Bug#731473: Wheezy: eth0 not working
Package: src:linux
Version: 3.2.63-2+deb7u1
Followup-For: Bug #731473
Dear Maintainer,
Same problem here. Fresh wheezy install on Shuttle DS47 hardware. Wired
ethernet doesn't work (link up, no traffic - neither via DHCP nor via
fixed IP).
Got wireless ethernet to work by installing realtek drivers from debian
non-free repository, but it doesn't help for wired.
Note : As C/C++ developer, I'm available for kernel patch attempts or
hardcore troubleshooting if need be.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=d03a347f-4673-4728-a3d0-090f9f3cb14a ro quiet
** Not tainted
** Kernel log:
[ 3.638928] usb 3-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.638932] usb 3-1.4: Product: Cruzer Blade
[ 3.638935] usb 3-1.4: Manufacturer: SanDisk
[ 3.638938] usb 3-1.4: SerialNumber: 4C530001200717120275
[ 3.639295] scsi6 : usb-storage 3-1.4:1.0
[ 3.716668] udevd[361]: starting version 175
[ 3.795083] iTCO_vendor_support: vendor-support=0
[ 3.795953] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.796083] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 3.796172] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.819085] [drm] Initialized drm 1.1.0 20060810
[ 3.832891] ACPI: Requesting acpi_cpufreq
[ 3.833329] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.833341] ACPI: Power Button [PWRB]
[ 3.842903] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.842956] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.843371] cfg80211: Calling CRDA to update world regulatory domain
[ 3.864881] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.864954] ACPI: Power Button [PWRF]
[ 3.893088] rtl8192ce 0000:01:00.0: setting latency timer to 64
[ 3.893176] rtl8192ce:_rtl92ce_read_chip_version():<0-0> Chip Version
ID: Unknown. Bug?
[ 3.906065] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.906566] ****** This B_CUT device may not work with kernels 3.6
and earlier
[ 3.915750] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.010148] rtl8192ce 0000:01:00.0: firmware: agent loaded
rtlwifi/rtl8192cfwU_B.bin into memory
[ 4.014760] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 4.015702] rtlwifi: wireless switch is on
[ 4.311222] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE
9454 PQ: 0 ANSI: 0
[ 4.314013] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.315695] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 4.412221] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 4.412515] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.412996] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.413459] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts
with ACPI region SMBI [io 0xf040-0xf04f]
[ 4.413466] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 4.414093] i915 0000:00:02.0: setting latency timer to 64
[ 4.474103] mtrr: type mismatch for e0000000,10000000 old: write-back
new: write-combining
[ 4.474108] [drm] MTRR allocation failed. Graphics performance may
suffer.
[ 4.474475] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 4.474488] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.474491] [drm] Driver supports precise vblank timestamp query.
[ 4.474617] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call
failed
[ 4.474722] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.487461] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G2
PMAP PQ: 0 ANSI: 0 CCS
[ 4.488782] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 4.490246] sd 5:0:0:0: [sdd] 7827456 512-byte logical blocks: (4.00
GB/3.73 GiB)
[ 4.490736] sd 5:0:0:0: [sdd] Write Protect is off
[ 4.490741] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 4.491244] sd 5:0:0:0: [sdd] No Caching mode page found
[ 4.491308] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 4.495859] sd 5:0:0:0: [sdd] No Caching mode page found
[ 4.495931] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 4.497700] sdd: sdd1
[ 4.501616] sd 5:0:0:0: [sdd] No Caching mode page found
[ 4.501690] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 4.501760] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 4.519056] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.637598] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade
1.26 PQ: 0 ANSI: 6
[ 4.639374] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.679035] sd 6:0:0:0: [sde] 15633408 512-byte logical blocks: (8.00
GB/7.45 GiB)
[ 4.679776] sd 6:0:0:0: [sde] Write Protect is off
[ 4.679782] sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
[ 4.680535] sd 6:0:0:0: [sde] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.683921] sde: sde1
[ 4.686519] sd 6:0:0:0: [sde] Attached SCSI disk
[ 4.843751] fbcon: inteldrmfb (fb0) is primary device
[ 5.033699] Console: switching to colour frame buffer device 160x64
[ 5.047513] fb0: inteldrmfb frame buffer device
[ 5.047517] drm: registered panic notifier
[ 5.059434] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 5.059560] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.059603] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 5.507808] Adding 2421756k swap on /dev/sdb5. Priority:-1 extents:1
across:2421756k SS
[ 5.537462] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 5.591661] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 5.635087] loop: module loaded
[ 6.723375] r8169 0000:02:00.0: eth0: link down
[ 6.723424] r8169 0000:02:00.0: eth0: link down
[ 6.724150] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.367426] r8169 0000:02:00.0: eth0: link up
[ 8.368230] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.437762] eth0: no IPv6 routers present
[ 68.149059] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin
[ 68.490453] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 70.395094] wlan0: authenticate with 00:0c:f6:29:15:25 (try 1)
[ 70.396788] wlan0: authenticated
[ 70.397194] wlan0: associate with 00:0c:f6:29:15:25 (try 1)
[ 70.411717] wlan0: RX AssocResp from 00:0c:f6:29:15:25 (capab=0x411
status=0 aid=193)
[ 70.411727] wlan0: associated
[ 70.411733] wlan0: invalid AID value 0xc1; bits 15:14 not set
[ 70.412836] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 77.419012] RPC: Registered named UNIX socket transport module.
[ 77.419020] RPC: Registered udp transport module.
[ 77.419024] RPC: Registered tcp transport module.
[ 77.419028] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 77.428029] FS-Cache: Loaded
[ 77.442279] FS-Cache: Netfs 'nfs' registered for caching
[ 77.451571] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 78.876160] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 81.168805] wlan0: no IPv6 routers present
** Model information
sys_vendor: Shuttle Inc.
product_name: DS47D
product_version: V1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 1.03
board_vendor: Shuttle Inc.
board_name: FS47D
board_version: 1.0
** Loaded modules:
xt_multiport
iptable_filter
ip_tables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
aes_x86_64
aes_generic
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
arc4
coretemp
crc32c_intel
ghash_clmulni_intel
cryptd
pcspkr
rtl8192ce
i915
rtlwifi
i2c_i801
rtl8192c_common
acpi_cpufreq
mperf
video
mac80211
joydev
evdev
snd_hda_intel
button
processor
drm_kms_helper
cfg80211
snd_hda_codec
drm
snd_hwdep
rfkill
i2c_algo_bit
snd_pcm
i2c_core
snd_page_alloc
snd_timer
iTCO_wdt
iTCO_vendor_support
snd
soundcore
ext4
crc16
jbd2
mbcache
usb_storage
usbhid
hid
sg
sd_mod
crc_t10dif
fan
thermal
thermal_sys
ahci
libahci
xhci_hcd
libata
ehci_hcd
r8169
mii
scsi_mod
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
auto wlan0
iface wlan0 inet dhcp
wpa-ssid TLG
wpa-psk ****************************************************************
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 80:ee:73:76:94:b5 brd ff:ff:ff:ff:ff:ff
inet6 fe80::82ee:73ff:fe76:94b5/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 80:ee:73:76:94:b7 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 64:5a:04:03:69:3c brd ff:ff:ff:ff:ff:ff
inet 192.168.254.54/24 brd 192.168.254.255 scope global wlan0
inet6 fe80::665a:4ff:fe03:693c/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 240 4 0 0 0 0 0 0
240 4 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
wlan0: 48912 76 0 0 0 0 0 0
11398 89 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 2358
13 0 0 0 0 0 0
*** Protocol statistics:
Ip:
84 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
82 incoming packets delivered
75 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
6 active connections openings
0 passive connection openings
2 failed connection attempts
1 connection resets received
0 connections established
58 segments received
53 segments send out
2 segments retransmited
4 bad segments received.
3 resets sent
Udp:
40 packets received
0 packets to unknown port received.
0 packet receive errors
22 packets sent
UdpLite:
TcpExt:
30 packets directly queued to recvmsg prequeue.
30554 bytes directly received in process context from prequeue
10 packet headers predicted
21 packets header predicted and directly queued to user
10 acknowledgments not containing data payload received
1 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
2 other TCP timeouts
1 connections reset due to early user close
TCPChallengeACK: 4
TCPSYNChallenge: 4
IpExt:
InBcastPkts: 14
OutBcastPkts: 14
InOctets: 49018
OutOctets: 7202
InBcastOctets: 1622
OutBcastOctets: 1622
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
Generation Core Processor Family Integrated Graphics Controller
[8086:0106] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series
Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7a00000-f7afffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7900000-f79fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7800000-f78fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation 7 Series Chipset Family LPC
Controller [8086:1e5f] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if
01 [AHCI 1.0])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset
Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8175]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7b00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8192ce
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0c)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f7a00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: ASMedia Technology Inc. Device
[1b21:1142] (prog-if 30 [XHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 0c)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:4018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at f7800000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 045e:07f8 Microsoft Corp.
Bus 003 Device 003: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS
Flash Card Reader
Bus 003 Device 004: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102
Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 003 Device 005: ID 0781:5567 SanDisk Corp. Cruzer Blade
-- System Information:
Debian Release: 7.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: