Bug#764223: booting eder.debian.org fails
Source: linux-image-loongson-2e
Version: 3.16+61~bpo70+1
Severity: grave
Booting eder.debian.org with this kernel fails while booting linux-image-3.14-0.bpo.2-loongson-2e works just fine:
Loading Linux ...
Loading initial ramdisk ...
Starting kernel (no output to be expected) ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-0.bpo.2-loongson-2e (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.16.3-2~bpo70+1 (2014-09-21)
[ 0.000000] memsize=256, highmemsize=768
[ 0.000000] CpuClock = 666340000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00006302 (ICT Loongson-2)
[ 0.000000] FPU revision is: 00000501
[ 0.000000] Checking for the multiply/shift bug... no.
[ 0.000000] Checking for the daddiu bug... no.
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 0000000010000000 @ 0000000000000000 (usable)
[ 0.000000] memory: 0000000004000000 @ 0000000010000000 (reserved)
[ 0.000000] memory: 0000000030000000 @ 0000000020000000 (usable)
[ 0.000000] memory: 0000000003ffffff @ 000000001c000001 (reserved)
[ 0.000000] Initial ramdisk at: 0x9800000002c50000 (14057094 bytes)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x4fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x13ffffff]
[ 0.000000] node 0: [mem 0x1c004000-0x4fffffff]
[ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
[ 0.000000] Primary instruction cache 64kB, VIPT, direct mapped, linesize 32 bytes.
[ 0.000000] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Unified secondary cache 512kB 4-way, linesize 32 bytes.
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 73474
[ 0.000000] Kernel command line: machtype=lemote-fuloong-2e-unknown root=/dev/sda2 console=ttyS0,115200 ro rd_start=0x82c50000 rd_size=0xd67e86
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 6, 1048576 bytes)
[ 0.000000] Memory: 985344K/1179632K available (5555K kernel code, 701K rwdata, 1536K rodata, 496K init, 33345K bss, 194288K reserved)
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x25
[ 0.004000] Calibrating delay loop... 443.90 BogoMIPS (lpj=887808)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036000] Security Framework initialized
[ 0.040000] AppArmor: AppArmor disabled by boot time parameter
[ 0.044000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.048000] Mount-cache hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.052000] Mountpoint-cache hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.056000] Initializing cgroup subsys memory
[ 0.060000] Initializing cgroup subsys devices
[ 0.064000] Initializing cgroup subsys freezer
[ 0.068000] Initializing cgroup subsys net_cls
[ 0.072000] Initializing cgroup subsys blkio
[ 0.076000] Initializing cgroup subsys perf_event
[ 0.080000] Initializing cgroup subsys net_prio
[ 0.084000] Checking for the daddi bug... no.
[ 0.088000] ftrace: allocating 17522 entries in 18 pages
[ 0.140000] devtmpfs: initialized
[ 0.152000] NET: Registered protocol family 16
[ 0.176000] vgaarb: loaded
[ 0.176000] SCSI subsystem initialized
[ 0.180000] PCI host bridge to bus 0000:00
[ 0.184000] pci_bus 0000:00: root bus resource [mem 0x14000000-0x1c000000]
[ 0.188000] pci_bus 0000:00: root bus resource [io 0x4000-0xffff]
[ 0.192000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.196000] via686b fix: ISA bridge
[ 0.196000] via686b fix: ISA bridge done
[ 0.200000] pci 0000:00:05.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.204000] pci 0000:00:05.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.208000] pci 0000:00:05.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.212000] pci 0000:00:05.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.216000] via686b fix: IDE
[ 0.216000] via686b fix: IDE done
[ 0.220000] pci 0000:00:05.4: quirk: [io 0xeee0-0xeeef] claimed by vt82c686 SMB
[ 0.224000] vgaarb: device added: PCI:0000:00:06.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.228000] pci 0000:00:06.0: BAR 0: assigned [mem 0x14000000-0x15ffffff pref]
[ 0.232000] pci 0000:00:06.0: BAR 6: assigned [mem 0x16000000-0x1601ffff pref]
[ 0.236000] pci 0000:00:07.0: BAR 6: assigned [mem 0x16020000-0x1603ffff pref]
[ 0.240000] pci 0000:00:06.0: BAR 2: assigned [mem 0x16040000-0x1604ffff]
[ 0.244000] pci 0000:00:08.0: BAR 0: assigned [mem 0x16050000-0x16050fff]
[ 0.248000] pci 0000:00:08.1: BAR 0: assigned [mem 0x16051000-0x16051fff]
[ 0.252000] pci 0000:00:05.5: BAR 0: assigned [io 0x4000-0x40ff]
[ 0.256000] pci 0000:00:05.6: BAR 0: assigned [io 0x4400-0x44ff]
[ 0.260000] pci 0000:00:06.0: BAR 1: assigned [io 0x4800-0x48ff]
[ 0.264000] pci 0000:00:07.0: BAR 0: assigned [io 0x4c00-0x4cff]
[ 0.268000] pci 0000:00:07.0: BAR 1: assigned [mem 0x16052000-0x160520ff]
[ 0.272000] pci 0000:00:08.2: BAR 0: assigned [mem 0x16052100-0x160521ff]
[ 0.276000] pci 0000:00:05.2: BAR 4: assigned [io 0x5000-0x501f]
[ 0.280000] pci 0000:00:05.3: BAR 4: assigned [io 0x5020-0x503f]
[ 0.284000] pci 0000:00:05.1: BAR 4: assigned [io 0x5040-0x504f]
[ 0.288000] pci 0000:00:05.5: BAR 1: assigned [io 0x5050-0x5053]
[ 0.292000] pci 0000:00:05.5: BAR 2: assigned [io 0x5054-0x5057]
[ 0.296000] Switched to clocksource MIPS
[ 0.344000] NET: Registered protocol family 2
[ 0.352000] TCP established hash table entries: 16384 (order: 3, 131072 bytes)
[ 0.360000] TCP bind hash table entries: 16384 (order: 3, 131072 bytes)
[ 0.368000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.372000] TCP: reno registered
[ 0.376000] UDP hash table entries: 1024 (order: 1, 32768 bytes)
[ 0.384000] UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes)
[ 0.388000] NET: Registered protocol family 1
[ 0.396000] Unpacking initramfs...
[ 2.132000] Freeing initrd memory: 13712K (9800000002c50000 - 98000000039b4000)
[ 2.140000] futex hash table entries: 256 (order: -2, 6144 bytes)
[ 2.148000] audit: initializing netlink subsys (disabled)
[ 2.152000] audit: type=2000 audit(1412542709.151:1): initialized
[ 2.160000] HugeTLB registered 32 MB page size, pre-allocated 0 pages
[ 2.164000] zbud: loaded
[ 2.168000] VFS: Disk quotas dquot_6.5.2
[ 2.172000] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 2.180000] msgmni has been set to 1951
[ 2.188000] alg: No test for stdrng (krng)
[ 2.192000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.200000] io scheduler noop registered
[ 2.204000] io scheduler deadline registered
[ 2.208000] io scheduler cfq registered (default)
[ 2.212000] radeonfb 0000:00:06.0: Invalid ROM contents
[ 2.300000] xtal calculation failed: 26564
[ 2.304000] radeonfb: Used default PLL infos
[ 2.308000] radeonfb: Reference=27.00 MHz (RefDiv=67) Memory=166.00 Mhz, System=166.00 MHz
[ 2.316000] radeonfb: PLL min 12000 max 35000
[ 2.416000] i2c i2c-1: unable to read EDID block.
[ 2.572000] i2c i2c-1: unable to read EDID block.
[ 2.728000] i2c i2c-1: unable to read EDID block.
[ 2.884000] i2c i2c-3: unable to read EDID block.
[ 3.040000] i2c i2c-3: unable to read EDID block.
[ 3.196000] i2c i2c-3: unable to read EDID block.
[ 3.352000] i2c i2c-2: unable to read EDID block.
[ 3.508000] i2c i2c-2: unable to read EDID block.
[ 3.664000] i2c i2c-2: unable to read EDID block.
[ 3.820000] i2c i2c-3: unable to read EDID block.
[ 3.976000] i2c i2c-3: unable to read EDID block.
[ 4.132000] i2c i2c-3: unable to read EDID block.
[ 4.252000] radeonfb: Monitor 1 type CRT found
[ 4.256000] radeonfb: Monitor 2 type no found
[ 4.612000] Console: switching to colour frame buffer device 80x30
[ 4.640000] radeonfb (0000:00:06.0): ATI Radeon 515a "QZ"
[ 4.644000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.684000] console [ttyS0] enabled I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.684000] console [ttyS0] enabled
[ 4.692000] bootconsole [early0] disabled
[ 4.692000] bootconsole [early0] disabled
[ 4.700000] swapper: page allocation failure: order:0, mode:0x10d1
[ 4.708000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.16-0.bpo.2-loongson-2e #1 Debian 3.16.3-2~bpo70+1
[ 4.716000] Stack : 0000000000008000 ffffffff803f4f98 ffffffff80950000 ffffffff80953908
0000000000000000 0000000000000000 ffffffff8074cec8 ffffffff8080b267
0000000000000001 0000000000000040 00000000000010d1 0000000000000000
0000000000000000 ffffffff80800000 0000000000000000 ffffffff806582d0
0000000000000000 980000004e0777f8 00000000000010d1 ffffffff801781cc
980000004e073930 ffffffff8074cec8 0000000000000000 0000000000000000
0000000000000000 0000000000000000 00ffffff8080b226 0000000000000000
0000000000000000 980000004e077750 0000000000000000 ffffffff801f6904
0000000000000000 00000000b54c6fb4 00000000000010d1 0000000000000000
0000000000000001 ffffffff80109c60 ffffffff8088ef28 ffffffff801f6904
...
[ 4.784000] Call Trace:
[ 4.788000] [<ffffffff80109c60>] show_stack+0x78/0x90
[ 4.792000] [<ffffffff801f6904>] warn_alloc_failed+0xfc/0x140
[ 4.800000] [<ffffffff801f9f7c>] __alloc_pages_nodemask+0x7c4/0xa30
[ 4.808000] [<ffffffff801fa20c>] __get_free_pages+0x24/0xa0
[ 4.812000] [<ffffffff80119bec>] mips_dma_alloc_coherent+0x10c/0x1e0
[ 4.820000] [<ffffffff804ac320>] dmam_alloc_coherent+0x80/0xf8
[ 4.824000] [<ffffffff804ec978>] ata_bmdma_port_start+0x48/0x78
[ 4.832000] [<ffffffff804f2ee4>] via_port_start+0x2c/0x70
[ 4.836000] [<ffffffff804d7c30>] ata_host_start+0x130/0x270
[ 4.844000] [<ffffffff804ed24c>] ata_pci_sff_activate_host+0x54/0x270
[ 4.848000] [<ffffffff804ed8d8>] ata_pci_init_one+0x150/0x200
[ 4.856000] [<ffffffff804f2b60>] via_init_one+0x1b8/0x2e8
[ 4.860000] [<ffffffff80427628>] pci_device_probe+0xb0/0x110
[ 4.868000] [<ffffffff8049ae7c>] driver_probe_device+0xdc/0x400
[ 4.872000] [<ffffffff8049b270>] __driver_attach+0xd0/0xd8
[ 4.880000] [<ffffffff80498e38>] bus_for_each_dev+0x70/0xc0
[ 4.884000] [<ffffffff8049a280>] bus_add_driver+0x128/0x250
[ 4.892000] [<ffffffff8049bd40>] driver_register+0x90/0x138
[ 4.896000] [<ffffffff801005c0>] do_one_initcall+0x110/0x210
[ 4.904000] [<ffffffff808a4e1c>] kernel_init_freeable+0x188/0x250
[ 4.908000] [<ffffffff80656b70>] kernel_init+0x20/0x118
[ 4.916000] [<ffffffff80103f0c>] ret_from_kernel_thread+0x10/0x18
[ 4.920000]
[ 4.924000] Mem-Info:
[ 4.924000] DMA per-cpu:
[ 4.928000] CPU 0: hi: 0, btch: 1 usd: 0
[ 4.932000] Normal per-cpu:
[ 4.936000] CPU 0: hi: 42, btch: 7 usd: 30
[ 4.940000] active_anon:0 inactive_anon:0 isolated_anon:0
[ 4.940000] active_file:1479 inactive_file:1699 isolated_file:0
[ 4.940000] unevictable:0 dirty:0 writeback:0 unstable:0
[ 4.940000] free:58635 slab_reclaimable:311 slab_unreclaimable:189
[ 4.940000] mapped:0 shmem:0 pagetables:0 bounce:0
[ 4.940000] free_cma:0
[ 4.972000] DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:16384kB managed:0kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
[ 5.012000] lowmem_reserve[]: 0 243 243
[ 5.016000] Normal free:938160kB min:3840kB low:4800kB high:5760kB active_anon:0kB inactive_anon:0kB active_file:23664kB inactive_file:27184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:1163248kB managed:999056kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:4976kB slab_unreclaimable:3024kB kernel_stack:368kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[ 5.060000] lowmem_reserve[]: 0 0 0
[ 5.064000] DMA: 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB 0*32768kB = 0kB
[ 5.076000] Normal: 5*16kB (EM) 5*32kB (UM) 1*64kB (M) 3*128kB (EM) 4*256kB (UM) 3*512kB (UM) 5*1024kB (UEM) 4*2048kB (EM) 1*4096kB (M) 4*8192kB (UEM) 2*16384kB (EM) 26*32768kB (MR) = 938160kB
[ 5.092000] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
[ 5.104000] 3192 total pagecache pages
[ 5.108000] 0 pages in swap cache
[ 5.108000] Swap cache stats: add 0, delete 0, find 0/0
[ 5.116000] Free swap = 0kB
[ 5.120000] Total swap = 0kB
[ 5.120000] 73727 pages RAM
[ 5.124000] 0 pages HighMem/MovableOnly
[ 5.128000] 10262 pages reserved
[ 5.132000] pata_via 0000:00:05.1: failed to start port 0 (errno=-12)
[ 5.140000] pata_via: probe of 0000:00:05.1 failed with error -12
[ 5.144000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.152000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.156000] mousedev: PS/2 mouse device common for all mice
[ 5.164000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 5.172000] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 5.176000] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.184000] atkbd serio0: keyboard reset failed on isa0060/serio0
[ 5.188000] TCP: cubic registered
[ 5.192000] NET: Registered protocol family 10
[ 5.200000] mip6: Mobile IPv6
[ 5.204000] NET: Registered protocol family 17
[ 5.208000] mpls_gso: MPLS GSO support
[ 5.212000] registered taskstats version 1
[ 5.216000] rtc_cmos rtc_cmos: setting system clock to 2014-10-05 20:58:32 UTC (1412542712)
[ 5.228000] Freeing unused kernel memory: 496K (ffffffff808a4000 - ffffffff80920000)
Loading, please wait...
[ 5.240000] atkbd serio1: keyboard reset failed on isa0060/serio1
[ 5.308000] udevd[54]: starting version 175
[ 5.560000] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 5.568000] usbcore: registered new interface driver usbfs
[ 5.580000] 8139too 0000:00:07.0 eth0: RealTek RTL8139 at 0x900000001fd04c00, 00:0a:01:00:10:62, IRQ 58
[ 5.592000] usbcore: registered new interface driver hub
[ 5.604000] usbcore: registered new device driver usb
[ 5.644000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.668000] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.676000] ehci-pci: EHCI PCI platform driver
[ 5.684000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.692000] ehci-pci 0000:00:08.2: EHCI Host Controller
[ 5.756000] ohci-pci: OHCI PCI platform driver
[ 5.760000] ehci-pci 0000:00:08.2: new USB bus registered, assigned bus number 1
[ 5.784000] ehci-pci 0000:00:08.2: irq 60, io mem 0x16052100
[ 5.804000] ehci-pci 0000:00:08.2: USB 2.0 started, EHCI 1.00
[ 5.816000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.824000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.832000] usb usb1: Product: EHCI Host Controller
[ 5.836000] usb usb1: Manufacturer: Linux 3.16-0.bpo.2-loongson-2e ehci_hcd
[ 5.844000] usb usb1: SerialNumber: 0000:00:08.2
[ 5.856000] hub 1-0:1.0: USB hub found
[ 5.868000] hub 1-0:1.0: 4 ports detected
[ 5.876000] ohci-pci 0000:00:08.0: OHCI PCI host controller
[ 5.884000] ohci-pci 0000:00:08.0: new USB bus registered, assigned bus number 2
[ 5.896000] ohci-pci 0000:00:08.0: irq 58, io mem 0x16050000
[ 5.988000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.996000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.004000] usb usb2: Product: OHCI PCI host controller
[ 6.008000] usb usb2: Manufacturer: Linux 3.16-0.bpo.2-loongson-2e ohci_hcd
[ 6.016000] usb usb2: SerialNumber: 0000:00:08.0
[ 6.024000] hub 2-0:1.0: USB hub found
[ 6.028000] hub 2-0:1.0: 2 ports detected
[ 6.032000] uhci_hcd 0000:00:05.2: UHCI Host Controller
[ 6.036000] uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 3
[ 6.044000] uhci_hcd 0000:00:05.2: detected 2 ports
[ 6.048000] uhci_hcd 0000:00:05.2: irq 10, io base 0x00005000
[ 6.056000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.064000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.072000] usb usb3: Product: UHCI Host Controller
[ 6.076000] usb usb3: Manufacturer: Linux 3.16-0.bpo.2-loongson-2e uhci_hcd
[ 6.084000] usb usb3: SerialNumber: 0000:00:05.2
[ 6.088000] hub 3-0:1.0: USB hub found
[ 6.092000] hub 3-0:1.0: 2 ports detected
[ 6.100000] ohci-pci 0000:00:08.1: OHCI PCI host controller
[ 6.104000] ohci-pci 0000:00:08.1: new USB bus registered, assigned bus number 4
[ 6.112000] ohci-pci 0000:00:08.1: irq 59, io mem 0x16051000
[ 6.204000] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.212000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.220000] usb usb4: Product: OHCI PCI host controller
[ 6.224000] usb usb4: Manufacturer: Linux 3.16-0.bpo.2-loongson-2e ohci_hcd
[ 6.232000] usb usb4: SerialNumber: 0000:00:08.1
[ 6.236000] hub 4-0:1.0: USB hub found
[ 6.244000] hub 4-0:1.0: 2 ports detected
[ 6.248000] uhci_hcd 0000:00:05.3: UHCI Host Controller
[ 6.260000] uhci_hcd 0000:00:05.3: new USB bus registered, assigned bus number 5
[ 6.280000] uhci_hcd 0000:00:05.3: detected 2 ports
[ 6.284000] uhci_hcd 0000:00:05.3: irq 11, io base 0x00005020
[ 6.292000] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.296000] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.304000] usb usb5: Product: UHCI Host Controller
[ 6.312000] usb usb5: Manufacturer: Linux 3.16-0.bpo.2-loongson-2e uhci_hcd
[ 6.316000] usb usb5: SerialNumber: 0000:00:05.3
[ 6.324000] hub 5-0:1.0: USB hub found
[ 6.328000] hub 5-0:1.0: 2 ports detected
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... [ 6.432000] device-mapper: uevent: version 1.0.3
[ 6.440000] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
done.
Begin: Waiting for root file system ... done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda2 does not exist. Dropping to a shell!
modprobe: module ehci-orion not found in modules.dep
[ 37.384000] hidraw: raw HID events driver (C) Jiri Kosina
[ 37.396000] usbcore: registered new interface driver usbhid
[ 37.400000] usbhid: USB HID core driver
BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) [ 51.500000] random: nonblocking pool is initialized
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Reply to: