Bug#748949: linux-image-3.14-1-amd64: Can't adjust display brightness since kernel 3.14.4-1-amd64
Package: src:linux
Version: 3.14.4-1
Severity: normal
Description
Overview
After booting the notebook display is set to full brightness and cannot be
dimmed moving the brightness slider of the gnome-control-center nor by pressing
on the Fn-↑- or Fn-↓-combination.
Only sending a lower value than 12421 to
/sys/class/backlight/intel_backlight/brightness, e. g. executing 'echo 2400 >
/sys/class/backlight/intel_backlight/brightness' on the console as root works.
Steps to Reproduce
(1) Boot the OS and log in.
(2) Open gnome-control-center, start the power applet and move the brightness
slider to and fro, or
(3) Press the Fn key down and tap on the ↑ or the ↓ key. A window with a
symbolised sun and a progress bar which reacts correctly to your key presses.
But nothing else happens.
Actual results
The display brightness can no longer be changed with the brightness slider nor
by pressing Fn-↑- or Fn-↓. You have to use a work-around as mentioned
above.
Additional Information
Relevant output of lspci -v
00:02.0 VGA compatible controller: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA
controller])
Subsystem: Samsung Electronics Co Ltd Notebook N150P
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at f0300000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 18d0 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Atom Processor
D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Subsystem: Samsung Electronics Co Ltd Notebook N150P
Flags: bus master, fast devsel, latency 0
Memory at f0380000 (32-bit, non-prefetchable) [size=512K]
Trying kernel options
No one of the four kernel options proposed in the chapter "Debugging backlight
control problems" (http://hansdegoede.livejournal.com/13889.html) worked.
Listing of dmesg
[ 0.000000] CPU0 microcode updated early to revision 0x107, date =
2009-08-25
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64
root=UUID=8ded205f-0405-4290-92e0-c865945f4d03 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f5affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f5b0000-0x000000003f5bffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f5c0000-0x000000003f5c2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f5c3000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. N150P/N210P/N220P
/N150P/N210P/N220P , BIOS 01KY.M008.20100430.RHU 04/30/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3f5b0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f7dd0-0x000f7ddf] mapped at
[ffff8800000f7dd0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE
[ 0.000000] BRK [0x01aa4000, 0x01aa4fff] PGTABLE
[ 0.000000] BRK [0x01aa5000, 0x01aa5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3f200000-0x3f3fffff]
[ 0.000000] [mem 0x3f200000-0x3f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3f1fffff]
[ 0.000000] [mem 0x3c000000-0x3f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3f400000-0x3f5affff]
[ 0.000000] [mem 0x3f400000-0x3f5affff] page 4k
[ 0.000000] BRK [0x01aa6000, 0x01aa6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x364f4000-0x37271fff]
[ 0.000000] ACPI: RSDP 00000000000f7da0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5b8d8d 00006C (v01 SECCSD LH43STAR 06040000
LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5bfc92 0000F4 (v03 INTEL 06040000
PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5b9ff5 005BA9 (v01 INTEL BEARG31A 06040000
MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5c2fc0 000040
[ 0.000000] ACPI: MCFG 000000003f5bfd86 00003C (v01 PTLTD MCFG 06040000
LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5bfdc2 000038 (v01 PTLTD HPETTBL 06040000
LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5bfdfa 000068 (v01 PTLTD ? APIC 06040000
LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5bfe62 000028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5bfe8a 000176 (v01 SECCSD LH43STAR 06040000
LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5b9395 00025F (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5b92ef 0000A6 (v01 PmRef Cpu1Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5b8df9 0004F6 (v02 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003f5affff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3f5affff]
[ 0.000000] NODE_DATA [mem 0x3f5ab000-0x3f5affff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD ->
[ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f5affff]
[ 0.000000] On node 0 totalpages: 259404
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3492 pages used for memmap
[ 0.000000] DMA32 zone: 255408 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88003f200000 s86080 r8192
d24512 u1048576
[ 0.000000] pcpu-alloc: s86080 r8192 d24512 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 255835
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64
root=UUID=8ded205f-0405-4290-92e0-c865945f4d03 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 997960K/1037616K available (4909K kernel code, 704K
rwdata, 1660K rodata, 1000K init, 960K bss, 39656K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1662.553 MHz processor
[ 0.004017] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3325.10 BogoMIPS (lpj=6650212)
[ 0.004024] pid_max: default: 32768 minimum: 301
[ 0.004052] ACPI: Core revision 20131218
[ 0.014442] ACPI: All ACPI Tables successfully acquired
[ 0.016102] Security Framework initialized
[ 0.016113] AppArmor: AppArmor disabled by boot time parameter
[ 0.016117] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.016315] Dentry cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.017249] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.017713] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.017727] Mountpoint-cache hash table entries: 2048 (order: 2, 16384
bytes)
[ 0.020437] Initializing cgroup subsys memory
[ 0.020458] Initializing cgroup subsys devices
[ 0.020465] Initializing cgroup subsys freezer
[ 0.020470] Initializing cgroup subsys net_cls
[ 0.020475] Initializing cgroup subsys blkio
[ 0.020479] Initializing cgroup subsys perf_event
[ 0.020543] CPU: Physical Processor ID: 0
[ 0.020547] CPU: Processor Core ID: 0
[ 0.020552] mce: CPU supports 5 MCE banks
[ 0.020564] CPU0: Thermal monitoring handled by SMI
[ 0.020579] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.020579] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.020579] tlb_flushall_shift: 6
[ 0.020727] Freeing SMP alternatives memory: 20K (ffffffff819ac000 -
ffffffff819b1000)
[ 0.023141] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062861] smpboot: CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (fam: 06,
model: 1c, stepping: 0a)
[ 0.064000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel
PMU driver.
[ 0.064000] ... version: 3
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.008000] CPU0: Thermal monitoring enabled (TM1)
[ 0.074176] x86: Booted up 1 node, 2 CPUs
[ 0.074187] smpboot: Total of 2 processors activated (6650.21 BogoMIPS)
[ 0.074335] NMI watchdog: enabled on all CPUs, permanently consumes one hw-
PMU counter.
[ 0.074962] devtmpfs: initialized
[ 0.081756] PM: Registering ACPI NVS region [mem 0x3f5c0000-0x3f5c2fff]
(12288 bytes)
[ 0.084011] pinctrl core: initialized pinctrl subsystem
[ 0.084011] NET: Registered protocol family 16
[ 0.084011] cpuidle: using governor ladder
[ 0.084011] cpuidle: using governor menu
[ 0.084011] ACPI: bus type PCI registered
[ 0.084011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.084011] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem
0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.084011] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.084535] PCI: Using configuration type 1 for base access
[ 0.088237] bio: create slab <bio-0> at 0
[ 0.088237] ACPI: Added _OSI(Module Device)
[ 0.088237] ACPI: Added _OSI(Processor Device)
[ 0.088237] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.088237] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100894] ACPI: SSDT 000000003f5b9d1e 000203 (v02 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.101395] ACPI: Dynamic OEM Table Load:
[ 0.101402] ACPI: SSDT (null) 000203 (v02 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.101696] ACPI: SSDT 000000003f5b95f4 0006A5 (v02 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.102149] ACPI: Dynamic OEM Table Load:
[ 0.102156] ACPI: SSDT (null) 0006A5 (v02 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.102764] ACPI: SSDT 000000003f5b9f21 0000D4 (v02 PmRef Cpu1Ist 00003000
INTL 20050624)
[ 0.103244] ACPI: Dynamic OEM Table Load:
[ 0.103250] ACPI: SSDT (null) 0000D4 (v02 PmRef Cpu1Ist 00003000
INTL 20050624)
[ 0.103436] ACPI: SSDT 000000003f5b9c99 000085 (v02 PmRef Cpu1Cst 00003000
INTL 20050624)
[ 0.104093] ACPI: Dynamic OEM Table Load:
[ 0.104100] ACPI: SSDT (null) 000085 (v02 PmRef Cpu1Cst 00003000
INTL 20050624)
[ 0.104542] ACPI: Interpreter enabled
[ 0.104564] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20131218/hwxface-580)
[ 0.104576] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20131218/hwxface-580)
[ 0.104576] ACPI: (supports S0 S3 S4 S5)
[ 0.104576] ACPI: Using IOAPIC for interrupt routing
[ 0.104576] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.104576] ACPI: No dock devices found.
[ 0.124612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.124630] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.124800] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
(20131218/dsfield-211)
[ 0.124815] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC]
(Node ffff88003d83cf88), AE_ALREADY_EXISTS (20131218/psparse-536)
[ 0.124831] ACPI: Marking method _OSC as Serialized because of
AE_ALREADY_EXISTS error
[ 0.124844] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.128292] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus
00-10] only partially covers this bridge
[ 0.128723] PCI host bridge to bus 0000:00
[ 0.128733] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.128740] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.128746] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.128752] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.128762] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.128768] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.128774] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.128780] pci_bus 0000:00: root bus resource [mem 0x40000000-0xf7ffffff]
[ 0.128786] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff]
[ 0.128805] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.129019] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.129036] pci 0000:00:02.0: reg 0x10: [mem 0xf0300000-0xf037ffff]
[ 0.129047] pci 0000:00:02.0: reg 0x14: [io 0x18d0-0x18d7]
[ 0.129057] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.129067] pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
[ 0.129274] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.129289] pci 0000:00:02.1: reg 0x10: [mem 0xf0380000-0xf03fffff]
[ 0.129554] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.129583] pci 0000:00:1b.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.129709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.129918] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.130050] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.130166] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.130296] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.130418] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.130525] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.130660] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.130789] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.130895] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.131024] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.131145] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.131253] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.131384] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.131448] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.131660] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.131726] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.131935] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.132010] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.132225] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.132290] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
[ 0.132518] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.132551] pci 0000:00:1d.7: reg 0x10: [mem 0xf0604000-0xf06043ff]
[ 0.132666] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.132874] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.133046] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.133176] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.133292] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.133528] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.133559] pci 0000:00:1f.2: reg 0x10: [io 0x18e8-0x18ef]
[ 0.133575] pci 0000:00:1f.2: reg 0x14: [io 0x18dc-0x18df]
[ 0.133592] pci 0000:00:1f.2: reg 0x18: [io 0x18e0-0x18e7]
[ 0.133608] pci 0000:00:1f.2: reg 0x1c: [io 0x18d8-0x18db]
[ 0.133625] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18cf]
[ 0.133641] pci 0000:00:1f.2: reg 0x24: [mem 0xf0604400-0xf06047ff]
[ 0.133703] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.133910] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.133988] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.134462] pci 0000:05:00.0: [14e4:4727] type 00 class 0x028000
[ 0.134504] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf0103fff 64bit]
[ 0.134713] pci 0000:05:00.0: supports D1 D2
[ 0.134719] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.140081] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.140102] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.140303] pci 0000:00:1c.1: PCI bridge to [bus 07]
[ 0.140313] pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
[ 0.140728] pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000
[ 0.140915] pci 0000:09:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.141018] pci 0000:09:00.0: reg 0x18: [io 0x2000-0x20ff]
[ 0.141919] pci 0000:09:00.0: supports D1 D2
[ 0.141925] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.142370] pci 0000:00:1c.2: PCI bridge to [bus 09]
[ 0.142380] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.142388] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.142577] pci 0000:00:1c.3: PCI bridge to [bus 0b]
[ 0.142587] pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff]
[ 0.142754] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
[ 0.142774] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.142780] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.142786] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff]
(subtractive decode)
[ 0.142792] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff]
(subtractive decode)
[ 0.142799] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff]
(subtractive decode)
[ 0.142805] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff]
(subtractive decode)
[ 0.142811] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff]
(subtractive decode)
[ 0.142817] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff]
(subtractive decode)
[ 0.140310] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.140488] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.140652] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.140815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.140989] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.141164] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.141338] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.141510] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.144357] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.144504] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.144523] ACPI : EC: 0 stale EC events cleared
[ 0.144523] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.144523] vgaarb: loaded
[ 0.144523] vgaarb: bridge control possible 0000:00:02.0
[ 0.148139] PCI: Using ACPI for IRQ routing
[ 0.148570] PCI: pci_cache_line_size set to 64 bytes
[ 0.148570] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.148570] e820: reserve RAM buffer [mem 0x3f5b0000-0x3fffffff]
[ 0.148570] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.148570] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.148570] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.152056] Switched to clocksource hpet
[ 0.159436] pnp: PnP ACPI init
[ 0.159492] ACPI: bus type PNP registered
[ 0.160430] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.160442] system 00:00: [io 0x1000-0x107f] could not be reserved
[ 0.160449] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.160456] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.160463] system 00:00: [io 0xfe00] has been reserved
[ 0.160469] system 00:00: [io 0x164e-0x174c] has been reserved
[ 0.160478] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.160485] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.160492] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.160499] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.160508] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160545] pnp 00:01: [dma 4]
[ 0.160621] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.160733] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.160905] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.161004] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.161153] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.161262] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.161685] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.162155] pnp: PnP ACPI: found 8 devices
[ 0.162161] ACPI: bus type PNP unregistered
[ 0.174284] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05]
add_size 1000
[ 0.174297] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 05] add_size 200000
[ 0.174319] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 07]
add_size 1000
[ 0.174326] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 07] add_size 200000
[ 0.174334] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to
[bus 07] add_size 200000
[ 0.174352] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 09] add_size 200000
[ 0.174372] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 0b]
add_size 1000
[ 0.174379] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 0b] add_size 200000
[ 0.174386] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to
[bus 0b] add_size 200000
[ 0.174426] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.174433] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff]
get_res_add_size add_size 200000
[ 0.174440] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.174447] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.174453] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff]
get_res_add_size add_size 200000
[ 0.174460] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.174466] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.174472] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.174478] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.174500] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff
64bit pref]
[ 0.174509] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.174523] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff
64bit pref]
[ 0.174536] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40600000-0x407fffff
64bit pref]
[ 0.174545] pci 0000:00:1c.3: BAR 14: assigned [mem 0x40800000-0x409fffff]
[ 0.174559] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff
64bit pref]
[ 0.174569] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.174578] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.174586] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.174595] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.174603] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.174613] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.174623] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff
64bit pref]
[ 0.174633] pci 0000:00:1c.1: PCI bridge to [bus 07]
[ 0.174640] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.174651] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.174659] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff
64bit pref]
[ 0.174670] pci 0000:00:1c.2: PCI bridge to [bus 09]
[ 0.174677] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.174686] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.174695] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff
64bit pref]
[ 0.174706] pci 0000:00:1c.3: PCI bridge to [bus 0b]
[ 0.174713] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.174722] pci 0000:00:1c.3: bridge window [mem 0x40800000-0x409fffff]
[ 0.174731] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff
64bit pref]
[ 0.174742] pci 0000:00:1e.0: PCI bridge to [bus 11]
[ 0.174762] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.174768] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.174773] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.174779] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.174785] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.174791] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.174796] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.174802] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.174809] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.174814] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.174820] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit
pref]
[ 0.174826] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.174832] pci_bus 0000:07: resource 1 [mem 0x40200000-0x403fffff]
[ 0.174838] pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit
pref]
[ 0.174844] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.174850] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.174856] pci_bus 0000:09: resource 2 [mem 0x40600000-0x407fffff 64bit
pref]
[ 0.174862] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
[ 0.174868] pci_bus 0000:0b: resource 1 [mem 0x40800000-0x409fffff]
[ 0.174874] pci_bus 0000:0b: resource 2 [mem 0x40a00000-0x40bfffff 64bit
pref]
[ 0.174881] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.174886] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.174892] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.174898] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.174904] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.174909] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.174915] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.174921] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.175053] NET: Registered protocol family 2
[ 0.175489] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.175567] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.175641] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.175716] TCP: reno registered
[ 0.175736] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.175758] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.175969] NET: Registered protocol family 1
[ 0.176047] pci 0000:00:02.0: Boot video device
[ 0.177229] PCI: CLS 32 bytes, default 64
[ 0.177368] Unpacking initramfs...
[ 0.805486] Freeing initrd memory: 13816K (ffff8800364f4000 -
ffff880037272000)
[ 0.805659] Simple Boot Flag at 0x36 set to 0x1
[ 0.806025] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[ 0.806044] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[ 0.806217] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.806939] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.807078] audit: initializing netlink subsys (disabled)
[ 0.807129] audit: type=2000 audit(1400754453.804:1): initialized
[ 0.838616] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.839085] VFS: Disk quotas dquot_6.5.2
[ 0.839149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.839309] msgmni has been set to 1976
[ 0.840099] alg: No test for stdrng (krng)
[ 0.840190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.840292] io scheduler noop registered
[ 0.840299] io scheduler deadline registered
[ 0.840340] io scheduler cfq registered (default)
[ 0.840721] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.840888] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.841032] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.841306] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.841457] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.841587] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.841807] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.841864] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.841990] intel_idle: MWAIT substates: 0x20220
[ 0.842007] intel_idle: v0.4 model 0x1C
[ 0.842011] intel_idle: lapic_timer_reliable_states 0x2
[ 0.842028] tsc: Marking TSC unstable due to TSC halts in idle states deeper
than C2
[ 0.842274] GHES: HEST is not enabled!
[ 0.842487] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.843630] Linux agpgart interface v0.103
[ 0.843750] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 0.843849] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 0.844001] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.844308] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.844576] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at
0x60,0x64 irq 1,12
[ 0.847947] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.847967] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.848482] mousedev: PS/2 mouse device common for all mice
[ 0.848893] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.848945] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 0.848972] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.848977] AMD IOMMUv2 functionality not available on this system
[ 0.849251] TCP: cubic registered
[ 0.849397] NET: Registered protocol family 10
[ 0.850017] mip6: Mobile IPv6
[ 0.850028] NET: Registered protocol family 17
[ 0.850038] mpls_gso: MPLS GSO support
[ 0.850839] registered taskstats version 1
[ 0.851911] rtc_cmos 00:03: setting system clock to 2014-05-22 10:27:35 UTC
(1400754455)
[ 0.852130] PM: Hibernation image not present or could not be loaded.
[ 0.854586] Freeing unused kernel memory: 1000K (ffffffff818b2000 -
ffffffff819ac000)
[ 0.854595] Write protecting the kernel read-only data: 8192k
[ 0.863794] Freeing unused kernel memory: 1224K (ffff8800014ce000 -
ffff880001600000)
[ 0.866675] Freeing unused kernel memory: 388K (ffff88000179f000 -
ffff880001800000)
[ 0.882871] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.897498] systemd-udevd[58]: starting version 204
[ 0.965943] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.965953] ACPI: Thermal Zone [TZ00] (26 C)
[ 0.971528] sky2: driver version 1.30
[ 0.971943] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 0.972418] sky2 0000:09:00.0: irq 44 for MSI/MSI-X
[ 0.973680] sky2 0000:09:00.0 eth0: addr 00:24:54:c1:f5:69
[ 0.984115] ACPI: bus type USB registered
[ 0.984255] usbcore: registered new interface driver usbfs
[ 0.984311] usbcore: registered new interface driver hub
[ 0.991709] SCSI subsystem initialized
[ 0.997362] usbcore: registered new device driver usb
[ 0.998584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.999509] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.999795] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.999827] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 0.999924] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.001219] ehci-pci: EHCI PCI platform driver
[ 1.001853] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.001866] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.001875] usb usb1: Product: UHCI Host Controller
[ 1.001882] usb usb1: Manufacturer: Linux 3.14-1-amd64 uhci_hcd
[ 1.001889] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.002797] hub 1-0:1.0: USB hub found
[ 1.002845] hub 1-0:1.0: 2 ports detected
[ 1.004535] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.004570] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.004606] ehci-pci 0000:00:1d.7: debug port 1
[ 1.008570] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.008920] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0604000
[ 1.009677] libata version 3.00 loaded.
[ 1.020105] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.020316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.020329] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.020337] usb usb2: Product: EHCI Host Controller
[ 1.020344] usb usb2: Manufacturer: Linux 3.14-1-amd64 ehci_hcd
[ 1.020351] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.020945] hub 2-0:1.0: USB hub found
[ 1.020990] hub 2-0:1.0: 8 ports detected
[ 1.044301] hub 1-0:1.0: USB hub found
[ 1.044352] hub 1-0:1.0: 2 ports detected
[ 1.045395] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.045425] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 1.045521] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.045796] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.045807] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.045816] usb usb3: Product: UHCI Host Controller
[ 1.045823] usb usb3: Manufacturer: Linux 3.14-1-amd64 uhci_hcd
[ 1.045830] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.046398] hub 3-0:1.0: USB hub found
[ 1.047030] hub 3-0:1.0: 2 ports detected
[ 1.047799] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.047830] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 1.047927] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.048820] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.048833] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.048842] usb usb4: Product: UHCI Host Controller
[ 1.048849] usb usb4: Manufacturer: Linux 3.14-1-amd64 uhci_hcd
[ 1.048855] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.049434] hub 4-0:1.0: USB hub found
[ 1.049480] hub 4-0:1.0: 2 ports detected
[ 1.050600] ahci 0000:00:1f.2: version 3.0
[ 1.050906] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.051060] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 1.051073] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.054134] scsi0 : ahci
[ 1.054625] scsi1 : ahci
[ 1.063016] scsi2 : ahci
[ 1.068964] scsi3 : ahci
[ 1.069231] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500
irq 45
[ 1.069243] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580
irq 45
[ 1.069253] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600
irq 45
[ 1.069263] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680
irq 45
[ 1.069598] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.069626] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 1.069695] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.070029] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.070041] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.070049] usb usb5: Product: UHCI Host Controller
[ 1.070057] usb usb5: Manufacturer: Linux 3.14-1-amd64 uhci_hcd
[ 1.070065] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.070829] hub 5-0:1.0: USB hub found
[ 1.070878] hub 5-0:1.0: 2 ports detected
[ 1.388221] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.388284] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.388338] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.388382] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.389525] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC66G, max UDMA/133
[ 1.389536] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.390931] ata1.00: configured for UDMA/133
[ 1.391354] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O
PQ: 0 ANSI: 5
[ 1.423289] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 1.423596] sd 0:0:0:0: [sda] Write Protect is off
[ 1.423609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.423743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.477610] sda: sda1 sda2 < sda5 >
[ 1.478988] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.592147] usb 2-8: new high-speed USB device number 3 using ehci-pci
[ 1.739404] usb 2-8: New USB device found, idVendor=0ac8, idProduct=c33f
[ 1.739419] usb 2-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.739431] usb 2-8: Product: WebCam SCB-0340N
[ 1.739439] usb 2-8: Manufacturer: Namuga.
[ 1.804586] PM: Starting manual resume from disk
[ 1.804596] PM: Hibernation image partition 8:5 present
[ 1.804599] PM: Looking for hibernation image.
[ 1.804987] PM: Image not found (code -22)
[ 1.804992] PM: Hibernation image not present or could not be loaded.
[ 1.883533] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.980182] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.152663] usb 3-2: New USB device found, idVendor=0a5c, idProduct=219c
[ 2.152676] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.152685] usb 3-2: Product: Broadcom BCM2070 Bluetooth Device
[ 2.152693] usb 3-2: Manufacturer: Broadcom Corp
[ 2.152701] usb 3-2: SerialNumber: E839DF58C2CB
[ 2.947023] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP
+AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.177058] random: nonblocking pool is initialized
[ 3.189476] systemd[1]: Inserted module 'autofs4'
[ 3.220249] systemd[1]: Set hostname to <cohgnb>.
[ 4.629635] systemd[1]: Cannot add dependency job for unit display-
manager.service, ignoring: Unit display-manager.service failed to load: No such
file or directory. See system logs and 'systemctl status display-
manager.service' for details.
[ 4.630304] systemd[1]: Starting Forward Password Requests to Wall Directory
Watch.
[ 4.630514] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 4.630572] systemd[1]: Starting Remote File Systems (Pre).
[ 4.630619] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.630659] systemd[1]: Starting Syslog Socket.
[ 4.630791] systemd[1]: Listening on Syslog Socket.
[ 4.630840] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.630914] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.630951] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.631025] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.631135] systemd[1]: Starting Arbitrary Executable File Formats File
System Automount Point.
[ 4.631414] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 4.631634] systemd[1]: Starting udev Kernel Socket.
[ 4.631726] systemd[1]: Listening on udev Kernel Socket.
[ 4.631890] systemd[1]: Starting udev Control Socket.
[ 4.631986] systemd[1]: Listening on udev Control Socket.
[ 4.632122] systemd[1]: Starting Dispatch Password Requests to Console
Directory Watch.
[ 4.632270] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 4.632348] systemd[1]: Starting Journal Socket.
[ 4.632506] systemd[1]: Listening on Journal Socket.
[ 4.632578] systemd[1]: Starting Syslog.
[ 4.632616] systemd[1]: Reached target Syslog.
[ 4.632818] systemd[1]: Starting Create static device nodes in /dev...
[ 4.634493] systemd[1]: Mounting Debug File System...
[ 4.636170] systemd[1]: Mounting Huge Pages File System...
[ 4.677292] systemd[1]: Starting Apply Kernel Variables...
[ 4.735381] systemd[1]: Starting Load Kernel Modules...
[ 4.737255] systemd[1]: Starting udev Coldplug all Devices...
[ 4.739782] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.739883] systemd[1]: Starting Journal Service...
[ 4.741738] systemd[1]: Started Journal Service.
[ 4.742383] systemd[1]: Starting Encrypted Volumes.
[ 4.742465] systemd[1]: Reached target Encrypted Volumes.
[ 4.742550] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.744181] systemd[1]: Expecting device dev-disk-by\x2duuid-
c79bbedf\x2d2f4b\x2d4bee\x2da12d\x2d9115acc9288f.device...
[ 4.744313] systemd[1]: Starting File System Check on Root Device...
[ 5.837298] systemd-udevd[143]: starting version 204
[ 6.450375] lp: driver loaded but no devices found
[ 6.641952] ppdev: user-space parallel port driver
[ 6.815133] fuse init (API version 7.22)
[ 6.933450] loop: module loaded
[ 8.768383] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 8.768467] ACPI: Lid Switch [LID0]
[ 8.768701] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.768718] ACPI: Power Button [PWRB]
[ 8.768928] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 8.768941] ACPI: Sleep Button [SLPB]
[ 8.769149] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.769160] ACPI: Power Button [PWRF]
[ 9.049347] [drm] Initialized drm 1.1.0 20060810
[ 9.106220] ACPI: AC Adapter [ADP1] (off-line)
[ 9.113620] ACPI: Battery Slot [BAT1] (battery present)
[ 9.196307] [drm] Memory usable by graphics device = 512M
[ 9.268206] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 9.268238] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.268243] [drm] Driver supports precise vblank timestamp query.
[ 9.268389] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.354987] [drm] initialized overlay support
[ 9.377920] fbcon: inteldrmfb (fb0) is primary device
[ 9.680631] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 9.680695] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev
0x24, class 0x0)
[ 9.680747] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812,
rev 0x18, class 0x0)
[ 9.680849] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11,
class 0x0)
[ 9.692593] bcma: bus0: Bus registered
[ 9.804558] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.988724] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.087588] Console: switching to colour frame buffer device 128x37
[ 10.094970] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 10.094976] i915 0000:00:02.0: registered panic notifier
[ 10.095533] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 10.097590] acpi device:04: registered as cooling_device2
[ 10.097867] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 10.098187] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 10.099055] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 10.099836] ACPI Warning: SystemIO range
0x0000000000001028-0x000000000000102f conflicts with OpRegion
0x0000000000001000-0x000000000000107f (\PMIO) (20131218/utaddress-258)
[ 10.099858] ACPI Warning: SystemIO range
0x0000000000001028-0x000000000000102f conflicts with OpRegion
0x0000000000001000-0x000000000000102f (\_SB_.PCI0.LPC0.PMIO)
(20131218/utaddress-258)
[ 10.099873] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 10.099887] ACPI Warning: SystemIO range
0x0000000000001180-0x00000000000011af conflicts with OpRegion
0x0000000000001180-0x00000000000011af (\_SB_.PCI0.LPC0.GPOX)
(20131218/utaddress-258)
[ 10.099902] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 10.100099] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.100953] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.188511] samsung_laptop: Disabling ACPI video driver
[ 10.222012] samsung_laptop: enabled workaround for brightness stepping quirk
[ 10.236395] samsung_laptop: detected SABI interface: SwSmi@
[ 10.414020] Bluetooth: Core ver 2.18
[ 10.414086] NET: Registered protocol family 31
[ 10.414092] Bluetooth: HCI device and connection manager initialized
[ 10.414113] Bluetooth: HCI socket layer initialized
[ 10.414123] Bluetooth: L2CAP socket layer initialized
[ 10.414154] Bluetooth: SCO socket layer initialized
[ 10.510717] iTCO_vendor_support: vendor-support=0
[ 10.965572] cfg80211: Calling CRDA to update world regulatory domain
[ 11.131196] usbcore: registered new interface driver btusb
[ 11.136151] psmouse serio1: elantech: assuming hardware version 2 (with
firmware version 0x040216)
[ 11.175855] psmouse serio1: elantech: Synaptics capabilities query result
0x09, 0x14, 0x0b.
[ 11.188776] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 11.188871] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 11.189235] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.311711] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input8
[ 11.421133] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.421477] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.819408] Support for cores revisions 0x17 and 0x18 disabled by module
param allhwsupport=0. Try b43.allhwsupport=1
[ 11.819672] b43: probe of bcma0:0 failed with error -524
[ 11.819776] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 11.892259] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 16
[ 11.985901] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.167611] media: Linux media interface: v0.10
[ 12.203167] Linux video capture interface: v2.00
[ 12.845072] uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f)
[ 12.848552] input: WebCam SCB-0340N as
/devices/pci0000:00/0000:00:1d.7/usb2/2-8/2-8:1.0/input/input11
[ 12.849148] usbcore: registered new interface driver uvcvideo
[ 12.849158] USB Video Class driver (1.1.1)
[ 13.597259] cfg80211: World regulatory domain updated:
[ 13.597269] cfg80211: DFS Master region: unset
[ 13.597273] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 13.597278] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 13.597283] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 13.597287] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm)
[ 13.597291] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm)
[ 13.597296] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm)
[ 13.597300] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm)
[ 13.597334] cfg80211: Calling CRDA for country: US
[ 13.845235] cfg80211: Regulatory domain changed to country: US
[ 13.845245] cfg80211: DFS Master region: unset
[ 13.845249] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 13.845254] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000
mBm)
[ 13.845259] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700
mBm)
[ 13.845263] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300
mBm)
[ 13.845267] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000
mBm)
[ 13.845272] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
4000 mBm)
[ 14.183038] Adding 2073596k swap on /dev/sda5. Priority:-1 extents:1
across:2073596k
[ 19.005065] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 25.881310] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.881321] Bluetooth: BNEP filters: protocol multicast
[ 25.881343] Bluetooth: BNEP socket layer initialized
[ 26.173157] Bluetooth: RFCOMM TTY layer initialized
[ 26.173191] Bluetooth: RFCOMM socket layer initialized
[ 26.173218] Bluetooth: RFCOMM ver 1.11
[ 27.854493] brcmsmac bcma0:0: firmware: direct-loading firmware
brcm/bcm43xx-0.fw
[ 27.914110] brcmsmac bcma0:0: firmware: direct-loading firmware
brcm/bcm43xx_hdr-0.fw
[ 28.219610] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false
(implement)
[ 28.219784] brcmsmac bcma0:0: brcms_ops_config: change power-save mode:
false (implement)
[ 28.220371] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.292981] sky2 0000:09:00.0 eth0: enabling interface
[ 28.294089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.262939] wlan0: authenticate with 84:1b:5e:4e:99:e3
[ 31.263049] wlan0: send auth to 84:1b:5e:4e:99:e3 (try 1/3)
[ 31.264673] wlan0: authenticated
[ 31.268130] wlan0: associate with 84:1b:5e:4e:99:e3 (try 1/3)
[ 31.271715] wlan0: RX AssocResp from 84:1b:5e:4e:99:e3 (capab=0x411 status=0
aid=1)
[ 31.272712] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed:
associated
[ 31.272897] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true
(implement)
[ 31.273110] wlan0: associated
[ 31.273208] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
-- Package-specific info:
** Version:
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=8ded205f-0405-4290-92e0-c865945f4d03 ro quiet
** Not tainted
** Kernel log:
[ 28.294089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.262939] wlan0: authenticate with 84:1b:5e:4e:99:e3
[ 31.263049] wlan0: send auth to 84:1b:5e:4e:99:e3 (try 1/3)
[ 31.264673] wlan0: authenticated
[ 31.268130] wlan0: associate with 84:1b:5e:4e:99:e3 (try 1/3)
[ 31.271715] wlan0: RX AssocResp from 84:1b:5e:4e:99:e3 (capab=0x411 status=0 aid=1)
[ 31.272712] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 31.272897] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 31.273110] wlan0: associated
[ 31.273208] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.650864] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 220.924062] perf samples too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 356.991150] PM: Syncing filesystems ... done.
[ 357.209936] PM: Preparing system for mem sleep
[ 357.227364] (NULL device *): firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 357.256607] (NULL device *): firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 357.256680] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 357.259284] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 357.260203] PM: Entering mem sleep
[ 357.260237] Suspending console(s) (use no_console_suspend to debug)
[ 357.260680] wlan0: deauthenticating from 84:1b:5e:4e:99:e3 by local choice (reason=3)
[ 357.261891] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 357.261900] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 357.261904] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 357.279303] cfg80211: Calling CRDA to update world regulatory domain
[ 357.279722] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 357.279882] sd 0:0:0:0: [sda] Stopping disk
[ 357.752268] PM: suspend of devices complete after 491.717 msecs
[ 357.752558] PM: late suspend of devices complete after 0.278 msecs
[ 357.753675] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
[ 357.940592] PM: noirq suspend of devices complete after 188.019 msecs
[ 357.940624] ACPI: Preparing to enter system sleep state S3
[ 357.942357] PM: Saving platform NVS memory
[ 357.942366] Disabling non-boot CPUs ...
[ 357.944383] smpboot: CPU 1 is now offline
[ 357.944893] ACPI: Low-level resume complete
[ 357.944893] PM: Restoring platform NVS memory
[ 357.944893] CPU0: Thermal monitoring handled by SMI
[ 357.944893] Enabling non-boot CPUs ...
[ 357.944893] x86: Booting SMP configuration:
[ 357.944893] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 357.944277] CPU1 microcode updated early to revision 0x107, date = 2009-08-25
[ 357.961841] CPU1 is up
[ 357.964097] ACPI : EC: 0 stale EC events cleared
[ 357.964110] ACPI: Waking up from system sleep state S3
[ 358.448932] PM: noirq resume of devices complete after 236.735 msecs
[ 358.449243] PM: early resume of devices complete after 0.269 msecs
[ 358.456284] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 358.460682] usb usb1: root hub lost power or was reset
[ 358.460891] usb usb3: root hub lost power or was reset
[ 358.461097] usb usb4: root hub lost power or was reset
[ 358.461306] usb usb5: root hub lost power or was reset
[ 358.463655] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
[ 358.792217] ata3: SATA link down (SStatus 0 SControl 300)
[ 358.792272] ata2: SATA link down (SStatus 0 SControl 300)
[ 358.792314] ata4: SATA link down (SStatus 0 SControl 300)
[ 358.804260] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[ 359.048248] usb 2-8: reset high-speed USB device number 3 using ehci-pci
[ 360.024094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 360.031522] ata1.00: configured for UDMA/133
[ 360.044350] sd 0:0:0:0: [sda] Starting disk
[ 360.369070] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 360.369256] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 360.369335] brcmsmac bcma0:0: brcms_ops_bss_info_changed: cqm change: threshold 0, hys 0 (implement)
[ 360.369339] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 360.369342] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 360.369408] PM: resume of devices complete after 1920.154 msecs
[ 360.370520] PM: Finishing wakeup.
[ 360.370525] Restarting tasks ... done.
[ 360.552495] cfg80211: World regulatory domain updated:
[ 360.552506] cfg80211: DFS Master region: unset
[ 360.552511] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 360.552518] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 360.552524] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 360.552529] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 360.552535] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 360.552541] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 360.552547] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 361.111928] wlan0: authenticate with 84:1b:5e:4e:99:e3
[ 361.113036] wlan0: send auth to 84:1b:5e:4e:99:e3 (try 1/3)
[ 361.114657] wlan0: authenticated
[ 361.124110] wlan0: associate with 84:1b:5e:4e:99:e3 (try 1/3)
[ 361.127745] wlan0: RX AssocResp from 84:1b:5e:4e:99:e3 (capab=0x411 status=0 aid=1)
[ 361.128701] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 361.128717] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 361.128726] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 361.128756] wlan0: associated
[ 386.516266] ACPI Error: [\_SB_.VDRV] Namespace lookup failure, AE_NOT_FOUND (20131218/psargs-359)
[ 386.516292] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.H_EC._Q51] (Node ffff88003d8406a0), AE_NOT_FOUND (20131218/psparse-536)
[ 393.924238] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 394.101289] usb 5-1: New USB device found, idVendor=045e, idProduct=0084
[ 394.101304] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 394.101314] usb 5-1: Product: Basic Optical Mouse
[ 394.101323] usb 5-1: Manufacturer: Microsoft
[ 394.335080] hidraw: raw HID events driver (C) Jiri Kosina
[ 394.359783] usbcore: registered new interface driver usbhid
[ 394.359793] usbhid: USB HID core driver
[ 394.404337] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:045E:0084.0001/input/input13
[ 394.404903] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.3-1/input0
[ 1319.934980] perf samples too long (5030 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: N150P/N210P/N220P
product_version: Not Applicable
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: Phoenix Technologies Ltd.
bios_version: 01KY.M008.20100430.RHU
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: N150P/N210P/N220P
board_version: Not Applicable
** Loaded modules:
hid_generic
usbhid
hid
ctr
ccm
rfcomm
bnep
binfmt_misc
uinput
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
snd_hda_codec_realtek
joydev
iTCO_wdt
btusb
cfg80211
snd_hda_codec_generic
ssb
mmc_core
rng_core
pcmcia
pcmcia_core
iTCO_vendor_support
bluetooth
6lowpan_iphc
psmouse
serio_raw
samsung_laptop
rfkill
pcspkr
evdev
snd_hda_intel
coretemp
snd_hda_codec
snd_hwdep
bcma
lpc_ich
mfd_core
i2c_i801
snd_pcm
snd_timer
snd
soundcore
tpm_tis
tpm
i915
drm_kms_helper
battery
ac
acpi_cpufreq
drm
video
i2c_algo_bit
i2c_core
processor
button
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ahci
libahci
ehci_pci
uhci_hcd
ehci_hcd
libata
scsi_mod
usbcore
usb_common
sky2
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 00:24:54:c1:f5:69 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether e8:39:df:b6:73:7b brd ff:ff:ff:ff:ff:ff
inet 192.168.0.4/24 brd 192.168.0.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::ea39:dfff:feb6:737b/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 978573 2959 0 0 0 0 0 0 978573 2959 0 0 0 0 0 0
wlan0: 15489888 14249 0 0 0 0 0 0 7887319 13040 0 0 0 0 0 0
*** Protocol statistics:
Ip:
14262 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
14134 incoming packets delivered
13026 requests sent out
32 outgoing packets dropped
Icmp:
64 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 64
64 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 64
IcmpMsg:
InType3: 64
OutType3: 64
Tcp:
27 active connections openings
2 passive connection openings
0 failed connection attempts
2 connection resets received
0 connections established
13415 segments received
12485 segments send out
4 segments retransmited
0 bad segments received.
2 resets sent
Udp:
446 packets received
64 packets to unknown port received.
0 packet receive errors
483 packets sent
UdpLite:
TcpExt:
5 TCP sockets finished time wait in fast timer
126 delayed acks sent
9 delayed acks further delayed because of locked socket
Quick ack mode was activated 9 times
4 packets directly queued to recvmsg prequeue.
8995 packet headers predicted
200 acknowledgments not containing data payload received
2669 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
3 fast retransmits
1 forward retransmits
TCPLossProbes: 59
TCPLossProbeRecovery: 4
9 DSACKs sent for old packets
2 DSACKs sent for out of order packets
10 DSACKs received
2 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 5
TCPSackShiftFallback: 7
TCPRcvCoalesce: 2194
TCPOFOQueue: 1142
TCPOFOMerge: 2
TCPSpuriousRtxHostQueues: 7
TCPAutoCorking: 530
IpExt:
InMcastPkts: 95
OutMcastPkts: 36
InBcastPkts: 164
InOctets: 15296033
OutOctets: 7446241
InMcastOctets: 11371
OutMcastOctets: 4461
InBcastOctets: 31426
InNoECTPkts: 14262
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010]
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 18d0 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012]
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0380000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0100000-f01fffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 40200000-403fffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 40800000-409fffff
Prefetchable memory behind bridge: 0000000040a00000-0000000040bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0604000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=11, subordinate=11, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 18e8 [size=8]
Region 1: I/O ports at 18dc [size=4]
Region 2: I/O ports at 18e0 [size=8]
Region 3: I/O ports at 18d8 [size=4]
Region 4: I/O ports at 18c0 [size=16]
Region 5: Memory at f0604400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
05:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 002 Device 003: ID 0ac8:c33f Z-Star Microelectronics Corp. Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a5c:219c Broadcom Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 17-2
ii linux-base 3.5
ii module-init-tools 17-2
Versions of packages linux-image-3.14-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.14-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-10
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.41
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.41
ii firmware-linux-nonfree 0.41
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: