Bug#702362: /lib/modules/3.16-2-amd64/kernel/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko: Re: linux-image-3.2.0-4-amd64: Wireless Lan driver brcmsmac not connecting to channels 12, 13 & 14
Package: src:linux
Version: 3.16.3-2
Followup-For: Bug #702362
Dear Maintainer,
this bug is still visible even in the bug report was a link with a patch suggestion.
I am using it with reg set to DE where channels 12 and 13 are valid ones.
iw reg get
country DE: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20)
(5150 - 5350 @ 80), (N/A, 20), NO-OUTDOOR
(5470 - 5725 @ 80), (N/A, 26), DFS
(57240 - 65880 @ 2160), (N/A, 40), NO-OUTDOOR
Changing the channel below 11 is not a valid w/a for everyone.
Best regards
Christian
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=/dev/mapper/vg00-lvRoot ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 9777.561934] x86: Booting SMP configuration:
[ 9777.561935] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9777.572937] kvm: enabling virtualization on CPU1
[ 9777.575142] Intel pstate controlling: cpu 1
[ 9777.575204] CPU1 is up
[ 9777.575269] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 9777.586262] kvm: enabling virtualization on CPU2
[ 9777.588450] Intel pstate controlling: cpu 2
[ 9777.588508] CPU2 is up
[ 9777.588575] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 9777.599563] kvm: enabling virtualization on CPU3
[ 9777.601782] Intel pstate controlling: cpu 3
[ 9777.601841] CPU3 is up
[ 9777.604895] ACPI: Waking up from system sleep state S3
[ 9777.655012] acpi LNXPOWER:02: Turning OFF
[ 9777.655064] acpi LNXPOWER:01: Turning OFF
[ 9777.669665] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 9777.669767] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9777.677427] PM: noirq resume of devices complete after 22.309 msecs
[ 9777.678174] PM: early resume of devices complete after 0.689 msecs
[ 9777.678281] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 9777.678332] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 9777.682828] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 9777.693782] sd 0:0:0:0: [sda] Starting disk
[ 9777.769985] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 9777.769986] [drm] This can cause pipe underruns and display issues.
[ 9777.769987] [drm] Please upgrade your BIOS to fix this.
[ 9777.840963] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 9777.893843] usb 2-1.6: reset full-speed USB device number 4 using ehci-pci
[ 9778.021737] ata5: SATA link down (SStatus 0 SControl 300)
[ 9778.037759] ata6: SATA link down (SStatus 0 SControl 300)
[ 9778.045765] ata4: SATA link down (SStatus 0 SControl 300)
[ 9778.089864] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 9778.092270] parport_pc 00:04: activated
[ 9778.098038] usb 2-1.4: reset high-speed USB device number 3 using ehci-pci
[ 9778.149867] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9778.153054] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9778.156129] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9778.156140] ata2.00: configured for UDMA/100
[ 9778.242041] firewire_core 0000:23:00.0: rediscovered device fw0
[ 9778.442870] PM: resume of devices complete after 763.815 msecs
[ 9778.444212] PM: Finishing wakeup.
[ 9778.444216] Restarting tasks ...
[ 9778.444433] acpi PNP0501:00: Still not present
[ 9778.447331] done.
[ 9778.452089] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 9778.452465] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 9778.456138] usb 1-1.2: USB disconnect, device number 4
[ 9778.457210] cdc_ncm 1-1.2:1.6 usb0: unregister 'cdc_ncm' usb-0000:00:1a.0-1.2, CDC NCM
[ 9778.491120] video LNXVIDEO:01: Restoring backlight state
[ 9778.640275] e1000e: eth0 NIC Link is Down
[ 9778.640918] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9778.795442] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 9778.898800] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 9778.898955] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9778.969369] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 9778.969388] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 9778.969644] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9778.982834] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9779.419615] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 9779.520233] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=3a1d
[ 9779.520242] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9779.520246] usb 1-1.2: Product: HP hs2340 HSPA+ MobileBroadband
[ 9779.520250] usb 1-1.2: Manufacturer: HP
[ 9779.520254] usb 1-1.2: SerialNumber: 5C513A92C23A6AE0
[ 9779.553208] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
[ 9779.554571] cdc_acm 1-1.2:1.3: ttyACM1: USB ACM device
[ 9779.556848] cdc_wdm 1-1.2:1.5: cdc-wdm0: USB WDM device
[ 9779.572296] cdc_ncm 1-1.2:1.6: MAC-Address: 02:80:37:ec:02:00
[ 9779.573352] cdc_ncm 1-1.2:1.6 usb0: register 'cdc_ncm' at usb-0000:00:1a.0-1.2, CDC NCM, 02:80:37:ec:02:00
[ 9779.574474] cdc_wdm 1-1.2:1.8: cdc-wdm1: USB WDM device
[ 9779.574914] cdc_acm 1-1.2:1.9: ttyACM2: USB ACM device
[ 9779.804463] cdc_wdm 1-1.2:1.5: wdm_int_callback - 0 bytes
[ 9779.821484] cdc_wdm 1-1.2:1.8: wdm_int_callback - 0 bytes
[ 9780.684815] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9780.808575] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9780.809705] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 9780.809965] ata1.00: configured for UDMA/133
[ 9780.928678] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 9780.935272] wlan0: authenticate with e0:91:f5:b8:75:20
[ 9780.935322] wlan0: send auth to e0:91:f5:b8:75:20 (try 1/3)
[ 9780.936700] cdc_ncm 1-1.2:1.6 usb0: network connection: disconnected
[ 9780.940828] wlan0: authenticated
[ 9780.945013] wlan0: associate with e0:91:f5:b8:75:20 (try 1/3)
[ 9780.950568] wlan0: RX AssocResp from e0:91:f5:b8:75:20 (capab=0x431 status=0 aid=1)
[ 9780.951209] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 9780.951213] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 9780.951220] wlan0: associated
[ 9780.951243] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9780.951283] cfg80211: Calling CRDA for country: DE
[ 9780.953896] cfg80211: Regulatory domain changed to country: DE
[ 9780.953899] cfg80211: DFS Master region: ETSI
[ 9780.953900] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9780.953903] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9780.953906] cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9780.953908] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s)
[ 9780.953910] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 9781.216840] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 9782.679542] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[11070.434809] traps: reportbug[3170] trap divide error ip:7fbcc1fd101c sp:7fff8ed700d0 error:0 in libgtk-x11-2.0.so.0.2400.24[7fbcc1eb0000+436000]
** Model information
sys_vendor: Hewlett-Packard
product_name: HP ProBook 6460b
product_version: A0001D02
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68SCE Ver. F.42
board_vendor: Hewlett-Packard
board_name: 161D
board_version: KBC Version 97.4D
** Loaded modules:
rfcomm
hid_generic
usbhid
hid
ctr
ccm
bnep
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
binfmt_misc
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ecb
cdc_mbim
btusb
cdc_wdm
bluetooth
cdc_acm
cdc_ncm
usbnet
mii
6lowpan_iphc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
joydev
cfg80211
x86_pkg_temp_thermal
intel_powerclamp
ssb
rng_core
pcmcia
pcmcia_core
intel_rapl
coretemp
snd_hda_codec_hdmi
kvm_intel
i915
hp_wmi
sparse_keymap
rfkill
kvm
iTCO_wdt
snd_hda_codec_idt
snd_hda_codec_generic
iTCO_vendor_support
snd_hda_intel
snd_hda_controller
evdev
bcma
psmouse
snd_hda_codec
hp_accel
drm_kms_helper
pcspkr
serio_raw
snd_hwdep
snd_pcm
snd_timer
snd
tpm_infineon
drm
lis3lv02d
lpc_ich
soundcore
video
mei_me
shpchp
mfd_core
battery
wmi
input_polldev
i2c_algo_bit
i2c_core
mei
tpm_tis
button
tpm
ac
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
firewire_ohci
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
libata
firewire_core
scsi_mod
crc_itu_t
sdhci_pci
sdhci
mmc_core
ehci_pci
ehci_hcd
e1000e
usbcore
ptp
usb_common
pps_core
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 64:31:50:94:7a:8f brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether ac:81:12:70:6f:ba brd ff:ff:ff:ff:ff:ff
inet 10.2.1.101/24 brd 10.2.1.255 scope global dynamic wlan0
valid_lft 41151sec preferred_lft 41151sec
inet6 fe80::ae81:12ff:fe70:6fba/64 scope link
valid_lft forever preferred_lft forever
5: usb0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 02:80:37:ec:02:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 7266863 20773 0 1 0 0 0 0 363205 2766 0 0 0 0 0 0
usb0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 20822421 43649 0 0 0 0 0 0 20822421 43649 0 0 0 0 0 0
*** Protocol statistics:
Ip:
12142 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
9181 incoming packets delivered
2731 requests sent out
2 dropped because of missing route
Icmp:
14 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 14
14 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 14
IcmpMsg:
InType3: 14
OutType3: 14
Tcp:
63 active connections openings
50 passive connection openings
0 failed connection attempts
2 connection resets received
3 connections established
47081 segments received
46150 segments send out
1 segments retransmited
0 bad segments received.
3 resets sent
Udp:
1877 packets received
14 packets to unknown port received.
0 packet receive errors
118 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
51 TCP sockets finished time wait in fast timer
1725 delayed acks sent
Quick ack mode was activated 13 times
522 packets directly queued to recvmsg prequeue.
17643 bytes directly in process context from backlog
1 bytes directly received in process context from prequeue
18855 packet headers predicted
45 packets header predicted and directly queued to user
677 acknowledgments not containing data payload received
18865 predicted acknowledgments
TCPLossProbes: 1
TCPLossProbeRecovery: 1
13 DSACKs sent for old packets
1 DSACKs received
2 connections reset due to early user close
TCPRcvCoalesce: 301
TCPOFOQueue: 32
TCPAutoCorking: 8
TCPOrigDataSent: 24967
IpExt:
InMcastPkts: 74
OutMcastPkts: 67
InBcastPkts: 5513
InOctets: 6018491
OutOctets: 263242
InMcastOctets: 11489
OutMcastOctets: 9472
InBcastOctets: 797596
InNoECTPkts: 12142
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d4000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d4724000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d4700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d472a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4060 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4729000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d4720000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d4600000-d46fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=22, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: d0000000-d3ffffff
Prefetchable memory behind bridge: 00000000bfb00000-00000000bfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=23, subordinate=23, sec-latency=0
Memory behind bridge: d4500000-d45fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=24, subordinate=24, sec-latency=0
Memory behind bridge: d4400000-d44fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4728000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4040 [size=32]
Region 5: Memory at d4727000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
23:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4500000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d4505000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
23:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4504000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at d4508000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
23:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:161d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4503000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
24:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:145c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
** USB devices:
Bus 002 Device 004: ID 03f0:231d Hewlett-Packard 4 GB Flash Drive
Bus 002 Device 003: ID 04f2:b230 Chicony Electronics Co., Ltd Integrated HP HD Webcam
Bus 002 Device 005: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 03f0:3a1d Hewlett-Packard
Bus 001 Device 003: ID 138a:003c Validity Sensors, Inc. VFS471 Fingerprint Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.43
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
Reply to: