Bug#772716: linux-image-3.16.0-4-amd64: no support for NVidia GK208 (NV108)
control: reassign -1 linux,bbswitch
In fact, the problem does not come from the kernel, but
from the presence of the bbswitch module at boot time.
Initially, bbswitch.ko was present for the 3.16 kernel
but not for the 3.17. So I sent my initial bug report
stating that my graphic card was not recognized by
3.16 whereas it was by 3.17.
However, after I rebooted (after having installed/compiled
bbswitch.ko for 3.17), I was back at my initial state :
nouveau module not loaded, same reported errors when
manually loaded and "xrandr --listproviders" only listing
my Intel card.
I've done several reboots, both with 3.16 and 3.17 kernel.
The result is always the same:
* if bbswitch.ko is installed (in /lib/modules/...), the
nouveau module is not loaded after the boot, it cannot be
manually loaded and "xrandr --listproviders" only listing
my Intel card.
* if bbswitch.ko is not installed in /lib/modules/..., after
the boot, the nouveau module is loaded and
"xrandr --listproviders" lists both the Intel and the NVidia
cards. In this case, I can (manually) load the bbswitch.ko
module (that I moved to my $HOME). And it seems to work
fine !
I tried to quickly load the nouveau module (adding it in
/etc/initramfs-tools/modules and regenerating the initramfs
with "update-initramfs -u") but it did not change anything
with respect to the previous results.
So, as a workaround, I put bbswitch.ko in my home and will
load it manually. But there is a bug somewhere.
Note that, when nouveau is loaded, PRIME works:
vdanjean@eyak:~$ glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile
vdanjean@eyak:~$ xrandr --setprovideroffloadsink nouveau Intel
vdanjean@eyak:~$ DRI_PRIME=1 glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Gallium 0.4 on NV108
vdanjean@eyak:~$
optirun did not, but it seems another bug:
vdanjean@eyak:~$ optirun -vvv glxspheres
[ 929.733038] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 929.733217] [INFO]Configured driver: nouveau
[ 929.733295] [DEBUG]optirun version 3.2.1 starting...
[ 929.733303] [DEBUG]Active configuration:
[ 929.733308] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 929.733312] [DEBUG] X display: :8
[ 929.733317] [DEBUG] LD_LIBRARY_PATH:
[ 929.733321] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 929.733326] [DEBUG] Accel/display bridge: auto
[ 929.733330] [DEBUG] VGL Compression: proxy
[ 929.733335] [DEBUG] VGLrun extra options:
[ 929.733340] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
[ 929.733374] [DEBUG]Using auto-detected bridge virtualgl
[ 929.738983] [INFO]Response: No - error: [XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 929.738990] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 929.738992] [DEBUG]Socket closed.
[ 929.738998] [ERROR]Aborting because fallback start is disabled.
[ 929.738999] [DEBUG]Killing all remaining processes.
vdanjean@eyak:~$
Regards,
Vincent
On 10/12/2014 13:46, Vincent Danjean wrote:
> Package: src:linux
> Version: 3.16.7-ckt2-1
> Severity: normal
>
> Hi,
>
> The current kernel in testing/unstable does not recognize the
> NVidia GK208 (NV108) graphics card. When trying to (manually) load
> the nouveau kernel module, one gets in kernel messages :
> Dec 10 13:15:05 eyak kernel: [ 142.789939] MXM: GUID detected in BIOS
> Dec 10 13:15:05 eyak kernel: [ 142.789976] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
> Dec 10 13:15:05 eyak kernel: [ 142.790088] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
> Dec 10 13:15:05 eyak kernel: [ 142.790360] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
> Dec 10 13:15:05 eyak kernel: [ 142.790686] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
> Dec 10 13:15:05 eyak kernel: [ 142.790688] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
> Dec 10 13:15:05 eyak kernel: [ 142.790807] nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0xffffffff
> Dec 10 13:15:05 eyak kernel: [ 142.791395] nouveau E[ DRM] failed to create 0x80000080, -22
> Dec 10 13:15:05 eyak kernel: [ 142.792027] nouveau: probe of 0000:01:00.0 failed with error -22
>
> (propriatory) NVidia modules are not installed (so not loaded)
> "xrandr --listproviders" only reports the Intel card (the laptop
> has two cards with "optimus", this is an HP ZBook 15).
>
>
> Booting with the kernel in experimental (3.17.4-1~exp1) correctly
> loads the nouveau kernel module and "xrandr --listproviders" correctly
> reports the two cards.
>
> I let you decide if the support for this video card in the nouveau
> driver can be backported for the jessie kernel of if using a
> backported kernel wil be required.
> Note: on this laptop, if one wants to use DVI or HDMI output, the
> use of the NVidia card is required (the Intel one is not wired to
> these outputs)
>
> Regards,
> Vincent
>
>
> -- Package-specific info:
> ** Kernel log: boot messages should be attached
>
> ** Model information
> sys_vendor: Hewlett-Packard
> product_name: HP ZBook 15
> product_version: A3008CD10003
> chassis_vendor: Hewlett-Packard
> chassis_version:
> bios_vendor: Hewlett-Packard
> bios_version: L70 Ver. 01.21
> board_vendor: Hewlett-Packard
> board_name: 1909
> board_version: KBC Version 94.53
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
>
> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00005000-00005fff
> Memory behind bridge: cb000000-cc0fffff
> Prefetchable memory behind bridge: 0000000050000000-0000000061ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company Device [103c:1909]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 33
> Region 0: Memory at cc400000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at 6000 [size=64]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: <access denied>
> Kernel driver in use: i915
>
> 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 29
> Region 0: Memory at cca20000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: xhci_hcd
>
> 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at cca35000 (64-bit, non-prefetchable) [size=16]
> Capabilities: <access denied>
> Kernel driver in use: mei_me
>
> 00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
> Subsystem: Hewlett-Packard Company Device [103c:1909]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin D routed to IRQ 19
> Region 0: I/O ports at 60b0 [size=8]
> Region 1: Memory at cca3c000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: serial
>
> 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 27
> Region 0: Memory at cca00000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at cca3b000 (32-bit, non-prefetchable) [size=4K]
> Region 2: I/O ports at 6080 [disabled] [size=32]
> Capabilities: <access denied>
> Kernel driver in use: e1000e
>
> 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at cca3a000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci-pci
>
> 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 32
> Region 0: Memory at cca30000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: snd_hda_intel
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=3a, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: b4000000-ca0fffff
> Prefetchable memory behind bridge: 0000000070000000-0000000091ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d4) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=3b, subordinate=5b, sec-latency=0
> I/O behind bridge: 00003000-00004fff
> Memory behind bridge: b0000000-b3ffffff
> Prefetchable memory behind bridge: 000000004f300000-000000004f4fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=5c, subordinate=5c, sec-latency=0
> Memory behind bridge: cc900000-cc9fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=5d, subordinate=5d, sec-latency=0
> I/O behind bridge: 00007000-00007fff
> Memory behind bridge: cc800000-cc8fffff
> Prefetchable memory behind bridge: 000000004f500000-000000004f6fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
>
> 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at cca39000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci-pci
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation QM87 Express LPC Controller [8086:8c4f] (rev 04)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel driver in use: lpc_ich
>
> 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 04) (prog-if 01 [AHCI 1.0])
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 30
> Region 0: I/O ports at 60a8 [size=8]
> Region 1: I/O ports at 60bc [size=4]
> Region 2: I/O ports at 60a0 [size=8]
> Region 3: I/O ports at 60b8 [size=4]
> Region 4: I/O ports at 6060 [size=32]
> Region 5: Memory at cca38000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
>
> 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at cca34000 (64-bit, non-prefetchable) [size=256]
> Region 4: I/O ports at ef80 [size=32]
>
> 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208GLM [Quadro K610M] [10de:12b9] (rev a1) (prog-if 00 [VGA controller])
> Subsystem: Hewlett-Packard Company Device [103c:1909]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 35
> Region 0: Memory at cb000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at 50000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at 60000000 (64-bit, prefetchable) [size=32M]
> Region 5: I/O ports at 5000 [size=128]
> Expansion ROM at cc080000 [disabled] [size=512K]
> Capabilities: <access denied>
> Kernel driver in use: nouveau
>
> 01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0e0f] (rev a1)
> Subsystem: Hewlett-Packard Company Device [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: snd_hda_intel
>
> 5c:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
> Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 34
> Region 0: Memory at cc900000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: iwlwifi
>
> 5d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader [10ec:5249] (rev 01)
> Subsystem: Hewlett-Packard Company ZBook 15 [103c:1909]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 28
> Region 0: Memory at cc800000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: rtsx_pci
>
>
> ** USB devices:
> Bus 004 Device 002: ID 8087:8000 Intel Corp.
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 002: ID 8087:8008 Intel Corp.
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 002: ID 0424:5434 Standard Microsystems Corp.
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 004: ID 05c8:0369 Cheng Uei Precision Industry Co., Ltd (Foxlink)
> Bus 001 Device 003: ID 138a:003f Validity Sensors, Inc.
> Bus 001 Device 005: ID 8087:07da Intel Corp.
> Bus 001 Device 011: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
> Bus 001 Device 010: ID 413c:2010 Dell Computer Corp. Keyboard
> Bus 001 Device 008: ID 413c:1003 Dell Computer Corp. Keyboard Hub
> Bus 001 Device 012: ID 0424:4060 Standard Microsystems Corp. Ultra Fast Media Reader
> Bus 001 Device 009: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
> Bus 001 Device 007: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
> Bus 001 Device 002: ID 0424:5434 Standard Microsystems Corp.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: 8.0
> APT prefers stable-updates
> APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental')
> Architecture: amd64 (x86_64)
> Foreign Architectures: i386, armel, mipsel
>
> Kernel: Linux 3.17.0-trunk-amd64 (SMP w/8 CPU cores)
> Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
> Init: systemd (via /run/systemd/system)
>
> Versions of packages linux-image-3.16.0-4-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.54
> ii initramfs-tools [linux-initramfs-tool] 0.118
> ii kmod 18-3
> ii linux-base 3.5
> ii module-init-tools 18-3
>
> Versions of packages linux-image-3.16.0-4-amd64 recommends:
> ii firmware-linux-free 3.3
> ii irqbalance 1.0.6-3
>
> Versions of packages linux-image-3.16.0-4-amd64 suggests:
> pn debian-kernel-handbook <none>
> ii extlinux 3:6.03+dfsg-4
> ii grub-efi 2.02~beta2-18
> pn linux-doc-3.16 <none>
>
> Versions of packages linux-image-3.16.0-4-amd64 is related to:
> pn firmware-atheros <none>
> pn firmware-bnx2 <none>
> pn firmware-bnx2x <none>
> pn firmware-brcm80211 <none>
> pn firmware-intelwimax <none>
> pn firmware-ipw2x00 <none>
> pn firmware-ivtv <none>
> ii firmware-iwlwifi 0.43
> pn firmware-libertas <none>
> ii firmware-linux 0.43
> ii firmware-linux-nonfree 0.43
> pn firmware-myricom <none>
> pn firmware-netxen <none>
> pn firmware-qlogic <none>
> pn firmware-ralink <none>
> pn firmware-realtek <none>
> pn xen-hypervisor <none>
>
> -- debconf information:
> linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
> linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
> linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
>
--
Vincent Danjean GPG key ID 0xD17897FA vdanjean@debian.org
GPG key fingerprint: 621E 3509 654D D77C 43F5 CA4A F6AE F2AF D178 97FA
Unofficial pkgs: http://moais.imag.fr/membres/vincent.danjean/deb.html
APT repo: deb http://people.debian.org/~vdanjean/debian unstable main
Reply to: