Bug#734003: linux-image-3.13-rc6-amd64: Display manager fails to start, Intel graphics driver not loaded/used, brightness conrtols reversed
Package: src:linux
Version: 3.13~rc6-1~exp1
Severity: important
Dear Maintainer,
This package (version 3.13~rc6-1~exp1) is exhibiting some symptoms that lead me
to believe it's buggy, namely:
1: My display manager (GDM) fails to start when the system finishes booting.
2: The Intel graphics driver does not appear to be loaded/used (possibly the
reason for #1). Instead, the driver "Gallium 0.4 on llvmpipe (LLVM 3.3, 128
bits)" is used.
3: For some reason, the brightness controls end up reversed (trying to lower
the brightness raises it, and vice-versa), causing my display to be turned off
rather than turned up to full brightness when the system finishes booting
(possibly also related to #2).
If you could please look into these matters, I would be ever so grateful. For
the time being, I shall continue to run the 3.12 kernel, which does not
experience these issues.
-- Package-specific info:
** Version:
Linux version 3.13-rc6-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.13~rc6-1~exp1 (2013-12-30)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.13-rc6-amd64 root=UUID=376d5c13-85a6-476a-aa9e-1be9dc19d808 ro quiet splash
** Tainted: I (2048)
* Working around severe firmware bug.
** Kernel log:
[ 10.182746] systemd[1]: Starting udev Control Socket.
[ 10.182842] systemd[1]: Listening on udev Control Socket.
[ 10.182930] systemd[1]: Starting udev Coldplug all Devices...
[ 10.183809] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 10.184038] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.184637] systemd[1]: Started Set Up Additional Binary Formats.
[ 10.184655] systemd[1]: Starting Encrypted Volumes.
[ 10.184722] systemd[1]: Reached target Encrypted Volumes.
[ 10.225326] systemd[1]: Starting Apply Kernel Variables...
[ 10.226160] systemd[1]: Expecting device dev-disk-by\x2duuid-360e320b\x2d691a\x2d4e31\x2dbcfb\x2d47b1059d7864.device...
[ 10.226255] systemd[1]: Starting File System Check on Root Device...
[ 10.227037] systemd[1]: Expecting device dev-disk-by\x2duuid-5405f114\x2de615\x2d4140\x2d8331\x2d6428d0b806d2.device...
[ 10.227118] systemd[1]: Expecting device dev-disk-by\x2duuid-62eef65d\x2d32c0\x2d4c66\x2d81eb\x2dbcc97262b00a.device...
[ 10.574194] fuse init (API version 7.22)
[ 11.362490] loop: module loaded
[ 11.475392] systemd-udevd[259]: starting version 204
[ 13.684148] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.206514] cfg80211: Calling CRDA to update world regulatory domain
[ 14.221595] ACPI: AC Adapter [ACAD] (off-line)
[ 14.231365] ACPI: Battery Slot [BAT1] (battery present)
[ 14.403692] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
[ 14.403703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.403710] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 14.403716] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.GPIO 2 (20131115/utaddress-251)
[ 14.403722] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.403725] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.GPIO 1 (20131115/utaddress-251)
[ 14.403731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.403733] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.502991] Monitor-Mwait will be used to enter C-1 state
[ 14.503003] Monitor-Mwait will be used to enter C-2 state
[ 14.503008] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.503017] ACPI: acpi_idle registered with cpuidle
[ 14.503254] Switched to clocksource hpet
[ 14.516545] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 14.641617] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 14.668314] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 14.668319] Copyright(c) 2003-2013 Intel Corporation
[ 14.668520] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 14.668706] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[ 14.746313] acerhdf: Acer Aspire One Fan driver, v.0.5.26
[ 14.944354] systemd-udevd[317]: renamed network interface eth0 to eth1
[ 15.101133] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 15.105763] acer_wmi: Function bitmap for Communication Device: 0x10
[ 15.105771] acer_wmi: Brightness must be controlled by acpi video driver
[ 15.106072] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[ 15.109883] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-1000-5.ucode
[ 15.110112] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[ 15.292414] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 15.292421] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 15.292425] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 15.292429] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 15.292533] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 15.318056] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 568746
[ 15.364285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 15.511603] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.233624] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 16.276930] media: Linux media interface: v0.10
[ 16.305732] Linux video capture interface: v2.00
[ 16.369719] uvcvideo: Found UVC 1.00 device CNF9011 (04f2:b175)
[ 16.385819] input: CNF9011 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input16
[ 16.385924] usbcore: registered new interface driver uvcvideo
[ 16.385927] USB Video Class driver (1.1.1)
[ 16.399221] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input17
[ 16.467362] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 16.467497] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 16.467595] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 16.492963] iTCO_vendor_support: vendor-support=0
[ 16.494125] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 16.494173] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 16.494335] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.505613] cfg80211: World regulatory domain updated:
[ 16.505620] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.505624] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.505627] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.505631] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.505634] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.505637] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.245072] Adding 1048572k swap on /dev/sda3. Priority:-1 extents:1 across:1048572k
[ 18.591310] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.773853] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 22.409407] lp: driver loaded but no devices found
[ 23.033226] ppdev: user-space parallel port driver
[ 33.629777] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 33.645953] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.657405] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 33.664676] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 33.700534] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 33.710637] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 33.749236] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.850286] wlan0: authenticate with c8:cb:b8:f6:cc:12
[ 34.863674] wlan0: send auth to c8:cb:b8:f6:cc:12 (try 1/3)
[ 34.865735] wlan0: authenticated
[ 34.865947] wlan0: waiting for beacon from c8:cb:b8:f6:cc:12
[ 34.960050] wlan0: associate with c8:cb:b8:f6:cc:12 (try 1/3)
[ 34.964068] wlan0: RX AssocResp from c8:cb:b8:f6:cc:12 (capab=0x421 status=0 aid=2)
[ 34.968929] wlan0: associated
[ 34.968973] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 39.153375] type=1006 audit(1388708140.593:2): pid=1475 uid=0 old auid=4294967295 new auid=108 old ses=4294967295 new ses=1 res=1
[ 136.312117] [drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on
[ 314.297883] perf samples too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: Acer
product_name: Aspire 1810TZ
product_version: v1.3314
chassis_vendor: Chassis Manufacturer
chassis_version: Chassis Version
bios_vendor: INSYDE
bios_version: v1.3314
board_vendor: Acer
board_name: JM11-MS
board_version: Base Board Version
** Loaded modules:
cpufreq_conservative
cpufreq_stats
parport_pc
cpufreq_userspace
ppdev
cpufreq_powersave
binfmt_misc
lp
parport
joydev
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_hdmi
snd_hda_codec_realtek
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
arc4
snd_mixer_oss
snd_pcm
iwldvm
mac80211
snd_page_alloc
acer_wmi
sparse_keymap
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
acerhdf
acpi_cpufreq
iwlwifi
i2c_i801
coretemp
snd_seq
pcspkr
processor
psmouse
serio_raw
lpc_ich
mfd_core
snd_seq_device
snd_timer
snd
battery
ac
cfg80211
soundcore
rfkill
evdev
loop
fuse
autofs4
ext4
crc16
mbcache
jbd2
btrfs
xor
raid6_pq
crc32c
libcrc32c
sg
sd_mod
crc_t10dif
crct10dif_common
ahci
libahci
libata
scsi_mod
i915
wmi
video
i2c_algo_bit
drm_kms_helper
button
atl1c
uhci_hcd
ehci_pci
ehci_hcd
drm
i2c_core
thermal_sys
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 30d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 30a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d4504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d4500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d3500000-d44fffff
Prefetchable memory behind bridge: 00000000d0400000-00000000d13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d2500000-d34fffff
Prefetchable memory behind bridge: 00000000d1400000-00000000d23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 3040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d4504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 30c8 [size=8]
Region 1: I/O ports at 30dc [size=4]
Region 2: I/O ports at 30c0 [size=8]
Region 3: I/O ports at 30d8 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at d4504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4505000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d3500000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] [8086:0083]
Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1305]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d2500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 002 Device 002: ID 04f2:b175 Chicony Electronics Co., Ltd 4-Port Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers experimental
APT policy: (650, 'experimental'), (650, 'unstable'), (600, 'testing'), (500, 'saucy-updates'), (500, 'saucy-security'), (500, 'saucy')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.13-rc6-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-rc6-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-rc6-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.13-rc6-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb7u3
ii grub-pc 2.02~beta2-1
pn linux-doc-3.13 <none>
Versions of packages linux-image-3.13-rc6-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.40
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-rc6-amd64/postinst/depmod-error-initrd-3.13-rc6-amd64: false
linux-image-3.13-rc6-amd64/prerm/removing-running-kernel-3.13-rc6-amd64: true
Reply to: