Bug#751398: linux-image-3.14-1-686-pae: kernel switches off cooling on HP Compaq nx8220
Package: src:linux
Version: 3.14.4-1
Severity: important
Dear Maintainer,
kernel 3.14 switches off cooling on my laptop. The fans do not
start even when the temperature reported by acpi raises above
100 °C (I've stopped there to not damage the hardware). There is
no fan controlling software like lm-sensors/fancontrol installed.
Booting with kernel 3.2 fixes the problem, fans work normal and
start to work at about 50 to 60 °C.
Regards
Uwe
-- Package-specific info:
** Version:
Linux version 3.14-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=32077a82-12e5-4f22-a606-1dd16fcd68c1 ro quiet
** Not tainted
** Kernel log:
[ 6.881925] radeon 0000:01:00.0: radeon: using MSI.
[ 6.881957] [drm] radeon: irq initialized.
[ 6.881974] [drm] Loading R300 Microcode
[ 6.918172] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R300_cp.bin
[ 6.918525] [drm] radeon: ring at 0x00000000A0001000
[ 6.918553] [drm] ring test succeeded in 0 usecs
[ 6.918849] [drm] ib test succeeded in 0 usecs
[ 6.920600] [drm] Panel ID String: LPL
[ 6.920606] [drm] Panel Size 1680x1050
[ 6.941407] [drm] radeon legacy LVDS backlight initialized
[ 6.941413] [drm] Radeon Display Connectors
[ 6.941418] [drm] Connector 0:
[ 6.941422] [drm] VGA-1
[ 6.941429] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 6.941432] [drm] Encoders:
[ 6.941437] [drm] CRT1: INTERNAL_DAC1
[ 6.941441] [drm] Connector 1:
[ 6.941445] [drm] DVI-D-1
[ 6.941448] [drm] HPD1
[ 6.941454] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 6.941457] [drm] Encoders:
[ 6.941461] [drm] DFP1: INTERNAL_TMDS1
[ 6.941465] [drm] Connector 2:
[ 6.941469] [drm] LVDS-1
[ 6.941475] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 6.941478] [drm] Encoders:
[ 6.941482] [drm] LCD1: INTERNAL_LVDS
[ 6.941486] [drm] Connector 3:
[ 6.941490] [drm] SVIDEO-1
[ 6.941493] [drm] Encoders:
[ 6.941496] [drm] TV1: INTERNAL_DAC2
[ 7.012097] [drm] fb mappable at 0xC00C0000
[ 7.012100] [drm] vram apper at 0xC0000000
[ 7.012102] [drm] size 7057408
[ 7.012103] [drm] fb depth is 24
[ 7.012105] [drm] pitch is 6720
[ 7.012291] fbcon: radeondrmfb (fb0) is primary device
[ 7.035649] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 7.061201] Console: switching to colour frame buffer device 210x65
[ 7.085861] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.085864] radeon 0000:01:00.0: registered panic notifier
[ 7.087335] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
[ 7.320066] intel8x0_measure_ac97_clock: measured 55416 usecs (2670 samples)
[ 7.320076] intel8x0: clocking to 48000
[ 7.404869] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 35334
[ 7.404886] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 7.444144] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 8.259747] cfg80211: World regulatory domain updated:
[ 8.259757] cfg80211: DFS Master region: unset
[ 8.259762] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.259769] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.259774] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.259780] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 8.259785] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8.259790] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8.259795] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 9.381183] Adding 979960k swap on /dev/sda2. Priority:-1 extents:1 across:979960k
[ 9.420517] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 9.889756] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 10.409729] usbcore: registered new interface driver usbserial
[ 10.410242] usbcore: registered new interface driver usbserial_generic
[ 10.410733] usbserial: USB Serial support registered for generic
[ 10.412375] usbcore: registered new interface driver visor
[ 10.412865] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 10.413353] usbserial: USB Serial support registered for Sony Clie 5.0
[ 10.413393] usbserial: USB Serial support registered for Sony Clie 3.5
[ 10.473684] fuse init (API version 7.22)
[ 11.244164] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 13.431338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.396350] tg3 0000:10:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 16.396362] tg3 0000:10:00.0 eth0: Flow control is off for TX and off for RX
[ 16.396609] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.940065] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.268099] RPC: Registered named UNIX socket transport module.
[ 20.268103] RPC: Registered udp transport module.
[ 20.268104] RPC: Registered tcp transport module.
[ 20.268106] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.302687] FS-Cache: Loaded
[ 20.353581] FS-Cache: Netfs 'nfs' registered for caching
[ 20.433580] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.062153] ttyS0: LSR safety check engaged!
[ 21.062945] ttyS0: LSR safety check engaged!
[ 21.064239] ttyS3: LSR safety check engaged!
[ 21.065000] ttyS3: LSR safety check engaged!
[ 21.351722] ttyS3: LSR safety check engaged!
[ 21.655979] tg3 0000:10:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 21.655991] tg3 0000:10:00.0 eth0: Flow control is off for TX and off for RX
[ 21.656237] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.952066] Bluetooth: RFCOMM TTY layer initialized
[ 23.952088] Bluetooth: RFCOMM socket layer initialized
[ 23.952100] Bluetooth: RFCOMM ver 1.11
[ 23.960501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.960510] Bluetooth: BNEP filters: protocol multicast
[ 23.960525] Bluetooth: BNEP socket layer initialized
[ 38.514044] systemd-logind[3671]: New seat seat0.
[ 38.523094] systemd-logind[3671]: Watching system buttons on /dev/input/event4 (Power Button)
[ 38.523184] systemd-logind[3671]: Watching system buttons on /dev/input/event1 (Video Bus)
[ 38.523259] systemd-logind[3671]: Watching system buttons on /dev/input/event3 (Lid Switch)
[ 38.523339] systemd-logind[3671]: Watching system buttons on /dev/input/event2 (Sleep Button)
[ 38.524478] systemd-logind[3671]: New session 2 of user uwe.
** Model information
not available
** Loaded modules:
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
bnep
rfcomm
irtty_sir
sir_dev
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
fuse
visor
usbserial
joydev
hp_wmi
sparse_keymap
radeon
iTCO_wdt
iTCO_vendor_support
pcspkr
ipw2200
psmouse
libipw
cfg80211
evdev
serio_raw
ttm
snd_intel8x0m
snd_intel8x0
pcmcia
lib80211
drm_kms_helper
tifm_7xx1
snd_ac97_codec
snd_pcm_oss
snd_seq_midi
snd_seq_midi_event
snd_mixer_oss
snd_pcm
snd_rawmidi
lpc_ich
tifm_core
mfd_core
drm
i2c_algo_bit
rng_core
yenta_socket
pcmcia_rsrc
pcmcia_core
wmi
snd_seq
snd_seq_device
battery
btusb
parport_pc
parport
i2c_core
snd_timer
irda
crc_ccitt
tpm_infineon
tpm
snd
acpi_cpufreq
soundcore
ac97_bus
bluetooth
6lowpan_iphc
button
video
rfkill
processor
ac
ext4
crc16
mbcache
jbd2
sg
sd_mod
sr_mod
crc_t10dif
crct10dif_common
cdrom
ata_generic
ata_piix
libata
sdhci_pci
sdhci
scsi_mod
mmc_core
firewire_ohci
firewire_core
crc_itu_t
ehci_pci
tg3
ptp
pps_core
libphy
fan
thermal
thermal_sys
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c8800000-c8bfffff
Prefetchable memory behind bridge: c0000000-c7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c8000000-c83fffff
Prefetchable memory behind bridge: 0000000084000000-00000000841fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 84200000-843fffff
Prefetchable memory behind bridge: 0000000084400000-00000000845fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c8c00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00006000-00006fff
Memory behind bridge: c8400000-c87fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 3100 [size=256]
Region 1: I/O ports at 3200 [size=64]
Region 2: Memory at c8c01000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c8c02000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 3400 [size=256]
Region 1: I/O ports at 3500 [size=128]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0m
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 3580 [size=16]
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV380/M24 [Mobility Radeon X600] [1002:3150] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at c8800000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c8820000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Hewlett-Packard Company nc6120/nx8220/nw8240 [103c:12f6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c8400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8401000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83ffffff (prefetchable)
Memory window 1: cc000000-cfffffff
I/O window 0: 00006000-000060ff
I/O window 1: 00006400-000064ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
02:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at c8402000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c8404000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c8408000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
02:06.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at c840a000 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at c840b000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at c840c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
02:06.5 Communication controller [0780]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller [104c:8035]
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c840d000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at c840e000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at c840f000 (32-bit, non-prefetchable) [size=4K]
Region 3: Memory at c8410000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
10:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11)
Subsystem: Hewlett-Packard Company HP nx8220 [103c:0934]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:011d Hewlett-Packard Bluetooth 1.2 Interface [Broadcom BCM2035]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (750, 'testing'), (650, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.14-1-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.14-1-686-pae recommends:
ii firmware-linux-free 3.3
ii libc6-i686 2.19-1
Versions of packages linux-image-3.14-1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 0.42
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.42
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.14-1-686-pae/postinst/depmod-error-initrd-3.14-1-686-pae: false
linux-image-3.14-1-686-pae/prerm/removing-running-kernel-3.14-1-686-pae: true
Reply to: