--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.9-1-686-pae: hda-intel 0000:00:1b.0: azx_get_response timeout
- From: Stéphane Aulery <lkppo@free.fr>
- Date: Wed, 26 Jun 2013 23:26:44 +0200
- Message-id: <20130626212644.10551.59938.reportbug@isidore>
Package: src:linux
Version: 3.9.6-1
Severity: normal
Dear Maintainer,
I went from a kernel linux-image-3.2.0-4-686-pae to kernel
linux-image-3.9-1-686-pae. Since the X display is shifted upwards and
reveals a piece of the linux console at the bottom of screen.
These three lines from the dmesg may have a bearing on the problem :
[ 54.972133] hda-intel 0000:00:1b.0: azx_get_response timeout,
switching to polling mode: last cmd=0x106a0000
[ 56.004116] hda_intel: azx_get_response timeout, switching to
single_cmd mode: last cmd=0x106a0000
[ 56.073605] hda-intel: Invalid position buffer, using LPIB read
method instead.
I can not attach a screenshot, because utility capture buffer X server
but are not offset on the screen.
Regards,
-- Package-specific info:
** Version:
Linux version 3.9-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
** Not tainted
** Kernel log:
[ 22.140843] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 22.142454] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 22.144125] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 22.145807] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 26.673971] Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
[ 29.070351] EXT3-fs (sda1): using internal journal
[ 29.671240] device-mapper: uevent: version 1.0.3
[ 29.698741] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 30.291837] fuse init (API version 7.21)
[ 30.428813] loop: module loaded
[ 34.893524] r8169 0000:01:00.0 eth0: link down
[ 34.893563] r8169 0000:01:00.0 eth0: link down
[ 34.956480] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.596713] r8169 0000:01:00.0 eth0: link up
[ 36.652893] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.972133] hda-intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x106a0000
[ 56.004116] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x106a0000
[ 56.073605] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 174.823437] [drm:psb_intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 174.831875] [drm:psb_intel_sdvo_read_response], SDVOB: R: (Success)
[ 174.832681] [drm:asle_set_backlight], asle set backlight 800000ff
[ 174.833006] [drm:asle_set_backlight], asle set backlight 800000ff
[ 177.207573] [drm:psb_intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[ 177.215072] [drm:psb_intel_sdvo_read_response], SDVOB: R: (Success) 01
[ 177.215087] [drm:psb_intel_sdvo_debug_write], SDVOB: W: 05 02 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 177.223310] [drm:psb_intel_sdvo_read_response], SDVOB: R: (Success)
[ 177.223702] [drm:asle_set_backlight], asle set backlight 800000ff
[ 177.224024] [drm:asle_set_backlight], asle set backlight 800000ff
[ 197.804463] [drm:asle_set_backlight], asle set backlight 800000ff
[ 197.804773] [drm:asle_set_backlight], asle set backlight 800000ff
[ 362.511756] [drm:drm_crtc_helper_set_config],
[ 362.511765] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 362.511795] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 362.511801] [drm:drm_crtc_helper_set_config],
[ 362.511805] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 391.018502] [drm:asle_set_backlight], asle set backlight 800000ff
[ 391.019011] [drm:asle_set_backlight], asle set backlight 800000ff
[ 454.224707] [drm:drm_crtc_helper_set_config],
[ 454.224718] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 454.224762] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 454.224770] [drm:drm_crtc_helper_set_config],
[ 454.224776] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 458.668746] [drm:asle_set_backlight], asle set backlight 800000ff
[ 458.669146] [drm:asle_set_backlight], asle set backlight 800000ff
[ 551.741760] [drm:drm_crtc_helper_set_config],
[ 551.741769] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 551.741800] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 551.741806] [drm:drm_crtc_helper_set_config],
[ 551.741810] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 586.299937] [drm:asle_set_backlight], asle set backlight 800000ff
[ 586.300518] [drm:asle_set_backlight], asle set backlight 800000ff
[ 739.421786] [drm:drm_crtc_helper_set_config],
[ 739.421796] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 739.421836] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 739.421842] [drm:drm_crtc_helper_set_config],
[ 739.421846] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 743.950619] [drm:asle_set_backlight], asle set backlight 800000ff
[ 743.951005] [drm:asle_set_backlight], asle set backlight 800000ff
[ 804.338830] [drm:drm_crtc_helper_set_config],
[ 804.338839] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 804.338872] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 804.338878] [drm:drm_crtc_helper_set_config],
[ 804.338883] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 806.715698] [drm:asle_set_backlight], asle set backlight 800000ff
[ 806.716282] [drm:asle_set_backlight], asle set backlight 800000ff
[ 942.663050] [drm:drm_crtc_helper_set_config],
[ 942.663059] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 942.663090] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 942.663096] [drm:drm_crtc_helper_set_config],
[ 942.663101] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1005.332982] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1005.333817] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1025.155277] [drm:drm_crtc_helper_set_config],
[ 1025.155293] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 1025.155344] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 1025.155354] [drm:drm_crtc_helper_set_config],
[ 1025.155362] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1027.092963] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1027.093486] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1054.952562] [drm:drm_crtc_helper_set_config],
[ 1054.952582] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 1054.952651] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 1054.952662] [drm:drm_crtc_helper_set_config],
[ 1054.952670] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1059.869125] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1059.869873] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1339.572899] [drm:drm_crtc_helper_set_config],
[ 1339.572908] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 1339.572941] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 1339.572964] [drm:drm_crtc_helper_set_config],
[ 1339.572969] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1343.492955] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1343.493785] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1536.719272] [drm:drm_crtc_helper_set_config],
[ 1536.719294] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:56] #connectors=1 (x y) (0 0)
[ 1536.719387] [drm:drm_crtc_helper_set_config], [CONNECTOR:42:VGA-1] to [CRTC:3]
[ 1536.719403] [drm:drm_crtc_helper_set_config],
[ 1536.719414] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1547.422607] [drm:asle_set_backlight], asle set backlight 800000ff
[ 1547.422915] [drm:asle_set_backlight], asle set backlight 800000ff
** Model information
not available
** Loaded modules:
snd_hrtimer
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
binfmt_misc
loop
fuse
dm_crypt
dm_mod
snd_hda_codec_realtek
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
coretemp
snd_rawmidi
kvm_intel
snd_seq
rt2800usb
rt2x00usb
rt2800lib
gma500_gfx
rt2x00lib
drm_kms_helper
kvm
mac80211
drm
snd_seq_device
snd_timer
snd
cfg80211
acpi_cpufreq
i2c_isch
rfkill
crc_ccitt
soundcore
psmouse
mperf
serio_raw
i2c_algo_bit
i2c_core
microcode
pcspkr
lpc_sch
mfd_core
joydev
evdev
processor
video
button
thermal_sys
ext3
mbcache
jbd
sg
sd_mod
crc_t10dif
ata_generic
hid_generic
usbhid
hid
sata_sil24
pata_sch
uhci_hcd
ehci_pci
ehci_hcd
libata
r8169
usbcore
scsi_mod
usb_common
mii
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 192.168.0.4
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
dns-nameservers 212.27.54.252
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:50:c2:20:2d:f1 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.4/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::250:c2ff:fe20:2df1/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:08:10:72:9e:85 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 594266 1939 0 0 0 0 0 0 594266 1939 0 0 0 0 0 0
eth0: 28163032 19807 0 0 0 0 0 0 1023109 12217 0 0 0 0 0 0
*** Protocol statistics:
Ip:
19751 total packets received
0 forwarded
0 incoming packets discarded
19751 incoming packets delivered
12200 requests sent out
Icmp:
10 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 10
10 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 10
IcmpMsg:
InType3: 10
OutType3: 10
Tcp:
147 active connections openings
1 passive connection openings
2 failed connection attempts
9 connection resets received
7 connections established
21405 segments received
13851 segments send out
3 segments retransmited
6 bad segments received.
11 resets sent
Udp:
243 packets received
10 packets to unknown port received.
0 packet receive errors
253 packets sent
UdpLite:
TcpExt:
37 TCP sockets finished time wait in fast timer
170 delayed acks sent
Quick ack mode was activated 1 times
315 packets directly queued to recvmsg prequeue.
122 bytes directly in process context from backlog
300207 bytes directly received in process context from prequeue
18055 packet headers predicted
315 packets header predicted and directly queued to user
277 acknowledgments not containing data payload received
1220 predicted acknowledgments
3 congestion windows recovered without slow start after partial ack
3 other TCP timeouts
1 DSACKs sent for old packets
9 connections reset due to early user close
TCPRcvCoalesce: 3452
TCPOFOQueue: 971
TCPChallengeACK: 6
TCPSYNChallenge: 6
IpExt:
InOctets: 27884158
OutOctets: 853003
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH Poulsbo) [8086:8100] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe980000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at c880 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Region 3: Memory at fe940000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe938000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: cff00000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 80000000-801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe937c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: pata_sch
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at dd00 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at cfff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller [1095:3132] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller [1095:3132]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febffc00 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Region 4: I/O ports at e880 [size=128]
Expansion ROM at feb00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil24
** USB devices:
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 1e54:2030 TypeMatrix 2030 USB Keyboard
Bus 002 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (650, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.9-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-3
Versions of packages linux-image-3.9-1-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27+deb7u1
ii linux-doc-3.9 3.9.6-1
Versions of packages linux-image-3.9-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.38
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-686-pae/prerm/removing-running-kernel-3.9-1-686-pae: true
linux-image-3.9-1-686-pae/postinst/missing-firmware-3.9-1-686-pae:
linux-image-3.9-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.9-1-686-pae/postinst/depmod-error-initrd-3.9-1-686-pae: false
--- End Message ---