[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#769466: /boot/vmlinuz-3.16.0-4-amd64: Kernel Oops when specifying console=ttyS0



Control: tag -1 -moreinfo

On 11/13/2014 01:45 PM, Ben Hutchings wrote:
> On Thu, 2014-11-13 at 12:53 -0800, Nikolaus Rath wrote:
>> Package: src:linux
>> Version: 3.16.7-2
>> Severity: normal
>> File: /boot/vmlinuz-3.16.0-4-amd64
>>
>> Hello,
>>
>> When adding 
>>
>>   console=ttyS0,115200n8 console=tty0 no_console_suspend
>>
>> to the kernel command line, I'm getting the following kernel Oops during
>> boot (full quote in kernel.log below):
>>
>> [...]
>> [   13.687971] 0000:07:01.0: ttyS0 at I/O 0xc050 (irq = 19, base_baud = 115200) is a 16550A
>> [   13.687980] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
>> [   13.688130] BUG: unable to handle kernel paging request at ffffffff819419bf
>> [   13.688299] IP: [<ffffffff819419bf>] serial8250_console_setup+0x0/0xaa
>> [   13.688604] PGD 1816067 PUD 1817063 PMD 215f93063 PTE 8000000001941163
>> [   13.688911] Oops: 0011 [#1] SMP 
>> [...]
>>
>> Please let me know if I can do something to debug this further.
> [...]
> 
> The log didn't include the full oops message; please can you send that
> as I don't understand why anything would call this function at this
> point.  (It is only meant to be called during kernel initialisation,
> before starting the init program.  At this point the code has been
> freed, hence the page fault.)

Full log is attached. Sorry, I did not realize that the automatically
included log was truncated.

-Nikolaus

[    0.000000] CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg0-debian ro quiet splash init=/bin/systemd console=ttyS0,115200n8 console=tty0 no_console_suspend
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000deb90000-0x00000000df13ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df140000-0x00000000df384fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df385000-0x00000000df392fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df393000-0x00000000df3bffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df3c0000-0x00000000df3c4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df3c5000-0x00000000df407fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df408000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z68-V GEN3, BIOS 3603 11/09/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DBFFF write-protect
[    0.000000]   DC000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 210000000 mask FF8000000 write-back
[    0.000000]   3 base 218000000 mask FFC000000 write-back
[    0.000000]   4 base 21C000000 mask FFE000000 write-back
[    0.000000]   5 base 21E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f] mapped at [ffff8800000fcd90]
[    0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[    0.000000]  [mem 0x21ee00000-0x21effffff] page 2M
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[    0.000000]  [mem 0x21c000000-0x21edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[    0.000000]  [mem 0x200000000-0x21bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdeb8ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xde9fffff] page 2M
[    0.000000]  [mem 0xdea00000-0xdeb8ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdf408000-0xdf7fffff]
[    0.000000]  [mem 0xdf408000-0xdf5fffff] page 4k
[    0.000000]  [mem 0xdf600000-0xdf7fffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35a2a000-0x36d0cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DF385070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DF390C00 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DF385168 00BA92 (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DF3BEF80 000040
[    0.000000] ACPI: APIC 0x00000000DF390CF8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DF390D90 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DF390DD0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DF390E08 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DF391178 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DF391B28 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[    0.000000]   NODE_DATA [mem 0x21eff4000-0x21eff8fff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216600000-ffff88021d7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x21effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00090fff]
[    0.000000]   node   0: [mem 0x00100000-0xdeb8ffff]
[    0.000000]   node   0: [mem 0xdf408000-0xdf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x21effffff]
[    0.000000] On node 0 totalpages: 2088728
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3984 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12431 pages used for memmap
[    0.000000]   DMA32 zone: 909192 pages, LIFO batch:31
[    0.000000]   Normal zone: 16072 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdeb90000-0xdf13ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf140000-0xdf384fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf385000-0xdf392fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf393000-0xdf3bffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u262144
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060148
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg0-debian ro quiet splash init=/bin/systemd console=ttyS0,115200n8 console=tty0 no_console_suspend
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8140272K/8354912K available (5191K kernel code, 942K rwdata, 1824K rodata, 1200K init, 840K bss, 214640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3499.773 MHz processor
[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.54 BogoMIPS (lpj=13999092)
[    0.000025] pid_max: default: 32768 minimum: 301
[    0.000031] ACPI: Core revision 20140424
[    0.005618] ACPI: All ACPI Tables successfully acquired
[    0.217881] Security Framework initialized
[    0.217887] AppArmor: AppArmor disabled by boot time parameter
[    0.217888] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.218237] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.219368] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.219845] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.219851] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.220017] Initializing cgroup subsys memory
[    0.220021] Initializing cgroup subsys devices
[    0.220025] Initializing cgroup subsys freezer
[    0.220027] Initializing cgroup subsys net_cls
[    0.220030] Initializing cgroup subsys blkio
[    0.220033] Initializing cgroup subsys perf_event
[    0.220034] Initializing cgroup subsys net_prio
[    0.220052] CPU: Physical Processor ID: 0
[    0.220053] CPU: Processor Core ID: 0
[    0.220056] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.220058] mce: CPU supports 9 MCE banks
[    0.220067] CPU0: Thermal monitoring enabled (TM1)
[    0.220074] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.220148] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
[    0.221041] ftrace: allocating 21551 entries in 85 pages
[    0.228215] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.267954] smpboot: CPU0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz (fam: 06, model: 2a, stepping: 07)
[    0.267958] TSC deadline timer enabled
[    0.267975] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.267989] ... version:                3
[    0.267990] ... bit width:              48
[    0.267991] ... generic registers:      4
[    0.267991] ... value mask:             0000ffffffffffff
[    0.267992] ... max period:             0000ffffffffffff
[    0.267993] ... fixed-purpose events:   3
[    0.267993] ... event mask:             000000070000000f
[    0.269009] x86: Booting SMP configuration:
[    0.269011] .... node  #0, CPUs:      #1
[    0.279619] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[    0.282214] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.282291]  #2
[    0.292825] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.295523]  #3
[    0.306043] CPU3 microcode updated early to revision 0x29, date = 2013-06-12
[    0.308757]  #4 #5 #6 #7
[    0.361649] x86: Booted up 1 node, 8 CPUs
[    0.361652] smpboot: Total of 8 processors activated (55996.36 BogoMIPS)
[    0.367580] devtmpfs: initialized
[    0.369694] PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes)
[    0.369728] PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes)
[    0.369732] PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes)
[    0.370384] pinctrl core: initialized pinctrl subsystem
[    0.370442] NET: Registered protocol family 16
[    0.370537] cpuidle: using governor ladder
[    0.370538] cpuidle: using governor menu
[    0.370573] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.370574] ACPI: bus type PCI registered
[    0.370575] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.370641] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.370642] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.370700] PCI: Using configuration type 1 for base access
[    0.379741] ACPI: Added _OSI(Module Device)
[    0.379742] ACPI: Added _OSI(Processor Device)
[    0.379743] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.379744] ACPI: Added _OSI(Processor Aggregator Device)
[    0.381567] ACPI: Executed 1 blocks of module-level executable AML code
[    0.395728] ACPI: Dynamic OEM Table Load:
[    0.395733] ACPI: SSDT 0xFFFF880215FC2000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.408994] ACPI: Dynamic OEM Table Load:
[    0.408998] ACPI: SSDT 0xFFFF880215A55000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.419536] ACPI: Dynamic OEM Table Load:
[    0.419539] ACPI: SSDT 0xFFFF880215AA1800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.432351] ACPI: Interpreter enabled
[    0.432358] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.432368] ACPI: (supports S0 S1 S3 S4 S5)
[    0.432369] ACPI: Using IOAPIC for interrupt routing
[    0.432390] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.437141] ACPI: Power Resource [FN00] (off)
[    0.437202] ACPI: Power Resource [FN01] (off)
[    0.437260] ACPI: Power Resource [FN02] (off)
[    0.437317] ACPI: Power Resource [FN03] (off)
[    0.437374] ACPI: Power Resource [FN04] (off)
[    0.437816] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.437820] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.437867] \_SB_.PCI0:_OSC invalid UUID
[    0.437867] _OSC request data:1 1f 0 
[    0.437870] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.438379] PCI host bridge to bus 0000:00
[    0.438381] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.438382] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.438383] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.438385] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.438386] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.438387] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.438388] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.438389] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[    0.438394] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.438463] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.438486] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.438518] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.438573] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.438595] pci 0000:00:16.0: reg 0x10: [mem 0xf742c000-0xf742c00f 64bit]
[    0.438665] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.438737] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[    0.438753] pci 0000:00:19.0: reg 0x10: [mem 0xf7400000-0xf741ffff]
[    0.438761] pci 0000:00:19.0: reg 0x14: [mem 0xf7429000-0xf7429fff]
[    0.438768] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
[    0.438826] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.438862] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.438897] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.438916] pci 0000:00:1a.0: reg 0x10: [mem 0xf7428000-0xf74283ff]
[    0.438999] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.439046] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.439080] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.439094] pci 0000:00:1b.0: reg 0x10: [mem 0xf7420000-0xf7423fff 64bit]
[    0.439161] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.439199] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.439231] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.439306] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.439346] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.439376] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.439451] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.439491] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.439526] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.439602] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.439642] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.439673] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.439748] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.439788] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.439820] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.439895] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.439934] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.439970] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.439989] pci 0000:00:1d.0: reg 0x10: [mem 0xf7427000-0xf74273ff]
[    0.440072] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.440142] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[    0.440298] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.440314] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
[    0.440321] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
[    0.440327] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
[    0.440334] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
[    0.440341] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.440348] pci 0000:00:1f.2: reg 0x24: [mem 0xf7426000-0xf74267ff]
[    0.440388] pci 0000:00:1f.2: PME# supported from D3hot
[    0.440449] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.440462] pci 0000:00:1f.3: reg 0x10: [mem 0xf7425000-0xf74250ff 64bit]
[    0.440481] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.440585] pci 0000:01:00.0: [10de:1180] type 00 class 0x030000
[    0.440595] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.440603] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.440612] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.440618] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.440625] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.440699] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.440709] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.451538] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.451540] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.451541] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.451544] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.451600] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.451689] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.451720] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7307fff 64bit]
[    0.451872] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.451903] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.463559] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.463564] pci 0000:00:1c.1:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.463656] pci 0000:04:00.0: [197b:2362] type 00 class 0x010185
[    0.463693] pci 0000:04:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.463709] pci 0000:04:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.463725] pci 0000:04:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.463740] pci 0000:04:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.463756] pci 0000:04:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.463771] pci 0000:04:00.0: reg 0x24: [mem 0xf7210000-0xf72101ff]
[    0.463786] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.463852] pci 0000:04:00.0: PME# supported from D3hot
[    0.463880] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.475578] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.475581] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.475585] pci 0000:00:1c.3:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.475670] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.475702] pci 0000:05:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[    0.475854] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.475886] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.487595] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.487601] pci 0000:00:1c.4:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.487674] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[    0.487790] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.487815] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
[    0.487819] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.487827] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.487828] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.487829] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.487830] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.487831] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.487832] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.487834] pci 0000:00:1c.6:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    0.487889] pci 0000:07:01.0: [9710:9835] type 00 class 0x078000
[    0.487913] pci 0000:07:01.0: reg 0x10: [io  0xc050-0xc057]
[    0.487930] pci 0000:07:01.0: reg 0x14: [io  0xc040-0xc047]
[    0.487946] pci 0000:07:01.0: reg 0x18: [io  0xc030-0xc037]
[    0.487963] pci 0000:07:01.0: reg 0x1c: [io  0xc020-0xc027]
[    0.487980] pci 0000:07:01.0: reg 0x20: [io  0xc010-0xc017]
[    0.487997] pci 0000:07:01.0: reg 0x24: [io  0xc000-0xc00f]
[    0.488118] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[    0.488127] pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff]
[    0.488140] pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.488141] pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.488143] pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.488144] pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.488145] pci 0000:06:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.488146] pci 0000:06:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.488147] pci 0000:06:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.488148] pci 0000:06:00.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[    0.488513] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.488551] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.488587] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.488624] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.488661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.488697] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.488733] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.488769] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.488944] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.488959] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.489036] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.489038] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.489039] vgaarb: loaded
[    0.489040] vgaarb: bridge control possible 0000:01:00.0
[    0.489078] PCI: Using ACPI for IRQ routing
[    0.490377] PCI: pci_cache_line_size set to 64 bytes
[    0.490434] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
[    0.490435] e820: reserve RAM buffer [mem 0xdeb90000-0xdfffffff]
[    0.490436] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.490437] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.490542] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.490545] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.492570] Switched to clocksource hpet
[    0.496073] pnp: PnP ACPI init
[    0.496086] ACPI: bus type PNP registered
[    0.496137] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.496140] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.496196] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.496197] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.496199] system 00:01: [io  0xffff] has been reserved
[    0.496200] system 00:01: [io  0xffff] has been reserved
[    0.496202] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.496203] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.496204] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.496205] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.496207] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496229] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.496265] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.496267] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.496328] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.496329] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496367] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.496369] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496548] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.496549] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.496551] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.496552] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.496553] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.496555] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.496556] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.496557] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.496559] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.496570] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.496571] system 00:06: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.496572] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496659] pnp: PnP ACPI: found 7 devices
[    0.496660] ACPI: bus type PNP unregistered
[    0.502739] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.502742] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.502743] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.502784] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.502785] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.502787] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.502790] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff]
[    0.502794] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.502795] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.502797] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.502799] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.502801] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.502802] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.502805] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.502807] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.502812] pci 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe02fffff]
[    0.502815] pci 0000:00:1c.0:   bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.502820] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.502825] pci 0000:00:1c.1:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.502833] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7200000-0xf720ffff pref]
[    0.502834] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.502837] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.502841] pci 0000:00:1c.3:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.502848] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.502853] pci 0000:00:1c.4:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.502860] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.502864] pci 0000:06:00.0:   bridge window [io  0xc000-0xcfff]
[    0.502883] pci 0000:00:1c.6: PCI bridge to [bus 06-07]
[    0.502885] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.502895] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.502897] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.502898] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.502899] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
[    0.502900] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
[    0.502901] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
[    0.502902] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff]
[    0.502903] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.502904] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.502906] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.502907] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.502908] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff]
[    0.502909] pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.502910] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.502911] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.502912] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.502913] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.502915] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.502916] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.502917] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.502918] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.502919] pci_bus 0000:06: resource 7 [mem 0x000dc000-0x000dffff]
[    0.502920] pci_bus 0000:06: resource 8 [mem 0x000e0000-0x000e3fff]
[    0.502921] pci_bus 0000:06: resource 9 [mem 0x000e4000-0x000e7fff]
[    0.502922] pci_bus 0000:06: resource 10 [mem 0xe0000000-0xfeafffff]
[    0.502923] pci_bus 0000:07: resource 0 [io  0xc000-0xcfff]
[    0.502924] pci_bus 0000:07: resource 4 [io  0xc000-0xcfff]
[    0.502925] pci_bus 0000:07: resource 5 [io  0x0000-0x0cf7]
[    0.502927] pci_bus 0000:07: resource 6 [io  0x0d00-0xffff]
[    0.502928] pci_bus 0000:07: resource 7 [mem 0x000a0000-0x000bffff]
[    0.502929] pci_bus 0000:07: resource 8 [mem 0x000dc000-0x000dffff]
[    0.502930] pci_bus 0000:07: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.502931] pci_bus 0000:07: resource 10 [mem 0x000e4000-0x000e7fff]
[    0.502932] pci_bus 0000:07: resource 11 [mem 0xe0000000-0xfeafffff]
[    0.503007] NET: Registered protocol family 2
[    0.503230] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.503338] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.503448] TCP: Hash tables configured (established 65536 bind 65536)
[    0.503459] TCP: reno registered
[    0.503466] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.503489] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.503569] NET: Registered protocol family 1
[    0.544719] pci 0000:01:00.0: Video device with shadowed ROM
[    0.544957] PCI: CLS 64 bytes, default 64
[    0.544988] Unpacking initramfs...
[    0.777649] Freeing initrd memory: 19340K (ffff880035a2a000 - ffff880036d0d000)
[    0.777674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.777675] software IO TLB [mem 0xdab90000-0xdeb90000] (64MB) mapped at [ffff8800dab90000-ffff8800deb8ffff]
[    0.777992] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.778032] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[    0.778038] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[    0.778041] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[    0.778046] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[    0.778052] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29
[    0.778057] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29
[    0.778062] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29
[    0.778069] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29
[    0.778114] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.778364] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.778404] audit: initializing netlink subsys (disabled)
[    0.778416] audit: type=2000 audit(1415922939.564:1): initialized
[    0.778704] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.778719] zbud: loaded
[    0.778900] VFS: Disk quotas dquot_6.5.2
[    0.778919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.778964] msgmni has been set to 15936
[    0.779214] alg: No test for stdrng (krng)
[    0.779238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.779287] io scheduler noop registered
[    0.779289] io scheduler deadline registered
[    0.779327] io scheduler cfq registered (default)
[    0.779470] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.779767] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.779781] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.779810] intel_idle: MWAIT substates: 0x1120
[    0.779811] intel_idle: v0.4 model 0x2A
[    0.779812] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.780044] GHES: HEST is not enabled!
[    0.780096] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.780442] Linux agpgart interface v0.103
[    0.780533] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.783360] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.783363] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.783438] mousedev: PS/2 mouse device common for all mice
[    0.783464] rtc_cmos 00:02: RTC can wake from S4
[    0.783581] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.783608] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.783616] Intel P-state driver initializing.
[    0.783626] Intel pstate controlling: cpu 0
[    0.783638] Intel pstate controlling: cpu 1
[    0.783652] Intel pstate controlling: cpu 2
[    0.783665] Intel pstate controlling: cpu 3
[    0.783678] Intel pstate controlling: cpu 4
[    0.783692] Intel pstate controlling: cpu 5
[    0.783706] Intel pstate controlling: cpu 6
[    0.783719] Intel pstate controlling: cpu 7
[    0.783757] ledtrig-cpu: registered to indicate activity on CPUs
[    0.784503] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.784505] AMD IOMMUv2 functionality not available on this system
[    0.784635] TCP: cubic registered
[    0.784782] NET: Registered protocol family 10
[    0.785103] mip6: Mobile IPv6
[    0.785108] NET: Registered protocol family 17
[    0.785114] mpls_gso: MPLS GSO support
[    0.785674] registered taskstats version 1
[    0.786352] rtc_cmos 00:02: setting system clock to 2014-11-13 23:55:40 UTC (1415922940)
[    0.786458] PM: Hibernation image not present or could not be loaded.
[    0.787448] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
[    0.787450] Write protecting the kernel read-only data: 8192k
[    0.789775] Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000)
[    0.790184] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
[    0.810381] systemd-udevd[93]: starting version 215
[    0.810570] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.814558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.814562] ACPI: Power Button [PWRB]
[    0.814695] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.814698] ACPI: Power Button [PWRF]
[    0.815008] wmi: Mapper loaded
[    0.819430] pps_core: LinuxPPS API ver. 1 registered
[    0.819433] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.819745] PTP clock support registered
[    0.820310] ACPI: bus type USB registered
[    0.820336] usbcore: registered new interface driver usbfs
[    0.820345] usbcore: registered new interface driver hub
[    0.820444] usbcore: registered new device driver usb
[    0.820907] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.820908] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    0.821306] [drm] Initialized drm 1.1.0 20060810
[    0.821314] SCSI subsystem initialized
[    0.822440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.822494] libata version 3.00 loaded.
[    0.822804] ehci-pci: EHCI PCI platform driver
[    0.824408] AVX version of gcm_enc/dec engaged.
[    0.825382] MXM: GUID detected in BIOS
[    0.825620] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.827235] alg: No test for crc32 (crc32-pclmul)
[    0.841234] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.841240] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.841266] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.841292] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    0.841403] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e4000a2
[    0.841404] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
[    0.841405] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    0.841419] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    0.841427] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    0.841428] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    0.841648] thermal LNXTHERM:00: registered as thermal_zone0
[    0.841653] ACPI: Thermal Zone [TZ00] (28 C)
[    0.842022] thermal LNXTHERM:01: registered as thermal_zone1
[    0.842023] ACPI: Thermal Zone [TZ01] (30 C)
[    0.842130] ACPI: Fan [FAN0] (off)
[    0.842180] ACPI: Fan [FAN1] (off)
[    0.842214] ACPI: Fan [FAN2] (off)
[    0.842247] ACPI: Fan [FAN3] (off)
[    0.842275] ACPI: Fan [FAN4] (off)
[    0.902576] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.902579] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.902581] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.902583] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.902585] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.902587] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[    0.902589] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[    0.902591] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[    0.902766] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.902767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.902768] usb usb1: Product: xHCI Host Controller
[    0.902769] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.902770] usb usb1: SerialNumber: 0000:03:00.0
[    0.902910] hub 1-0:1.0: USB hub found
[    0.902924] hub 1-0:1.0: 2 ports detected
[    0.903028] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.903030] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.903049] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    0.903051] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    0.903061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.903062] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.903063] usb usb2: Product: xHCI Host Controller
[    0.903063] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.903064] usb usb2: SerialNumber: 0000:03:00.0
[    0.903117] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    0.903119] nouveau  [   VBIOS][0000:01:00.0] version 80.04.47.00.0d
[    0.903132] hub 2-0:1.0: USB hub found
[    0.903142] hub 2-0:1.0: 2 ports detected
[    0.903253] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.903256] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    0.903393] nouveau 0000:01:00.0: irq 50 for MSI/MSI-X
[    0.903402] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    0.903466] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    0.903467] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    0.903468] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    0.905493] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 987500uv
[    0.934299] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
[    0.934309] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    0.934331] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    0.934375] nouveau  [     CLK][0000:01:00.0] 07: core 324 MHz memory 648 MHz 
[    0.934392] nouveau  [     CLK][0000:01:00.0] 0a: core 324-862 MHz memory 1620 MHz 
[    0.934440] nouveau  [     CLK][0000:01:00.0] 0d: core 540-1346 MHz memory 6008 MHz 
[    0.934498] nouveau  [     CLK][0000:01:00.0] 0f: core 540-1346 MHz memory 6008 MHz 
[    0.934684] nouveau  [     CLK][0000:01:00.0] --: core 324 MHz memory 648 MHz 
[    0.955154] [TTM] Zone  kernel: Available graphics memory: 4080998 kiB
[    0.955156] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    0.955157] [TTM] Initializing pool allocator
[    0.955160] [TTM] Initializing DMA pool allocator
[    0.955167] nouveau  [     DRM] VRAM: 2048 MiB
[    0.955167] nouveau  [     DRM] GART: 1048576 MiB
[    0.955170] nouveau  [     DRM] TMDS table version 2.0
[    0.955170] nouveau  [     DRM] DCB version 4.0
[    0.955172] nouveau  [     DRM] DCB outp 00: 01000f02 00020030
[    0.955173] nouveau  [     DRM] DCB outp 01: 02000f00 00000000
[    0.955174] nouveau  [     DRM] DCB outp 02: 08011f82 00020030
[    0.955174] nouveau  [     DRM] DCB outp 03: 02022f62 00020010
[    0.955175] nouveau  [     DRM] DCB outp 04: 04833fb6 0f420010
[    0.955176] nouveau  [     DRM] DCB outp 05: 04033f72 00020010
[    0.955177] nouveau  [     DRM] DCB conn 00: 00001030
[    0.955178] nouveau  [     DRM] DCB conn 01: 00020131
[    0.955179] nouveau  [     DRM] DCB conn 02: 00010261
[    0.955179] nouveau  [     DRM] DCB conn 03: 00002346
[    0.956613] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.956614] [drm] Driver supports precise vblank timestamp query.
[    0.960762] nouveau  [     DRM] MM: using COPY for buffer copies
[    0.964529] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[    0.964532] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
[    0.964534] xhci_hcd 0000:05:00.0: irq 53 for MSI/MSI-X
[    0.964535] xhci_hcd 0000:05:00.0: irq 54 for MSI/MSI-X
[    0.964537] xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X
[    0.964540] xhci_hcd 0000:05:00.0: irq 56 for MSI/MSI-X
[    0.964542] xhci_hcd 0000:05:00.0: irq 57 for MSI/MSI-X
[    0.964543] xhci_hcd 0000:05:00.0: irq 58 for MSI/MSI-X
[    0.964664] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.964665] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964666] usb usb3: Product: xHCI Host Controller
[    0.964667] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.964668] usb usb3: SerialNumber: 0000:05:00.0
[    0.964769] hub 3-0:1.0: USB hub found
[    0.964776] hub 3-0:1.0: 2 ports detected
[    0.964833] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.964835] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    0.964864] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.964865] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964865] usb usb4: Product: xHCI Host Controller
[    0.964866] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.964867] usb usb4: SerialNumber: 0000:05:00.0
[    0.964944] hub 4-0:1.0: USB hub found
[    0.964952] hub 4-0:1.0: 2 ports detected
[    1.108279] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.108281] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:bf:a2:9f
[    1.108282] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.108340] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.108531] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.108535] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    1.108562] ehci-pci 0000:00:1a.0: debug port 2
[    1.112501] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.112512] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7428000
[    1.121539] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.121564] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.121565] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.121566] usb usb5: Product: EHCI Host Controller
[    1.121567] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.121568] usb usb5: SerialNumber: 0000:00:1a.0
[    1.121707] hub 5-0:1.0: USB hub found
[    1.121712] hub 5-0:1.0: 2 ports detected
[    1.121859] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.121862] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.121883] ehci-pci 0000:00:1d.0: debug port 2
[    1.125796] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.125807] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7427000
[    1.137630] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.137651] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    1.137653] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.137654] usb usb6: Product: EHCI Host Controller
[    1.137654] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.137655] usb usb6: SerialNumber: 0000:00:1d.0
[    1.137795] hub 6-0:1.0: USB hub found
[    1.137800] hub 6-0:1.0: 2 ports detected
[    1.137964] ahci 0000:00:1f.2: version 3.0
[    1.138095] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
[    1.138211] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
[    1.138214] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    1.152141] nouveau  [     DRM] allocated 2048x1152 fb: 0x80000, bo ffff880212cccc00
[    1.152232] fbcon: nouveaufb (fb0) is primary device
[    1.170121] scsi0 : ahci
[    1.170384] scsi1 : ahci
[    1.170600] scsi2 : ahci
[    1.170748] scsi3 : ahci
[    1.170926] scsi4 : ahci
[    1.171102] scsi5 : ahci
[    1.171130] ata1: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426100 irq 59
[    1.171132] ata2: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426180 irq 59
[    1.171132] ata3: DUMMY
[    1.171133] ata4: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426280 irq 59
[    1.171134] ata5: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426300 irq 59
[    1.171136] ata6: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426380 irq 59
[    1.171281] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.171283] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.171673] scsi6 : ahci
[    1.171806] scsi7 : ahci
[    1.171838] ata7: SATA max UDMA/133 abar m512@0xf7210000 port 0xf7210100 irq 19
[    1.171842] ata8: SATA max UDMA/133 abar m512@0xf7210000 port 0xf7210180 irq 19
[    1.390918] Console: switching to colour frame buffer device 256x72
[    1.392745] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    1.392746] nouveau 0000:01:00.0: registered panic notifier
[    1.417965] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[    1.433970] usb 5-1: new high-speed USB device number 2 using ehci-pci
[    1.490054] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.490101] ata2: SATA link down (SStatus 0 SControl 300)
[    1.490140] ata8: SATA link down (SStatus 0 SControl 300)
[    1.490155] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.490205] ata7: SATA link down (SStatus 0 SControl 300)
[    1.490218] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.490268] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.490395] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.490399] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021e057bf8), AE_NOT_FOUND (20140424/psparse-536)
[    1.490689] ata1.00: ATA-8: ST1000DM003-1CH162, CC43, max UDMA/133
[    1.490690] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.490951] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.490954] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021e057a18), AE_NOT_FOUND (20140424/psparse-536)
[    1.491065] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.491068] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021e057bf8), AE_NOT_FOUND (20140424/psparse-536)
[    1.491227] ata5.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
[    1.491228] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.491330] ata1.00: configured for UDMA/133
[    1.491457] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC43 PQ: 0 ANSI: 5
[    1.492078] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.492085] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021e057a18), AE_NOT_FOUND (20140424/psparse-536)
[    1.492371] ata5.00: configured for UDMA/133
[    1.492390] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.492393] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021e06e9a0), AE_NOT_FOUND (20140424/psparse-536)
[    1.492398] ata6.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[    1.493201] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.493207] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021e06e9a0), AE_NOT_FOUND (20140424/psparse-536)
[    1.493218] ata6.00: configured for UDMA/100
[    1.500041] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.500046] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021e057a90), AE_NOT_FOUND (20140424/psparse-536)
[    1.502279] ata4.00: ATA-8: OCZ-VERTEX2 3.5, 1.33, max UDMA/133
[    1.502283] ata4.00: 224674128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.510099] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.510107] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021e057a90), AE_NOT_FOUND (20140424/psparse-536)
[    1.513100] ata4.00: configured for UDMA/133
[    1.513252] scsi 3:0:0:0: Direct-Access     ATA      OCZ-VERTEX2 3.5  1.33 PQ: 0 ANSI: 5
[    1.513532] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5001AALS-0 3B01 PQ: 0 ANSI: 5
[    1.515970] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224BB  SB00 PQ: 0 ANSI: 5
[    1.524759] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.524761] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.524765] sd 3:0:0:0: [sdb] 224674128 512-byte logical blocks: (115 GB/107 GiB)
[    1.524812] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.524858] sd 0:0:0:0: [sda] Write Protect is off
[    1.524861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.524892] sd 3:0:0:0: [sdb] Write Protect is off
[    1.524893] sd 4:0:0:0: [sdc] Write Protect is off
[    1.524894] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.524896] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.524905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.524926] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.524930] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.525298]  sdb:
[    1.525456] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.529053]  sda: sda1 sda2 sda3
[    1.529253] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.532315]  sdc: sdc1 sdc2 sdc3
[    1.532510] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.536430] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.536431] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.536496] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.536875] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.536906] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.536934] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.536962] sr 5:0:0:0: Attached scsi generic sg3 type 5
[    1.566470] usb 5-1: New USB device found, idVendor=8087, idProduct=0024
[    1.566474] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.566758] hub 5-1:1.0: USB hub found
[    1.566838] hub 5-1:1.0: 6 ports detected
[    1.678501] usb 6-1: new high-speed USB device number 2 using ehci-pci
[    1.748038] device-mapper: uevent: version 1.0.3
[    1.748136] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.778493] tsc: Refined TSC clocksource calibration: 3500.024 MHz
[    1.811037] usb 6-1: New USB device found, idVendor=8087, idProduct=0024
[    1.811041] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.811444] hub 6-1:1.0: USB hub found
[    1.811638] hub 6-1:1.0: 8 ports detected
[    1.882767] usb 5-1.1: new high-speed USB device number 3 using ehci-pci
[    1.977327] usb 5-1.1: New USB device found, idVendor=058f, idProduct=6364
[    1.977332] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.977335] usb 5-1.1: Product: Mass Storage Device
[    1.977337] usb 5-1.1: Manufacturer: Generic
[    1.977339] usb 5-1.1: SerialNumber: 058F63646476
[    1.979046] hidraw: raw HID events driver (C) Jiri Kosina
[    1.979725] usb-storage 5-1.1:1.0: USB Mass Storage device detected
[    1.979932] scsi8 : usb-storage 5-1.1:1.0
[    1.980009] usbcore: registered new interface driver usb-storage
[    1.980903] usbcore: registered new interface driver usbhid
[    1.980905] usbhid: USB HID core driver
[    1.981679] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.1/input1
[    2.083193] usb 6-1.3: new low-speed USB device number 3 using ehci-pci
[    2.099178] random: nonblocking pool is initialized
[    2.180783] usb 6-1.3: New USB device found, idVendor=413c, idProduct=2107
[    2.180788] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.180790] usb 6-1.3: Product: Dell USB Entry Keyboard
[    2.180793] usb 6-1.3: Manufacturer: DELL
[    2.184001] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0/0003:413C:2107.0002/input/input4
[    2.184140] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.3/input0
[    2.255414] usb 6-1.4: new high-speed USB device number 4 using ehci-pci
[    2.347800] usb 6-1.4: New USB device found, idVendor=0424, idProduct=2512
[    2.347804] usb 6-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.348231] hub 6-1.4:1.0: USB hub found
[    2.348443] hub 6-1.4:1.0: 2 ports detected
[    2.619986] usb 6-1.4.1: new high-speed USB device number 5 using ehci-pci
[    2.718477] usb 6-1.4.1: New USB device found, idVendor=05a9, idProduct=2649
[    2.718482] usb 6-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.718484] usb 6-1.4.1: Product: Monitor Webcam
[    2.718487] usb 6-1.4.1: Manufacturer: OmniVision Technologies, Inc.538-2640-08.09.09.1
[    2.780213] Switched to clocksource tsc
[    2.804220] usb 6-1.4.2: new high-speed USB device number 6 using ehci-pci
[    2.896588] usb 6-1.4.2: New USB device found, idVendor=0424, idProduct=2514
[    2.896593] usb 6-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.896969] hub 6-1.4.2:1.0: USB hub found
[    2.897069] hub 6-1.4.2:1.0: 4 ports detected
[    2.981272] scsi 8:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    2.982018] scsi 8:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    2.982624] scsi 8:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    2.983367] scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    2.983855] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    2.984341] sd 8:0:0:1: Attached scsi generic sg5 type 0
[    2.984888] sd 8:0:0:2: Attached scsi generic sg6 type 0
[    2.985296] sd 8:0:0:3: Attached scsi generic sg7 type 0
[    3.016018] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[    3.017499] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[    3.018251] sd 8:0:0:1: [sde] Attached SCSI removable disk
[    3.018975] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[    3.168787] usb 6-1.4.2.1: new full-speed USB device number 7 using ehci-pci
[    3.263678] usb 6-1.4.2.1: New USB device found, idVendor=05f3, idProduct=0081
[    3.263692] usb 6-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.263694] usb 6-1.4.2.1: Product: Kinesis Keyboard Hub
[    3.263696] usb 6-1.4.2.1: Manufacturer: PI Engineering
[    3.264204] hub 6-1.4.2.1:1.0: USB hub found
[    3.264534] hub 6-1.4.2.1:1.0: 4 ports detected
[    3.353021] usb 6-1.4.2.2: new low-speed USB device number 8 using ehci-pci
[    3.467963] usb 6-1.4.2.2: New USB device found, idVendor=1a7c, idProduct=0068
[    3.467977] usb 6-1.4.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.467979] usb 6-1.4.2.2: Product: Evoluent VerticalMouse 3 
[    3.467981] usb 6-1.4.2.2: Manufacturer: Kingsis Peripherals 
[    3.472762] input: Kingsis Peripherals  Evoluent VerticalMouse 3  as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.4/6-1.4.2/6-1.4.2.2/6-1.4.2.2:1.0/0003:1A7C:0068.0003/input/input5
[    3.472937] hid-generic 0003:1A7C:0068.0003: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals  Evoluent VerticalMouse 3 ] on usb-0000:00:1d.0-1.4.2.2/input0
[    3.545425] usb 6-1.4.2.1.2: new full-speed USB device number 9 using ehci-pci
[    3.648995] usb 6-1.4.2.1.2: New USB device found, idVendor=05f3, idProduct=0007
[    3.649008] usb 6-1.4.2.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.652988] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.4/6-1.4.2/6-1.4.2.1/6-1.4.2.1.2/6-1.4.2.1.2:1.0/0003:05F3:0007.0004/input/input6
[    3.653069] hid-generic 0003:05F3:0007.0004: input,hidraw3: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1d.0-1.4.2.1.2/input0
[    3.664721] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.4/6-1.4.2/6-1.4.2.1/6-1.4.2.1.2/6-1.4.2.1.2:1.1/0003:05F3:0007.0005/input/input7
[    3.664807] hid-generic 0003:05F3:0007.0005: input,hidraw4: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1d.0-1.4.2.1.2/input1
[   25.134021] NET: Registered protocol family 38
[   25.243703] sha256_ssse3: Using AVX optimized SHA-256 implementation
[   25.381161] raid6: sse2x1    5041 MB/s
[   25.449249] raid6: sse2x2    8096 MB/s
[   25.517351] raid6: sse2x4   11333 MB/s
[   25.517352] raid6: using algorithm sse2x4 (11333 MB/s)
[   25.517353] raid6: using ssse3x2 recovery algorithm
[   25.517634] xor: automatically using best checksumming function:
[   25.557406]    avx       : 25744.000 MB/sec
[   25.559861] Btrfs loaded
[   25.866481] BTRFS: device label debian devid 1 transid 184959 /dev/mapper/vg0-debian
[   25.868170] PM: Starting manual resume from disk
[   25.868176] PM: Hibernation image partition 254:5 present
[   25.868177] PM: Looking for hibernation image.
[   25.868466] PM: Image not found (code -22)
[   25.868469] PM: Hibernation image not present or could not be loaded.
[   25.870516] BTRFS info (device dm-0): disk space caching is enabled
[   29.123988] systemd[1]: Cannot add dependency job for unit avahi-daemon.service, ignoring: Unit avahi-daemon.service failed to load: No such file or directory.
[   29.850852] lp: driver loaded but no devices found
[   29.887953] ppdev: user-space parallel port driver
[   30.002318] fuse init (API version 7.23)
[   30.051874] loop: module loaded
[   30.257755] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[   30.271966] systemd-udevd[395]: starting version 215
[   31.997154] BTRFS info (device dm-0): disk space caching is enabled
[   32.678875] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   33.057676] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   33.211161] parport0: PC-style at 0xc030, irq 19 [PCSPP,TRISTATE,EPP]
[   33.219225] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[   33.219231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.219235] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   33.219238] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258)
[   33.219241] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.219243] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   33.219245] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258)
[   33.219248] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.219249] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   33.219252] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPCB.GPBX) (20140424/utaddress-258)
[   33.219255] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.219256] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   33.304954] lp0: using parport0 (interrupt-driven).
[   33.305019] console [ttyS0] disabled
[   33.325675] 0000:07:01.0: ttyS0 at I/O 0xc050 (irq = 19, base_baud = 115200) is a 16550A
[   33.325696] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   33.325992] BUG: unable to handle kernel paging request at ffffffff819419bf
[   33.326284] IP: [<ffffffff819419bf>] serial8250_console_setup+0x0/0xaa
[   33.326574] PGD 1816067 PUD 1817063 PMD 213237063 PTE 8000000001941163
[   33.326867] Oops: 0011 [#1] SMP 
[   33.327154] Modules linked in: jbd2 lpc_ich parport_serial(+) snd_pcm pcspkr mei psmouse snd_timer mfd_core serio_raw snd soundcore evdev shpchp battery processor nct6775 hwmon_vid coretemp kvm_intel kvm loop fuse parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq sha256_ssse3 sha256_generic algif_skcipher af_alg hid_generic usbhid usb_storage hid dm_crypt dm_mod i915 sg sd_mod sr_mod crc_t10dif cdrom crct10dif_generic crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw nouveau gf128mul glue_helper ablk_helper cryptd ahci mxm_wmi libahci ehci_pci ttm i2c_algo_bit libata drm_kms_helper xhci_hcd ehci_hcd e1000e drm scsi_mod ptp usbcore pps_core i2c_core usb_common fan thermal video wmi thermal_sys button
[   33.328568] CPU: 0 PID: 457 Comm: systemd-udevd Not tainted 3.16.0-4-amd64 #1 Debian 3.16.7-2
[   33.328908] Hardware name: System manufacturer System Product Name/P8Z68-V GEN3, BIOS 3603 11/09/2012
[   33.329245] task: ffff880213536290 ti: ffff880212560000 task.ti: ffff880212560000
[   33.329587] RIP: 0010:[<ffffffff819419bf>]  [<ffffffff819419bf>] serial8250_console_setup+0x0/0xaa
[   33.329968] RSP: 0018:ffff880212563908  EFLAGS: 00010246
[   33.330374] RAX: 0000000000000000 RBX: ffffffff818a8080 RCX: 0000000000000000
[   33.330787] RDX: ffffffff819419bf RSI: ffff88021efa8f2f RDI: ffffffff818a8080
[   33.331206] RBP: ffffffff81a8c160 R08: 000000000000000a R09: 0000000000000000
[   33.331622] R10: 00000000000003d2 R11: ffff880212563676 R12: 0000000000000000
[   33.332045] R13: 0000000000000000 R14: ffff8802131b4110 R15: ffffffff818c9970
[   33.332470] FS:  00007f8f61b84880(0000) GS:ffff88021ec00000(0000) knlGS:0000000000000000
[   33.332895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   33.333323] CR2: ffffffff819419bf CR3: 00000002136ec000 CR4: 00000000000407f0
[   33.333754] Stack:
[   33.334181]  ffffffff810b78bb ffff8802131b4000 ffffffff81adad80 0000000000000246
[   33.334616]  ffffffff818a81e0 ffffffff8137e881 0000000000000013 ffff88020001c200
[   33.335057]  ffffffff817560ab 30637830204f2f49 0000000000003035 ffff88021325e400
[   33.335495] Call Trace:
[   33.335932]  [<ffffffff810b78bb>] ? register_console+0x10b/0x350
[   33.336364]  [<ffffffff8137e881>] ? uart_add_one_port+0x3e1/0x430
[   33.336793]  [<ffffffff810b7761>] ? unregister_console+0xb1/0x100
[   33.337227]  [<ffffffff81382903>] ? serial8250_register_8250_port+0x2a3/0x380
[   33.337660]  [<ffffffff8138823d>] ? pciserial_init_ports+0xfd/0x200
[   33.338099]  [<ffffffffa0724488>] ? parport_serial_pci_probe+0x308/0x3d7 [parport_serial]
[   33.338533]  [<ffffffff812dfedf>] ? local_pci_probe+0x3f/0xa0
[   33.338974]  [<ffffffff812e119a>] ? pci_device_probe+0xda/0x130
[   33.339414]  [<ffffffff8139f0cd>] ? driver_probe_device+0x9d/0x3d0
[   33.339848]  [<ffffffff8139f4cb>] ? __driver_attach+0x8b/0x90
[   33.340282]  [<ffffffff8139f440>] ? __device_attach+0x40/0x40
[   33.340714]  [<ffffffff8139d1db>] ? bus_for_each_dev+0x5b/0x90
[   33.341143]  [<ffffffff8139e760>] ? bus_add_driver+0x180/0x250
[   33.341575]  [<ffffffffa0729000>] ? 0xffffffffa0728fff
[   33.341999]  [<ffffffff8139fc1b>] ? driver_register+0x5b/0xe0
[   33.342430]  [<ffffffff8100213c>] ? do_one_initcall+0xcc/0x200
[   33.342862]  [<ffffffff810d8aaa>] ? load_module+0x20da/0x26b0
[   33.343288]  [<ffffffff810d46b0>] ? store_uevent+0x40/0x40
[   33.343714]  [<ffffffff810d91dd>] ? SyS_finit_module+0x7d/0xa0
[   33.344143]  [<ffffffff8150cc2d>] ? system_call_fast_compare_end+0x10/0x15
[   33.344566] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
[   33.345068] RIP  [<ffffffff819419bf>] serial8250_console_setup+0x0/0xaa
[   33.345501]  RSP <ffff880212563908>
[   33.345950] CR2: ffffffff819419bf
[   33.346402] ---[ end trace 470d2b295c91e407 ]---
[   33.347285] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[   33.347679] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   33.356426] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[   33.534274] intel_rapl: RAPL domain dram detection failed
[   33.622090] EXT4-fs (sdc1): recovery complete
[   33.638515] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   33.823319] asus_wmi: ASUS WMI generic driver loaded
[   33.848777] iTCO_vendor_support: vendor-support=0
[   33.855377] asus_wmi: Initialization: 0x0
[   33.855797] asus_wmi: BIOS WMI version: 0.9
[   33.856231] asus_wmi: SFUN value: 0x0
[   33.856941] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[   33.858602] asus_wmi: Disabling ACPI video driver
[   33.864489] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   33.864938] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   33.865405] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   33.878809] snd_hda_intel 0000:01:00.1: Disabling MSI
[   33.879188] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   33.879750] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[   34.119862] media: Linux media interface: v0.10
[   34.148482] Linux video capture interface: v2.00
[   34.162608] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   34.163004] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   34.163391] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   34.163773] sound hdaudioC0D0:    mono: mono_out=0x0
[   34.164152] sound hdaudioC0D0:    dig-out=0x11/0x1e
[   34.164529] sound hdaudioC0D0:    inputs:
[   34.164911] sound hdaudioC0D0:      Front Mic=0x19
[   34.165291] sound hdaudioC0D0:      Rear Mic=0x18
[   34.165680] sound hdaudioC0D0:      Line=0x1a
[   34.178038] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   34.178520] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   34.179383] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   34.179847] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   34.180278] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   34.180698] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   34.181123] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   34.181539] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   34.505051] usb 6-1.4.1: Warning! Unlikely big volume range (=34656), cval->res is probably wrong.
[   34.505425] usb 6-1.4.1: [3] FU [Mic Capture Volume] ch = 1, val = -32768/1888/1
[   34.506049] usbcore: registered new interface driver snd-usb-audio
[   34.546108] uvcvideo: Found UVC 1.00 device Monitor Webcam (05a9:2649)
[   34.546861] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[   34.547981] input: Monitor Webcam as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.4/6-1.4.1/6-1.4.1:1.0/input/input19
[   34.548389] usbcore: registered new interface driver uvcvideo
[   34.548731] USB Video Class driver (1.1.1)
[   34.703709] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   34.704516] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   34.704934] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[   34.705422] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[   35.486024] Adding 4192252k swap on /dev/mapper/vg0-swap_crypt.  Priority:-1 extents:1 across:4192252k FS
[   35.924660] BTRFS: device fsid 8742472d-a9b0-4ab6-b67a-5d21f14f7a38 devid 1 transid 184020 /dev/dm-6
[   36.061627] BTRFS info (device dm-6): disk space caching is enabled
[   39.495287] systemd-journald[377]: Received request to flush runtime journal from PID 1
[   40.477499] systemd-journald[377]: File /var/log/journal/b865c77cc176b5ef3b69390a0000000d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   42.108670] Bridge firewalling registered
[   42.112367] device eth0 entered promiscuous mode
[   42.270809] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   42.374218] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   42.374687] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   42.382108] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[   43.897515] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   43.897922] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[   43.898348] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   43.898770] br0: port 1(eth0) entered forwarding state
[   43.900902] br0: port 1(eth0) entered forwarding state
[   43.903010] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   58.950488] br0: port 1(eth0) entered forwarding state
[   61.854018] systemd-journald[377]: File /var/log/journal/b865c77cc176b5ef3b69390a0000000d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   62.399907] tun: Universal TUN/TAP device driver, 1.6
[   62.399912] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

Reply to: