[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#762921: marked as done (linux-image-3.17-rc5-amd64: Kernel netfilter modules lack NAT support)



Your message dated Fri, 17 Oct 2014 15:09:14 +0100
with message-id <20141017140914.GB5094@decadent.org.uk>
and subject line CONFIG_IP_NF_NAT has been enabled
has caused the Debian Bug report #762458,
regarding linux-image-3.17-rc5-amd64: Kernel netfilter modules lack NAT support
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
762458: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762458
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.17~rc5-1~exp1
Severity: important

Dear Maintainer,

This kernel does not have IP NAT support configured, making it useles for
most home router setups.

# iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables v1.4.21: can't initialize iptables table `nat': Table does not exist

# grep CONFIG_IP_NF_NAT /boot/config-3.17-rc5-amd64
# CONFIG_IP_NF_NAT is not set

   This enables the `nat' table in iptables. This allows masquerading,
   port forwarding and other forms of full Network Address Port
   Translation.

It seems that the required .config options for NAT have shifted around
recently in the kernel.

-- Package-specific info:
** Version:
Linux version 3.17-rc5-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.17~rc5-1~exp1 (2014-09-18)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.17-rc5-amd64 root=UUID=cb97baf6-acb1-4535-b2d8-dc9d3eb47f64 ro quiet

** Not tainted

** Kernel log:
[    2.943586] usb 3-10: reset high-speed USB device number 5 using xhci_hcd
[    2.943634] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 5.
[    2.943635] usb 3-10: hub failed to enable device, error -22
[    2.948205]  sdb: sdb1
[    2.959479] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.055551] usb 3-10: reset high-speed USB device number 5 using xhci_hcd
[    3.071949] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880214bb7300
[    3.071950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880214bb7348
[    3.071951] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880214bb7390
[    3.075607] r8152 3-10:1.0 eth1: v1.06.0 (2014/03/03)
[    3.075677] usbcore: registered new interface driver r8152
[    3.078218] usbcore: registered new interface driver cdc_ether
[    3.081795] random: nonblocking pool is initialized
[    3.143784] usb 3-9.2: new full-speed USB device number 7 using xhci_hcd
[    3.231717] Console: switching to colour frame buffer device 240x67
[    3.235252] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.235253] i915 0000:00:02.0: registered panic notifier
[    3.243430] usb 3-9.2: New USB device found, idVendor=05f3, idProduct=0007
[    3.243433] usb 3-9.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.247368] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/0003:05F3:0007.0002/input/input8
[    3.247421] hid-generic 0003:05F3:0007.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:14.0-9.2/input0
[    3.253294] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.1/0003:05F3:0007.0003/input/input9
[    3.253348] hid-generic 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:14.0-9.2/input1
[    3.261173] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.261232] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.261282] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[    3.261306] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    3.261396] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.261722] snd_hda_intel 0000:00:03.0: irq 31 for MSI/MSI-X
[    3.261772] snd_hda_intel 0000:00:1b.0: irq 32 for MSI/MSI-X
[    3.274888] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.274891] sound hdaudioC1D0:    speaker_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[    3.274892] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.274893] sound hdaudioC1D0:    mono: mono_out=0x0
[    3.274894] sound hdaudioC1D0:    inputs:
[    3.274895] sound hdaudioC1D0:      Rear Mic=0x18
[    3.274896] sound hdaudioC1D0:      Front Mic=0x19
[    3.274898] sound hdaudioC1D0:      Internal Mic=0x12
[    3.282002] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    3.282077] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    3.282284] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    3.282350] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    3.282417] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    3.282483] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    3.467962] usb 3-9.3: new full-speed USB device number 8 using xhci_hcd
[    3.535093] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    3.538379] systemd-journald[160]: Received request to flush runtime journal from PID 1
[    3.558009] usb 3-9.3: New USB device found, idVendor=046d, idProduct=c52b
[    3.558013] usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.558015] usb 3-9.3: Product: USB Receiver
[    3.558016] usb 3-9.3: Manufacturer: Logitech
[    3.571886] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9.3/input2
[    3.630167] input: Logitech Unifying Device. Wireless PID:2006 as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input17
[    3.630253] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2006] on usb-0000:00:14.0-9.3:1
[    3.654540] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[    3.693803] r8169 0000:03:00.0 eth0: link down
[    3.693827] r8169 0000:03:00.0 eth0: link down
[    3.693833] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.741946] r8169 0000:03:00.0 eth0: link up
[    6.741960] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.139410] iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
[   12.146394] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[   12.419250] iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
[   12.426220] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[   12.517413] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.685992] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   14.959946] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.961736] iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
[   14.968707] iwlwifi 0000:04:00.0: Radio type=0x2-0x1-0x0
[   15.017405] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   15.054697] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.080842] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.080845] Bluetooth: BNEP filters: protocol multicast
[   15.080854] Bluetooth: BNEP socket layer initialized
[   15.174867] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   15.555538] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  197.526323] Netfilter messages via NETLINK v0.30.
[  203.372920] device eth1 entered promiscuous mode
[  203.373067] r8152 3-10:1.0 eth1: Promiscuous mode enabled
[  384.561415] device eth0 entered promiscuous mode
[ 1866.425584] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 2210.436244] ctnetlink v0.93: registering with nfnetlink.
[ 4656.559893] device-mapper: uevent: version 1.0.3
[ 4656.559951] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4658.683959] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 4658.685465] JFS: nTxBlock = 8192, nTxLock = 65536
[ 4658.693538] ntfs: driver 2.1.30 [Flags: R/W MODULE].
[ 4658.705722] QNX4 filesystem 0.2.3 registered.
[ 4658.774111] raid6: sse2x1    9124 MB/s
[ 4658.842129] raid6: sse2x2   11361 MB/s
[ 4658.910139] raid6: sse2x4   10642 MB/s
[ 4658.978155] raid6: avx2x1   17885 MB/s
[ 4659.046169] raid6: avx2x2   20489 MB/s
[ 4659.114187] raid6: avx2x4   23703 MB/s
[ 4659.114189] raid6: using algorithm avx2x4 (23703 MB/s)
[ 4659.114190] raid6: using avx2x2 recovery algorithm
[ 4659.114490] xor: automatically using best checksumming function:
[ 4659.154192]    avx       : 28847.000 MB/sec
[ 4659.156507] Btrfs loaded
[ 5460.724830] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0210
board_vendor: ASUSTeK COMPUTER INC.
board_name: H81T
board_version: Rev X.0x

** Loaded modules:
btrfs
xor
raid6_pq
ufs
qnx4
hfsplus
hfs
minix
ntfs
msdos
jfs
xfs
libcrc32c
dm_mod
cpuid
nf_conntrack_netlink
nft_chain_nat_ipv4
nf_nat_ipv4
nft_nat
nf_tables
nf_nat
nf_conntrack_ftp
nfnetlink_queue
nfnetlink_log
nfnetlink
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
binfmt_misc
bnep
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
ipt_REJECT
iptable_mangle
iptable_filter
ip_tables
x_tables
hid_logitech_dj
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
cdc_ether
usbnet
joydev
hid_generic
usbhid
hid
ecb
btusb
r8152
bluetooth
nls_utf8
nls_cp437
vfat
fat
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
arc4
usb_storage
kvm
iwldvm
crc32_pclmul
ghash_clmulni_intel
mac80211
eeepc_wmi
asus_wmi
iTCO_wdt
aesni_intel
sparse_keymap
iTCO_vendor_support
evdev
aes_x86_64
lrw
gf128mul
iwlwifi
glue_helper
ablk_helper
snd_hda_intel
cryptd
snd_hda_controller
i915
efi_pstore
snd_hda_codec
psmouse
cfg80211
efivars
pcspkr
serio_raw
rfkill
drm_kms_helper
wmi
snd_hwdep
tpm_infineon
drm
tpm_tis
snd_pcm
battery
tpm
snd_timer
i2c_i801
mei_me
lpc_ich
mei
i2c_algo_bit
mfd_core
snd
i2ccore
shpchp
soundcore
video
button
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
xhci_hcd
crct10dif_pclmul
crct10dif_common
ahci
crc32c_intel
ehci_pci
libahci
ehci_hcd
libata
scsi_mod
r8169
mii
usbcore
usb_common
thermal
fan
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: hsw_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Generation Core Processor Family Integrated Graphics Controller [8086:041e] (rev 06) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:85c8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: df200000-df3fffff
	Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f7d00000-f7dfffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: f7c00000-f7cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation C220 Series Chipset Family H81 Express LPC Controller [8086:8c5c] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 26
	Region 0: I/O ports at f0b0 [size=8]
	Region 1: I/O ports at f0a0 [size=4]
	Region 2: I/O ports at f090 [size=8]
	Region 3: I/O ports at f080 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8554]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	Region 0: I/O ports at e000 [size=256]
	Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

04:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
	Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi


** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0480:a00d Toshiba America Info. Systems, Inc. 
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 008: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 007: ID 05f3:0007 PI Engineering, Inc. Kinesis Advantage PRO MPC/USB Keyboard
Bus 003 Device 004: ID 05f3:0081 PI Engineering, Inc. Kinesis Integrated Hub
Bus 003 Device 003: ID 8087:07da Intel Corp. 
Bus 003 Device 006: ID 045e:077d Microsoft Corp. 
Bus 003 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 003 Device 005: ID 0bda:8152 Realtek Semiconductor Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (800, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.17-rc5-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_CH.utf8, LC_CTYPE=de_CH.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.17-rc5-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.117
ii  kmod                                    18-2
ii  linux-base                              3.5
ii  module-init-tools                       18-2

Versions of packages linux-image-3.17-rc5-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.17-rc5-amd64 suggests:
pn  debian-kernel-handbook     <none>
pn  grub-pc | extlinux | lilo  <none>
pn  linux-doc-3.17             <none>

Versions of packages linux-image-3.17-rc5-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.43
pn  firmware-libertas       <none>
ii  firmware-linux          0.43
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.43
pn  xen-hypervisor          <none>

-- debconf information excluded

--- End Message ---
--- Begin Message ---
Version: 3.17-1~exp1

In Linux 3.17, CONFIG_NF_NAT_IPV4 was renamed to CONFIG_IP_NF_NAT.
The new config option was enabled in the above Debian version.

Ben.

-- 
Ben Hutchings
Humour is the best antidote to reality.

--- End Message ---

Reply to: