Bug#764967: Please backport dts for the Olimex A20-OLinuXino-LIME
On Sun, 12 Oct 2014 18:23:24 +0200 Christian Kastner <debian@kvr.at> wrote:
> would it be possible to include the dts for the Olimex
> A20-OLinuXino-LIME in 3.16 so that it can be used with Jessie? This
> device is almost identical to the already existing A10-OLinuXino-LIME;
> they only differ in the processor.
>
> The relevant commit from 3.17 is:
>
> a71b443 ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
The patch from
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/?id=a71b4438af8242f383906071205db95a8b8e7b6d
does not apply cleanly against the current 3.16.5-2 kernel
package SVN. A patch against current SVN with a refreshed
version of the original patch (no content changes) is attached.
A test build is currently running, but will take until tomorrow.
Regards,
Karsten
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
Index: debian/patches/features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch
===================================================================
--- debian/patches/features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch (Revision 0)
+++ debian/patches/features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch (Arbeitskopie)
@@ -0,0 +1,160 @@
+From a71b4438af8242f383906071205db95a8b8e7b6d Mon Sep 17 00:00:00 2001
+From: FUKAUMI Naoki <naobsd@gmail.com>
+Date: Wed, 20 Aug 2014 14:25:03 +0900
+Subject: ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
+
+This patch adds support for Olimex A20-OLinuXino-LIME board.
+
+Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -380,6 +380,7 @@
+ sun7i-a20-cubieboard2.dtb \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-i12-tvbox.dtb \
++ sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-micro.dtb
+ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ tegra20-iris-512.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+@@ -0,0 +1,137 @@
++/*
++ * This is based on sun4i-a10-olinuxino-lime.dts
++ *
++ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
++ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++
++/ {
++ model = "Olimex A20-OLinuXino-LIME";
++ compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
++
++ soc@01c00000 {
++ mmc0: mmc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 1 0>; /* PH1 */
++ cd-inverted;
++ status = "okay";
++ };
++
++ usbphy: phy@01c13400 {
++ usb1_vbus-supply = <®_usb1_vbus>;
++ usb2_vbus-supply = <®_usb2_vbus>;
++ status = "okay";
++ };
++
++ ehci0: usb@01c14000 {
++ status = "okay";
++ };
++
++ ohci0: usb@01c14400 {
++ status = "okay";
++ };
++
++ ahci: sata@01c18000 {
++ target-supply = <®_ahci_5v>;
++ status = "okay";
++ };
++
++ ehci1: usb@01c1c000 {
++ status = "okay";
++ };
++
++ ohci1: usb@01c1c400 {
++ status = "okay";
++ };
++
++ pinctrl@01c20800 {
++ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
++ allwinner,pins = "PC3";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ led_pins_olinuxinolime: led_pins@0 {
++ allwinner,pins = "PH2";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <1>;
++ allwinner,pull = <0>;
++ };
++ };
++
++ uart0: serial@01c28000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++ };
++
++ i2c0: i2c@01c2ac00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ compatible = "x-powers,axp209";
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 8>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++ };
++ };
++
++ gmac: ethernet@01c50000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_mii_a>;
++ phy = <&phy1>;
++ phy-mode = "mii";
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_olinuxinolime>;
++
++ green {
++ label = "a20-olinuxino-lime:green:usr";
++ gpios = <&pio 7 2 0>;
++ default-state = "on";
++ };
++ };
++
++ reg_ahci_5v: ahci-5v {
++ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
++ gpio = <&pio 2 3 0>;
++ status = "okay";
++ };
++
++ reg_usb1_vbus: usb1-vbus {
++ status = "okay";
++ };
++
++ reg_usb2_vbus: usb2-vbus {
++ status = "okay";
++ };
++};
Index: debian/patches/series
===================================================================
--- debian/patches/series (Revision 21945)
+++ debian/patches/series (Arbeitskopie)
@@ -97,6 +97,7 @@
features/arm/dts-sun7i-Add-spi0_pins_a-pinctrl-setting.patch
features/arm/dts-sun7i-Add-uart3_pins_b-pinctrl-setting.patch
features/arm/dts-sun7i-Add-Banana-Pi-board.patch
+features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch
features/arm64/drivers-net-Add-APM-X-Gene-SoC-ethernet-driver-suppo.patch
features/arm64/drivers-net-NET_XGENE-should-depend-on-HAS_DMA.patch
features/arm64/net-xgene-Check-negative-return-value-of-xgene_enet_.patch
Reply to: