Package: src:linux Version: 3.16.7-2 Severity: normal File: /boot/vmlinuz-3.16.0-4-amd64 About 20% of the time that I resume my system from hibernation, it reboots during the resume. After the reboot, the system boots normally (i.e., no resume). For debugging, I have booted with "console=ttyS0,115200n8 no_console_suspend" and without "quiet". I have attached the output for a successful resume. It ends with: [ 30.448711] PM: Read 3382972 kbytes in 10.48 seconds (322.80 MB/s)^M [ 30.456989] nouveau [ DRM] suspending display...^M [ 30.462074] nouveau [ DRM] unpinning framebuffer(s)...^M [ 30.467721] nouveau [ DRM] evicting buffers...^M [ 30.473401] nouveau [ DRM] waiting for kernel channels to go idle...^M [ 30.480214] nouveau [ DRM] suspending client object trees...^M [ 30.492881] nouveau [ DRM] suspending kernel object tree...^M [ 31.834571] PM: quiesce of devices complete after 1376.038 msecs^M [ 31.840934] PM: late quiesce of devices complete after 0.326 msecs^M [ 31.847957] PM: noirq quiesce of devices complete after 0.837 msecs^M [ 31.854229] Disabling non-boot CPUs ...^M [ 31.882768] intel_pstate CPU 1 exiting^M [ 32.018972] smpboot: CPU 1 is now offline^M [ 32.059024] intel_pstate CPU 2 exiting^M [ 32.203233] smpboot: CPU 2 is now offline^M [ 32.235285] intel_pstate CPU 3 exiting^M [ 32.379492] smpboot: CPU 3 is now offline^M [ 32.411547] intel_pstate CPU 4 exiting^M [ 32.499750] usb 2-1-port1: cannot reset (err = -113)^M [ 32.504726] usb 2-1-port1: cannot reset (err = -113)^M [ 32.509699] usb 2-1-port1: cannot reset (err = -113)^M [ 32.514672] usb 2-1-port1: cannot reset (err = -113)^M [ 32.519647] usb 2-1-port1: cannot reset (err = -113)^M [ 32.524613] usb 2-1-port1: Cannot enable. Maybe the USB cable is bad?^M [ 32.531066] usb 2-1-port1: cannot disable (err = -113)^M [ 32.536208] usb 2-1-port1: cannot reset (err = -113)^M [ 32.663915] intel_pstate CPU 5 exiting^M [ 32.784085] smpboot: CPU 5 is now offline^M [ 32.864205] intel_pstate CPU 6 exiting^M [ 32.901389] smpboot: CPU 6 is now offline^M [ 32.948328] intel_pstate CPU 7 exiting^M [ 32.965482] smpboot: CPU 7 is now offline^M [16178.661147] Enabling non-boot CPUs ...^M [16178.664970] x86: Booting SMP configuration:^M In contrast to that, the last messages that I get when the system reboots are: [ 23.104427] PM: quiesce of devices complete after 1487.470 msecs [ 23.110632] PM: late quiesce of devices complete after 0.184 msecs [ 23.117692] PM: noirq quiesce of devices complete after 0.869 msecs [ 23.123964] Disabling non-boot CPUs ... [ 23.160413] intel_pstate CPU 1 exiting [ 23.296607] smpboot: CPU 1 is now offline [ 23.340676] intel_pstate CPU 2 exiting [ 23.476872] smpboot: CPU 2 is now offline [ 23.516937] intel_pstate CPU 3 exiting [ 23.641111] smpboot: CPU 3 is now offline [ 23.677170] intel_pstate CPU 4 exiting [ 23.813368] smpboot: CPU 4 is now offline [ 23.869452] intel_pstate CPU 5 exiting [ 24.005649] smpboot: CPU 5 is now offline [ 24.025679] intel_pstate CPU 6 exiting [ 24.061741] NOHZ: local_softirq_pending 10 [ 24.169889] smpboot: CPU 6 is now offline [ 24.205945] intel_pstate CPU 7 exiting [ 24.223097] smpboot: CPU 7 is now offline I'm working on getting the full log for a broking resume too, but maybe the above is already enough to tell what's going on? -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06) ** Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg0-debian ro quiet splash init=/bin/systemd console=ttyS0,115200n8 no_console_suspend ** Not tainted ** Kernel log: [ 71.279914] Btrfs loaded [ 71.612560] BTRFS: device label debian devid 1 transid 188240 /dev/mapper/vg0-debian [ 71.614252] PM: Starting manual resume from disk [ 71.614256] PM: Hibernation image partition 254:5 present [ 71.614257] PM: Looking for hibernation image. [ 71.614740] PM: Image not found (code -22) [ 71.614743] PM: Hibernation image not present or could not be loaded. [ 71.621129] BTRFS info (device dm-0): disk space caching is enabled [ 75.348213] lp: driver loaded but no devices found [ 75.375569] ppdev: user-space parallel port driver [ 75.448405] fuse init (API version 7.23) [ 75.480857] loop: module loaded [ 75.668043] systemd-udevd[388]: starting version 215 [ 75.987394] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 77.223671] BTRFS info (device dm-0): disk space caching is enabled [ 77.754846] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258) [ 77.754851] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.754854] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 77.754857] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258) [ 77.754859] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.754860] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 77.754862] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258) [ 77.754864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.754864] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 77.754866] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258) [ 77.754868] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.754869] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 77.769188] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 77.769192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.807434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 77.858550] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X [ 78.077429] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 78.218678] intel_rapl: RAPL domain dram detection failed [ 78.309322] iTCO_vendor_support: vendor-support=0 [ 78.634202] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 78.634244] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 78.634433] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 78.805805] asus_wmi: ASUS WMI generic driver loaded [ 78.925416] asus_wmi: Initialization: 0x0 [ 78.925447] asus_wmi: BIOS WMI version: 0.9 [ 78.925494] asus_wmi: SFUN value: 0x0 [ 78.925843] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10 [ 78.927272] asus_wmi: Disabling ACPI video driver [ 78.932244] snd_hda_intel 0000:01:00.1: Disabling MSI [ 78.932253] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 78.932491] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X [ 79.062867] media: Linux media interface: v0.10 [ 79.368570] Linux video capture interface: v2.00 [ 79.390998] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 79.391003] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 79.391006] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 79.391008] sound hdaudioC0D0: mono: mono_out=0x0 [ 79.391010] sound hdaudioC0D0: dig-out=0x11/0x1e [ 79.391011] sound hdaudioC0D0: inputs: [ 79.391014] sound hdaudioC0D0: Front Mic=0x19 [ 79.391017] sound hdaudioC0D0: Rear Mic=0x18 [ 79.391019] sound hdaudioC0D0: Line=0x1a [ 79.403323] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 79.403478] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 79.403628] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 79.403828] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 79.404433] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 79.404542] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 79.404653] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 79.404754] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 79.442156] EXT4-fs (sdc1): recovery complete [ 79.442162] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 79.530661] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 79.530791] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 79.531559] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 79.531719] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 [ 79.700495] usb 6-1.4.1: Warning! Unlikely big volume range (=34656), cval->res is probably wrong. [ 79.700501] usb 6-1.4.1: [3] FU [Mic Capture Volume] ch = 1, val = -32768/1888/1 [ 79.700785] usbcore: registered new interface driver snd-usb-audio [ 79.766511] uvcvideo: Found UVC 1.00 device Monitor Webcam (05a9:2649) [ 79.766960] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 79.767336] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 79.774573] uvcvideo: Failed to initialize the device (-5). [ 79.780232] usbcore: registered new interface driver uvcvideo [ 79.780233] USB Video Class driver (1.1.1) [ 80.567365] Adding 4192252k swap on /dev/mapper/vg0-swap_crypt. Priority:-1 extents:1 across:4192252k FS [ 81.066158] BTRFS: device fsid 8742472d-a9b0-4ab6-b67a-5d21f14f7a38 devid 1 transid 188014 /dev/dm-6 [ 81.076797] BTRFS info (device dm-6): disk space caching is enabled [ 84.802569] systemd-journald[374]: Received request to flush runtime journal from PID 1 [ 85.953508] systemd-journald[374]: File /var/log/journal/b865c77cc176b5ef3b69390a0000000d/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 87.387542] Bridge firewalling registered [ 87.390977] device eth0 entered promiscuous mode [ 87.546619] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 87.649984] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 87.650044] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 87.657238] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 89.185333] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 89.185340] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 89.185374] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 89.185396] br0: port 1(eth0) entered forwarding state [ 89.185402] br0: port 1(eth0) entered forwarding state [ 89.185448] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 104.218257] br0: port 1(eth0) entered forwarding state [ 106.259374] tun: Universal TUN/TAP device driver, 1.6 [ 106.259377] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 3603 board_vendor: ASUSTeK Computer INC. board_name: P8Z68-V GEN3 board_version: Rev 1.xx ** Loaded modules: tun binfmt_misc bridge stp llc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core snd_usb_audio snd_usbmidi_lib v4l2_common snd_rawmidi ext4 snd_hda_codec_realtek snd_seq_device videodev snd_hda_codec_generic snd_hda_codec_hdmi crc16 media mbcache jbd2 snd_hda_intel eeepc_wmi snd_hda_controller asus_wmi sparse_keymap rfkill snd_hda_codec iTCO_wdt x86_pkg_temp_thermal intel_powerclamp iTCO_vendor_support snd_hwdep snd_pcm snd_timer psmouse intel_rapl snd pcspkr serio_raw processor evdev battery soundcore mei_me mei shpchp i2c_i801 lpc_ich mfd_core nct6775 hwmon_vid coretemp kvm_intel kvm loop fuse parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq sha256_ssse3 sha256_generic algif_skcipher af_alg hid_generic usbhid usb_storage hid dm_crypt dm_mod i915 sg sr_mod sd_mod crc_t10dif cdrom crct10dif_generic crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ghash_clmulni_intel nouveau aesni_intel aes_x86_64 mxm_wmi ahci lrw gf128mul glue_helper ttm ablk_helper libahci i2c_algo_bit cryptd drm_kms_helper ehci_pci libata xhci_hcd ehci_hcd scsi_mod e1000e drm usbcore ptp usb_common pps_core i2c_core fan thermal video wmi thermal_sys button ** PCI devices: not available ** USB devices: not available -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-3.16.0-4-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-15 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
Attachment:
resume-working.txt
Description: Binary data