[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#754915: marked as done (linux-image-3.14-1-amd64 does not boot on an Acer TravelMate B115-M laptop)

Your message dated Sun, 31 Aug 2014 21:48:20 -0700
with message-id <1409546900.27524.13.camel@decadent.org.uk>
and subject line Re: Bug#754915: Solved in linux-image-3.14-2-amd64 (3.14.15-2)
has caused the Debian Bug report #754915,
regarding linux-image-3.14-1-amd64 does not boot on an Acer TravelMate B115-M laptop
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
754915: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=754915
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.14.12-1
Severity: important

Kernel 3.14-1-amd64 does not boot on laptop Acer B115-M. It stops on "Loading,
please wait" message. The problem is ACPI related, since I can boot adding
"acpi=off" to the kernel line in Grub.

I can boot normally with linux-image-3.2.0-4-amd64 from stable (version
3.2.60-1+deb7u1) and linux-image-3.10-3-amd64 (version 3.10.11-1). In both
cases, the system boot and function normally, except for one ACPI  problem: I
have always "ACPI: Battery Slot [BAT1] (battery absent)" (so no
/sys/class/power_supply/BAT1) and I have always "ACPI: AC Adapter [ACAD] (on-
line)" even if the adapter is unplugged (so always
/sys/class/power_supply/ACAD/online = 1, even if unplugged).

If you need additional information, please ask.



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Acer
product_name: TravelMate B115-M
product_version: V1.04
chassis_vendor: Chassis Manufacturer
chassis_version: Chassis Version
bios_vendor: Insyde Corp.
bios_version: V1.04
board_vendor: Acer
board_name: Roxy
board_version: Type2 - A01 Board Version

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation ValleyView SSA-CUnit [8086:0f00] (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation ValleyView Gen7 [8086:0f31] (rev 0e) (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
	Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 2050 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

00:13.0 SATA controller [0106]: Intel Corporation ValleyView 6-Port SATA AHCI Controller [8086:0f23] (rev 0e) (prog-if 01 [AHCI 1.0])
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 103
	Region 0: I/O ports at 2048 [size=8]
	Region 1: I/O ports at 205c [size=4]
	Region 2: I/O ports at 2040 [size=8]
	Region 3: I/O ports at 2058 [size=4]
	Region 4: I/O ports at 2020 [size=32]
	Region 5: Memory at 9091f000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:14.0 USB controller [0c03]: Intel Corporation ValleyView USB xHCI Host Controller [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 105
	Region 0: Memory at 90900000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:1a.0 Encryption controller [1080]: Intel Corporation ValleyView SEC [8086:0f18] (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at 90800000 (32-bit, non-prefetchable) [size=1M]
	Region 1: Memory at 90700000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation ValleyView High Definition Audio Controller [8086:0f04] (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 106
	Region 0: Memory at 90910000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port [8086:0f48] (rev 0e) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port [8086:0f4a] (rev 0e) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: 90600000-906fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port [8086:0f4c] (rev 0e) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 90500000-905fffff
	Prefetchable memory behind bridge: 0000000090400000-00000000904fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation ValleyView Power Control Unit [8086:0f1c] (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.3 SMBus [0c05]: Intel Corporation ValleyView SMBus Controller [8086:0f12] (rev 0e)
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at 90919000 (32-bit, non-prefetchable) [size=32]
	Region 4: I/O ports at 2000 [size=32]
	Capabilities: <access denied>

02:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)
	Subsystem: Foxconn International, Inc. Device [105b:e052]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=512K]
	Expansion ROM at 90680000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
	Subsystem: Acer Incorporated [ALI] Device [1025:0860]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 104
	Region 0: I/O ports at 1000 [size=256]
	Region 2: Memory at 90500000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at 90400000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 1bcf:2c57 Sunplus Innovation Technology Inc. 
Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai 
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'oldstable-updates'), (500, 'unstable'), (500, 'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.14-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    18-1
ii  linux-base                              3.5
ii  module-init-tools                       18-1

Versions of packages linux-image-3.14-1-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.14-1-amd64 suggests:
pn  debian-kernel-handbook     <none>
pn  grub-pc | extlinux | lilo  <none>
ii  linux-doc-3.14             3.14.10-1

Versions of packages linux-image-3.14-1-amd64 is related to:
ii  firmware-atheros        0.43
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.43
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true
  linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false

--- End Message ---
--- Begin Message --- 
Version: 3.14.15-2

On Mon, 2014-09-01 at 02:17 +0200, DIONISIO MARTINEZ SOLER wrote:
> Hi.
> 
> This bug is no longer present in last linux kernel version from  
> unstable (linux-image-3.14-2-amd64, version 3.14.15-2): it boots  
> normally, and bug #754916 is also solved (/sys/class/power_supply/BAT1  
> does exist and /sys/class/power_supply/ACAD/online is reporting online  
> status correctly).

Thanks for letting us know; I'm closing the bug.

Ben.

-- 
Ben Hutchings
Q.  Which is the greater problem in the world today, ignorance or apathy?
A.  I don't know and I couldn't care less.

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: