[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#741079: marked as done (linux-image-3.13-1-686-pae: Stack trace when unplugging usb devices)

Your message dated Wed, 24 Sep 2014 13:43:05 +0100
with message-id <1411562585.3659.30.camel@decadent.org.uk>
and subject line Re: linux-image-3.13-1-686-pae: Stack trace when unplugging usb devices
has caused the Debian Bug report #741079,
regarding linux-image-3.13-1-686-pae: Stack trace when unplugging usb devices
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
741079: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=741079
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.13.5-1
Severity: normal

Dear Maintainer,

When unplugging usb devices I have a stack trace. I tried an external usb disk, and a wifi dongle.
The message present in both cases is : warn_slowpath_common...
Note that I've moved from 3.11 to 3.13. I haven't used 3.12

Regards

nb


-- Package-specific info:
** Version:
Linux version 3.13-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)

** Command line:
BOOT_IMAGE=/vmlinuz-3.13-1-686-pae root=UUID=ae9930fd-764c-4354-901c-0abaf3657eb0 ro quiet

** Tainted: WO (4608)
 * Taint on warning.
 * Out-of-tree module has been loaded.

** Kernel log:
[51572.170508]  [<c14161f7>] ? ret_from_kernel_thread+0x1b/0x28
[51572.170516]  [<c1068bd0>] ? kthread_create_on_node+0x110/0x110
[51572.170522] ---[ end trace 8c972f800d5df207 ]---
[51740.164059] usb 5-1: new high-speed USB device number 55 using ehci-pci
[51740.297207] usb 5-1: New USB device found, idVendor=7392, idProduct=a811
[51740.297228] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[51740.297236] usb 5-1: Product: 802.11n WLAN Adapter
[51740.297243] usb 5-1: Manufacturer: Realtek
[51740.297249] usb 5-1: SerialNumber: 00e04c000001
[51740.874130] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51746.127024] RTL871X: set ssid [belkin.92e.5GHz] fw_state=0x00000008
[51746.427442] RTL871X: start auth
[51746.430511] RTL871X: auth success, start assoc
[51746.432673] RTL871X: assoc success
[51746.432759] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[51746.435382] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[51746.435382] 	 ==> rssi_level:0, rate_bitmap:0x000ff010
[51746.450049] RTL871X: send eapol packet
[51746.461143] RTL871X: send eapol packet
[51746.462871] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
[51746.462880] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
[51746.886607] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[51746.886607] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[51769.309148] ------------[ cut here ]------------
[51769.309196] WARNING: CPU: 0 PID: 27157 at /build/linux-ncyRvS/linux-3.13.5/net/wireless/sme.c:854 __cfg80211_disconnected+0x227/0x230 [cfg80211]()
[51769.309212] Modules linked in: usb_storage pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) snd_hrtimer cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative rfcomm bnep binfmt_misc vboxdrv(O) synaptics_i2c firewire_sbp2 loop fuse parport_pc ppdev lp parport 8812au(O) hid_generic btusb bluetooth usbhid hid joydev gspca_m5602 gspca_main videodev media cfg80211 evdev pcspkr psmouse pcmcia serio_raw r852 sm_common yenta_socket nand pcmcia_rsrc nand_ecc pcmcia_core r592 nand_ids mtd memstick lpc_ich mfd_core rng_core snd_hda_codec_realtek asus_laptop acpi_cpufreq i915 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sparse_keymap snd_page_alloc rfkill ac battery video processor button input_polldev drm_kms_helper drm i2c_algo_bit i2c_core snd_seq snd_seq_device snd_timer snd soundcore ext4 crc16 mbcache jbd2 sg sd_mod sr_mod crc_t10dif crct10dif_common cdrom ata_generic ata_piix firewire_ohci sdhci_pci sdhci firewire_core crc_itu_t 8139too 8139cp mii mmc_core ehci_pci the
 rmal libata scsi_mod fan uhci_hcd ehci_hcd thermal_sys usbcore usb_common
[51769.309388] CPU: 0 PID: 27157 Comm: kworker/u2:2 Tainted: G        W  O 3.13-1-686-pae #1 Debian 3.13.5-1
[51769.309394] Hardware name: ASUSTeK Computer Inc.         W5A       /W5A       , BIOS 0209                                11/17/2005
[51769.309412] Workqueue: cfg80211 cfg80211_event_work [cfg80211]
[51769.309418]  00000009 c140b038 00000000 c104d41e c14d7898 00000000 00006a15 f88d3554
[51769.309432]  00000356 f88b7277 f88b7277 c9d787a8 00000000 00000000 f35f4d20 c104d4db
[51769.309445]  00000009 00000000 f88b7277 00000000 00002f15 c163c380 f3646000 d3dd5000
[51769.309458] Call Trace:
[51769.309472]  [<c140b038>] ? dump_stack+0x3e/0x4e
[51769.309482]  [<c104d41e>] ? warn_slowpath_common+0x7e/0xa0
[51769.309506]  [<f88b7277>] ? __cfg80211_disconnected+0x227/0x230 [cfg80211]
[51769.309528]  [<f88b7277>] ? __cfg80211_disconnected+0x227/0x230 [cfg80211]
[51769.309536]  [<c104d4db>] ? warn_slowpath_null+0x1b/0x20
[51769.309557]  [<f88b7277>] ? __cfg80211_disconnected+0x227/0x230 [cfg80211]
[51769.309568]  [<c107e7db>] ? idle_balance+0xab/0x210
[51769.309588]  [<f8898d0d>] ? cfg80211_process_wdev_events+0xed/0x170 [cfg80211]
[51769.309609]  [<f8898dbf>] ? cfg80211_process_rdev_events+0x2f/0x90 [cfg80211]
[51769.309628]  [<f8895013>] ? cfg80211_event_work+0x13/0x20 [cfg80211]
[51769.309638]  [<c106324f>] ? process_one_work+0xff/0x370
[51769.309646]  [<c1062b65>] ? destroy_worker+0x65/0x90
[51769.309655]  [<c1063b66>] ? manage_workers.isra.28+0x196/0x240
[51769.309664]  [<c1063d09>] ? worker_thread+0xf9/0x330
[51769.309672]  [<c1063c10>] ? manage_workers.isra.28+0x240/0x240
[51769.309680]  [<c1068c6e>] ? kthread+0x9e/0xc0
[51769.309692]  [<c14161f7>] ? ret_from_kernel_thread+0x1b/0x28
[51769.309700]  [<c1068bd0>] ? kthread_create_on_node+0x110/0x110
[51769.309706] ---[ end trace 8c972f800d5df208 ]---
[51773.451292] RTL871X: nolinked power save enter
[51773.727741] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[51774.213875] RTL871X: nolinked power save leave
[51778.322321] RTL871X: set ssid [belkin.92e.5GHz] fw_state=0x00000008
[51778.580963] RTL871X: start auth
[51778.583432] RTL871X: auth success, start assoc
[51778.585464] RTL871X: assoc success
[51778.586225] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[51778.588671] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[51778.588671] 	 ==> rssi_level:0, rate_bitmap:0x000ff010
[51778.599985] RTL871X: send eapol packet
[51778.610855] RTL871X: send eapol packet
[51778.614671] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
[51778.614683] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
[51779.218628] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[51779.218628] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[52534.734396] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[52534.734396] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[52544.754445] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[52544.754445] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[55141.938788] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[55141.938788] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[56228.098253] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56228.098253] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[56266.182480] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56266.182480] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[56368.386501] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56368.386501] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[56398.446412] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56398.446412] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[56446.542440] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56446.542440] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[56458.558356] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56458.558356] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[56466.582420] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[56466.582420] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[57542.726317] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[57542.726317] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[57546.742401] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[57546.742401] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[58117.882397] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[58117.882397] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[58127.902696] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[58127.902696] 	 ==> rssi_level:1, rate_bitmap:0x000f0000
[58658.962668] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[58658.962668] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
[58705.054409] UpdateHalRAMask8812A => mac_id:0, networkType:0x14, mask:0x000ffff0
[58705.054409] 	 ==> rssi_level:1, rate_bitmap:0x000f0000

** Model information
not available

** Loaded modules:
usb_storage
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
snd_hrtimer
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
rfcomm
bnep
binfmt_misc
vboxdrv(O)
synaptics_i2c
firewire_sbp2
loop
fuse
parport_pc
ppdev
lp
parport
8812au(O)
hid_generic
btusb
bluetooth
usbhid
hid
joydev
gspca_m5602
gspca_main
videodev
media
cfg80211
evdev
pcspkr
psmouse
pcmcia
serio_raw
r852
sm_common
yenta_socket
nand
pcmcia_rsrc
nand_ecc
pcmcia_core
r592
nand_ids
mtd
memstick
lpc_ich
mfd_core
rng_core
snd_hda_codec_realtek
asus_laptop
acpi_cpufreq
i915
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
sparse_keymap
snd_page_alloc
rfkill
ac
battery
video
processor
button
input_polldev
drm_kms_helper
drm
i2c_algo_bit
i2c_core
snd_seq
snd_seq_device
snd_timer
snd
soundcore
ext4
crc16
mbcache
jbd2
sg
sd_mod
sr_mod
crc_t10dif
crct10dif_common
cdrom
ata_generic
ata_piix
firewire_ohci
sdhci_pci
sdhci
firewire_core
crc_itu_t
8139too
8139cp
mii
mmc_core
ehci_pci
thermal
libata
scsi_mod
fan
uhci_hcd
ehci_hcd
thermal_sys
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=09 <?>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1882]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at ec00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at feb40000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1882]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c3]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at feb38000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0100c  Data: 41a1
	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag- RBE-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=80
			Status:	NegoPending- InProgress-
	Capabilities: [130 v1] Root Complex Link
		Desc:	PortNumber=05 ComponentID=02 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000fed1c000
	Kernel driver in use: snd_hda_intel

00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e400 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at e880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at feb3fc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=05, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Device [0000:0000]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at ffa0 [size=16]
	Kernel driver in use: ata_piix

01:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at 54000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 50000000-53ffffff (prefetchable)
	Memory window 1: 58000000-5bffffff
	I/O window 0: 0000d000-0000d0ff
	I/O window 1: 0000d400-0000d4ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
		Bridge: PM- B3+
	Kernel driver in use: yenta_cardbus

01:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at fe8fd800 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
	Kernel driver in use: firewire_ohci

01:03.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: sdhci-pci

01:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at fe8fe400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: r592

01:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device [1043:10c7]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at fe8fe800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: r852

01:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
	Subsystem: ASUSTeK Computer Inc. L8400B or L3C/S notebook [1043:1045]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at d800 [size=256]
	Region 1: Memory at fe8fec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: 8139too

01:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
	Subsystem: Intel Corporation WM3B2300BG Mini-PCI Card [8086:2701]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-


** USB devices:
Bus 005 Device 055: ID 7392:a811 Edimax Technology Co., Ltd 
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0402:5602 ALi Corp. M5602 Video Camera Controller
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 044e:3001 Alps Electric Co., Ltd UGTZ4 Bluetooth
Bus 003 Device 002: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 3.13-1-686-pae (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.13-1-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.52
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    16-2
ii  linux-base                              3.5
ii  module-init-tools                       16-2

Versions of packages linux-image-3.13-1-686-pae recommends:
ii  firmware-linux-free  3.3
ii  libc6-i686           2.18-4

Versions of packages linux-image-3.13-1-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
ii  lilo                    1:24.0-2
pn  linux-doc-3.13          <none>

Versions of packages linux-image-3.13-1-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
ii  firmware-ipw2x00        0.41
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.41
ii  firmware-realtek        0.41
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.13-1-686-pae/postinst/depmod-error-initrd-3.13-1-686-pae: false
  linux-image-3.13-1-686-pae/prerm/removing-running-kernel-3.13-1-686-pae: true

--- End Message ---
--- Begin Message --- 
Version: 3.15~rc5-1~exp1

The patches for the SCSI layer were applied upstream in 3.15-rc1.  The
wifi issue appears to be specific to an out-of-tree driver, so it's not
our bug to fix.

Ben.

-- 
Ben Hutchings
Everything should be made as simple as possible, but not simpler.
                                                           - Albert Einstein

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: