Bug#765685: linux-image-3.16-2-amd64: Kernel lockups with r8723au
Package: src:linux
Version: 3.16.3-2
Severity: serious
The staging driver r8723au is enabled in the kernel but there appear to
be very good reasons why it's in staging - when it loads it routinely
locks up my system (hard with no output unfortunately). It seems to
make sense to disable the driver.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=1c8b372e-5478-46fe-84d9-efc496b4a0ce ro init=/bin/systemd quiet
** Tainted: WC (1536)
* Taint on warning.
* Module from drivers/staging has been loaded.
** Kernel log:
[ 557.489458] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 557.489463] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 557.494527] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 557.494530] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 558.501325] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 558.501338] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 558.506380] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 558.506383] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 559.515171] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 559.515183] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 559.520204] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 559.520206] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 560.527936] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 560.527939] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 560.532991] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 560.532994] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 561.543521] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 561.543525] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 561.548556] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 561.548560] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 562.557183] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 562.557188] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 562.562215] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 562.562220] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 563.571309] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 563.571314] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 563.576374] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 563.576377] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 564.585412] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 564.585424] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 564.590447] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 564.590450] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 565.599700] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 565.599703] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 565.604736] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 565.604740] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 566.613028] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 566.613033] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 566.618109] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 566.618116] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 567.627585] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 567.627588] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 567.632636] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 567.632640] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 568.640977] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 568.640981] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 568.646030] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 568.646034] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 569.656338] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 569.656348] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 569.661391] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 569.661394] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 570.668627] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 570.668637] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 570.673683] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 570.673686] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 571.679980] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 571.679985] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 571.685026] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 571.685030] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 572.693314] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 572.693318] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 572.698414] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 572.698418] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 573.705763] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 573.705776] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 573.710814] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 573.710817] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 574.719102] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 574.719106] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 574.724179] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 574.724190] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 575.731513] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 575.731518] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 575.736599] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 575.736603] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 576.744008] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 576.744015] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 576.749073] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 576.749076] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 577.757298] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 577.757302] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 577.762340] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 577.762344] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 578.771969] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 578.771974] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 578.777026] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 578.777030] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 579.787088] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 579.787092] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 579.792170] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 579.792173] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 580.813666] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 580.813670] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 580.818745] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 580.818747] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 581.829259] atkbd serio0: Unknown key pressed (translated set 2, code 0xbe on isa0060/serio0).
[ 581.829263] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
[ 581.834343] atkbd serio0: Unknown key released (translated set 2, code 0xbe on isa0060/serio0).
[ 581.834347] atkbd serio0: Use 'setkeycodes e03e <keycode>' to make it known.
** Model information
sys_vendor: LENOVO
product_name: 2191
product_version: Lenovo IdeaPad Yoga 13
chassis_vendor: LENOVO
chassis_version: Lenovo IdeaPad Yoga 13
bios_vendor: LENOVO
bios_version: 66CN55WW
board_vendor: LENOVO
board_name: INVALID
board_version: 31900003WIN8 STD MLT
** Loaded modules:
ctr
ccm
binfmt_misc
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
mac80211
rtsx_usb_ms
memstick
crc_ccitt
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
nls_utf8
nls_cp437
hid_sensor_gyro_3d
hid_sensor_accel_3d
hid_sensor_magn_3d
hid_sensor_incl_3d
hid_sensor_rotation
hid_sensor_trigger
industrialio_triggered_buffer
kfifo_buf
hid_sensor_iio_common
vfat
industrialio
fat
joydev
iTCO_wdt
uvcvideo
iTCO_vendor_support
videobuf2_vmalloc
r8723au(C)
videobuf2_memops
videobuf2_core
v4l2_common
x86_pkg_temp_thermal
videodev
intel_powerclamp
cfg80211
intel_rapl
coretemp
media
kvm_intel
kvm
hid_multitouch
hid_sensor_hub
crc32_pclmul
ghash_clmulni_intel
snd_hda_codec_hdmi
snd_hda_codec_conexant
aesni_intel
aes_x86_64
snd_hda_codec_generic
i915
lrw
gf128mul
snd_hda_intel
glue_helper
ablk_helper
snd_hda_controller
cryptd
snd_hda_codec
efi_pstore
snd_hwdep
drm_kms_helper
snd_pcm
psmouse
ideapad_laptop
snd_timer
evdev
drm
pcspkr
sparse_keymap
efivars
snd
serio_raw
mei_me
i2c_i801
soundcore
rfkill
i2c_algo_bit
mei
lpc_ich
wmi
i2c_core
battery
video
processor
button
ac
loop
fuse
autofs4
rtsx_usb_sdmmc
mmc_core
rtsx_usb
mfd_core
hid_generic
usbhid
hid
ext4
crc16
mbcache
jbd2
btrfs
xor
raid6_pq
sg
sd_mod
crc_t10dif
crct10dif_generic
ahci
libahci
xhci_hcd
crct10dif_pclmul
crct10dif_common
crc32c_intel
ehci_pci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:3977]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core Processor Thermal Subsystem [8086:0153] (rev 09)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at cfa08000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e041c000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0421000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e0418000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:3977]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 2094 [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 2090 [size=4]
Region 4: I/O ports at 2060 [size=32]
Region 5: Memory at e041f000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at e041d000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2040 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller [8086:1e24] (rev 04)
Subsystem: Lenovo Device [17aa:3977]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: Memory at e041e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
** USB devices:
Bus 002 Device 004: ID 5986:029c Acer, Inc
Bus 002 Device 003: ID 2047:0855 Texas Instruments
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 04f3:000a Elan Microelectronics Corp.
Bus 001 Device 005: ID 0bda:1724 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 007: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 1050:0111 Yubico.com
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.118
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.43
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
Reply to: