Bug#772440: linux-image-3.16.0-4-amd64: Built-in display dimmed black if external monitor is plugged in
Package: src:linux
Version: 3.16.7-2
Severity: normal
Control: notfound -1 3.14.15-2
Control: found -1 3.16.3-2
Control: found -1 3.16.5-1
Hi,
most times my laptop screen (LVDS1) is completely dimmed (= black) after
boot at the GDM login prompt, if the external monitor (HDMI1) is or gets
plugged in. Trying to increase the brightness (Fn+F3) shows the
brightness OSD on HDMI1, but the bar only moves up to about max. 5% (=
which is still a black screen).
Thus the GDM login prompt (which is placed on LVDS1) is not visible,
while HDMI1 works but has no content to display.
Switching to tty1 and back fixes the brightness level (= normal LVDS1
with visible login prompt). But it still can't be regulated below about
95% then.
After login in Gnome brightness can be regulated again.
With linux 3.14 brightness is up and regulatable.
With linux 3.17 (3.17.4-1~exp1) it is up, but not regulatable.
It may have happened less often with earlier 3.16 versions.
Without an external monitor brightness is up and regulatable on the
internal display.
It happens indepently if I enable or disable the built-in
display in Gnome before rebooting. (Normally I have turned it off. In
the past it was also turned off then at the login prompt. But I guess
this is an unrelated Gnome issue which just made me realize this at all.)
Due to bug #762809 in libgl1-mesa-dri I have enabled SNA for my Intel
graphics HD4000. But returning to the default does not help here.
There are error messages shown on tty before login. But I get them
always, independently if the screen is dark or not, and also with linux
3.17. So I don't know if this is related. (And a web search shows there
is much noise around them.):
~~~~~
kernel: [ 2.352424] [drm:cpt_set_fifo_underrun_reporting] *ERROR*
uncleared pch fifo underrun on pch transcoder A
kernel: [ 2.352425] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder
A FIFO underrun
~~~~~
Should I file a bug about not being able to regulate the brightness
level upstream and/or clone the bug here?
Any more information?
If I should bisect: against old good 3.14.15 or 3.14.17?
Any tips beyond https://wiki.debian.org/DebianKernel/GitBisect?
May I restrict the bisect to a certain dir/path?
Thanks in advance and for all your work
jre
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=6703b530-7dd3-4ce0-8986-05b1af26806d ro quiet
** Not tainted
** Kernel log:
[ 2.288866] usb 3-2: Product: 4-Port USB 3.0 Hub
[ 2.288868] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 2.292140] hub 3-2:1.0: USB hub found
[ 2.343978] hub 3-2:1.0: 4 ports detected
[ 2.436579] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.457558] psmouse serio1: elantech: assuming hardware version 4
(with firmware version 0x361f00)
[ 2.473082] psmouse serio1: elantech: Synaptics capabilities query
result 0x41, 0x15, 0x0f.
[ 2.533452] usb 1-1.5: New USB device found, idVendor=8087,
idProduct=07da
[ 2.533457] usb 1-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.550045] Bluetooth: Core ver 2.19
[ 2.550069] NET: Registered protocol family 31
[ 2.550070] Bluetooth: HCI device and connection manager initialized
[ 2.550079] Bluetooth: HCI socket layer initialized
[ 2.550082] Bluetooth: L2CAP socket layer initialized
[ 2.550097] Bluetooth: SCO socket layer initialized
[ 2.556570] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input6
[ 2.558149] usbcore: registered new interface driver btusb
[ 2.604542] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.659933] Console: switching to colour frame buffer device 200x56
[ 2.667755] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.667757] i915 0000:00:02.0: registered panic notifier
[ 2.684108] random: nonblocking pool is initialized
[ 2.689485] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 2.689631] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.689713] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 2.689994] ACPI Warning: SystemIO range
0x000000000000efa0-0x000000000000efbf conflicts with OpRegion
0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 2.690000] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 2.707941] RPC: Registered named UNIX socket transport module.
[ 2.707941] RPC: Registered udp transport module.
[ 2.707941] RPC: Registered tcp transport module.
[ 2.707942] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.710448] FS-Cache: Loaded
[ 2.717183] FS-Cache: Netfs 'nfs' registered for caching
[ 2.723645] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.733121] systemd-journald[169]: Received request to flush runtime
journal from PID 1
[ 2.865959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.865963] Bluetooth: BNEP filters: protocol multicast
[ 2.865970] Bluetooth: BNEP socket layer initialized
[ 3.020956] usb 1-1.6: New USB device found, idVendor=2232,
idProduct=1024
[ 3.020960] usb 1-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.020961] usb 1-1.6: Product: Webcam SC-13HDL11624N
[ 3.020963] usb 1-1.6: Manufacturer: Namuga\xffffffc3\xffffffbf
[ 3.077657] Switched to clocksource tsc
[ 3.168030] r8169 0000:02:00.0: firmware: failed to load
rtl_nic/rtl8168e-3.fw (-2)
[ 3.168034] r8169 0000:02:00.0: Direct firmware load failed with error -2
[ 3.168036] r8169 0000:02:00.0: Falling back to user helper
[ 3.168469] r8169 0000:02:00.0 eth0: unable to load firmware patch
rtl_nic/rtl8168e-3.fw (-12)
[ 3.182889] r8169 0000:02:00.0 eth0: link down
[ 3.182933] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.188928] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 3.204887] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 3.270394] media: Linux media interface: v0.10
[ 3.273518] Linux video capture interface: v2.00
[ 3.278316] uvcvideo: Found UVC 1.00 device Webcam SC-13HDL11624N
(2232:1024)
[ 3.317322] usb 2-2.3: new low-speed USB device number 3 using xhci_hcd
[ 3.361450] input: Webcam SC-13HDL11624N as
/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
[ 3.361528] usbcore: registered new interface driver uvcvideo
[ 3.361530] USB Video Class driver (1.1.1)
[ 3.413016] usb 2-2.3: New USB device found, idVendor=046d,
idProduct=c050
[ 3.413021] usb 2-2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.413024] usb 2-2.3: Product: USB-PS/2 Optical Mouse
[ 3.413026] usb 2-2.3: Manufacturer: Logitech
[ 3.413153] usb 2-2.3: ep 0x81 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 3.478035] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 3.484792] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 3.485330] usb 2-2.4: new low-speed USB device number 4 using xhci_hcd
[ 3.569938] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.631430] usb 2-2.4: New USB device found, idVendor=046d,
idProduct=c30e
[ 3.631433] usb 2-2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.631435] usb 2-2.4: Product: HID compliant keyboard
[ 3.631436] usb 2-2.4: Manufacturer: Logitech
[ 3.631525] usb 2-2.4: ep 0x81 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 3.631531] usb 2-2.4: ep 0x82 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 3.647114] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.703372] usbcore: registered new interface driver usbhid
[ 3.703375] usbhid: USB HID core driver
[ 3.705063] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:046D:C050.0001/input/input12
[ 3.705335] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:03:00.0-2.3/input0
[ 3.705488] input: Logitech HID compliant keyboard as
/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-2/2-2.4/2-2.4:1.0/0003:046D:C30E.0002/input/input13
[ 3.705617] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID
v1.10 Keyboard [Logitech HID compliant keyboard] on
usb-0000:03:00.0-2.4/input0
[ 3.714848] input: Logitech HID compliant keyboard as
/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb2/2-2/2-2.4/2-2.4:1.1/0003:046D:C30E.0003/input/input14
[ 3.714957] hid-generic 0003:046D:C30E.0003: input,hidraw2: USB HID
v1.10 Device [Logitech HID compliant keyboard] on
usb-0000:03:00.0-2.4/input1
[ 3.845816] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 6.704889] wlan0: authenticate with 24:65:11:e2:84:58
[ 6.710004] wlan0: send auth to 24:65:11:e2:84:58 (try 1/3)
[ 6.714736] wlan0: authenticated
[ 6.715840] wlan0: associate with 24:65:11:e2:84:58 (try 1/3)
[ 6.719737] wlan0: RX AssocResp from 24:65:11:e2:84:58 (capab=0x411
status=0 aid=2)
[ 6.721897] wlan0: associated
[ 6.721919] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6.721969] cfg80211: Calling CRDA for country: DE
[ 6.723759] cfg80211: Regulatory domain changed to country: DE
[ 6.723762] cfg80211: DFS Master region: ETSI
[ 6.723763] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.723765] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.723766] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 6.723768] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (0 s)
[ 6.723769] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz),
(N/A, 2698 mBm), (0 s)
[ 6.723770] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
(N/A, 4000 mBm), (N/A)
[ 6.815068] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised
by 24:65:11:e2:84:58
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: 900X3C/900X3D/900X3E/900X4C/900X4D
product_version: 0.1
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: 0.1
bios_vendor: Phoenix Technologies Ltd.
bios_version: P04ABK
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: NP900X4C-A07DE
board_version: FAB1
** Loaded modules:
ctr
ccm
hid_generic
usbhid
hid
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
binfmt_misc
bnep
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
joydev
ecb
btusb
bluetooth
6lowpan_iphc
arc4
iwldvm
mac80211
iTCO_wdt
iTCO_vendor_support
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
snd_hda_codec_hdmi
kvm
samsung_laptop
snd_hda_codec_realtek
crc32_pclmul
iwlwifi
snd_hda_codec_generic
ghash_clmulni_intel
cryptd
cfg80211
psmouse
evdev
i2c_i801
serio_raw
pcspkr
rfkill
i915
snd_hda_intel
snd_hda_controller
snd_hda_codec
wmi
drm_kms_helper
snd_hwdep
snd_pcm
drm
tpm_tis
snd_timer
battery
tpm
snd
i2c_algo_bit
soundcore
i2c_core
button
ac
mei_me
video
lpc_ich
shpchp
mfd_core
mei
processor
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
libahci
ehci_pci
libata
xhci_hcd
ehci_hcd
scsi_mod
usbcore
r8169
mii
usb_common
thermal
fan
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor
DRAM Controller [8086:0154] (rev 09)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210
Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0705000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series
Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f0600000-f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0500000-f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM75 Express Chipset LPC
Controller [8086:1e5d] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if
01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at f0708000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset
Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0704000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N
6235 [8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168]
(rev 06)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB
3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 004: ID 2232:1024
Bus 001 Device 003: ID 8087:07da Intel Corp.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 2109:0810
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 046d:c30e Logitech, Inc. UltraX Keyboard (Y-BL49)
Bus 002 Device 003: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 002 Device 002: ID 2109:3431
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.54
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-15
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64:
false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64:
true
Reply to: