386007] Bluetooth: RFCOMM TTY layer initialized
[ 4.386016] Bluetooth: RFCOMM socket layer initialized
[ 4.386017] Bluetooth: RFCOMM ver 1.11
[ 4.388612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.388615] Bluetooth: BNEP filters: protocol multicast
[ 4.388621] Bluetooth: BNEP socket layer initialized
[ 4.401902] lp: driver loaded but no devices found
[ 4.403324] ppdev: user-space parallel port driver
[ 4.825953] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.594524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.605182] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 7.605594] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: Supermicro
product_name: X10SAE
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.00
board_vendor: Supermicro
board_name: X10SAE
board_version: 0123456789
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
nct6775
hwmon_vid
jc42
fuse
snd_hda_codec_hdmi
iTCO_wdt
iTCO_vendor_support
raid1
md_mod
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
x86_pkg_temp_thermal
coretemp
kvm_intel
kvm
evdev
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
psmouse
pcspkr
snd_hda_codec_realtek
lpc_ich
i915
mfd_core
serio_raw
i2c_i801
drm_kms_helper
snd_hda_intel
snd_hda_codec
drm
snd_hwdep
snd_pcm
mei_me
snd_page_alloc
snd_timer
mei
video
processor
button
snd
soundcore
ext4
crc16
mbcache
jbd2
bcache
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_common
hid_generic
usbhid
hid
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
libata
scsi_mod
e1000e
igb
i2c_algo_bit
i2c_core
dca
ehci_pci
ptp
ehci_hcd
pps_core
xhci_hcd
usbcore
thermal
usb_common
fan
thermal_sys
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:25:90:86:b3:bd brd ff:ff:ff:ff:ff:ff
inet 192.168.1.80/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::225:90ff:fe86:b3bd/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:25:90:86:b3:bc brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 1652956 1170 0 0 0 0 0 4 79128 812 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 13807 40 0 0 0 0 0 0 13807 40 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1171 total packets received
0 forwarded
0 incoming packets discarded
1171 incoming packets delivered
778 requests sent out
33 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
9 active connections openings
2 passive connection openings
4 failed connection attempts
0 connection resets received
2 connections established
1176 segments received
789 segments send out
0 segments retransmited
0 bad segments received.
4 resets sent
Udp:
26 packets received
0 packets to unknown port received.
0 packet receive errors
26 packets sent
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
5 delayed acks sent
Quick ack mode was activated 14 times
1 packets directly queued to recvmsg prequeue.
1187 bytes directly received in process context from prequeue
1067 packet headers predicted
1 packets header predicted and directly queued to user
27 acknowledgments not containing data payload received
4 predicted acknowledgments
14 DSACKs sent for old packets
TCPRcvCoalesce: 4
TCPOFOQueue: 1
IpExt:
InMcastPkts: 21
OutMcastPkts: 21
InBcastPkts: 2
InOctets: 1639548
OutOctets: 62158
InMcastOctets: 3926
OutMcastOctets: 3942
InBcastOctets: 648
InNoECTPkts: 1186
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3 Processor Integrated Graphics Controller [8086:041a] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 60
Region 0: Memory at f0834000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f0820000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 57
Region 0: Memory at f0840000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at f083e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:153a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 54
Region 0: Memory at f0800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f083d000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f083c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 58
Region 0: Memory at f0830000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: be200000-be3fffff
Prefetchable memory behind bridge: 00000000be400000-00000000be5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f0700000-f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Memory behind bridge: f0600000-f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f0500000-f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f0400000-f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f083b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation C226 Series Chipset Family Server Advanced SKU LPC Controller [8086:8c56] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 55
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f083a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0839000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 0: Memory at f0838000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0700000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at f0780000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
03:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: f0600000-f06fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0604000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f0600000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
06:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 56
Region 0: I/O ports at d050 [size=8]
Region 1: I/O ports at d040 [size=4]
Region 2: I/O ports at d030 [size=8]
Region 3: I/O ports at d020 [size=4]
Region 4: I/O ports at d000 [size=32]
Region 5: Memory at f0400000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 006 Device 002: ID 8087:8000 Intel Corp.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 8087:8008 Intel Corp.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 046d:080f Logitech, Inc. Webcam C120
Bus 001 Device 003: ID 04b4:0101 Cypress Semiconductor Corp. Keyboard/Hub
Bus 001 Device 002: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.12-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.ISO-8859-15, LC_CTYPE=en_GB.ISO-8859-15 (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.12-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.12-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.12-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb8u1
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.12 <none>
Versions of packages linux-image-3.12-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.12-1-amd64/postinst/depmod-error-initrd-3.12-1-amd64: false
linux-image-3.12-1-amd64/prerm/removing-running-kernel-3.12-1-amd64: true
Reply to: