Bug#746801: linux-image-3.14-1-amd64: no longer displays video properly (on Intel HD Graphics P4600)
Package: src:linux
Version: 3.14.2-1
Severity: normal
Dear Maintainer,
With 3.14, videos no longer display correctly; the display stutters
and most of the time only updates part of the screen.
Two things I've noticed...
The first is that shortly after boot, the kernel logs
May 3 19:24:10 heffalump kernel: [ 1702.764839] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 40
May 3 19:24:10 heffalump kernel: [ 1702.764842] Raw EDID:
May 3 19:24:10 heffalump kernel: [ 1702.764844] 00 ff ff ff ff ff ff 00 22 f0 f7 26 01 01 01 01
May 3 19:24:10 heffalump kernel: [ 1702.764845] 25 12 01 03 80 36 23 78 ee ce 50 a3 54 4c 99 26
May 3 19:24:10 heffalump kernel: [ 1702.764846] 0f 50 54 a5 6b 80 81 40 a9 00 a9 40 b3 00 d1 00
May 3 19:24:10 heffalump kernel: [ 1702.764846] 01 01 01 01 01 01 28 3c 80 a3 ff ff ff ff ff ff
May 3 19:24:10 heffalump kernel: [ 1702.764847] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
May 3 19:24:10 heffalump kernel: [ 1702.764848] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
May 3 19:24:10 heffalump kernel: [ 1702.764849] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
May 3 19:24:10 heffalump kernel: [ 1702.764850] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
May 3 19:38:04 heffalump kernel: [ 2537.633820] mei_me 0000:00:16.0: less data available than length=00000001.
May 3 19:38:04 heffalump kernel: [ 2537.633856] mei_me 0000:00:16.0: unexpected reset: dev_state = ENABLED
May 3 19:38:04 heffalump kernel: [ 2538.133985] mei_me 0000:00:16.0: wd: not connected.
The "wd: not connected" line repeats endessly, multiple times per
second. I've verified this across multiple reboots.
The second is that X logs EDID info multiple times per second as well,
which may be related...
3.13 works fine on the same hardware; the CPU is a Xeon E3-1245v3, on
a Supermicro X10SAE with a C226 chipset, and the screen is connected
via DVI.
Regards,
Stephen
-- Package-specific info:
** Version:
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.2-1 (2014-04-28)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=/dev/mapper/vg--fast-root ro quiet
** Not tainted
** Kernel log:
[ 5031.583422] mei_me 0000:00:16.0: wd: not connected.
[ 5031.583426] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084269] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084282] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084332] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084337] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084341] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084345] mei_me 0000:00:16.0: wd: not connected.
[ 5032.084349] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585194] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585210] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585263] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585268] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585272] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585276] mei_me 0000:00:16.0: wd: not connected.
[ 5032.585281] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086117] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086128] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086170] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086174] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086178] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086182] mei_me 0000:00:16.0: wd: not connected.
[ 5033.086186] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587010] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587024] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587075] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587079] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587084] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587087] mei_me 0000:00:16.0: wd: not connected.
[ 5033.587092] mei_me 0000:00:16.0: wd: not connected.
[ 5034.087939] mei_me 0000:00:16.0: wd: not connected.
[ 5034.087953] mei_me 0000:00:16.0: wd: not connected.
[ 5034.088004] mei_me 0000:00:16.0: wd: not connected.
[ 5034.088009] mei_me 0000:00:16.0: wd: not connected.
[ 5034.088013] mei_me 0000:00:16.0: wd: not connected.
[ 5034.088017] mei_me 0000:00:16.0: wd: not connected.
[ 5034.088021] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588835] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588851] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588906] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588913] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588920] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588927] mei_me 0000:00:16.0: wd: not connected.
[ 5034.588934] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089742] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089754] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089795] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089799] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089803] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089807] mei_me 0000:00:16.0: wd: not connected.
[ 5035.089812] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590672] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590687] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590740] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590745] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590750] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590754] mei_me 0000:00:16.0: wd: not connected.
[ 5035.590759] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091632] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091645] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091696] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091700] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091704] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091708] mei_me 0000:00:16.0: wd: not connected.
[ 5036.091713] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592556] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592569] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592618] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592622] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592626] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592630] mei_me 0000:00:16.0: wd: not connected.
[ 5036.592635] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093468] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093479] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093520] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093524] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093528] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093533] mei_me 0000:00:16.0: wd: not connected.
[ 5037.093537] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594361] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594376] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594427] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594432] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594436] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594440] mei_me 0000:00:16.0: wd: not connected.
[ 5037.594444] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095332] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095351] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095408] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095412] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095416] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095420] mei_me 0000:00:16.0: wd: not connected.
[ 5038.095425] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596231] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596260] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596307] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596311] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596315] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596319] mei_me 0000:00:16.0: wd: not connected.
[ 5038.596323] mei_me 0000:00:16.0: wd: not connected.
** Model information
sys_vendor: Supermicro
product_name: X10SAE
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.1
board_vendor: Supermicro
board_name: X10SAE
board_version: 1.01
** Loaded modules:
xt_multiport
iptable_filter
ip_tables
x_tables
nfnetlink_queue
nfnetlink_log
nfnetlink
bnep
rfcomm
snd_hrtimer
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
binfmt_misc
rpcsec_gss_krb5
nfsv4
dns_resolver
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
sha256_ssse3
sha256_generic
tcp_diag
inet_diag
autofs4
loop
grip
ns558
gameport
nct6775
jc42
hwmon_vid
fuse
parport_pc
ppdev
lp
parport
dm_crypt
snd_hda_codec_realtek
snd_hda_codec_generic
iTCO_wdt
iTCO_vendor_support
cx22702
cx88_dvb
cx88_vp3054_i2c
videobuf_dvb
dvb_core
ir_lirc_codec
ir_mce_kbd_decoder
lirc_dev
ir_jvc_decoder
ir_sanyo_decoder
ir_sony_decoder
ir_rc6_decoder
ir_rc5_decoder
ir_nec_decoder
rc_hauppauge
snd_usb_audio
snd_usbmidi_lib
tuner_simple
tuner_types
tuner
sermouse
serport
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
btusb
pcspkr
psmouse
joydev
evdev
pwc
cx8802
usblp
videobuf2_vmalloc
cx8800
videobuf2_memops
cx88_alsa
videobuf2_core
serio_raw
cx88xx
btcx_risc
tveeprom
videobuf_dma_sg
videobuf_core
rc_core
i2c_i801
v4l2_common
bluetooth
videodev
media
6lowpan_iphc
snd_hda_intel
snd_seq_midi
cdc_acm
rfkill
snd_seq_midi_event
snd_hda_codec
snd_rawmidi
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_seq
snd_pcm
lpc_ich
snd_seq_device
mfd_core
snd_timer
battery
i915
snd
tpm_tis
tpm
video
drm_kms_helper
drm
mei_me
processor
button
mei
soundcore
ext4
crc16
mbcache
jbd2
dm_mod
raid1
md_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
hid_logitech
ff_memless
hid_logitech_dj
usbhid
hid
mptsas
scsi_transport_sas
mptscsih
mptbase
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aic7xxx
scsi_transport_spi
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
ehci_pci
xhci_hcd
ehci_hcd
aesni_intel
aes_x86_64
lrw
gf128mul
libata
glue_helper
ablk_helper
cryptd
igb
i2c_algo_bit
scsi_mod
i2c_core
dca
e1000e
usbcore
usb_common
ptp
pps_core
fan
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3 Processor Integrated Graphics Controller [8086:041a] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 65
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 66
Region 0: Memory at f7f24000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 64
Region 0: Memory at f7f30000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0c0 [size=8]
Region 1: Memory at f7f2e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:153a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7f2d000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f060 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f2c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 67
Region 0: Memory at f7f20000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: de200000-de3fffff
Prefetchable memory behind bridge: 000000081fe00000-000000081fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7800000-f7afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f3000000-f70fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7f2b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation C226 Series Chipset Family Server Advanced SKU LPC Controller [8086:8c56] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 62
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f040 [size=32]
Region 5: Memory at f7f2a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7f29000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0580 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 0: Memory at f7f28000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7b00000 (32-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at f7c00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 02)
Subsystem: LSI Logic / Symbios Logic Device [1000:3090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at f7800000 [disabled] [size=2M]
Capabilities: <access denied>
Kernel driver in use: mptsas
04:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f3000000-f70fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
05:00.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
05:00.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
05:00.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
05:01.0 SCSI storage controller [0100]: Adaptec AIC-7892B U160/m [9005:0081] (rev 02)
Subsystem: Adaptec 19160 Ultra160 SCSI Controller [9005:62a1]
Physical Slot: 2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
BIST result: 00
Region 0: I/O ports at c000 [disabled] [size=256]
Region 1: Memory at f7025000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7024000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f7020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
07:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: I/O ports at b050 [size=8]
Region 1: I/O ports at b040 [size=4]
Region 2: I/O ports at b030 [size=8]
Region 3: I/O ports at b020 [size=4]
Region 4: I/O ports at b000 [size=32]
Region 5: Memory at f7d00000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 004 Device 006: ID 0bc7:0004 X10 Wireless Technology, Inc. X10 Receiver
Bus 004 Device 005: ID 03eb:6124 Atmel Corp. at91sam SAMBA bootloader
Bus 004 Device 004: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 004 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 007: ID 050d:0131 Belkin Components Bluetooth Device with trace filter
Bus 003 Device 006: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 003 Device 005: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
Bus 003 Device 004: ID 03f0:2f24 Hewlett-Packard LP2475w Monitor Hub
Bus 003 Device 003: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (200, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.14-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.14-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.14-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false
linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true
Reply to: