Bug#763551: via-rhine: via-rhine frames errors, cant autoneg, no link with cisco
Package: src:linux
Version: 3.16.3-2
Severity: normal
File: via-rhine
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
via-rhine ethernet device builed into motherboard connected to any device is making problems, not stable, problems with autoneg. After connected mikrotik problems. After connected cisco, no matther what settings on both sides static speed duplex, no link all the time. Autoneg set something but huge packet loss, about 90% loss...
* What exactly did you do (or not do) that was effective (or
ineffective)?
Checked on three the same terminals Igel Thin Client 5/4, with the same debian 'testing' on the same kernel as attached information here. Set static speed of interfaces, change other side devices, cisco, mikrotik.
* What was the outcome of this action?
No link, or huge packet loss
* What outcome did you expect instead?
Normal working interface.
-- Package-specific info:
** Version:
Linux version 3.16-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-686-pae root=UUID=bdd4c951-f38e-440c-9c77-7ad4909cf174 ro quiet
** Not tainted
** Kernel log:
[ 3.331840] sd 0:0:0:0: [sda] Write Protect is off
[ 3.331852] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.331914] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.336234] sda: sda1 sda2 < sda5 >
[ 3.337576] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.341611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.684203] Switched to clocksource tsc
[ 5.288095] floppy0: no floppy controllers found
[ 5.288122] work still pending
[ 5.355913] PM: Starting manual resume from disk
[ 5.355936] PM: Hibernation image partition 8:5 present
[ 5.355942] PM: Looking for hibernation image.
[ 5.357280] PM: Image not found (code -22)
[ 5.357291] PM: Hibernation image not present or could not be loaded.
[ 5.410447] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.841068] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.908794] systemd[1]: Inserted module 'autofs4'
[ 5.910444] systemd[1]: Set hostname to <vlan1690>.
[ 6.331105] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 6.332791] systemd[1]: Starting Syslog Socket.
[ 6.333025] systemd[1]: Listening on Syslog Socket.
[ 6.333092] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.333399] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.333463] systemd[1]: Starting Remote File Systems (Pre).
[ 6.333512] systemd[1]: Reached target Remote File Systems (Pre).
[ 6.333561] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.333667] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.333713] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.333802] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.333953] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.334337] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.334433] systemd[1]: Starting Journal Socket.
[ 6.334626] systemd[1]: Listening on Journal Socket.
[ 6.334725] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.337690] systemd[1]: Mounting Debug File System...
[ 6.339891] systemd[1]: Starting Syslog.
[ 6.339977] systemd[1]: Reached target Syslog.
[ 6.342607] systemd[1]: Starting Journal Service...
[ 6.349163] systemd[1]: Started Journal Service.
[ 6.540559] l2tp_core: L2TP core driver, V2.0
[ 6.550400] l2tp_netlink: L2TP netlink interface
[ 6.553036] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 6.827907] 8021q: 802.1Q VLAN Support v1.8
[ 6.888227] systemd-udevd[134]: starting version 208
[ 7.180983] tsc: Marking TSC unstable due to TSC halts in idle
[ 7.181017] ACPI: acpi_idle registered with cpuidle
[ 7.187990] Switched to clocksource acpi_pm
[ 7.199465] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.199490] ACPI: Power Button [PWRB]
[ 7.204668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.204691] ACPI: Power Button [PWRF]
[ 7.271823] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.274411] parport_pc 00:06: reported by Plug and Play ACPI
[ 7.274484] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.582384] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.689143] VIA RNG detected
[ 7.722524] hwmon_vid: Using 6-bit VID table for VIA C7 CPU
[ 7.795116] longhaul: Option "enable" not set. Aborting.
[ 7.826165] padlock_aes: Using VIA PadLock ACE for AES algorithm.
[ 7.934258] Adding 210940k swap on /dev/sda5. Priority:-1 extents:1 across:210940k FS
[ 7.939844] padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[ 8.046438] ppdev: user-space parallel port driver
[ 8.235125] random: nonblocking pool is initialized
[ 8.273757] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.554945] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 8.928186] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.928202] 8021q: adding VLAN 0 to HW filter on device eth0
[ 8.928640] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None
[ 8.931429] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.947004] RPC: Registered named UNIX socket transport module.
[ 9.947018] RPC: Registered udp transport module.
[ 9.947024] RPC: Registered tcp transport module.
[ 9.947030] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.966005] FS-Cache: Loaded
[ 10.026785] FS-Cache: Netfs 'nfs' registered for caching
[ 10.086589] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.344160] floppy0: no floppy controllers found
[ 10.344188] work still pending
[ 10.536240] e1000 0000:00:08.0 eth0: Reset adapter
[ 10.648896] Bridge firewalling registered
[ 10.695222] device eth1.1690 entered promiscuous mode
[ 10.695238] device eth1 entered promiscuous mode
[ 10.702774] br1690: port 1(eth1.1690) entered forwarding state
[ 10.702805] br1690: port 1(eth1.1690) entered forwarding state
[ 10.796594] tun: Universal TUN/TAP device driver, 1.6
[ 10.796609] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 10.814541] device eoip1690 entered promiscuous mode
[ 10.814617] br1690: port 2(eoip1690) entered forwarding state
[ 10.814633] br1690: port 2(eoip1690) entered forwarding state
[ 12.736297] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 25.728184] br1690: port 1(eth1.1690) entered forwarding state
[ 25.824173] br1690: port 2(eoip1690) entered forwarding state
[ 514.943018] br1690: port 1(eth1.1690) entered disabled state
[ 517.263980] br1690: port 1(eth1.1690) entered forwarding state
[ 517.264005] br1690: port 1(eth1.1690) entered forwarding state
[ 532.288193] br1690: port 1(eth1.1690) entered forwarding state
[ 2593.513177] br1690: port 1(eth1.1690) entered disabled state
[ 2595.834212] br1690: port 1(eth1.1690) entered forwarding state
[ 2595.834235] br1690: port 1(eth1.1690) entered forwarding state
[ 2610.848047] br1690: port 1(eth1.1690) entered forwarding state
** Model information
not available
** Loaded modules:
tun
bridge
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ppdev
evdev
sha256_generic
padlock_sha
padlock_aes
snd_via82xx
snd_mpu401_uart
snd_rawmidi
snd_seq_device
psmouse
via_cputemp
hwmon_vid
snd_ac97_codec
serio_raw
via_rng
rng_core
snd_pcm
snd_timer
pcspkr
snd
soundcore
ac97_bus
i2c_viapro
gameport
i2c_core
parport_pc
parport
shpchp
button
processor
thermal_sys
nf_defrag_ipv4
8021q
garp
stp
mrp
llc
l2tp_eth
l2tp_netlink
l2tp_core
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
pata_via
ehci_pci
uhci_hcd
ehci_hcd
libata
via_rhine
mii
usbcore
usb_common
scsi_mod
e1000
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 91.226.50.110
netmask 255.255.255.252
gateway 91.226.50.109
dns-nameservers 217.17.34.10 8.8.8.8
pre-up ifconfig $IFACE up
post-down ifconfig $IFACE down
auto eth1
iface eth1 inet manual
pre-up ifconfig $IFACE up
post-down ifconfig $IFACE down
auto eth1.1690
iface eth1.1690 inet manual
pre-up ifconfig $IFACE up
post-down ifconfig $IFACE down
#auto br1690
#iface br1690 inet manual
# bridge_ports eth1.1690
# pre-up ifconfig $IFACE up
# post-down ifconfig $IFACE down
# bridge_stp off
# bridge_waitport 0
# bridge_fd 0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0e:0c:da:65:6e brd ff:ff:ff:ff:ff:ff
inet 91.226.50.110/30 brd 91.226.50.111 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::20e:cff:feda:656e/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:e0:c5:48:92:31 brd ff:ff:ff:ff:ff:ff
inet6 fe80::2e0:c5ff:fe48:9231/64 scope link
valid_lft forever preferred_lft forever
4: eth1.1690@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1690 state UP group default
link/ether 00:e0:c5:48:92:31 brd ff:ff:ff:ff:ff:ff
inet6 fe80::2e0:c5ff:fe48:9231/64 scope link
valid_lft forever preferred_lft forever
5: br1690: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 00:e0:c5:48:92:31 brd ff:ff:ff:ff:ff:ff
inet 10.236.83.97/30 scope global br1690
valid_lft forever preferred_lft forever
inet6 fe80::2e0:c5ff:fe48:9231/64 scope link
valid_lft forever preferred_lft forever
6: eoip1690: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br1690 state UNKNOWN group default qlen 500
link/ether e6:e5:6a:00:02:0d brd ff:ff:ff:ff:ff:ff
inet6 fe80::e4e5:6aff:fe00:20d/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 51744 464 0 0 0 0 0 0 51744 464 0 0 0 0 0 0
eth1.1690: 9340 125 0 0 0 0 0 42 159365 1573 0 0 0 0 0 0
eth0: 5250627 25332 0 0 0 0 0 0 4109542 20012 0 0 0 0 0 0
eth1: 12910 147 0 22 0 249513 0 0 166525 1583 0 0 0 0 0 0
eoip1690: 79029 567 0 0 0 0 0 0 18328 380 0 0 0 0 0 0
br1690: 75547 581 0 0 0 0 0 0 79538 997 0 0 0 0 0 0
*** Protocol statistics:
Ip:
19808 total packets received
0 forwarded
0 incoming packets discarded
19766 incoming packets delivered
21087 requests sent out
722 outgoing packets dropped
Icmp:
4166 ICMP messages received
3 input ICMP message failed.
ICMP input histogram:
destination unreachable: 459
echo requests: 3624
echo replies: 83
5251 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 500
echo request: 1127
echo replies: 3624
IcmpMsg:
InType0: 83
InType3: 459
InType8: 3624
OutType0: 3624
OutType3: 500
OutType8: 1127
Tcp:
4 active connections openings
704 passive connection openings
6 failed connection attempts
15 connection resets received
1 connections established
13874 segments received
14472 segments send out
373 segments retransmited
0 bad segments received.
43 resets sent
Udp:
772 packets received
44 packets to unknown port received.
0 packet receive errors
774 packets sent
UdpLite:
TcpExt:
1 invalid SYN cookies received
6 resets received for embryonic SYN_RECV sockets
26 TCP sockets finished time wait in fast timer
1353 delayed acks sent
Quick ack mode was activated 47 times
5 packets directly queued to recvmsg prequeue.
2641 packet headers predicted
3359 acknowledgments not containing data payload received
1287 predicted acknowledgments
73 times recovered from packet loss by selective acknowledgements
3 congestion windows recovered without slow start by DSACK
1 timeouts after SACK recovery
73 fast retransmits
1 forward retransmits
4 retransmits in slow start
86 other TCP timeouts
TCPLossProbes: 192
TCPLossProbeRecovery: 117
9 SACK retransmits failed
95 DSACKs sent for old packets
4 DSACKs received
1 DSACKs for out of order packets received
1 connections reset due to early user close
TCPSackShiftFallback: 162
TCPRcvCoalesce: 279
TCPOFOQueue: 300
TCPAutoCorking: 860
TCPSynRetrans: 52
TCPOrigDataSent: 8141
IpExt:
InBcastPkts: 343
InOctets: 4694675
OutOctets: 3752494
InBcastOctets: 51266
InNoECTPkts: 19979
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314]
Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: f0000000-f3ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6020000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ec00 [size=64]
[virtual] Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: e1000
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ed00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e900 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at ea00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.3 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at eb00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.4 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 Controller [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f6061000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci-pci
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard [1106:3227]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: VIA Technologies, Inc. K7VT2 motherboard [1106:4161]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_via82xx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 [1106:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at f6060000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] [1106:3344] (rev 01) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] [1106:3344]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f5000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.16-2-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16-2-686-pae recommends:
ii firmware-linux-free 3.3
ii libc6-i686 2.19-11
Versions of packages linux-image-3.16-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-686-pae/postinst/mips-initrd-3.16-2-686-pae:
linux-image-3.16-2-686-pae/postinst/depmod-error-initrd-3.16-2-686-pae: false
linux-image-3.16-2-686-pae/prerm/removing-running-kernel-3.16-2-686-pae: true
Reply to: