Bug#752881: linux-image-3.2.0-4-amd64: bluRay writer can't write under wheezy kernel (I/O error: Unhandled sense code) but ok under squeeze
Package: src:linux
Version: 3.2.57-3+deb7u2
Severity: normal
Dear Maintainer,
Under this linux-image-3.2.0-4-amd64 kernel my blu Ray writer [sr1] has severe problems so that I can not writer a Blu Ray with it.
But it writes perfectly under the older squeeze linux-image-2.6.32-5-amd64 kernel. This is how I presently work around the problem (boot the
older kernel). It produces endless errors of the form:
Jun 7 14:08:36 azza kernel: [569395.478041] end_request: I/O error, dev sr1, sector 0
Jun 7 14:08:36 azza kernel: [569395.481744] sr 6:0:0:0: [sr1] Unhandled sense code
Jun 7 14:08:36 azza kernel: [569395.481746] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jun 7 14:08:36 azza kernel: [569395.481748] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
Jun 7 14:08:36 azza kernel: [569395.481751] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
Jun 7 14:08:36 azza kernel: [569395.481754] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
...
Googling around I hit upon this http://forums.debian.net/viewtopic.php?f=7&t=111795&start=30 which references https://lkml.org/lkml/2014/5/9/363
and https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=701201
which suggested : libata.atapi_passthru16=0 is needed by some hardware
I tried this which allowed me to write about half a bluRay and then it failed - leaving a half written unusable disc !
Would love a fix to avoid having to flick back to the older kernel which is really inconvient to others.
Thinking about trying to build kernels back to 2.6.32 and seeing where the break is - but 2.6.32 appears to have *LOTS* of problems compiling with the wheezy
set up (gcc 4.7.2)...
Perhaps Jessie might be a better direction - but really want to run a stable kernel on this machine as it is used by other people.
Andrew
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3+deb7u2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=c5c1b15a-a6fc-11e0-a2f4-001e8c7db70d ro nmi_watchdog=1 libata.atapi_passthru16=0
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 30.012531] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.014528] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.016534] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.018571] end_request: I/O error, dev sr1, sector 0
[ 30.029441] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.031425] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.033432] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.035432] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.037440] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.039476] end_request: I/O error, dev sr1, sector 0
[ 30.050342] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.052329] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.054327] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.056332] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.058334] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.060376] end_request: I/O error, dev sr1, sector 0
[ 30.071236] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.073223] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.075221] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.077225] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.079223] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.081266] end_request: I/O error, dev sr1, sector 0
[ 30.092129] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.094107] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.096117] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.098117] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.100123] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.102159] end_request: I/O error, dev sr1, sector 0
[ 30.113029] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.115015] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.117024] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.119024] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.121029] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.123067] end_request: I/O error, dev sr1, sector 0
[ 30.133933] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.135916] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.137924] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.139921] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.141927] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.143965] end_request: I/O error, dev sr1, sector 0
[ 30.154831] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.156823] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.158822] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.160838] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.162839] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.164882] end_request: I/O error, dev sr1, sector 0
[ 30.175745] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.177736] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.179738] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.181742] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.183743] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.185791] end_request: I/O error, dev sr1, sector 0
[ 30.196658] sr 6:0:0:0: [sr1] Unhandled sense code
[ 30.198640] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.200651] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current]
[ 30.202652] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information
[ 30.204664] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 30.206706] end_request: I/O error, dev sr1, sector 0
[ 34.776882] net eth1: Setting full-duplex based on MII#1 link partner capability of 45e1
[ 41.824049] eth1: no IPv6 routers present
[ 46.574278] atl1 0000:01:00.0: irq 46 for MSI/MSI-X
[ 46.574333] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex
[ 46.574371] atl1 0000:01:00.0: eth0 link is up 1000 Mbps full duplex
[ 57.488012] eth0: no IPv6 routers present
[ 60.977888] RPC: Registered named UNIX socket transport module.
[ 60.979501] RPC: Registered udp transport module.
[ 60.981130] RPC: Registered tcp transport module.
[ 60.982712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 61.034265] FS-Cache: Loaded
[ 61.063708] FS-Cache: Netfs 'nfs' registered for caching
[ 61.082234] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 62.923328] fuse init (API version 7.17)
[ 63.311626] NET: Registered protocol family 15
[ 63.360549] alg: No test for cipher_null (cipher_null-generic)
[ 63.362792] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 63.365032] alg: No test for digest_null (digest_null-generic)
[ 63.367255] alg: No test for compress_null (compress_null-generic)
[ 63.390701] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[ 63.835153] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 63.940393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 68.127892] Bluetooth: Core ver 2.16
[ 68.130182] NET: Registered protocol family 31
[ 68.132346] Bluetooth: HCI device and connection manager initialized
[ 68.134491] Bluetooth: HCI socket layer initialized
[ 68.136625] Bluetooth: L2CAP socket layer initialized
[ 68.138767] Bluetooth: SCO socket layer initialized
[ 68.176776] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 68.178422] Bluetooth: BNEP filters: protocol multicast
[ 68.224639] Bluetooth: RFCOMM TTY layer initialized
[ 68.226266] Bluetooth: RFCOMM socket layer initialized
[ 68.227868] Bluetooth: RFCOMM ver 1.11
[ 68.499257] lp0: using parport0 (interrupt-driven).
[ 68.509398] ppdev: user-space parallel port driver
[ 77.955567] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 77.984129] NFSD: starting 90-second grace period
[ 80.433682] tun: Universal TUN/TAP device driver, 1.6
[ 80.433686] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[74816.633848] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[76676.497136] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[82080.982359] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
** Model information
sys_vendor: System manufacturer
product_name: P5E-V HDMI
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0204
board_vendor: ASUSTeK Computer INC.
board_name: P5E-V HDMI
board_version: Rev 1.xx
** Loaded modules:
tun
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
battery
power_supply
ppdev
lp
rfcomm
bnep
bluetooth
rfkill
binfmt_misc
ipt_MASQUERADE
iptable_nat
nf_nat
xt_TCPMSS
xt_tcpmss
iptable_mangle
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
xt_tcpudp
iptable_filter
ip_tables
x_tables
deflate
zlib_deflate
twofish_generic
ctr
twofish_x86_64_3way
twofish_x86_64
twofish_common
camellia
serpent
blowfish_generic
blowfish_x86_64
blowfish_common
cast5
des_generic
cbc
cryptd
aes_x86_64
aes_generic
xcbc
rmd160
sha512_generic
sha256_generic
sha1_ssse3
sha1_generic
hmac
crypto_null
af_key
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext2
ext4
crc16
jbd2
firewire_sbp2
loop
kvm_intel
kvm
dvb_usb_rtl2832u(O)
tda1004x
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
ir_sony_decoder
snd_seq_midi
snd_seq_midi_event
ir_jvc_decoder
i915
snd_rawmidi
ir_rc6_decoder
dvb_usb
cdc_acm
rc_hauppauge
ir_rc5_decoder
ir_nec_decoder
budget_ci
budget_core
ttpci_eeprom
psmouse
saa7146
dvb_core
rc_core
video
acpi_cpufreq
mperf
serio_raw
pcspkr
evdev
drm_kms_helper
drm
i2c_algo_bit
i2c_i801
iTCO_wdt
parport_pc
parport
snd_seq
snd_seq_device
snd_timer
coretemp
processor
snd
iTCO_vendor_support
thermal_sys
i2c_core
soundcore
button
asus_atk0110
ext3
mbcache
jbd
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
md_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
usbhid
hid
ahci
ata_generic
firewire_ohci
floppy
libahci
uhci_hcd
firewire_core
crc_itu_t
tulip
pata_jmicron
libata
ehci_hcd
atl1
mii
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8295]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at cc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0400000-f07fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe6fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at b880 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b480 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b080 [size=32]
Region 5: Memory at fe6fa800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6fb400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. Attansic L1 Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
04:00.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
04:00.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
04:01.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 41)
Subsystem: Hewlett-Packard Company Device [103c:1066]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5000ns min, 10000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e800 [size=128]
Region 1: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at feb80000 [disabled] [size=256K]
Kernel driver in use: tulip
04:02.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget/Hauppauge WinTV-NOVA-T DVB card [13c2:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_ci dvb
04:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febfe800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e480 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 413c:2101 Dell Computer Corp. SmartCard Reader Keyboard
Bus 005 Device 003: ID 2341:0001 Arduino SA Uno (CDC ACM)
Bus 006 Device 002: ID 1267:0201 Logic3 / SpectraVideo plc A4Tech SWOP-3 Mouse
Bus 003 Device 002: ID 1f4d:a803 G-Tek Electronics Group
Bus 003 Device 003: ID 1f4d:a803 G-Tek Electronics Group
-- System Information:
Debian Release: 7.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: