Package: src:linux,upgrade-reports Version: 3.16.7-ckt2-1 Severity: important Dear maintainers, I've just upgraded my Genesi EfikaMX nettop from wheezy to jessie and the only package which wasn't upgraded was linux-image-3.2.0-4-mx5, so I had to install linux-image-armmp manually... I'm not really sure how to solve this sensibly, suggesting that linux-image-armmp should provide linux-image-3.2.0-4-mx5 seems strange. Besides that the upgrade when flawlessly, but the system only has 450 packages installed anyway. But still, very neat! "Just this"...: root@efikamx:~# apt-get install linux-image-armmp Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: linux-image-3.16.0-4-armmp Suggested packages: linux-doc-3.16 debian-kernel-handbook fdutils Recommended packages: irqbalance The following NEW packages will be installed: linux-image-3.16.0-4-armmp linux-image-armmp 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 24.6 MB of archives. After this operation, 104 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://ftp.de.debian.org/debian/ jessie/main linux-image-3.16.0-4-armmp armhf 3.16.7-ckt2-1 [24.6 MB Get:2 http://ftp.de.debian.org/debian/ jessie/main linux-image-armmp armhf 3.16+63 [5368 B] Fetched 24.6 MB in 7s (3394 kB/s) Preconfiguring packages ... Selecting previously unselected package linux-image-3.16.0-4-armmp. (Reading database ... 43566 files and directories currently installed.) Preparing to unpack .../linux-image-3.16.0-4-armmp_3.16.7-ckt2-1_armhf.deb ... Unpacking linux-image-3.16.0-4-armmp (3.16.7-ckt2-1) ... Selecting previously unselected package linux-image-armmp. Preparing to unpack .../linux-image-armmp_3.16+63_armhf.deb ... Unpacking linux-image-armmp (3.16+63) ... Setting up linux-image-3.16.0-4-armmp (3.16.7-ckt2-1) ... /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-3.16.0-4-armmp flash-kernel: deferring update (trigger activated) /etc/kernel/postinst.d/zz-flash-kernel: flash-kernel: deferring update (trigger activated) Setting up linux-image-armmp (3.16+63) ... Processing triggers for flash-kernel (3.28) ... flash-kernel: installing version 3.16.0-4-armmp Generating kernel u-boot image... done. Taking backup of uImage. Installing new uImage. Generating initramfs u-boot image... done. Taking backup of uInitrd. Installing new uInitrd. Generating boot script u-boot image... done. Taking backup of boot.scr. Installing new boot.scr. root@efikamx:~# And now let's see how it reboots :-) ... It didn't come back, will need to attach a serial console and see if I see anything useful there... cheers, Holger -- Package-specific info: ** Version: Linux version 3.2.0-4-mx5 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.63-2+deb7u2 ** Command line: console=ttymxc0,115200 console=tty1 rootwait rw ** Not tainted ** Kernel log: [ 1.634403] usb usb2: Product: Freescale On-Chip EHCI Host Controller [ 1.640871] usb usb2: Manufacturer: Linux 3.2.0-4-mx5 ehci_hcd [ 1.646730] usb usb2: SerialNumber: mxc-ehci.1 [ 1.651779] hub 2-0:1.0: USB hub found [ 1.655586] hub 2-0:1.0: 1 port detected [ 1.660144] mousedev: PS/2 mouse device common for all mice [ 1.666960] mc13xxx-rtc mc13892-rtc: rtc core: registered mc13892-rtc as rtc0 [ 1.674393] Registered led device: efikamx:green [ 1.674512] Registered led device: efikamx:red [ 1.674621] Registered led device: efikamx:blue [ 1.675527] usbcore: registered new interface driver usbhid [ 1.681119] usbhid: USB HID core driver [ 1.685750] TCP cubic registered [ 1.689003] NET: Registered protocol family 17 [ 1.693491] Registering the dns_resolver key type [ 1.698283] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 1.707206] registered taskstats version 1 [ 1.711726] regulator_init_complete: VCAM: disabling [ 1.716931] regulator_init_complete: VAUDIO: disabling [ 1.722306] regulator_init_complete: VVIDEO: disabling [ 1.727723] regulator_init_complete: VSD: disabling [ 1.733070] mc13xxx-rtc mc13892-rtc: setting system clock to 2014-12-18 15:30:20 UTC (1418916620) [ 1.742030] Initializing network drop monitor service [ 1.747919] Freeing init memory: 128K [ 1.784810] usb 1-1: new high-speed USB device number 2 using mxc-ehci [ 1.835537] udevd[46]: starting version 175 [ 1.959704] usb 1-1: New USB device found, idVendor=0b95, idProduct=772a [ 1.966519] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.973672] usb 1-1: Product: AX88x72A [ 1.977464] usb 1-1: Manufacturer: ASIX Elec. Corp. [ 1.982355] usb 1-1: SerialNumber: 123456 [ 2.127645] imx-sdma imx35-sdma: firmware: agent aborted loading sdma-imx51.bin (not found?) [ 2.191592] sdhci: Secure Digital Host Controller Interface driver [ 2.197887] sdhci: Copyright(c) Pierre Ossman [ 2.212784] SCSI subsystem initialized [ 2.216711] usb 2-1: new high-speed USB device number 2 using mxc-ehci [ 2.265355] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.309792] Registered led device: mmc0:: [ 2.315614] mmc0: SDHCI controller on sdhci-esdhc-imx51.0 [sdhci-esdhc-imx51.0] using ADMA [ 2.430258] libata version 3.00 loaded. [ 2.439662] scsi0 : pata_imx [ 2.443016] ata1: PATA max PIO0 cmd 0x83fe00a0 ctl 0x83fe00d8 irq 70 [ 2.450216] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101 [ 2.456984] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.464137] usb 2-1: Product: USB 2.0 Hub [MTT] [ 2.506866] hub 2-1:1.0: USB hub found [ 2.512379] hub 2-1:1.0: 4 ports detected [ 2.659395] mmc0: new high speed SDHC card at address e624 [ 2.667913] ata1.00: ATA-8: SanDisk pSSD-P2 8GB, SSD 5.20, max UDMA/133 [ 2.674568] ata1.00: 15649200 sectors, multi 0: LBA48 [ 2.679794] ata1.00: configured for PIO [ 2.684197] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-P2 SSD PQ: 0 ANSI: 5 [ 2.714826] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 2.728527] mmcblk0: p1 p2 p3 < p5 > [ 2.735625] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 2.747542] sd 0:0:0:0: [sda] Write Protect is off [ 2.752371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.752504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.767134] sda: sda1 sda2 [ 2.772096] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.797540] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.844937] usb 2-1.1: new high-speed USB device number 3 using mxc-ehci [ 2.986887] usb 2-1.1: New USB device found, idVendor=13d3, idProduct=3273 [ 2.993858] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.001224] usb 2-1.1: Product: 802.11 n WLAN [ 3.005658] usb 2-1.1: Manufacturer: Ralink [ 3.009852] usb 2-1.1: SerialNumber: 1.0 [ 3.484490] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.690364] udevd[266]: starting version 175 [ 5.092185] m25p80 spi0.1: sst25vf032b (4096 Kbytes) [ 5.163065] Creating 2 MTD partitions on "spi_flash": [ 5.179067] 0x000000000000-0x000000040000 : "u-boot" [ 5.220392] 0x000000040000-0x000000050000 : "config" [ 5.322499] cfg80211: Calling CRDA to update world regulatory domain [ 5.438127] asix 1-1:1.0: eth0: register 'asix' at usb-mxc-ehci.0-1, ASIX AX88772 USB 2.0 Ethernet, 70:71:bc:4e:f7:57 [ 5.521982] usbcore: registered new interface driver asix [ 5.665114] usb 2-1.1: reset high-speed USB device number 3 using mxc-ehci [ 5.944529] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.945999] Registered led device: rt2800usb-phy0::radio [ 5.946115] Registered led device: rt2800usb-phy0::assoc [ 5.946237] Registered led device: rt2800usb-phy0::quality [ 5.946333] usbcore: registered new interface driver rt2800usb [ 7.135011] Adding 379900k swap on /dev/mmcblk0p5. Priority:-1 extents:1 across:379900k SS [ 7.476988] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 7.907132] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 8.202491] loop: module loaded [ 13.174181] NET: Registered protocol family 10 [ 14.698079] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.725194] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.745157] asix 1-1:1.0: eth0: link down [ 14.823104] RPC: Registered named UNIX socket transport module. [ 14.829141] RPC: Registered udp transport module. [ 14.833858] RPC: Registered tcp transport module. [ 14.838589] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.881061] FS-Cache: Loaded [ 14.956692] FS-Cache: Netfs 'nfs' registered for caching [ 15.003245] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 16.646911] asix 1-1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 24.924727] eth0: no IPv6 routers present [ 4094.370238] systemd-udevd[4225]: starting version 215 ** Model information Processor : ARMv7 Processor rev 5 (v7l) Hardware : Genesi EfikaMX nettop Revision : 0013 ** Loaded modules: nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ipv6 ext2 loop arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 rfkill asix usbnet m25p80 mii mtd ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif mmc_block pata_imx libata sdhci_esdhc_imx sdhci_pltfm scsi_mod sdhci mmc_core ** PCI devices: not available ** USB devices: Bus 002 Device 003: ID 13d3:3273 IMC Networks 802.11 n/g/b Wireless LAN USB Mini-Card Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (500, 'testing') Architecture: armhf (armv7l) Kernel: Linux 3.2.0-4-mx5 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Init: unable to detect Versions of packages linux-image-3.2.0-4-mx5 depends on: ii debconf [debconf-2.0] 1.5.54 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-3.2.0-4-mx5 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.2.0-4-mx5 suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-mx5 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-mx5/postinst/ignoring-ramdisk: linux-image-3.2.0-4-mx5/postinst/depmod-error-initrd-3.2.0-4-mx5: false linux-image-3.2.0-4-mx5/postinst/missing-firmware-3.2.0-4-mx5: linux-image-3.2.0-4-mx5/prerm/removing-running-kernel-3.2.0-4-mx5: true
Attachment:
signature.asc
Description: This is a digitally signed message part.