[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#763155: linux-image-3.16-2-686-pae: linux 3.16-2-686-pae: i915 module crashes on Eeepc 1001p



Package: src:linux
Version: 3.16.3-2
Severity: important

Dear Maintainer, after upgrade to kernel 3.16, i915 module stopped working
resulting in black screen immediately after i915 is loaded during boot.

There is also similar Archlinux bug report: https://bugs.archlinux.org/task/42036

Relevant part of journal:

Sep 28 12:54:23 hostname kernel: ACPI Warning: SystemIO range 0x00000828-0x0000082f conflicts with OpRegion 0x00000800-0x0000087f (\PMIO) (20140424/utaddress-258)
Sep 28 12:54:23 hostname kernel: ACPI Warning: SystemIO range 0x00000828-0x0000082f conflicts with OpRegion 0x00000828-0x0000082f (\_SB_.PCI0.SBRG.IELK.GPSE) (20140424/utaddress-258)
Sep 28 12:54:23 hostname kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 28 12:54:23 hostname kernel: ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bf (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-258)
Sep 28 12:54:23 hostname kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 28 12:54:23 hostname kernel: ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bf (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-258)
Sep 28 12:54:23 hostname kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 28 12:54:23 hostname kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Sep 28 12:54:23 hostname kernel: [drm] Initialized drm 1.1.0 20060810
Sep 28 12:54:23 hostname kernel: ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\SMRG) (20140424/utaddress-258)
Sep 28 12:54:23 hostname kernel: ACPI Warning: SystemIO range 0x00000400-0x0000041f conflicts with OpRegion 0x00000400-0x0000040f (\_SB_.PCI0.SBRG.SMRG) (20140424/utaddress-258)
Sep 28 12:54:23 hostname kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 28 12:54:23 hostname kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep 28 12:54:23 hostname kernel: [drm] Memory usable by graphics device = 512M
Sep 28 12:54:23 hostname kernel: [drm] Replacing VGA console driver
Sep 28 12:54:23 hostname kernel: Console: switching to colour dummy device 80x25
Sep 28 12:54:23 hostname kernel: i915 0000:00:02.0: irq 44 for MSI/MSI-X
Sep 28 12:54:23 hostname kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Sep 28 12:54:23 hostname kernel: [drm] Driver supports precise vblank timestamp query.
Sep 28 12:54:23 hostname kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Sep 28 12:54:24 hostname kernel: ------------[ cut here ]------------
Sep 28 12:54:24 hostname kernel: kernel BUG at /build/linux-Lep8DD/linux-3.16.3/drivers/gpu/drm/i915/i915_gem_stolen.c:431!
Sep 28 12:54:24 hostname kernel: invalid opcode: 0000 [#1] SMP 
Sep 28 12:54:24 hostname kernel: Modules linked in: snd_hda_controller i915(+) shpchp snd_hda_codec i2c_i801 snd_hwdep drm_kms_helper psmouse evdev serio_raw snd_pcm_oss snd_mixer_oss snd_pcm drm lpc_ich mfd_core snd_timer snd soundcore wmi ac i2c_algo_bit i2c_core video battery sparse_keymap rfkill button acpi_cpufreq processor coretemp loop fuse autofs4 ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore atl1c usb_common thermal thermal_sys
Sep 28 12:54:24 hostname kernel: CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 3.16-2-686-pae #1 Debian 3.16.3-2
Sep 28 12:54:24 hostname kernel: Hardware name: ASUSTeK Computer INC. 1001P/1005P, BIOS 1202    06/23/2010
Sep 28 12:54:24 hostname kernel: task: f774b010 ti: f4094000 task.ti: f4094000
Sep 28 12:54:24 hostname kernel: EIP: 0060:[<f87e80db>] EFLAGS: 00010206 CPU: 0
Sep 28 12:54:24 hostname kernel: EIP is at i915_gem_object_create_stolen_for_preallocated+0x20b/0x280 [i915]
Sep 28 12:54:24 hostname kernel: EAX: f46f1c00 EBX: f2c5c150 ECX: 001d4c00 EDX: 001d4c00
Sep 28 12:54:24 hostname kernel: ESI: f2c58000 EDI: 001d4c00 EBP: f4095b60 ESP: f4095b38
Sep 28 12:54:24 hostname kernel:  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Sep 28 12:54:24 hostname kernel: CR0: 80050033 CR2: b6f431a8 CR3: 36e14000 CR4: 000007f0
Sep 28 12:54:24 hostname kernel: Stack:
Sep 28 12:54:24 hostname kernel:  f4095b4c 00000282 f2c58004 00000001 00000001 f46f1c00 001d4c00 f4481000
Sep 28 12:54:24 hostname kernel:  f46f1c00 f4095bd4 f4095be0 f881726b 00139000 00071024 f4095ba8 f87f0e4b
Sep 28 12:54:24 hostname kernel:  00000001 f46f1c00 f2c58000 f46f1de4 00000002 f46f1e00 00000000 00000000
Sep 28 12:54:24 hostname kernel: Call Trace:
Sep 28 12:54:24 hostname kernel:  [<f881726b>] ? intel_modeset_init+0x82b/0x1210 [i915]
Sep 28 12:54:24 hostname kernel:  [<f87f0e4b>] ? i915_enable_pipestat+0xab/0x120 [i915]
Sep 28 12:54:24 hostname kernel:  [<f8840995>] ? i915_driver_load+0xae5/0xed0 [i915]
Sep 28 12:54:24 hostname kernel:  [<f883dd10>] ? i915_switcheroo_set_state+0x90/0x90 [i915]
Sep 28 12:54:24 hostname kernel:  [<c137f4c0>] ? powercap_register_control_type+0x1c0/0x1c0
Sep 28 12:54:24 hostname kernel:  [<c1251150>] ? cleanup_uevent_env+0x10/0x10
Sep 28 12:54:24 hostname kernel:  [<c133a744>] ? get_device+0x14/0x30
Sep 28 12:54:24 hostname kernel:  [<c146e4cb>] ? klist_node_init+0x2b/0x40
Sep 28 12:54:24 hostname kernel:  [<c146e536>] ? klist_add_tail+0x16/0x30
Sep 28 12:54:24 hostname kernel:  [<c133baf6>] ? device_add+0x1d6/0x5a0
Sep 28 12:54:24 hostname kernel:  [<f86255ae>] ? drm_dev_register+0x8e/0xe0 [drm]
Sep 28 12:54:24 hostname kernel:  [<f8627b79>] ? drm_get_pci_dev+0x79/0x1c0 [drm]
Sep 28 12:54:24 hostname kernel:  [<c128482f>] ? pci_device_probe+0x6f/0xc0
Sep 28 12:54:24 hostname kernel:  [<c11ca275>] ? sysfs_create_link+0x25/0x40
Sep 28 12:54:24 hostname kernel:  [<c133e583>] ? driver_probe_device+0x93/0x3a0
Sep 28 12:54:24 hostname kernel:  [<c11c9fa7>] ? sysfs_create_dir_ns+0x37/0x80
Sep 28 12:54:24 hostname kernel:  [<c1284771>] ? pci_match_device+0xc1/0xe0
Sep 28 12:54:24 hostname kernel:  [<c133e941>] ? __driver_attach+0x71/0x80
Sep 28 12:54:24 hostname kernel:  [<c133e8d0>] ? __device_attach+0x40/0x40
Sep 28 12:54:24 hostname kernel:  [<c133ca57>] ? bus_for_each_dev+0x47/0x80
Sep 28 12:54:24 hostname kernel:  [<c133e08e>] ? driver_attach+0x1e/0x20
Sep 28 12:54:24 hostname kernel:  [<c133e8d0>] ? __device_attach+0x40/0x40
Sep 28 12:54:24 hostname kernel:  [<c133dce7>] ? bus_add_driver+0x157/0x230
Sep 28 12:54:24 hostname kernel:  [<f887e000>] ? 0xf887dfff
Sep 28 12:54:24 hostname kernel:  [<c133f009>] ? driver_register+0x59/0xe0
Sep 28 12:54:24 hostname kernel:  [<c1002132>] ? do_one_initcall+0xc2/0x1f0
Sep 28 12:54:24 hostname kernel:  [<f887e000>] ? 0xf887dfff
Sep 28 12:54:24 hostname kernel:  [<f87c2000>] ? 0xf87c1fff
Sep 28 12:54:24 hostname kernel:  [<c1148ee8>] ? __vunmap+0x88/0xf0
Sep 28 12:54:24 hostname kernel:  [<c1148ee8>] ? __vunmap+0x88/0xf0
Sep 28 12:54:24 hostname kernel:  [<c10c0e2b>] ? load_module+0x1cab/0x2380
Sep 28 12:54:24 hostname kernel:  [<c10c1665>] ? SyS_finit_module+0x75/0xc0
Sep 28 12:54:24 hostname kernel:  [<c112ec4b>] ? vm_mmap_pgoff+0x7b/0xa0
Sep 28 12:54:24 hostname kernel:  [<c147971f>] ? sysenter_do_call+0x12/0x12
Sep 28 12:54:24 hostname kernel: Code: 08 89 54 24 08 c7 44 24 04 80 7f 85 f8 c7 04 24 a0 a2 84 f8 89 44 24 10 8b 45 f0 89 44 24 0c e8 5c d0 e3 ff e9 2b fe ff ff 0f 0b <0f> 0b b8 34 7d 85 f8 ba b2 01 00 00 e8 84 e8 86 c8 31 c0 e9 05
Sep 28 12:54:24 hostname kernel: EIP: [<f87e80db>] i915_gem_object_create_stolen_for_preallocated+0x20b/0x280 [i915] SS:ESP 0068:f4095b38
Sep 28 12:54:24 hostname kernel: ---[ end trace e796cb237f64e9fc ]---



-- Package-specific info:
** Version:
Linux version 3.16-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-686-pae root=UUID=e87c9dfc-aa0c-4868-aa90-1dee5b325ab2 ro acpi_backlight=vendor quiet

** Tainted: DO (4224)
 * Kernel has oopsed before.
 * Out-of-tree module has been loaded.

** Kernel log:
[   17.948958] Hardware name: ASUSTeK Computer INC. 1001P/1005P, BIOS 1202    06/23/2010
[   17.948973] task: f774b010 ti: f4094000 task.ti: f4094000
[   17.948985] EIP: 0060:[<f87e80db>] EFLAGS: 00010206 CPU: 0
[   17.949069] EIP is at i915_gem_object_create_stolen_for_preallocated+0x20b/0x280 [i915]
[   17.949092] EAX: f46f1c00 EBX: f2c5c150 ECX: 001d4c00 EDX: 001d4c00
[   17.949109] ESI: f2c58000 EDI: 001d4c00 EBP: f4095b60 ESP: f4095b38
[   17.949125]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   17.949140] CR0: 80050033 CR2: b6f431a8 CR3: 36e14000 CR4: 000007f0
[   17.949155] Stack:
[   17.949165]  f4095b4c 00000282 f2c58004 00000001 00000001 f46f1c00 001d4c00 f4481000
[   17.949198]  f46f1c00 f4095bd4 f4095be0 f881726b 00139000 00071024 f4095ba8 f87f0e4b
[   17.949229]  00000001 f46f1c00 f2c58000 f46f1de4 00000002 f46f1e00 00000000 00000000
[   17.949263] Call Trace:
[   17.949360]  [<f881726b>] ? intel_modeset_init+0x82b/0x1210 [i915]
[   17.949449]  [<f87f0e4b>] ? i915_enable_pipestat+0xab/0x120 [i915]
[   17.949556]  [<f8840995>] ? i915_driver_load+0xae5/0xed0 [i915]
[   17.949656]  [<f883dd10>] ? i915_switcheroo_set_state+0x90/0x90 [i915]
[   17.949684]  [<c137f4c0>] ? powercap_register_control_type+0x1c0/0x1c0
[   17.949706]  [<c1251150>] ? cleanup_uevent_env+0x10/0x10
[   17.949732]  [<c133a744>] ? get_device+0x14/0x30
[   17.949752]  [<c146e4cb>] ? klist_node_init+0x2b/0x40
[   17.949771]  [<c146e536>] ? klist_add_tail+0x16/0x30
[   17.949790]  [<c133baf6>] ? device_add+0x1d6/0x5a0
[   17.949825]  [<f86255ae>] ? drm_dev_register+0x8e/0xe0 [drm]
[   17.949858]  [<f8627b79>] ? drm_get_pci_dev+0x79/0x1c0 [drm]
[   17.949880]  [<c128482f>] ? pci_device_probe+0x6f/0xc0
[   17.949902]  [<c11ca275>] ? sysfs_create_link+0x25/0x40
[   17.949922]  [<c133e583>] ? driver_probe_device+0x93/0x3a0
[   17.949941]  [<c11c9fa7>] ? sysfs_create_dir_ns+0x37/0x80
[   17.949960]  [<c1284771>] ? pci_match_device+0xc1/0xe0
[   17.949978]  [<c133e941>] ? __driver_attach+0x71/0x80
[   17.949994]  [<c133e8d0>] ? __device_attach+0x40/0x40
[   17.950012]  [<c133ca57>] ? bus_for_each_dev+0x47/0x80
[   17.950030]  [<c133e08e>] ? driver_attach+0x1e/0x20
[   17.950047]  [<c133e8d0>] ? __device_attach+0x40/0x40
[   17.950064]  [<c133dce7>] ? bus_add_driver+0x157/0x230
[   17.950094]  [<f887e000>] ? 0xf887dfff
[   17.950113]  [<c133f009>] ? driver_register+0x59/0xe0
[   17.950133]  [<c1002132>] ? do_one_initcall+0xc2/0x1f0
[   17.950152]  [<f887e000>] ? 0xf887dfff
[   17.950170]  [<f87c2000>] ? 0xf87c1fff
[   17.950188]  [<c1148ee8>] ? __vunmap+0x88/0xf0
[   17.950204]  [<c1148ee8>] ? __vunmap+0x88/0xf0
[   17.950223]  [<c10c0e2b>] ? load_module+0x1cab/0x2380
[   17.950253]  [<c10c1665>] ? SyS_finit_module+0x75/0xc0
[   17.950273]  [<c112ec4b>] ? vm_mmap_pgoff+0x7b/0xa0
[   17.950305]  [<c147971f>] ? sysenter_do_call+0x12/0x12
[   17.950319] Code: 08 89 54 24 08 c7 44 24 04 80 7f 85 f8 c7 04 24 a0 a2 84 f8 89 44 24 10 8b 45 f0 89 44 24 0c e8 5c d0 e3 ff e9 2b fe ff ff 0f 0b <0f> 0b b8 34 7d 85 f8 ba b2 01 00 00 e8 84 e8 86 c8 31 c0 e9 05
[   17.950467] EIP: [<f87e80db>] i915_gem_object_create_stolen_for_preallocated+0x20b/0x280 [i915] SS:ESP 0068:f4095b38
[   17.950569] ---[ end trace e796cb237f64e9fc ]---
[   18.487331] cfg80211: Calling CRDA to update world regulatory domain
[   18.528399] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 570166
[   18.598557] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   19.430001] asus_wmi: ASUS WMI generic driver loaded
[   19.436177] asus_wmi: Initialization: 0x0
[   19.436308] asus_wmi: BIOS WMI version: 0.6
[   19.436532] asus_wmi: SFUN value: 0x0
[   19.437995] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[   19.558166] asus_wmi: Disabling ACPI video driver
[   19.613738] ath: phy0: ASPM enabled: 0x42
[   19.613754] ath: EEPROM regdomain: 0x60
[   19.613762] ath: EEPROM indicates we should expect a direct regpair map
[   19.613773] ath: Country alpha2 being used: 00
[   19.613781] ath: Regpair used: 0x60
[   19.711431] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.712487] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf89a0000, irq=17
[   19.786544] iTCO_vendor_support: vendor-support=0
[   19.790947] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   19.791059] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[   19.791543] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.177095] media: Linux media interface: v0.10
[   20.198104] Linux video capture interface: v2.00
[   20.363420] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5119)
[   20.369601] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input8
[   20.369942] usbcore: registered new interface driver uvcvideo
[   20.369960] USB Video Class driver (1.1.1)
[   21.525157] Adding 2096476k swap on /dev/sda2.  Priority:-1 extents:1 across:2096476k FS
[   36.423579] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   36.847646] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl
[   36.879638] systemd-journald[132]: Received request to flush runtime journal from PID 1
[   39.280079] systemd[1]: Unit batthalt.service entered failed state.
[   39.720472] vboxdrv: Found 2 processor cores.
[   39.721024] vboxdrv: fAsync=0 offMin=0x19a offMax=0x8b6
[   39.721378] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   39.721402] vboxdrv: Successfully loaded version 4.3.14_Debian (interface 0x001a0007).
[   43.175490] vboxpci: IOMMU not found (not compiled)
[   50.999832] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[   51.017459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   51.040325] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   53.261795] wlan0: authenticate with f4:6d:04:c2:cc:1c
[   53.268580] wlan0: direct probe to f4:6d:04:c2:cc:1c (try 1/3)
[   53.472066] wlan0: send auth to f4:6d:04:c2:cc:1c (try 2/3)
[   53.473877] wlan0: authenticated
[   53.474388] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   53.476134] wlan0: associate with f4:6d:04:c2:cc:1c (try 1/3)
[   53.478764] wlan0: RX AssocResp from f4:6d:04:c2:cc:1c (capab=0x411 status=0 aid=3)
[   53.478897] wlan0: associated
[   53.478971] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.479082] cfg80211: Calling CRDA to update world regulatory domain
[   54.478942] IPv6: wlan0: IPv6 duplicate address fe80::1e4b:d6ff:fec0:aedb detected!

** Model information
not available

** Loaded modules:
cpufreq_powersave
pci_stub
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
iTCO_wdt
iTCO_vendor_support
arc4
ath9k
ath9k_common
joydev
eeepc_wmi
asus_wmi
ath9k_hw
ath
mac80211
cfg80211
snd_hda_intel
snd_hda_controller
i915
shpchp
snd_hda_codec
i2c_i801
snd_hwdep
drm_kms_helper
psmouse
evdev
serio_raw
snd_pcm_oss
snd_mixer_oss
snd_pcm
drm
lpc_ich
mfd_core
snd_timer
snd
soundcore
wmi
ac
i2c_algo_bit
i2c_core
video
battery
sparse_keymap
rfkill
button
acpi_cpufreq
processor
coretemp
loop
fuse
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ahci
libahci
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
usbcore
atl1c
usb_common
thermal
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010]
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at dc00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012]
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 4
	Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 80000000-801fffff
	Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f8000000-fbffffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f7f00000-f7ffffff
	Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at d400 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at d480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at d880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 43
	Region 0: I/O ports at d080 [size=8]
	Region 1: I/O ports at d000 [size=4]
	Region 2: I/O ports at cc00 [size=8]
	Region 3: I/O ports at c880 [size=4]
	Region 4: I/O ports at c800 [size=32]
	Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet [1969:1062] (rev c0)
	Subsystem: ASUSTeK Computer Inc. Device [1043:838a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at ec00 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: atl1c

02:00.0 Network controller [0280]: Qualcomm Atheros AR2427 802.11bg Wireless Network Adapter (PCI-Express) [168c:002c] (rev 01)
	Subsystem: AzureWave Device [1a3b:1112]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k


** USB devices:
Bus 002 Device 002: ID 13d3:5119 IMC Networks 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (900, 'testing'), (400, 'unstable'), (300, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.16-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8@ISO, LC_CTYPE=en_US.UTF-8@ISO (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.16-2-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.116
ii  kmod                                    18-2
ii  linux-base                              3.5
ii  module-init-tools                       18-2

Versions of packages linux-image-3.16-2-686-pae recommends:
ii  firmware-linux-free  3.3
ii  libc6-i686           2.19-11

Versions of packages linux-image-3.16-2-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16-2-686-pae is related to:
ii  firmware-atheros        0.43
ii  firmware-bnx2           0.43
ii  firmware-bnx2x          0.43
ii  firmware-brcm80211      0.43
ii  firmware-intelwimax     0.43
ii  firmware-ipw2x00        0.43
ii  firmware-ivtv           0.43
ii  firmware-iwlwifi        0.43
ii  firmware-libertas       0.43
ii  firmware-linux          0.43
ii  firmware-linux-nonfree  0.43
ii  firmware-myricom        0.43
ii  firmware-netxen         0.43
ii  firmware-qlogic         0.43
ii  firmware-ralink         0.43
ii  firmware-realtek        0.43
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16-2-686-pae/prerm/removing-running-kernel-3.16-2-686-pae: true
  linux-image-3.16-2-686-pae/postinst/depmod-error-initrd-3.16-2-686-pae: false
  linux-image-3.16-2-686-pae/postinst/mips-initrd-3.16-2-686-pae:


Reply to: