Bug#764095: linux-image-3.16-2-amd64: sound stops after "perf interrupt took too long"
Package: src:linux
Version: 3.16.3-2
Severity: normal
I'm not sure whether to report this here, or to alsa or what.
Ever since upgrading to jessie/testing, sound output will suddenly stop
from time to time. It only comes back after reloading the module,
snd_hda_intel . It seems that, every time the sound dies, the following
message is logged (with changing values):
kernel: [ 2619.136098] perf interrupt took too long (5054 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
This is in today's jessie, in a Thinkpad X201. lspci -nn | grep Audio:
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
The presence or absence of pulseaudio seems to make no difference.
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=/dev/mapper/inaba-root ro quiet
** Tainted: R (8)
* User forced a module unload.
** Kernel log:
[ 17.979823] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 17.981153] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.981259] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.981357] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.981443] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.981529] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 18.132755] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 615624
[ 18.132771] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 18.183465] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 18.224314] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 18.235052] [drm] Memory usable by graphics device = 2048M
[ 18.235056] [drm] Replacing VGA console driver
[ 18.235503] Console: switching to colour dummy device 80x25
[ 18.260374] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 18.260392] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.260395] [drm] Driver supports precise vblank timestamp query.
[ 18.260498] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 18.294265] fbcon: inteldrmfb (fb0) is primary device
[ 18.737931] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 18.737932] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 18.737933] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 18.737935] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 18.737984] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 18.797669] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.868836] Console: switching to colour frame buffer device 160x50
[ 18.871127] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 18.871129] i915 0000:00:02.0: registered panic notifier
[ 18.905216] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 18.913911] acpi device:01: registered as cooling_device5
[ 18.914022] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 18.914197] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.988160] Bluetooth: Core ver 2.19
[ 20.988178] NET: Registered protocol family 31
[ 20.988180] Bluetooth: HCI device and connection manager initialized
[ 20.988190] Bluetooth: HCI socket layer initialized
[ 20.988192] Bluetooth: L2CAP socket layer initialized
[ 20.988202] Bluetooth: SCO socket layer initialized
[ 21.129632] cfg80211: World regulatory domain updated:
[ 21.129636] cfg80211: DFS Master region: unset
[ 21.129637] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 21.129639] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.129640] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.129642] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.129643] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.129644] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.129646] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 21.193109] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 21.217834] usbcore: registered new interface driver btusb
[ 21.218009] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 21.911685] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 22.243947] systemd-journald[238]: Received request to flush runtime journal from PID 1
[ 22.330803] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 23.536370] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 23.793521] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 24.053988] RPC: Registered named UNIX socket transport module.
[ 24.053992] RPC: Registered udp transport module.
[ 24.053993] RPC: Registered tcp transport module.
[ 24.053994] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.102404] FS-Cache: Loaded
[ 24.154460] FS-Cache: Netfs 'nfs' registered for caching
[ 24.247334] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.663001] usb 1-1.4: USB disconnect, device number 4
[ 32.112202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.112207] Bluetooth: BNEP filters: protocol multicast
[ 32.112219] Bluetooth: BNEP socket layer initialized
[ 35.221719] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.221926] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[ 35.436887] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.437097] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[ 35.526023] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.670525] wlan0: authenticate with 18:62:2c:cb:db:47
[ 39.703184] wlan0: send auth to 18:62:2c:cb:db:47 (try 1/3)
[ 39.706196] wlan0: authenticated
[ 39.709420] wlan0: associate with 18:62:2c:cb:db:47 (try 1/3)
[ 39.713010] wlan0: RX AssocResp from 18:62:2c:cb:db:47 (capab=0x411 status=0 aid=2)
[ 39.716250] wlan0: associated
[ 39.716286] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1008.896838] [Firmware Bug]: battery: reported current charge level (2994) is higher than reported maximum charge level (2994).
[ 1440.363712] perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2434.174054] Disabling lock debugging due to kernel taint
[ 2439.801630] snd_hda_intel: unknown parameter 'vid' ignored
[ 2439.801636] snd_hda_intel: unknown parameter 'pid' ignored
[ 2439.801917] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2439.810689] sound hdaudioC0D0: CX20585: BIOS auto-probing.
[ 2439.811126] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 2439.811129] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2439.811131] sound hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 2439.811133] sound hdaudioC0D0: mono: mono_out=0x0
[ 2439.811135] sound hdaudioC0D0: inputs:
[ 2439.811138] sound hdaudioC0D0: Mic=0x1b
[ 2439.811140] sound hdaudioC0D0: Internal Mic=0x23
[ 2439.811142] sound hdaudioC0D0: Dock Mic=0x1a
[ 2439.812293] sound hdaudioC0D0: Enable sync_write for stable communication
[ 2439.817955] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input16
[ 2439.818422] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 2439.818492] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 2439.818560] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 2439.818628] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 2439.818696] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 2619.136098] perf interrupt took too long (5054 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
** Model information
sys_vendor: LENOVO
product_name: 368OFP5
product_version: ThinkPad X201
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 6QET61WW (1.31 )
board_vendor: LENOVO
board_name: 368OFP5
board_version: Not Available
** Loaded modules:
snd_hda_intel
ctr
ccm
bnep
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ecb
btusb
bluetooth
6lowpan_iphc
intel_powerclamp
arc4
iwldvm
mac80211
coretemp
joydev
i915
kvm_intel
kvm
snd_hda_codec_hdmi
snd_hda_codec_conexant
snd_hda_codec_generic
snd_hda_controller
iTCO_wdt
drm_kms_helper
iTCO_vendor_support
drm
snd_hda_codec
psmouse
snd_hwdep
pcspkr
evdev
battery
ac
wmi
intel_ips
serio_raw
snd_pcm_oss
snd_mixer_oss
iwlwifi
snd_pcm
cfg80211
thinkpad_acpi
acpi_cpufreq
tpm_tis
lpc_ich
tpm
mei_me
nvram
rfkill
video
processor
button
i2c_algo_bit
i2c_i801
snd_timer
mei
i2c_core
mfd_core
shpchp
snd
soundcore
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
ahci
libahci
aesni_intel
libata
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
scsi_mod
cryptd
ehci_pci
ehci_hcd
e1000e
usbcore
ptp
pps_core
thermal
usb_common
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Lenovo Device [17aa:2193]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:215a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Lenovo Device [17aa:215f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2727800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:2162]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1808 [size=8]
Region 1: Memory at f2524000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06)
Subsystem: Lenovo Device [17aa:2153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2525000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2728000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: Lenovo Device [17aa:215e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at f2520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2800000-00000000f28fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f2400000-f24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2728400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 06)
Subsystem: Lenovo Device [17aa:2166]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:2168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 1860 [size=8]
Region 1: I/O ports at 1814 [size=4]
Region 2: I/O ports at 1818 [size=8]
Region 3: I/O ports at 1810 [size=4]
Region 4: I/O ports at 1840 [size=32]
Region 5: Memory at f2727000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: Lenovo Device [17aa:2167]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2728800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
Subsystem: Lenovo Device [17aa:2190]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2526000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35)
Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation 1st Generation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation 1st Generation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation 1st Generation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=ja_JP.UTF-8, LC_CTYPE=ja_JP.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to ja_JP.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
ii firmware-intelwimax 0.43
ii firmware-ipw2x00 0.43
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
ii firmware-netxen 0.43
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
Reply to: