[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#743267: marked as done (Subject: linux-image-3.13-1-686-pae: stock-kernel does not boot on newer Penium-M, panics)

Your message dated Fri, 22 Aug 2014 11:47:56 +0200
with message-id <20140822114756.0c54bbe6@s5.lokal>
and subject line Fix backported to longterm-kernel 3.14
has caused the Debian Bug report #743267,
regarding Subject: linux-image-3.13-1-686-pae: stock-kernel does not boot on newer Penium-M, panics
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
743267: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743267
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Package: src:linux
Version: 3.13.7-1
Severity: minor


Dear Maintainer,

[see attached screenshot 'boot-img.JPG']
My custom built minimal kernel is workable, but it has a tendency to freeze sometimes,
like the previous longterm-version 3.12.x (this applies to both stock- and custom built
versions), see attached kernel-configuration and 'dmsg2.txt.xz'. It is the same situation
as before with version 3.13.5 .



- -- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
not available

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: IBM ThinkPad Z60t [1014:0575]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root
Port [8086:2591] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+
66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01,
sec-latency=0 I/O behind bridge: 00002000-00002fff
	Memory behind bridge: b0100000-b01fffff
	Prefetchable memory behind bridge: c0000000-c7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+
<SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02,
subordinate=02, sec-latency=0 I/O behind bridge: 00008000-00008fff
	Memory behind bridge: b0200000-b02fffff
	Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
<SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 3 [8086:2664] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03,
subordinate=0a, sec-latency=0 I/O behind bridge: 00003000-00003fff
	Memory behind bridge: b2000000-b3ffffff
	Prefetchable memory behind bridge: 00000000c8000000-00000000c80fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort-
<SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Device [1014:0565]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Device [1014:0565]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Device [1014:0565]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Device [1014:0565]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 4: I/O ports at 1860 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2
EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: IBM Device [1014:0566]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3)
(prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B-
ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Bus: primary=00, secondary=0b, subordinate=0e, sec-latency=64
	I/O behind bridge: 00004000-00007fff
	Memory behind bridge: b4000000-bfffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: IBM Device [1014:0567]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 1880 [size=64]
	Region 2: Memory at b0000800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at b0000400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: snd_intel8x0

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge
[8086:2641] (rev 03) Subsystem: IBM Device [1014:0568]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller
[8086:2653] (rev 03) (prog-if 80 [Master]) Subsystem: IBM Device [1014:056a]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at 18c0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller [8086:266a] (rev 03) Subsystem: IBM Device [1014:056b]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 18e0 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI]
RV370/M22 [Mobility Radeon X300] [1002:5460] (prog-if 00 [VGA controller]) Subsystem: IBM
Device [1014:056e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 2000 [size=256]
	Region 2: Memory at b0100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at b0120000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit
Ethernet PCI Express [14e4:167d] (rev 11) Subsystem: IBM ThinkPad Z60t [1014:0577]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b0200000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

0b:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 8d)
	Subsystem: IBM ThinkPad Z60t [1014:056c]
	Physical Slot: 1-1
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b4000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=0b, secondary=0c, subordinate=0d, sec-latency=176
	Memory window 0: d0000000-d3ffffff (prefetchable)
	Memory window 1: b8000000-bbffffff
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Capabilities: <access denied>
	Kernel driver in use: yenta_cardbus

0b:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2]
Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation IBM ThinkPad R50e
[8086:2712] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line
Size: 32 bytes Interrupt: pin A routed to IRQ 21
	Region 0: Memory at b4001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ipw2200


** USB devices:
Bus 005 Device 002: ID 05e3:0722 Genesys Logic, Inc. 
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


- -- System Information:
Debian Release: jessie/sid
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'testing'), (50, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.13.7lean (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.13-1-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.52
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    16-2
ii  linux-base                              3.5
ii  module-init-tools                       16-2

Versions of packages linux-image-3.13-1-686-pae recommends:
ii  firmware-linux-free  3.3
ii  libc6-i686           2.18-4

Versions of packages linux-image-3.13-1-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.00-22
pn  linux-doc-3.13          <none>

Versions of packages linux-image-3.13-1-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
ii  firmware-ipw2x00        0.41
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.41
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

- -- debconf information:
  linux-image-3.13-1-686-pae/prerm/removing-running-kernel-3.13-1-686-pae: true
  linux-image-3.13-1-686-pae/postinst/depmod-error-initrd-3.13-1-686-pae: false
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)

iEYEARECAAYFAlM6bUoACgkQ5+rBHyUt5wvmrQCeMzB9LQQONnZ3yYft0HZlWGOL
j1UAoJXTHJ4/xQJvkO2zeLEyCKNTi+To
=2dut
-----END PGP SIGNATURE-----

Attachment: dmsg2.txt.xz
Description: application/xz

Attachment: boot-img.JPG
Description: JPEG image

Attachment: config-3.13.7lean.xz
Description: application/xz


--- End Message ---
--- Begin Message --- 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Originally I was waiting for the fixed version 3.15 to appear in testing, but it did not
yet, because 3.14 is a longterm-kernel.
The fix was ported to kernel-version 3.14 though:

> andreas@jessie:~$ uname -r
> 3.14-2-686-pae
> andreas@jessie:~$ aptitude search linux-image
> p   linux-image-3.14-2-486                - Linux 3.14 for older
> PCs i A linux-image-3.14-2-686-pae            - Linux 3.14 for modern
> PCs p   linux-image-3.14-2-686-pae-dbg        - Debugging symbols for Linux
> 3.14-2-686-pae p   linux-image-3.14-2-amd64              - Linux 3.14 for 64-bit
> PCs p   linux-image-3.14-2-rt-686-pae         - Linux 3.14 for modern PCs,
> PREEMPT_RT p   linux-image-3.14-2-rt-686-pae-dbg     - Debugging symbols for Linux
> 3.14-2-rt-686-pae p   linux-image-486                       - Linux for older PCs
> (meta-package) i   linux-image-686-pae                   - Linux for modern PCs
> (meta-package) p   linux-image-686-pae-dbg               - Debugging symbols for Linux
> 686-pae configurati p   linux-image-amd64                     - Linux for 64-bit PCs
> (meta-package) p   linux-image-rt-686-pae                - Linux for modern PCs
> (meta-package), PREEMPT_RT p   linux-image-rt-686-pae-dbg            - Debugging
> symbols for Linux rt-686-pae configur andreas@jessie:~$ aptitude show
> linux-image-3.14-2-686-pae Package: linux-image-3.14-2-686-pae      
> State: installed
> Automatically installed: yes
> Version: 3.14.15-2
> Priority: optional
> Section: kernel
> Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
> Architecture: i386
> Uncompressed Size: 116 M
> Depends: kmod | module-init-tools, linux-base (>= 3~), debconf (>= 0.5) | debconf-2.0,
>          initramfs-tools (>= 0.110~) | linux-initramfs-tool
> PreDepends: debconf | debconf-2.0
> Recommends: firmware-linux-free (>= 3~), libc6-i686
> Suggests: linux-doc-3.14, debian-kernel-handbook, grub-pc | extlinux | lilo
> Breaks: at (< 3.1.12-1+squeeze1), initramfs-tools (< 0.110~)
> Provides: linux-modules-3.14-2-686-pae
> Description: Linux 3.14 for modern PCs
>  The Linux kernel 3.14 and modules for use on PCs with one or more processors supporting
>  PAE. 
>  
>  This kernel requires PAE (Physical Address Extension). This feature is supported by the
>  Intel Pentium Pro/II/III/4/4M/D, Xeon, Core and Atom; AMD Geode NX, Athlon (K7), Duron,
>  Opteron, Sempron, Turion or Phenom; Transmeta Efficeon; VIA C7; and some other
> processors. 
>  This kernel also runs on a Xen hypervisor.  It supports both privileged (dom0) and
>  unprivileged (domU) operation.
> Homepage: https://www.kernel.org/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iEYEARECAAYFAlP3EcwACgkQ5+rBHyUt5wsykwCgtGxG4WJLUoDqG3MtN47ZqyvB
cw8AoLYNfXR73bZW1SJGzWjtEKGWslG+
=C5rx
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: