[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#765363: linux-image-3.16-0.bpo.2-amd64: second node fails to join cluster and mount ocfs2 partition



Package: src:linux
Version: 3.16.3-2~bpo70+1
Severity: important

Dear Maintainer,

Package linux-image-amd64 from wheezy-backports was upgraded,
resulting in installing linux-image-3.16-0.bpo.2-amd64 version
3.16.3-2~bpo70+1 . Previous kernel was linux-image-3.14-0.bpo.2-amd64
version 3.14.15-2~bpo70+1 .

We have several hosts that are part of an ocfs2 cluster. These hosts
mount a shared ocfs2 filesystem over iscsi/multipath.

The second node that tries to mount an ocfs2 partition fails with the
following messages in dmesg:

[  394.938173] o2net: Connected to node zotac (num 0) at 10.247.9.96:7777
[  401.151541] o2net: Connection to node zotac (num 0) at 10.247.9.96:7777 shutdown, state 8
[  401.156642] o2net: Connection to node zotac (num 0) at 10.247.9.96:7777 shutdown, state 7
[  401.161717] o2net: No longer connected to node zotac (num 0) at 10.247.9.96:7777
[  401.166848] (mount.ocfs2,3573,1):dlm_send_nodeinfo:1294 ERROR: node mismatch -112, node 0
[  401.171475] (mount.ocfs2,3573,1):dlm_try_to_join_domain:1681 ERROR: status = -112
[  401.176085] (mount.ocfs2,3573,1):dlm_send_one_join_cancel:1399 ERROR: Error -107 when sending message 512 (key 0x666c6172) to node 0
[  401.180308] (mount.ocfs2,3573,1):dlm_send_join_cancels:1433 ERROR: Error return -107 cancelling join on node 0
[  401.184557] (mount.ocfs2,3573,1):dlm_send_join_cancels:1440 ERROR: status = -107
[  401.188783] (mount.ocfs2,3573,1):dlm_try_to_join_domain:1718 ERROR: status = -107
[  401.192638] (mount.ocfs2,3573,1):dlm_join_domain:1951 ERROR: status = -112
[  401.196597] (mount.ocfs2,3573,0):dlm_register_domain:2209 ERROR: status = -112
[  401.200821] (mount.ocfs2,3573,0):o2cb_cluster_connect:368 ERROR: status = -112
[  401.204571] (mount.ocfs2,3573,0):ocfs2_dlm_init:3001 ERROR: status = -112
[  401.208339] (mount.ocfs2,3573,1):ocfs2_mount_volume:1860 ERROR: status = -112
[  401.212110] ocfs2: Unmounting device (254,0) on (node 0)
[  401.215811] (mount.ocfs2,3573,1):ocfs2_fill_super:1234 ERROR: status = -112

Kernel version 3.14 from backports has no problem mounting ocfs2
filesystems.

I have tried compiling a kernel from upstream (using the config from
the 3.16 package) with the following result:
3.15.10 is ok
3.16.0 is ok
3.16.2 is ok
3.16.3 is ok
3.16.5 is ok
3.17 fails to mount

-- Package-specific info:
** Version:
Linux version 3.16-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.3-2~bpo70+1 (2014-09-21)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.2-amd64 root=UUID=462497b3-37bd-48de-9032-21946b5f6ea3 ro transparent_hugepage=always elevator=deadline

** Not tainted

** Kernel log:
[    3.923864] usb 2-1.1.4: New USB device found, idVendor=0430, idProduct=00a2
[    3.923929] usb 2-1.1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.923986] usb 2-1.1.4: Product: Sun USB Keyboard
[    3.952944] Adding 5874684k swap on /dev/sda5.  Priority:-1 extents:1 across:5874684k SSFS
[    4.032812] device-mapper: multipath: version 1.7.0 loaded
[    4.055175] loop: module loaded
[    4.124380] usb 2-1.1.2: new full-speed USB device number 6 using ehci-pci
[    4.221818] usb 2-1.1.2: New USB device found, idVendor=076b, idProduct=3021
[    4.221886] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.221944] usb 2-1.1.2: Product: Smart Card Reader USB
[    4.221986] usb 2-1.1.2: Manufacturer: OMNIKEY AG
[    4.235370] hidraw: raw HID events driver (C) Jiri Kosina
[    4.241544] usbcore: registered new interface driver usbhid
[    4.241600] usbhid: USB HID core driver
[    4.245707] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/0003:0566:4006.0001/input/input6
[    4.245997] hid-generic 0003:0566:4006.0001: input,hidraw0: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.0-1.1.3/input0
[    4.246344] input: Sun USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/0003:0430:00A2.0002/input/input7
[    4.246568] hid-generic 0003:0430:00A2.0002: input,hidraw1: USB HID v1.10 Keyboard [Sun USB Keyboard] on usb-0000:00:1d.0-1.1.4/input0
[    4.731698] random: nonblocking pool is initialized
[    4.828369] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    5.011911] ocfs2: Registered cluster interface o2cb
[    5.029420] OCFS2 User DLM kernel interface loaded
[    5.045546] o2net: Error -99 while binding socket at 10.247.9.97:7777
[    5.355578] Loading iSCSI transport class v2.0-870.
[    5.364140] iscsi: registered transport (tcp)
[    5.383780] iscsi: registered transport (iser)
[    5.592223] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[    5.696001] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[    5.696167] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.723914] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.776325] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.811302] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.568693] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[    8.568741] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   25.587017] scsi6 : iSCSI Initiator over TCP/IP
[   25.848703] scsi 6:0:0:0: Enclosure         HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[   25.850952] scsi 6:0:0:0: Attached scsi generic sg1 type 13
[   25.854237] scsi 6:0:0:1: Direct-Access     HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[   25.856904] sd 6:0:0:1: Attached scsi generic sg2 type 0
[   25.858937] sd 6:0:0:1: [sdb] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[   25.861961] ses 6:0:0:0: Attached Enclosure device
[   25.862231] sd 6:0:0:1: [sdb] Write Protect is off
[   25.862285] sd 6:0:0:1: [sdb] Mode Sense: d7 00 00 08
[   25.865741] sd 6:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.874042]  sdb: unknown partition table
[   25.877538] sd 6:0:0:1: [sdb] Attached SCSI disk
[   25.966257] device-mapper: multipath round-robin: version 1.0.0 loaded
[  370.333199] scsi7 : iSCSI Initiator over TCP/IP
[  370.594247] scsi 7:0:0:0: Enclosure         HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[  370.596019] ses 7:0:0:0: Attached Enclosure device
[  370.596239] ses 7:0:0:0: Attached scsi generic sg3 type 13
[  370.599229] scsi 7:0:0:1: Direct-Access     HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[  370.602162] sd 7:0:0:1: Attached scsi generic sg4 type 0
[  370.604909] sd 7:0:0:1: [sdc] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[  370.607731] sd 7:0:0:1: [sdc] Write Protect is off
[  370.607799] sd 7:0:0:1: [sdc] Mode Sense: d7 00 00 08
[  370.608626] sd 7:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  370.615499]  sdc: unknown partition table
[  370.618869] sd 7:0:0:1: [sdc] Attached SCSI disk
[  375.702595] scsi8 : iSCSI Initiator over TCP/IP
[  375.963836] scsi 8:0:0:0: Enclosure         HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[  375.965765] ses 8:0:0:0: Attached Enclosure device
[  375.965989] ses 8:0:0:0: Attached scsi generic sg5 type 13
[  375.968904] scsi 8:0:0:1: Direct-Access     HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[  375.971565] sd 8:0:0:1: Attached scsi generic sg6 type 0
[  375.974948] sd 8:0:0:1: [sdd] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[  375.977061] sd 8:0:0:1: [sdd] Write Protect is off
[  375.977119] sd 8:0:0:1: [sdd] Mode Sense: d7 00 00 08
[  375.977895] sd 8:0:0:1: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  375.984932]  sdd: unknown partition table
[  375.988492] sd 8:0:0:1: [sdd] Attached SCSI disk
[  380.656540] scsi9 : iSCSI Initiator over TCP/IP
[  380.917533] scsi 9:0:0:0: Enclosure         HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[  380.919525] ses 9:0:0:0: Attached Enclosure device
[  380.919738] ses 9:0:0:0: Attached scsi generic sg7 type 13
[  380.927305] scsi 9:0:0:1: Direct-Access     HP       P2000 G3 iSCSI   T240 PQ: 0 ANSI: 5
[  380.933693] sd 9:0:0:1: Attached scsi generic sg8 type 0
[  380.938219] sd 9:0:0:1: [sde] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
[  380.946102] sd 9:0:0:1: [sde] Write Protect is off
[  380.949833] sd 9:0:0:1: [sde] Mode Sense: d7 00 00 08
[  380.950935] sd 9:0:0:1: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  380.961489]  sde: unknown partition table
[  380.969707] sd 9:0:0:1: [sde] Attached SCSI disk
[  394.938173] o2net: Connected to node zotac (num 0) at 10.247.9.96:7777
[  401.151541] o2net: Connection to node zotac (num 0) at 10.247.9.96:7777 shutdown, state 8
[  401.156642] o2net: Connection to node zotac (num 0) at 10.247.9.96:7777 shutdown, state 7
[  401.161717] o2net: No longer connected to node zotac (num 0) at 10.247.9.96:7777
[  401.166848] (mount.ocfs2,3573,1):dlm_send_nodeinfo:1294 ERROR: node mismatch -112, node 0
[  401.171475] (mount.ocfs2,3573,1):dlm_try_to_join_domain:1681 ERROR: status = -112
[  401.176085] (mount.ocfs2,3573,1):dlm_send_one_join_cancel:1399 ERROR: Error -107 when sending message 512 (key 0x666c6172) to node 0
[  401.180308] (mount.ocfs2,3573,1):dlm_send_join_cancels:1433 ERROR: Error return -107 cancelling join on node 0
[  401.184557] (mount.ocfs2,3573,1):dlm_send_join_cancels:1440 ERROR: status = -107
[  401.188783] (mount.ocfs2,3573,1):dlm_try_to_join_domain:1718 ERROR: status = -107
[  401.192638] (mount.ocfs2,3573,1):dlm_join_domain:1951 ERROR: status = -112
[  401.196597] (mount.ocfs2,3573,0):dlm_register_domain:2209 ERROR: status = -112
[  401.200821] (mount.ocfs2,3573,0):o2cb_cluster_connect:368 ERROR: status = -112
[  401.204571] (mount.ocfs2,3573,0):ocfs2_dlm_init:3001 ERROR: status = -112
[  401.208339] (mount.ocfs2,3573,1):ocfs2_mount_volume:1860 ERROR: status = -112
[  401.212110] ocfs2: Unmounting device (254,0) on (node 0)
[  401.215811] (mount.ocfs2,3573,1):ocfs2_fill_super:1234 ERROR: status = -112

** Model information
sys_vendor:         
product_name:         
product_version:         
chassis_vendor:         
chassis_version:         
bios_vendor: Intel Corp.
bios_version: GKPPT10H.86A.0049.2014.0224.1435
board_vendor: Intel Corporation
board_name: DCP847SKE
board_version: G80890-104

** Loaded modules:
ocfs2
jbd2
quota_tree
dm_round_robin
ses
enclosure
nf_conntrack_ipv4
nf_defrag_ipv4
iptable_filter
ip_tables
xt_tcpudp
xt_limit
nf_conntrack_ipv6
nf_defrag_ipv6
xt_state
nf_conntrack
ip6table_filter
ip6_tables
x_tables
ib_iser
rdma_cm
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
ib_addr
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
ocfs2_dlmfs
ocfs2_stack_o2cb
ocfs2_dlm
ocfs2_nodemanager
ocfs2_stackglue
configfs
hid_generic
usbhid
hid
loop
dm_multipath
scsi_dh
dm_mod
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crct10dif_pclmul
iTCO_wdt
iTCO_vendor_support
crc32_pclmul
evdev
ghash_clmulni_intel
cryptd
i2c_i801
pcspkr
battery
snd_hda_codec_hdmi
snd_hda_intel
i915
snd_hda_controller
drm_kms_helper
snd_hda_codec
snd_hwdep
video
snd_pcm
drm
i2c_algo_bit
snd_timer
i2c_core
lpc_ich
mei_me
snd
mfd_core
mei
soundcore
button
processor
xfs
libcrc32c
sg
sd_mod
crc_t10dif
crct10dif_common
crc32c_intel
ahci
libahci
thermal
ehci_pci
ehci_hcd
libata
e1000e
ptp
pps_core
usbcore
usb_common
scsi_mod
fan
thermal_sys

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet static
    address 10.247.9.97
    netmask 255.255.255.0
    network 10.247.9.0
    gateway 10.247.9.1
    broadcast 10.247.9.255
    dns-nameservers 10.247.9.16 10.247.9.5
    dns-search local


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether ec:a8:6b:ff:17:69 brd ff:ff:ff:ff:ff:ff
    inet 10.247.9.97/24 brd 10.247.9.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::eea8:6bff:feff:1769/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  eth0: 5480114   12671    0    0    0     0          0         0  1787726   17202    0    0    0     0       0          0
    lo:     260       3    0    0    0     0          0         0      260       3    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    11481 total packets received
    0 forwarded
    0 incoming packets discarded
    11445 incoming packets delivered
    17152 requests sent out
Icmp:
    7 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 3
        redirects: 4
    3 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 3
IcmpMsg:
        InType3: 3
        InType5: 4
        OutType3: 3
Tcp:
    7 active connections openings
    0 passive connection openings
    1 failed connection attempts
    1 connection resets received
    4 connections established
    11433 segments received
    16348 segments send out
    5 segments retransmited
    0 bad segments received.
    1 resets sent
Udp:
    5 packets received
    0 packets to unknown port received.
    0 packet receive errors
    796 packets sent
UdpLite:
TcpExt:
    1 TCP sockets finished time wait in fast timer
    2367 delayed acks sent
    1 packets directly queued to recvmsg prequeue.
    1 bytes directly received in process context from prequeue
    11187 packet headers predicted
    8 acknowledgments not containing data payload received
    10495 predicted acknowledgments
    4 congestion windows recovered without slow start after partial ack
    5 other TCP timeouts
    TCPSpuriousRtxHostQueues: 1
    TCPAutoCorking: 26
    TCPSynRetrans: 5
    TCPOrigDataSent: 10704
IpExt:
    InBcastPkts: 36
    InOctets: 5190836
    OutOctets: 1475776
    InBcastOctets: 3282
    InNoECTPkts: 12578


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at f7c2c000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f7c29000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at f080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7c28000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7c27000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04)
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 41
	Region 0: I/O ports at f0d0 [size=8]
	Region 1: I/O ports at f0c0 [size=4]
	Region 2: I/O ports at f0b0 [size=8]
	Region 3: I/O ports at f0a0 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at f7c26000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
	Subsystem: Intel Corporation Device [8086:2044]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f7c25000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]


** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0430:100e Sun Microsystems, Inc. 24.1" LCD Monitor v4 / FID-638 Mouse
Bus 002 Device 006: ID 076b:3021 OmniKey AG CardMan 3121
Bus 002 Device 004: ID 0566:4006 Monterey International Corp. 
Bus 002 Device 005: ID 0430:00a2 Sun Microsystems, Inc. Type 7 Keyboard


-- System Information:
Debian Release: 7.6
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16-0.bpo.2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.16-0.bpo.2-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.115~bpo70+1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.16-0.bpo.2-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.16-0.bpo.2-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16-0.bpo.2-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16-0.bpo.2-amd64/postinst/depmod-error-initrd-3.16-0.bpo.2-amd64: false
  linux-image-3.16-0.bpo.2-amd64/prerm/removing-running-kernel-3.16-0.bpo.2-amd64: true
  linux-image-3.16-0.bpo.2-amd64/postinst/mips-initrd-3.16-0.bpo.2-amd64:


Reply to: