Bug#762327: hda-intel: snd-hda-intel: mic input stops working after resuming from suspend to ram
Package: src:linux
Version: 3.14.15-2~bpo70+1
Severity: important
File: hda-intel
Dear Maintainer,
After last update using skype I've found mic input does not work after
resuming from suspend to ram on DELL E6430.
alsamixer settings check didn't help.
When I start "arecord" after resuming, it writes message:
"Suspended. Trying resume. Done."
and after that mic input becomes functional.
--Package-specific info:
** Version:
Linux version 3.14-0.bpo.2-686-pae (debian-kernel@lists.debian.org) (gcc
version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.14.15-2~bpo70+1
(2014-08-21)
** Command line:
BOOT_IMAGE=/vmlinuz-3.14-0.bpo.2-686-pae root=/dev/mapper/dellz-root ro
quiet
** Tainted: WO (4608)
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
[147161.684168] CPU2 is up
[147161.684225] smpboot: Booting Node 0 Processor 3 APIC 0x6
[147161.694900] CPU3 microcode updated early to revision 0x1b, date =
2014-05-29
[147161.694902] Initializing CPU#3
[147161.695988] CPU3: Thermal monitoring handled by SMI
[147161.696011] kvm: enabling virtualization on CPU3
[147161.698209] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
[147161.698218] Intel pstate controlling: cpu 3
[147161.698264] CPU3 is up
[147161.698320] smpboot: Booting Node 0 Processor 4 APIC 0x1
[147161.708992] CPU4 microcode updated early to revision 0x1b, date =
2014-05-29
[147161.708993] Initializing CPU#4
[147161.710174] CPU4: Thermal monitoring handled by SMI
[147161.710196] kvm: enabling virtualization on CPU4
[147161.712445] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x1b
[147161.712455] Intel pstate controlling: cpu 4
[147161.712500] CPU4 is up
[147161.712551] smpboot: Booting Node 0 Processor 5 APIC 0x3
[147161.722816] Initializing CPU#5
[147161.724264] CPU5: Thermal monitoring handled by SMI
[147161.724282] kvm: enabling virtualization on CPU5
[147161.726512] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x1b
[147161.726520] Intel pstate controlling: cpu 5
[147161.726560] CPU5 is up
[147161.726605] smpboot: Booting Node 0 Processor 6 APIC 0x5
[147161.736870] Initializing CPU#6
[147161.738341] CPU6: Thermal monitoring handled by SMI
[147161.738360] kvm: enabling virtualization on CPU6
[147161.740597] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x1b
[147161.740605] Intel pstate controlling: cpu 6
[147161.740644] CPU6 is up
[147161.740691] smpboot: Booting Node 0 Processor 7 APIC 0x7
[147161.750957] Initializing CPU#7
[147161.752439] CPU7: Thermal monitoring handled by SMI
[147161.752457] kvm: enabling virtualization on CPU7
[147161.754681] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x1b
[147161.754689] Intel pstate controlling: cpu 7
[147161.754729] CPU7 is up
[147161.761247] ACPI: Waking up from system sleep state S3
[147161.790456] dell_wmi: Received unknown WMI event (0x0)
[147161.811638] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[147161.859619] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[147161.891615] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[147161.939869] PM: noirq resume of devices complete after 159.108 msecs
[147161.939978] PM: early resume of devices complete after 0.085 msecs
[147161.940042] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[147161.940248] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[147161.949102] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[147161.949141] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[147161.965299] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
[147161.965300] PM: Device 00:09 failed to resume: error -19
[147162.151606] usb 1-1.5: reset high-speed USB device number 5 using
ehci-pci
[147162.291538] ata5: SATA link down (SStatus 0 SControl 300)
[147162.291564] ata6: SATA link down (SStatus 0 SControl 300)
[147162.299537] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[147162.304463] ata2.00: configured for UDMA/100
[147162.319593] usb 1-1.2: reset full-speed USB device number 3 using
ehci-pci
[147162.339551] i915: No ACPI video bus found
[147162.483579] usb 1-1.4: reset full-speed USB device number 4 using
ehci-pci
[147163.383434] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[147163.971380] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[147164.200416] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[147164.200421] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[147164.200424] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[147164.200642] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES)
succeeded
[147164.236547] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES)
succeeded
[147164.236551] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE
LOCK) filtered out
[147164.236555] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE
CONFIGURATION OVERLAY) filtered out
[147164.236733] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[147164.240682] ata1.00: configured for UDMA/133
[147164.255478] sd 0:0:0:0: [sda] Starting disk
[147164.271248] PM: resume of devices complete after 2331.544 msecs
[147164.271834] PM: Finishing wakeup.
[147164.271835] Restarting tasks ... done.
[147164.279475] video LNXVIDEO:00: Restoring backlight state
[147164.279478] video LNXVIDEO:01: Restoring backlight state
[147164.403418] bbswitch: disabling discrete graphics
[147164.403428] ACPI Warning: \_SB_.PCI0.PEG0.VID_._DSM: Argument #4
type mismatch - Found [Buffer], ACPI requires [Package]
(20131218/nsarguments-95)
[147165.790699] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[147165.891147] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[147165.891252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[147166.100715] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
enabled: false (implement)
[147166.100728] brcmsmac bcma0:0: brcms_ops_config: change power-save
mode: false (implement)
[147166.101324] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[147167.420753] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: Rx/Tx
[147167.420762] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[147167.420801] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[147167.955854] wlan0: authenticate with 00:1f:c6:43:39:42
[147167.958362] wlan0: send auth to 00:1f:c6:43:39:42 (try 1/3)
[147167.960032] wlan0: authenticated
[147167.960258] brcmsmac bcma0:0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[147167.960264] brcmsmac bcma0:0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[147167.962881] wlan0: associate with 00:1f:c6:43:39:42 (try 1/3)
[147167.965217] wlan0: RX AssocResp from 00:1f:c6:43:39:42 (capab=0x411
status=0 aid=1)
[147167.965821] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
associated
[147167.965825] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos
enabled: false (implement)
[147167.965834] wlan0: associated
[147167.965844] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[147168.647339] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp
filtering: 1 addresses (implement)
[147172.401153] dell_wmi: Received unknown WMI event (0x0)
** Model information
not available
** Loaded modules:
nls_utf8
nls_cp437
vfat
fat
usb_storage
tun
ctr
ccm
bbswitch(O)
ppdev
lp
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
rfcomm
bnep
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
cpufreq_powersave
loop
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
cfg80211
ssb
rng_core
x86_pkg_temp_thermal
intel_powerclamp
uvcvideo
videobuf2_vmalloc
videobuf2_memops
dell_wmi
sparse_keymap
i915
iTCO_wdt
iTCO_vendor_support
pcmcia
lpc_ich
videobuf2_core
mei_me
btusb
videodev
mei
drm_kms_helper
drm
i2c_algo_bit
bluetooth
mfd_core
media
intel_rapl
coretemp
i2c_i801
i2c_core
6lowpan_iphc
snd_hda_codec_idt
snd_hda_codec_generic
joydev
evdev
pcspkr
pcmcia_core
psmouse
serio_raw
bcma
kvm_intel
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
kvm
crc32_pclmul
crc32c_intel
aesni_intel
aes_i586
xts
lrw
gf128mul
ablk_helper
dell_laptop
rfkill
dcdbas
snd_seq
wmi
snd_seq_device
snd_timer
cryptd
video
processor
button
battery
ac
snd
parport_pc
parport
soundcore
ext4
crc16
mbcache
jbd2
dm_mod
sg
sd_mod
sr_mod
cdrom
crc_t10dif
crct10dif_common
hid_generic
usbhid
hid
ahci
libahci
libata
ehci_pci
xhci_hcd
ehci_hcd
sdhci_pci
sdhci
scsi_mod
e1000e
ptp
pps_core
mmc_core
usbcore
thermal
usb_common
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether f0:1f:af:6c:50:58 brd ff:ff:ff:ff:ff:ff
inet 192.168.197.6/24 brd 192.168.197.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::f21f:afff:fe6c:5058/64 scope link valid_lft
forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether 00:71:cc:61:6e:1e brd ff:ff:ff:ff:ff:ff
inet 192.168.197.33/24 brd 192.168.197.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::271:ccff:fe61:6e1e/64 scope link valid_lft
forever preferred_lft forever
5: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlan0: 1095024230 850977 0 0 0 0 0 0
85574458 605291 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
lo: 51794556 181734 0 0 0 0 0 0
51794556 181734 0 0 0 0 0 0
eth0: 960834422 1034509 0 0 0 0 0 104300
72746655 554590 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1758705 total packets received
9203 with invalid headers
315 with invalid addresses
0 forwarded
0 incoming packets discarded
1748437 incoming packets delivered
1168403 requests sent out
115 outgoing packets dropped
1662 dropped because of missing route
30 fragments received ok
66 fragments created
Icmp:
1564 ICMP messages received
5 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1555
echo replies: 9
772 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 754
echo request: 18
IcmpMsg:
InType0: 9
InType3: 1555
OutType3: 754
OutType8: 18
Tcp:
9586 active connections openings
35 passive connection openings
274 failed connection attempts
117 connection resets received
18 connections established
1008802 segments received
808256 segments send out
2048 segments retransmited
132 bad segments received.
9800 resets sent
InCsumErrors: 1
Udp:
686245 packets received
597 packets to unknown port received.
0 packet receive errors
364286 packets sent
SndbufErrors: 337
UdpLite:
TcpExt:
1 packets pruned from receive queue because of socket buffer overrun
2833 TCP sockets finished time wait in fast timer
47 packets rejects in established connections because of timestamp
7839 delayed acks sent
3 delayed acks further delayed because of locked socket
Quick ack mode was activated 2119 times
8 packets directly queued to recvmsg prequeue.
8 bytes directly received in process context from prequeue
822418 packet headers predicted
17460 acknowledgments not containing data payload received
30449 predicted acknowledgments
13 times recovered from packet loss by selective acknowledgements
12 congestion windows recovered without slow start by DSACK
145 congestion windows recovered without slow start after partial ack
2 timeouts after SACK recovery
1 timeouts in loss state
12 fast retransmits
380 retransmits in slow start
671 other TCP timeouts
TCPLossProbes: 448
TCPLossProbeRecovery: 298
1 SACK retransmits failed
116 packets collapsed in receive queue due to low socket buffer
1538 DSACKs sent for old packets
33 DSACKs sent for out of order packets
407 DSACKs received
14 DSACKs for out of order packets received
220 connections reset due to unexpected data
12 connections reset due to early user close
77 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 148
TCPSpuriousRTOs: 27
TCPSackShiftFallback: 400
TCPRetransFail: 74
TCPRcvCoalesce: 48198
TCPOFOQueue: 52142
TCPOFOMerge: 32
TCPChallengeACK: 132
TCPSYNChallenge: 131
TCPSpuriousRtxHostQueues: 24
TCPAutoCorking: 2501
IpExt:
InMcastPkts: 103788
OutMcastPkts: 148771
InBcastPkts: 51610
InOctets: 2019126618
OutOctets: 127958018
InMcastOctets: 4581359
OutMcastOctets: 6349938
InBcastOctets: 5693174
InCsumErrors: 9203
InNoECTPkts: 1871583
InECT0Pkts: 31
InCEPkts: 6
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor
DRAM Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen
Core processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f5000000-f60fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:0534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30
[XHCI])
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7e20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210
Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7e3c000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit
Network Connection [8086:1502] (rev 04)
Subsystem: Dell Device [1028:0534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7e39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series
Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7200000-f7bfffff
Prefetchable memory behind bridge: 00000000f2b00000-00000000f34fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=0b, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6800000-f71fffff
Prefetchable memory behind bridge: 00000000f2100000-00000000f2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f7e37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC
Controller [8086:1e55] (rev 04)
Subsystem: Dell Device [1028:0534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA
Controller [RAID mode] [8086:282a] (rev 04)
Subsystem: Dell Device [1028:0534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset
Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:0534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device
[10de:0dfc] (rev ff) (prog-if ff)
!!! Unknown header type 7f
03:00.0 Network controller [0280]: Broadcom Corporation BCM4313
802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Dell Device [1028:0015]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
0c:00.0 SD Host controller [0805]: O2 Micro, Inc. Device [1217:8221]
(rev 05) (prog-if 01)
Subsystem: Dell Device [1028:0534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 001 Device 004: ID 413c:8197 Dell Computer Corp. Bus 001 Device 005:
ID 0c45:643f Microdia
-- System Information:
Debian Release: 7.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.14-0.bpo.2-686-pae (SMP w/8 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-0.bpo.2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.14-0.bpo.2-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38+deb7u4
Versions of packages linux-image-3.14-0.bpo.2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-0.bpo.2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.14-0.bpo.2-686-pae/prerm/removing-running-kernel-3.14-0.bpo.2-686-pae:
true
linux-image-3.14-0.bpo.2-686-pae/postinst/depmod-error-initrd-3.14-0.bpo.2-686-pae:
false
linux-image-3.14-0.bpo.2-686-pae/postinst/mips-initrd-3.14-0.bpo.2-686-pae:
Reply to: