Bug#731072: linux-image-3.12-1-amd64 does not boot unless append="rootfstype=ext4"
Package: src:linux
Followup-For: Bug #731072
Dear Maintainer,
After updating to linux-image-3.12-1-amd64 (debian experimental), the system does not boot.
Fortunately, it provides minimal initramfs where I can mount the filesystems manually.
Searching the Web, I managed to append rootfstype=ext4 to lilo.conf and it boots, with some
errors though. You will find working and not working dmesg outputs at the end of this message.
Thank you,
Ricardo Peliquero
-- Package-specific info:
** Version:
Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.12.6-1 (2013-12-21)
** Command line:
auto BOOT_IMAGE=Linux ro root=803 rootfstype=ext4
** Not tainted
** Kernel log:
[ 7.536738] radeon 0000:01:05.0: setting latency timer to 64
[ 7.569004] [drm] ring test on 0 succeeded in 0 usecs
[ 7.569109] [drm] ring test on 3 succeeded in 1 usecs
[ 7.569353] [drm] Enabling audio 0 support
[ 7.569426] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.569488] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.570229] [drm] radeon atom DIG backlight initialized
[ 7.570276] [drm] Radeon Display Connectors
[ 7.570319] [drm] Connector 0:
[ 7.570361] [drm] VGA-1
[ 7.570405] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.570452] [drm] Encoders:
[ 7.570494] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.570537] [drm] Connector 1:
[ 7.570579] [drm] LVDS-1
[ 7.570622] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.570669] [drm] Encoders:
[ 7.570711] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 7.570754] [drm] Connector 2:
[ 7.570795] [drm] HDMI-A-1
[ 7.570837] [drm] HPD1
[ 7.570880] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 7.570927] [drm] Encoders:
[ 7.570968] [drm] DFP1: INTERNAL_UNIPHY
[ 7.571115] [drm] radeon: power management initialized
[ 7.580458] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 7.639293] microcode: CPU1: patch_level=0x010000c8
[ 7.639474] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.920127] cfg80211: Calling CRDA to update world regulatory domain
[ 7.927409] kvm: Nested Virtualization enabled
[ 7.927453] kvm: Nested Paging enabled
[ 7.969761] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform
[ 8.003511] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 8.003579] b43: probe of bcma0:0 failed with error -524
[ 8.003660] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 8.049468] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 8.225370] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform
[ 8.237509] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.492840] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 646827
[ 8.562220] cfg80211: World regulatory domain updated:
[ 8.562339] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.562420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562500] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562579] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.562657] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562736] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562835] cfg80211: Calling CRDA for country: US
[ 8.566352] [drm] fb mappable at 0xC0141000
[ 8.566404] [drm] vram apper at 0xC0000000
[ 8.566448] [drm] size 4325376
[ 8.566491] [drm] fb depth is 24
[ 8.566533] [drm] pitch is 5632
[ 8.566730] fbcon: radeondrmfb (fb0) is primary device
[ 8.575956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input19
[ 8.592084] cfg80211: Regulatory domain changed to country: US
[ 8.592086] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.592091] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.592094] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.592097] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.592099] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.592101] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.592104] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.592106] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 8.632724] Console: switching to colour frame buffer device 170x48
[ 8.646852] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 8.646972] radeon 0000:01:05.0: registered panic notifier
[ 8.647102] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
[ 9.636462] Adding 2312188k swap on /dev/sda2. Priority:-1 extents:1 across:2312188k
[ 9.689297] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.250577] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 11.457593] fuse init (API version 7.22)
[ 11.527992] loop: module loaded
[ 11.947653] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 11.958779] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 12.149667] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.029295] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 13.044438] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 13.291870] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 13.295903] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 13.300682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.109675] wlan0: authenticate with 00:22:75:da:c1:a1
[ 14.116238] wlan0: send auth to 00:22:75:da:c1:a1 (try 1/3)
[ 14.122897] wlan0: authenticated
[ 14.128788] wlan0: associate with 00:22:75:da:c1:a1 (try 1/3)
[ 14.183611] wlan0: RX AssocResp from 00:22:75:da:c1:a1 (capab=0x431 status=0 aid=8)
[ 14.188821] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 14.193935] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 14.199054] wlan0: associated
[ 14.203220] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 14.207460] cfg80211: Calling CRDA for country: NL
[ 14.218392] cfg80211: Regulatory domain changed to country: NL
[ 14.222524] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.226694] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.230871] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.234976] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.239019] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 14.242994] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 18.967003] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 22.782025] lp: driver loaded but no devices found
[ 22.814793] ppdev: user-space parallel port driver
** Model information
sys_vendor: Hewlett-Packard
product_name: HP 425
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68DVA Ver. F.03
board_vendor: Hewlett-Packard
board_name: 1475
board_version: KBC Version 72.0E
** Loaded modules:
parport_pc
ppdev
lp
parport
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
loop
fuse
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
kvm_amd
cfg80211
kvm
ssb
psmouse
serio_raw
hp_wmi
sparse_keymap
pcspkr
radeon
mmc_core
rng_core
pcmcia
pcmcia_core
ttm
drm_kms_helper
drm
microcode
k10temp
i2c_algo_bit
evdev
sp5100_tco
i2c_piix4
snd_hda_codec_hdmi
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
i2c_core
snd_hda_codec_idt
edac_mce_amd
edac_core
snd_hda_intel
snd_hda_codec
snd_hwdep
wmi
battery
snd_pcm_oss
btusb
snd_mixer_oss
acpi_cpufreq
ac
button
processor
video
snd_pcm
bluetooth
snd_page_alloc
snd_timer
snd
rfkill
shpchp
soundcore
bcma
ext4
crc16
mbcache
jbd2
sr_mod
cdrom
sg
sd_mod
crc_t10dif
crct10dif_common
thermal
fan
thermal_sys
ahci
libahci
libata
ohci_pci
ohci_hcd
ehci_pci
ehci_hcd
r8169
mii
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4200000-d43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d3200000-d41fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2200000-d31fffff
Prefetchable memory behind bridge: 00000000d1100000-00000000d20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: d2100000-d21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 6018 [size=8]
Region 1: I/O ports at 6024 [size=4]
Region 2: I/O ports at 6010 [size=8]
Region 3: I/O ports at 6020 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at d440b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d440a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4409000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4310000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at d0010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
06:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1483]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: bcma-pci-bridge
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0461:4db6 Primax Electronics, Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (x86_64)
Kernel: Linux 3.12-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.12-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
Versions of packages linux-image-3.12-1-amd64 recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-97
Versions of packages linux-image-3.12-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii lilo 1:24.0-2
pn linux-doc-3.12 <none>
Versions of packages linux-image-3.12-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.40
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.12-1-amd64/postinst/depmod-error-initrd-3.12-1-amd64: false
linux-image-3.12-1-amd64/prerm/removing-running-kernel-3.12-1-amd64: true
-- dmesg output for appended lilo.conf:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.12.6-1 (2013-12-21)
[ 0.000000] Command line: auto BOOT_IMAGE=Linux ro root=803 rootfstype=ext4
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afceffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afcf0000-0x00000000afdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.03 08/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
[ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
[ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafceffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafbfffff] page 2M
[ 0.000000] [mem 0xafc00000-0xafceffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xafeff000-0xafefffff]
[ 0.000000] [mem 0xafeff000-0xafefffff] page 4k
[ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f264000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000f2aa0 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 00000000afefe038 00038 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HPQOEM 307E 00000003 HP 00000001)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000afede000 1B406 (v01 HPQOEM SB700 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000afe8f000 00040
[ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000afedb000 00038 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000afeda000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffa000-0x13fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xafceffff]
[ 0.000000] node 0: [mem 0xafeff000-0xafefffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 982159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9790 pages used for memmap
[ 0.000000] DMA32 zone: 716017 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafcf0000-0xafdcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafdcf000-0xafecefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafecf000-0xafefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85888 r8192 d20608 u524288
[ 0.000000] pcpu-alloc: s85888 r8192 d20608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 968708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=803 rootfstype=ext4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
[ 0.000000] Memory: 3716184K/3928636K available (4697K kernel code, 679K rwdata, 1592K rodata, 968K init, 932K bss, 212452K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2194.412 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.82 BogoMIPS (lpj=8777648)
[ 0.000077] pid_max: default: 32768 minimum: 301
[ 0.000143] Security Framework initialized
[ 0.000182] AppArmor: AppArmor disabled by boot time parameter
[ 0.000219] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000525] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001910] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002566] Mount-cache hash table entries: 256
[ 0.002805] Initializing cgroup subsys memory
[ 0.002856] Initializing cgroup subsys devices
[ 0.002894] Initializing cgroup subsys freezer
[ 0.002930] Initializing cgroup subsys net_cls
[ 0.002967] Initializing cgroup subsys blkio
[ 0.003004] Initializing cgroup subsys perf_event
[ 0.003061] tseg: 00aff00000
[ 0.003064] CPU: Physical Processor ID: 0
[ 0.003100] CPU: Processor Core ID: 0
[ 0.003137] mce: CPU supports 6 MCE banks
[ 0.003178] LVT offset 0 assigned for vector 0xf9
[ 0.003216] process: using AMD E400 aware idle routine
[ 0.003255] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.003255] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.003255] tlb_flushall_shift: 4
[ 0.003379] Freeing SMP alternatives memory: 20K (ffffffff8199d000 - ffffffff819a2000)
[ 0.004206] ACPI: Core revision 20130725
[ 0.008865] ACPI: All ACPI Tables successfully acquired
[ 0.038563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078315] smpboot: CPU0: AMD Athlon(tm) II P340 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
[ 0.183928] Performance Events: AMD PMU driver.
[ 0.183998] ... version: 0
[ 0.184034] ... bit width: 48
[ 0.184070] ... generic registers: 4
[ 0.184105] ... value mask: 0000ffffffffffff
[ 0.184141] ... max period: 00007fffffffffff
[ 0.184177] ... fixed-purpose events: 0
[ 0.184213] ... event mask: 000000000000000f
[ 0.184465] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184638] smpboot: Booting Node 0, Processors # 1 OK
[ 0.197810] Brought up 2 CPUs
[ 0.197859] smpboot: Total of 2 processors activated (8777.64 BogoMIPS)
[ 0.197887] process: System has AMD C1E enabled
[ 0.197899] process: Switch to broadcast mode on CPU1
[ 0.198462] process: Switch to broadcast mode on CPU0
[ 0.202093] devtmpfs: initialized
[ 0.206309] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[ 0.206573] NET: Registered protocol family 16
[ 0.206720] cpuidle: using governor ladder
[ 0.206760] cpuidle: using governor menu
[ 0.206799] node 0 link 0: io port [0, ffffff]
[ 0.206802] TOM: 00000000c0000000 aka 3072M
[ 0.206839] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.206841] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.206844] node 0 link 0: mmio [d0000000, d41fffff]
[ 0.206846] node 0 link 0: mmio [d4200000, d43fffff]
[ 0.206848] node 0 link 0: mmio [d4400000, dfffffff]
[ 0.206850] node 0 link 0: mmio [e0000000, e0ffffff] ==> none
[ 0.206852] node 0 link 0: mmio [e1000000, ffb7ffff] ==> [f0000000, ffb7ffff]
[ 0.206854] TOM2: 0000000140000000 aka 5120M
[ 0.206891] bus: [bus 00-1f] on node 0 link 0
[ 0.206892] bus: 00 [io 0x0000-0xffff]
[ 0.206894] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.206895] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.206897] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.206937] ACPI: bus type PCI registered
[ 0.206974] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.207082] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.207123] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.219416] PCI: Using configuration type 1 for base access
[ 0.219651] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.219691] mtrr: probably your BIOS does not setup all CPUs.
[ 0.219728] mtrr: corrected configuration.
[ 0.220351] bio: create slab <bio-0> at 0
[ 0.221064] ACPI: Added _OSI(Module Device)
[ 0.221101] ACPI: Added _OSI(Processor Device)
[ 0.221137] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.221173] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.222261] ACPI: EC: Look up EC in DSDT
[ 0.262106] ACPI Error: No handler for Region [ECRM] (ffff88013b2902b8) [EmbeddedControl] (20130725/evregion-162)
[ 0.262217] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
[ 0.262322] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b285bc8), AE_NOT_EXIST (20130725/psparse-536)
[ 0.262493] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b285bc8), AE_NOT_EXIST (20130725/uteval-103)
[ 0.290171] ACPI: Interpreter enabled
[ 0.290227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.290335] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.290452] ACPI: (supports S0 S3 S4 S5)
[ 0.290490] ACPI: Using IOAPIC for interrupt routing
[ 0.290726] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290935] ACPI: No dock devices found.
[ 0.299724] ACPI: Power Resource [APPR] (off)
[ 0.443832] ACPI: Power Resource [PFN0] (off)
[ 0.443917] ACPI: Power Resource [PFN1] (off)
[ 0.443995] ACPI: Power Resource [PFN2] (off)
[ 0.444074] ACPI: Power Resource [PFN3] (off)
[ 0.444148] ACPI: Power Resource [PFN4] (off)
[ 0.444836] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.444912] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.444952] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.445150] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored
[ 0.445199] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.445243] acpi PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.445456] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
[ 0.445493] PCI host bridge to bus 0000:00
[ 0.445531] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.445569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.445606] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.445643] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.445681] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.445719] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.445756] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.445794] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.445832] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.445869] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.445907] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.445945] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.445982] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.446020] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.446058] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.446095] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.446158] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.446262] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[ 0.446354] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.446390] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.446430] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.446506] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.446541] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.446581] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.446655] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.446695] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.446734] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.446819] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.446837] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
[ 0.446847] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
[ 0.446856] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
[ 0.446865] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
[ 0.446874] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
[ 0.446884] pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
[ 0.446993] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.447006] pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
[ 0.447105] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.447180] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.447199] pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
[ 0.447277] pci 0000:00:12.2: supports D1 D2
[ 0.447279] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.447320] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.447395] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.447408] pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
[ 0.447505] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.447580] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.447598] pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
[ 0.447676] pci 0000:00:13.2: supports D1 D2
[ 0.447678] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.447719] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.447794] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.447920] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.447941] pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.448003] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.448041] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.448111] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.448235] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.448326] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.448339] pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
[ 0.448455] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.448469] pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
[ 0.448594] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.448612] pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
[ 0.448691] pci 0000:00:16.2: supports D1 D2
[ 0.448693] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.448769] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.448832] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.448890] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.448948] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.449010] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.449157] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.449166] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.449170] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
[ 0.449175] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
[ 0.449186] pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
[ 0.449204] pci 0000:01:05.0: supports D1 D2
[ 0.449240] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.449249] pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
[ 0.449281] pci 0000:01:05.1: supports D1 D2
[ 0.449343] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.449382] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.449385] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.449389] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.449479] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.449492] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.449513] pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.449527] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.449537] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.449584] pci 0000:02:00.0: supports D1 D2
[ 0.449586] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449614] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.458223] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.458275] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.458278] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.458282] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.458402] acpiphp: Slot [1] registered
[ 0.458477] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.458516] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.458519] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.458523] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.458629] pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
[ 0.458650] pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
[ 0.458744] pci 0000:06:00.0: supports D1 D2
[ 0.470248] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.470300] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.470395] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.470434] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.470441] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.470443] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.470445] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.470447] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.470449] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.470451] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.470453] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.470455] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.470457] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.470459] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.470461] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.470463] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.470465] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.470467] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.470469] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.526520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.527027] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.527533] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.528036] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.528524] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.528997] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.529471] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.529944] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.530605] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.530711] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.530774] Found 1 acpi root devices
[ 0.530822] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.530993] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.531034] vgaarb: loaded
[ 0.531069] vgaarb: bridge control possible 0000:01:05.0
[ 0.531149] PCI: Using ACPI for IRQ routing
[ 0.539086] PCI: pci_cache_line_size set to 64 bytes
[ 0.539229] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.539231] e820: reserve RAM buffer [mem 0xafcf0000-0xafffffff]
[ 0.539233] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.539357] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.539523] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.541606] Switched to clocksource hpet
[ 0.543453] pnp: PnP ACPI init
[ 0.543506] ACPI: bus type PNP registered
[ 0.545069] pnp 00:00: [dma 4]
[ 0.545124] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.545198] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.545226] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.545343] system 00:03: [io 0x0400-0x04cf] could not be reserved
[ 0.545421] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.545459] system 00:03: [io 0x04d6] has been reserved
[ 0.545497] system 00:03: [io 0x0680-0x06ff] has been reserved
[ 0.545536] system 00:03: [io 0x077a] has been reserved
[ 0.545574] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.545627] system 00:03: [io 0x0c14] has been reserved
[ 0.545667] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 0.545705] system 00:03: [io 0x0c6c] has been reserved
[ 0.545742] system 00:03: [io 0x0c6f] has been reserved
[ 0.545779] system 00:03: [io 0x0cd0-0x0cdb] has been reserved
[ 0.545818] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.545857] system 00:03: [io 0x0260-0x0273] has been reserved
[ 0.545895] system 00:03: [io 0x0800] has been reserved
[ 0.545932] system 00:03: [io 0x0804] has been reserved
[ 0.545971] system 00:03: [io 0x087f] has been reserved
[ 0.546009] system 00:03: [io 0x0cdc-0x0cdf] has been reserved
[ 0.546047] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.546084] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.546125] system 00:03: [io 0x0200-0x027f] could not be reserved
[ 0.546164] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.546252] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.546295] system 00:04: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.546333] system 00:04: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.546372] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.546411] system 00:04: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.546450] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.546488] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.546527] system 00:04: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.546565] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.546621] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.546718] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.546773] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.546803] pnp 00:08: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
[ 0.666080] pnp: PnP ACPI: found 9 devices
[ 0.666122] ACPI: bus type PNP unregistered
[ 0.673521] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.673593] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.673631] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.673670] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.673709] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.673758] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 0.673798] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.673836] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.673875] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.673913] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.673955] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.673992] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.674031] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.674069] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.674110] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.674148] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.674189] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 0.674226] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.674274] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.674276] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.674278] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.674280] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.674282] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.674284] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.674286] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.674288] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.674290] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.674292] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.674294] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.674295] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.674297] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.674299] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.674301] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.674304] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.674306] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 0.674308] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.674310] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.674312] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
[ 0.674314] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.674316] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.674318] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
[ 0.674320] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.674322] pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
[ 0.674324] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.674326] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.674328] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.674330] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.674332] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.674334] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.674336] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.674338] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.674339] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.674341] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.674343] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.674345] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.674347] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.674349] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.674351] pci_bus 0000:07: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.674353] pci_bus 0000:07: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.674419] NET: Registered protocol family 2
[ 0.674685] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.674912] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.675147] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.675235] TCP: reno registered
[ 0.675285] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675351] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675518] NET: Registered protocol family 1
[ 0.675568] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.786237] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.898330] pci 0000:01:05.0: Boot video device
[ 0.898385] Unpacking initramfs...
[ 1.199224] Freeing initrd memory: 13936K (ffff88007f264000 - ffff880080000000)
[ 1.200124] PCI-DMA: Disabling AGP.
[ 1.201517] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 1.201555] PCI-DMA: using GART IOMMU.
[ 1.201593] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.205268] LVT offset 1 assigned for vector 0x400
[ 1.205323] IBS: LVT offset 1 assigned
[ 1.205392] perf: AMD IBS detected (0x0000001f)
[ 1.205771] audit: initializing netlink socket (disabled)
[ 1.205820] type=2000 audit(1387998167.068:1): initialized
[ 1.219386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.220039] VFS: Disk quotas dquot_6.5.2
[ 1.220121] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.220259] msgmni has been set to 7414
[ 1.220704] alg: No test for stdrng (krng)
[ 1.220781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.220877] io scheduler noop registered
[ 1.220918] io scheduler deadline registered
[ 1.220973] io scheduler cfq registered (default)
[ 1.221236] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.221375] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.221510] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.221573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.221628] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.221726] GHES: HEST is not enabled!
[ 1.222345] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.222950] hpet_acpi_add: no address or irqs in _CRS
[ 1.222999] Linux agpgart interface v0.103
[ 1.223119] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.224815] i8042: Detected active multiplexing controller, rev 1.1
[ 1.225586] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.225627] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.225684] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.225737] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.225789] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.225972] mousedev: PS/2 mouse device common for all mice
[ 1.226048] rtc_cmos 00:05: RTC can wake from S4
[ 1.226247] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.226308] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.226353] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.226390] AMD IOMMUv2 functionality not available on this system
[ 1.226519] TCP: cubic registered
[ 1.226604] NET: Registered protocol family 10
[ 1.226827] mip6: Mobile IPv6
[ 1.226864] NET: Registered protocol family 17
[ 1.226902] mpls_gso: MPLS GSO support
[ 1.227262] registered taskstats version 1
[ 1.227978] rtc_cmos 00:05: setting system clock to 2013-12-25 19:02:47 UTC (1387998167)
[ 1.228063] PM: Hibernation image not present or could not be loaded.
[ 1.229009] Freeing unused kernel memory: 968K (ffffffff818ab000 - ffffffff8199d000)
[ 1.229088] Write protecting the kernel read-only data: 8192k
[ 1.233444] Freeing unused kernel memory: 1436K (ffff880001499000 - ffff880001600000)
[ 1.234972] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 1.250964] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.278313] systemd-udevd[61]: starting version 204
[ 1.299872] ACPI: bus type USB registered
[ 1.299975] usbcore: registered new interface driver usbfs
[ 1.300021] usbcore: registered new interface driver hub
[ 1.301628] SCSI subsystem initialized
[ 1.301821] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.301841] usbcore: registered new device driver usb
[ 1.301917] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.302355] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.302582] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000061e000, 1c:c1:de:b8:15:d4, XID 04e00000 IRQ 43
[ 1.302687] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.302909] ehci-pci: EHCI PCI platform driver
[ 1.303120] ehci-pci 0000:00:12.2: setting latency timer to 64
[ 1.303136] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.303182] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.303238] QUIRK: Enable AMD PLL fix
[ 1.303239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.303280] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.303333] ehci-pci 0000:00:12.2: debug port 1
[ 1.303414] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
[ 1.303477] ohci-pci: OHCI PCI platform driver
[ 1.310361] libata version 3.00 loaded.
[ 1.314264] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.314354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.314393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.314433] usb usb1: Product: EHCI Host Controller
[ 1.314469] usb usb1: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 1.314507] usb usb1: SerialNumber: 0000:00:12.2
[ 1.314686] hub 1-0:1.0: USB hub found
[ 1.314732] hub 1-0:1.0: 5 ports detected
[ 1.315110] ehci-pci 0000:00:13.2: setting latency timer to 64
[ 1.315118] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.315161] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.315206] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.315256] ehci-pci 0000:00:13.2: debug port 1
[ 1.315322] ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
[ 1.326266] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.326368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.326410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.326450] usb usb2: Product: EHCI Host Controller
[ 1.326487] usb usb2: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 1.326525] usb usb2: SerialNumber: 0000:00:13.2
[ 1.326697] hub 2-0:1.0: USB hub found
[ 1.326743] hub 2-0:1.0: 5 ports detected
[ 1.327251] ehci-pci 0000:00:16.2: setting latency timer to 64
[ 1.327260] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.327302] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.327346] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.327396] ehci-pci 0000:00:16.2: debug port 1
[ 1.327462] ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
[ 1.338325] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.338451] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.338494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.338534] usb usb3: Product: EHCI Host Controller
[ 1.338570] usb usb3: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 1.338607] usb usb3: SerialNumber: 0000:00:16.2
[ 1.338761] hub 3-0:1.0: USB hub found
[ 1.338807] hub 3-0:1.0: 4 ports detected
[ 1.339486] ohci-pci 0000:00:12.0: setting latency timer to 64
[ 1.339492] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.339538] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.339611] ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
[ 1.356996] ACPI: Fan [FAN0] (off)
[ 1.357123] ACPI: Fan [FAN1] (off)
[ 1.357202] ACPI: Fan [FAN2] (off)
[ 1.357279] ACPI: Fan [FAN3] (off)
[ 1.357351] ACPI: Fan [FAN4] (off)
[ 1.367719] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.367796] ACPI: Thermal Zone [CPUZ] (70 C)
[ 1.383965] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.384012] ACPI: Thermal Zone [TZ3] (20 C)
[ 1.398411] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.398459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.398500] usb usb4: Product: OHCI PCI host controller
[ 1.398538] usb usb4: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.398575] usb usb4: SerialNumber: 0000:00:12.0
[ 1.398734] hub 4-0:1.0: USB hub found
[ 1.398778] hub 4-0:1.0: 5 ports detected
[ 1.399128] ohci-pci 0000:00:13.0: setting latency timer to 64
[ 1.399132] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.399174] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.399231] ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
[ 1.458470] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.458513] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.458553] usb usb5: Product: OHCI PCI host controller
[ 1.458590] usb usb5: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.458627] usb usb5: SerialNumber: 0000:00:13.0
[ 1.458842] hub 5-0:1.0: USB hub found
[ 1.458887] hub 5-0:1.0: 5 ports detected
[ 1.459345] ohci-pci 0000:00:14.5: setting latency timer to 64
[ 1.459349] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.459390] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.459448] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
[ 1.518520] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.518562] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.518602] usb usb6: Product: OHCI PCI host controller
[ 1.518638] usb usb6: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.518675] usb usb6: SerialNumber: 0000:00:14.5
[ 1.518884] hub 6-0:1.0: USB hub found
[ 1.518929] hub 6-0:1.0: 2 ports detected
[ 1.519247] ohci-pci 0000:00:16.0: setting latency timer to 64
[ 1.519250] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.519292] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.519348] ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
[ 1.578585] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.578628] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.578667] usb usb7: Product: OHCI PCI host controller
[ 1.578704] usb usb7: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.578741] usb usb7: SerialNumber: 0000:00:16.0
[ 1.578978] hub 7-0:1.0: USB hub found
[ 1.579026] hub 7-0:1.0: 4 ports detected
[ 1.579206] ahci 0000:00:11.0: version 3.0
[ 1.579424] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.579467] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.583214] scsi0 : ahci
[ 1.583388] scsi1 : ahci
[ 1.583468] ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
[ 1.583515] ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
[ 1.630629] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.794846] usb 1-5: New USB device found, idVendor=0461, idProduct=4db6
[ 1.794852] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.794854] usb 1-5: Product: Villem
[ 1.794856] usb 1-5: Manufacturer: Primax Electronics Ltd.
[ 1.794858] usb 1-5: SerialNumber: PMX01
[ 2.074979] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.075009] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.076211] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[ 2.076216] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.077458] ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100
[ 2.077571] ata1.00: configured for UDMA/100
[ 2.077810] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5
[ 2.078189] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.078235] sd 0:0:0:0: [sda] Write Protect is off
[ 2.078238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.078300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.080215] ata2.00: configured for UDMA/100
[ 2.081508] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.082057] scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
[ 2.082453] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.086971] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.086976] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.087131] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.126066] sda: sda1 sda2 sda3 sda4
[ 2.126515] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.202998] tsc: Refined TSC clocksource calibration: 2194.505 MHz
[ 2.323177] usb 5-4: new full-speed USB device number 2 using ohci-pci
[ 2.498410] usb 5-4: New USB device found, idVendor=0a5c, idProduct=21b4
[ 2.498415] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.498417] usb 5-4: Product: Broadcom 2070 Bluetooth
[ 2.498419] usb 5-4: Manufacturer: Broadcom Corp
[ 2.498421] usb 5-4: SerialNumber: E02A820231BD
[ 2.604819] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 2.604826] PM: Marking nosave pages: [mem 0xafcf0000-0xafefefff]
[ 2.604840] PM: Marking nosave pages: [mem 0xaff00000-0xffffffff]
[ 2.606013] PM: Marking nosave pages: [mem 0xa4000000-0xa7ffffff]
[ 2.606276] PM: Basic memory bitmaps created
[ 2.622648] PM: Basic memory bitmaps freed
[ 2.676109] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.203939] Switched to clocksource tsc
[ 4.594867] systemd-udevd[355]: starting version 204
[ 5.359600] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 5.359663] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 5.359719] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 5.359790] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 5.372415] bcma: bus0: Bus registered
[ 5.734305] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.818349] Bluetooth: Core ver 2.16
[ 5.818443] NET: Registered protocol family 31
[ 5.818480] Bluetooth: HCI device and connection manager initialized
[ 5.818524] Bluetooth: HCI socket layer initialized
[ 5.818561] Bluetooth: L2CAP socket layer initialized
[ 5.818602] Bluetooth: SCO socket layer initialized
[ 5.975526] ACPI: processor limited to max C-state 1
[ 5.975866] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 5.975941] ACPI: Sleep Button [SLPB]
[ 5.976024] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 5.988620] ACPI: Lid Switch [LID]
[ 5.988721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.988770] ACPI: Power Button [PWRF]
[ 5.992700] acpi device:02: registered as cooling_device7
[ 5.993418] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 5.993532] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8
[ 5.994086] ACPI: AC Adapter [AC] (on-line)
[ 5.998671] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.031903] usbcore: registered new interface driver btusb
[ 6.086825] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.087851] wmi: Mapper loaded
[ 6.152828] EDAC MC: Ver: 3.0.0
[ 6.169936] MCE: In-kernel MCE decoding enabled.
[ 6.184221] AMD64 EDAC driver v3.4.0
[ 6.212115] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.229767] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.229859] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.230435] pci 0000:00:01.0: setting latency timer to 64
[ 6.230541] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 6.230565] EDAC amd64: DRAM ECC disabled.
[ 6.230612] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.230612] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.230612] (Note that use of the override may cause unknown side effects.)
[ 6.260981] media: Linux media interface: v0.10
[ 6.314779] Linux video capture interface: v2.00
[ 6.484011] uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
[ 6.492226] input: Villem as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input12
[ 6.492368] usbcore: registered new interface driver uvcvideo
[ 6.492413] USB Video Class driver (1.1.1)
[ 6.550548] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input13
[ 6.586217] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20130725/utaddress-251)
[ 6.586361] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.827022] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.827180] sp5100_tco: PCI Revision ID: 0x42
[ 6.827272] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.827329] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.827470] sp5100_tco: initialized (0xffffc9000060eb00). heartbeat=60 sec (nowayout=0)
[ 6.893940] microcode: CPU0: patch_level=0x010000c8
[ 6.905616] platform microcode: firmware: failed to load amd-ucode/microcode_amd.bin (-2)
[ 6.969305] [drm] Initialized drm 1.1.0 20060810
[ 7.266392] [drm] radeon kernel modesetting enabled.
[ 7.266857] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475).
[ 7.266918] [drm] register mmio base: 0xD4300000
[ 7.266955] [drm] register mmio size: 65536
[ 7.267630] ATOM BIOS: HP_Valima
[ 7.267685] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 7.267726] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 7.267768] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.267804] [drm] RAM width 32bits DDR
[ 7.267891] [TTM] Zone kernel: Available graphics memory: 1899476 kiB
[ 7.267929] [TTM] Initializing pool allocator
[ 7.267968] [TTM] Initializing DMA pool allocator
[ 7.268022] [drm] radeon: 256M of VRAM memory ready
[ 7.268058] [drm] radeon: 512M of GTT memory ready.
[ 7.268105] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.272380] [drm] Loading RS780 Microcode
[ 7.308935] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 7.342183] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.517386] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_pfp.bin
[ 7.522591] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/RS780_me.bin
[ 7.532894] radeon 0000:01:05.0: firmware: direct-loading firmware radeon/R600_rlc.bin
[ 7.535924] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 7.536069] radeon 0000:01:05.0: WB enabled
[ 7.536119] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800af4d3c00
[ 7.536174] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800af4d3c0c
[ 7.536227] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.536271] [drm] Driver supports precise vblank timestamp query.
[ 7.536340] [drm] radeon: irq initialized.
[ 7.536738] radeon 0000:01:05.0: setting latency timer to 64
[ 7.569004] [drm] ring test on 0 succeeded in 0 usecs
[ 7.569109] [drm] ring test on 3 succeeded in 1 usecs
[ 7.569353] [drm] Enabling audio 0 support
[ 7.569426] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.569488] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.570229] [drm] radeon atom DIG backlight initialized
[ 7.570276] [drm] Radeon Display Connectors
[ 7.570319] [drm] Connector 0:
[ 7.570361] [drm] VGA-1
[ 7.570405] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.570452] [drm] Encoders:
[ 7.570494] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.570537] [drm] Connector 1:
[ 7.570579] [drm] LVDS-1
[ 7.570622] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.570669] [drm] Encoders:
[ 7.570711] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 7.570754] [drm] Connector 2:
[ 7.570795] [drm] HDMI-A-1
[ 7.570837] [drm] HPD1
[ 7.570880] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 7.570927] [drm] Encoders:
[ 7.570968] [drm] DFP1: INTERNAL_UNIPHY
[ 7.571115] [drm] radeon: power management initialized
[ 7.580458] input: HP WMI hotkeys as /devices/virtual/input/input15
[ 7.639293] microcode: CPU1: patch_level=0x010000c8
[ 7.639474] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.920127] cfg80211: Calling CRDA to update world regulatory domain
[ 7.927409] kvm: Nested Virtualization enabled
[ 7.927453] kvm: Nested Paging enabled
[ 7.969761] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform
[ 8.003511] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 8.003579] b43: probe of bcma0:0 failed with error -524
[ 8.003660] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 8.049468] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 8.225370] bcma-pci-bridge 0000:06:00.0: no hotplug settings from platform
[ 8.237509] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.492840] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 646827
[ 8.562220] cfg80211: World regulatory domain updated:
[ 8.562339] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.562420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562500] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562579] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.562657] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562736] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.562835] cfg80211: Calling CRDA for country: US
[ 8.566352] [drm] fb mappable at 0xC0141000
[ 8.566404] [drm] vram apper at 0xC0000000
[ 8.566448] [drm] size 4325376
[ 8.566491] [drm] fb depth is 24
[ 8.566533] [drm] pitch is 5632
[ 8.566730] fbcon: radeondrmfb (fb0) is primary device
[ 8.575956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input19
[ 8.592084] cfg80211: Regulatory domain changed to country: US
[ 8.592086] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.592091] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.592094] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.592097] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.592099] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.592101] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.592104] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.592106] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 8.632724] Console: switching to colour frame buffer device 170x48
[ 8.646852] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 8.646972] radeon 0000:01:05.0: registered panic notifier
[ 8.647102] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
[ 9.636462] Adding 2312188k swap on /dev/sda2. Priority:-1 extents:1 across:2312188k
[ 9.689297] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.250577] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 11.457593] fuse init (API version 7.22)
[ 11.527992] loop: module loaded
[ 11.947653] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 11.958779] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 12.149667] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.029295] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx-0.fw
[ 13.044438] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw
[ 13.291870] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 13.295903] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 13.300682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.109675] wlan0: authenticate with 00:22:75:da:c1:a1
[ 14.116238] wlan0: send auth to 00:22:75:da:c1:a1 (try 1/3)
[ 14.122897] wlan0: authenticated
[ 14.128788] wlan0: associate with 00:22:75:da:c1:a1 (try 1/3)
[ 14.183611] wlan0: RX AssocResp from 00:22:75:da:c1:a1 (capab=0x431 status=0 aid=8)
[ 14.188821] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 14.193935] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 14.199054] wlan0: associated
[ 14.203220] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 14.207460] cfg80211: Calling CRDA for country: NL
[ 14.218392] cfg80211: Regulatory domain changed to country: NL
[ 14.222524] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.226694] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.230871] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.234976] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.239019] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 14.242994] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 18.967003] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 22.782025] lp: driver loaded but no devices found
[ 22.814793] ppdev: user-space parallel port driver
-- dmesg output for not working kernel:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.12.6-1 (2013-12-21)
[ 0.000000] Command line: auto BOOT_IMAGE=Linux ro root=803
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afceffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afcf0000-0x00000000afdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.03 08/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
[ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
[ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafceffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafbfffff] page 2M
[ 0.000000] [mem 0xafc00000-0xafceffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xafeff000-0xafefffff]
[ 0.000000] [mem 0xafeff000-0xafefffff] page 4k
[ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f264000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000f2aa0 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 00000000afefe038 00038 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HPQOEM 307E 00000003 HP 00000001)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000afede000 1B406 (v01 HPQOEM SB700 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000afe8f000 00040
[ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000afedb000 00038 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000afeda000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffa000-0x13fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xafceffff]
[ 0.000000] node 0: [mem 0xafeff000-0xafefffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 982159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9790 pages used for memmap
[ 0.000000] DMA32 zone: 716017 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafcf0000-0xafdcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafdcf000-0xafecefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafecf000-0xafefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85888 r8192 d20608 u524288
[ 0.000000] pcpu-alloc: s85888 r8192 d20608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 968708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=803
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
[ 0.000000] Memory: 3716184K/3928636K available (4697K kernel code, 679K rwdata, 1592K rodata, 968K init, 932K bss, 212452K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2194.422 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.84 BogoMIPS (lpj=8777688)
[ 0.000076] pid_max: default: 32768 minimum: 301
[ 0.000142] Security Framework initialized
[ 0.000182] AppArmor: AppArmor disabled by boot time parameter
[ 0.000218] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000525] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001912] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002569] Mount-cache hash table entries: 256
[ 0.002812] Initializing cgroup subsys memory
[ 0.002867] Initializing cgroup subsys devices
[ 0.002905] Initializing cgroup subsys freezer
[ 0.002942] Initializing cgroup subsys net_cls
[ 0.002979] Initializing cgroup subsys blkio
[ 0.003015] Initializing cgroup subsys perf_event
[ 0.003073] tseg: 00aff00000
[ 0.003077] CPU: Physical Processor ID: 0
[ 0.003113] CPU: Processor Core ID: 0
[ 0.003150] mce: CPU supports 6 MCE banks
[ 0.003190] LVT offset 0 assigned for vector 0xf9
[ 0.003229] process: using AMD E400 aware idle routine
[ 0.003267] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.003267] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.003267] tlb_flushall_shift: 4
[ 0.003392] Freeing SMP alternatives memory: 20K (ffffffff8199d000 - ffffffff819a2000)
[ 0.004220] ACPI: Core revision 20130725
[ 0.008881] ACPI: All ACPI Tables successfully acquired
[ 0.038576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078329] smpboot: CPU0: AMD Athlon(tm) II P340 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
[ 0.183927] Performance Events: AMD PMU driver.
[ 0.183998] ... version: 0
[ 0.184034] ... bit width: 48
[ 0.184070] ... generic registers: 4
[ 0.184105] ... value mask: 0000ffffffffffff
[ 0.184141] ... max period: 00007fffffffffff
[ 0.184177] ... fixed-purpose events: 0
[ 0.184213] ... event mask: 000000000000000f
[ 0.184464] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184638] smpboot: Booting Node 0, Processors # 1 OK
[ 0.197809] Brought up 2 CPUs
[ 0.197859] smpboot: Total of 2 processors activated (8777.68 BogoMIPS)
[ 0.197887] process: System has AMD C1E enabled
[ 0.197899] process: Switch to broadcast mode on CPU1
[ 0.198458] process: Switch to broadcast mode on CPU0
[ 0.202093] devtmpfs: initialized
[ 0.206304] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[ 0.206563] NET: Registered protocol family 16
[ 0.206706] cpuidle: using governor ladder
[ 0.206747] cpuidle: using governor menu
[ 0.206786] node 0 link 0: io port [0, ffffff]
[ 0.206789] TOM: 00000000c0000000 aka 3072M
[ 0.206826] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.206828] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.206831] node 0 link 0: mmio [d0000000, d41fffff]
[ 0.206833] node 0 link 0: mmio [d4200000, d43fffff]
[ 0.206835] node 0 link 0: mmio [d4400000, dfffffff]
[ 0.206836] node 0 link 0: mmio [e0000000, e0ffffff] ==> none
[ 0.206838] node 0 link 0: mmio [e1000000, ffb7ffff] ==> [f0000000, ffb7ffff]
[ 0.206841] TOM2: 0000000140000000 aka 5120M
[ 0.206878] bus: [bus 00-1f] on node 0 link 0
[ 0.206879] bus: 00 [io 0x0000-0xffff]
[ 0.206881] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.206882] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.206883] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.206920] ACPI: bus type PCI registered
[ 0.206957] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.207064] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.207105] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.219398] PCI: Using configuration type 1 for base access
[ 0.219629] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.219669] mtrr: probably your BIOS does not setup all CPUs.
[ 0.219706] mtrr: corrected configuration.
[ 0.220327] bio: create slab <bio-0> at 0
[ 0.220496] ACPI: Added _OSI(Module Device)
[ 0.221071] ACPI: Added _OSI(Processor Device)
[ 0.221107] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.221143] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.222231] ACPI: EC: Look up EC in DSDT
[ 0.262106] ACPI Error: No handler for Region [ECRM] (ffff88013b2902b8) [EmbeddedControl] (20130725/evregion-162)
[ 0.262218] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
[ 0.262322] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b285bc8), AE_NOT_EXIST (20130725/psparse-536)
[ 0.262494] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b285bc8), AE_NOT_EXIST (20130725/uteval-103)
[ 0.290157] ACPI: Interpreter enabled
[ 0.290212] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.290319] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.290437] ACPI: (supports S0 S3 S4 S5)
[ 0.290474] ACPI: Using IOAPIC for interrupt routing
[ 0.290709] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290918] ACPI: No dock devices found.
[ 0.299675] ACPI: Power Resource [APPR] (off)
[ 0.443835] ACPI: Power Resource [PFN0] (off)
[ 0.443918] ACPI: Power Resource [PFN1] (off)
[ 0.443998] ACPI: Power Resource [PFN2] (off)
[ 0.444076] ACPI: Power Resource [PFN3] (off)
[ 0.444151] ACPI: Power Resource [PFN4] (off)
[ 0.444848] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.444925] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.444965] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.445161] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored
[ 0.445209] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.445253] acpi PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.445469] ACPI: \_SB_.PCI0.ACEL: can't evaluate _ADR (0x5)
[ 0.445506] PCI host bridge to bus 0000:00
[ 0.445544] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.445582] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.445619] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.445657] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.445694] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.445732] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.445769] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.445807] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.445845] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.445882] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.445920] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.445958] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.445995] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.446033] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.446071] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.446122] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.446170] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.446272] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[ 0.446363] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.446398] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.446439] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.446515] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.446550] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.446589] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.446663] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.446703] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.446744] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.446828] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.446847] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
[ 0.446856] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
[ 0.446865] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
[ 0.446875] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
[ 0.446884] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
[ 0.446893] pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
[ 0.447001] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.447015] pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
[ 0.447114] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.447189] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.447208] pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
[ 0.447286] pci 0000:00:12.2: supports D1 D2
[ 0.447288] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.447329] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.447403] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.447416] pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
[ 0.447514] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.447591] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.447610] pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
[ 0.447688] pci 0000:00:13.2: supports D1 D2
[ 0.447690] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.447730] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.447804] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.447929] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.447950] pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.448013] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.448051] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.448119] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.448244] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.448335] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.448349] pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
[ 0.448466] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.448480] pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
[ 0.448604] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.448623] pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
[ 0.448701] pci 0000:00:16.2: supports D1 D2
[ 0.448703] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.448779] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.448841] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.448900] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.448958] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.449018] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.449168] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.449177] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.449182] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
[ 0.449187] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
[ 0.449197] pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
[ 0.449216] pci 0000:01:05.0: supports D1 D2
[ 0.449252] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.449260] pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
[ 0.449292] pci 0000:01:05.1: supports D1 D2
[ 0.449354] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.449393] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.449396] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.449400] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.449489] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.449502] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.449523] pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.449536] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.449546] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.449593] pci 0000:02:00.0: supports D1 D2
[ 0.449595] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449622] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.470232] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.470283] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.470286] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.470290] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.470408] acpiphp: Slot [1] registered
[ 0.470483] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.470522] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.470525] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.470529] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.470637] pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
[ 0.470657] pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
[ 0.470749] pci 0000:06:00.0: supports D1 D2
[ 0.482257] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.482308] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.482407] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.482447] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.482453] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.482456] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.482458] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.482460] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.482462] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.482464] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.482466] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.482468] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.482470] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.482472] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.482474] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.482476] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.482478] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.482480] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.482482] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.538520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.539026] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.539529] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.540030] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.540514] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.540986] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.541457] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.541927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.542588] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.542694] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.542756] Found 1 acpi root devices
[ 0.542803] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.542976] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.543017] vgaarb: loaded
[ 0.543052] vgaarb: bridge control possible 0000:01:05.0
[ 0.543133] PCI: Using ACPI for IRQ routing
[ 0.551087] PCI: pci_cache_line_size set to 64 bytes
[ 0.551230] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.551232] e820: reserve RAM buffer [mem 0xafcf0000-0xafffffff]
[ 0.551234] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.551353] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.551519] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.553603] Switched to clocksource hpet
[ 0.555479] pnp: PnP ACPI init
[ 0.555534] ACPI: bus type PNP registered
[ 0.557745] pnp 00:00: [dma 4]
[ 0.557792] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.557835] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.557863] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.557976] system 00:03: [io 0x0400-0x04cf] could not be reserved
[ 0.558052] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.558090] system 00:03: [io 0x04d6] has been reserved
[ 0.558127] system 00:03: [io 0x0680-0x06ff] has been reserved
[ 0.558165] system 00:03: [io 0x077a] has been reserved
[ 0.558202] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.558240] system 00:03: [io 0x0c14] has been reserved
[ 0.558277] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 0.558314] system 00:03: [io 0x0c6c] has been reserved
[ 0.558352] system 00:03: [io 0x0c6f] has been reserved
[ 0.558389] system 00:03: [io 0x0cd0-0x0cdb] has been reserved
[ 0.558427] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.558464] system 00:03: [io 0x0260-0x0273] has been reserved
[ 0.558501] system 00:03: [io 0x0800] has been reserved
[ 0.558539] system 00:03: [io 0x0804] has been reserved
[ 0.558576] system 00:03: [io 0x087f] has been reserved
[ 0.558614] system 00:03: [io 0x0cdc-0x0cdf] has been reserved
[ 0.558651] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.558688] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.558726] system 00:03: [io 0x0200-0x027f] could not be reserved
[ 0.558764] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.558848] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.558892] system 00:04: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.558930] system 00:04: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.558968] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.559005] system 00:04: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.559043] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.559081] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.559119] system 00:04: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.559157] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.559211] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.559308] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.559362] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.559394] pnp 00:08: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
[ 0.682085] pnp: PnP ACPI: found 9 devices
[ 0.682128] ACPI: bus type PNP unregistered
[ 0.689503] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.689575] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.689613] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.689652] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.689691] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.689741] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 0.689781] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.689818] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.689857] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.689895] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.689936] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.689974] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.690012] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.690050] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.690092] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.690130] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.690170] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 0.690207] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.690255] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.690257] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.690259] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.690261] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.690263] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.690265] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.690267] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.690268] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.690270] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.690272] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.690274] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.690276] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.690278] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.690280] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.690282] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.690284] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.690286] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 0.690288] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.690290] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.690292] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
[ 0.690294] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.690296] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.690298] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
[ 0.690300] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.690303] pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
[ 0.690305] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.690307] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.690309] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.690311] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.690313] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.690314] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.690316] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.690318] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.690320] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.690322] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.690324] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.690326] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.690328] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.690330] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.690332] pci_bus 0000:07: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.690334] pci_bus 0000:07: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.690401] NET: Registered protocol family 2
[ 0.690664] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.690890] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.691123] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.691211] TCP: reno registered
[ 0.691261] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.691328] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.691498] NET: Registered protocol family 1
[ 0.691548] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.802238] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.914331] pci 0000:01:05.0: Boot video device
[ 0.914385] Unpacking initramfs...
[ 1.215299] Freeing initrd memory: 13936K (ffff88007f264000 - ffff880080000000)
[ 1.216180] PCI-DMA: Disabling AGP.
[ 1.217541] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 1.217578] PCI-DMA: using GART IOMMU.
[ 1.217617] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.221309] LVT offset 1 assigned for vector 0x400
[ 1.221363] IBS: LVT offset 1 assigned
[ 1.221433] perf: AMD IBS detected (0x0000001f)
[ 1.221811] audit: initializing netlink socket (disabled)
[ 1.221861] type=2000 audit(1387997597.084:1): initialized
[ 1.235547] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.236279] VFS: Disk quotas dquot_6.5.2
[ 1.236364] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.236505] msgmni has been set to 7414
[ 1.236951] alg: No test for stdrng (krng)
[ 1.237031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.237125] io scheduler noop registered
[ 1.237164] io scheduler deadline registered
[ 1.237219] io scheduler cfq registered (default)
[ 1.237481] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.237622] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.237755] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.237819] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.237874] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.237972] GHES: HEST is not enabled!
[ 1.238100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.239274] hpet_acpi_add: no address or irqs in _CRS
[ 1.239322] Linux agpgart interface v0.103
[ 1.239443] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.241140] i8042: Detected active multiplexing controller, rev 1.1
[ 1.241912] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.241953] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.242010] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.242064] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.242115] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.242301] mousedev: PS/2 mouse device common for all mice
[ 1.242379] rtc_cmos 00:05: RTC can wake from S4
[ 1.242564] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.242624] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.242670] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.242707] AMD IOMMUv2 functionality not available on this system
[ 1.242836] TCP: cubic registered
[ 1.242935] NET: Registered protocol family 10
[ 1.243157] mip6: Mobile IPv6
[ 1.243194] NET: Registered protocol family 17
[ 1.243232] mpls_gso: MPLS GSO support
[ 1.243600] registered taskstats version 1
[ 1.244332] rtc_cmos 00:05: setting system clock to 2013-12-25 18:53:18 UTC (1387997598)
[ 1.244418] PM: Hibernation image not present or could not be loaded.
[ 1.245352] Freeing unused kernel memory: 968K (ffffffff818ab000 - ffffffff8199d000)
[ 1.245431] Write protecting the kernel read-only data: 8192k
[ 1.249823] Freeing unused kernel memory: 1436K (ffff880001499000 - ffff880001600000)
[ 1.251310] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 1.266866] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.295021] systemd-udevd[60]: starting version 204
[ 1.314236] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.314293] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.314635] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.314836] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000061e000, 1c:c1:de:b8:15:d4, XID 04e00000 IRQ 43
[ 1.316545] ACPI: bus type USB registered
[ 1.316648] usbcore: registered new interface driver usbfs
[ 1.316694] usbcore: registered new interface driver hub
[ 1.321484] usbcore: registered new device driver usb
[ 1.321999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.322532] ehci-pci: EHCI PCI platform driver
[ 1.322573] SCSI subsystem initialized
[ 1.322825] ehci-pci 0000:00:12.2: setting latency timer to 64
[ 1.322841] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.322887] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.322934] QUIRK: Enable AMD PLL fix
[ 1.322938] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.322983] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.322992] ehci-pci 0000:00:12.2: debug port 1
[ 1.323040] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
[ 1.323247] ohci-pci: OHCI PCI platform driver
[ 1.324585] libata version 3.00 loaded.
[ 1.334312] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.334396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.334435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.334476] usb usb1: Product: EHCI Host Controller
[ 1.334513] usb usb1: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 1.334551] usb usb1: SerialNumber: 0000:00:12.2
[ 1.334749] hub 1-0:1.0: USB hub found
[ 1.334797] hub 1-0:1.0: 5 ports detected
[ 1.335206] ehci-pci 0000:00:13.2: setting latency timer to 64
[ 1.335214] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.335258] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.335301] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.335352] ehci-pci 0000:00:13.2: debug port 1
[ 1.335420] ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
[ 1.346422] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.346508] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.346547] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.346588] usb usb2: Product: EHCI Host Controller
[ 1.346625] usb usb2: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 1.346663] usb usb2: SerialNumber: 0000:00:13.2
[ 1.346952] hub 2-0:1.0: USB hub found
[ 1.347059] hub 2-0:1.0: 5 ports detected
[ 1.347913] ehci-pci 0000:00:16.2: setting latency timer to 64
[ 1.347923] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.347969] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.348012] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.348062] ehci-pci 0000:00:16.2: debug port 1
[ 1.348129] ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
[ 1.358289] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.358376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.358422] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.358462] usb usb3: Product: EHCI Host Controller
[ 1.358499] usb usb3: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 1.358537] usb usb3: SerialNumber: 0000:00:16.2
[ 1.358772] hub 3-0:1.0: USB hub found
[ 1.358878] hub 3-0:1.0: 4 ports detected
[ 1.359417] ohci-pci 0000:00:12.0: setting latency timer to 64
[ 1.359422] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.359468] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.359536] ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
[ 1.370108] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.370186] ACPI: Thermal Zone [CPUZ] (61 C)
[ 1.392501] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.392547] ACPI: Thermal Zone [TZ3] (20 C)
[ 1.392860] ACPI: Fan [FAN0] (off)
[ 1.392982] ACPI: Fan [FAN1] (off)
[ 1.393064] ACPI: Fan [FAN2] (off)
[ 1.393143] ACPI: Fan [FAN3] (off)
[ 1.393215] ACPI: Fan [FAN4] (off)
[ 1.418922] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.418972] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.419013] usb usb4: Product: OHCI PCI host controller
[ 1.419051] usb usb4: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.419088] usb usb4: SerialNumber: 0000:00:12.0
[ 1.419792] hub 4-0:1.0: USB hub found
[ 1.420255] hub 4-0:1.0: 5 ports detected
[ 1.421830] ohci-pci 0000:00:13.0: setting latency timer to 64
[ 1.421836] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.422433] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.422841] ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
[ 1.482489] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.482533] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482574] usb usb5: Product: OHCI PCI host controller
[ 1.482611] usb usb5: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.482648] usb usb5: SerialNumber: 0000:00:13.0
[ 1.482862] hub 5-0:1.0: USB hub found
[ 1.482908] hub 5-0:1.0: 5 ports detected
[ 1.483365] ohci-pci 0000:00:14.5: setting latency timer to 64
[ 1.483368] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.483410] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.483466] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
[ 1.542526] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.542569] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.542608] usb usb6: Product: OHCI PCI host controller
[ 1.542645] usb usb6: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.542682] usb usb6: SerialNumber: 0000:00:14.5
[ 1.542892] hub 6-0:1.0: USB hub found
[ 1.542937] hub 6-0:1.0: 2 ports detected
[ 1.543266] ohci-pci 0000:00:16.0: setting latency timer to 64
[ 1.543269] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.543311] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.543368] ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
[ 1.602568] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.602611] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.602650] usb usb7: Product: OHCI PCI host controller
[ 1.602687] usb usb7: Manufacturer: Linux 3.12-1-amd64 ohci_hcd
[ 1.602724] usb usb7: SerialNumber: 0000:00:16.0
[ 1.602928] hub 7-0:1.0: USB hub found
[ 1.602973] hub 7-0:1.0: 4 ports detected
[ 1.603148] ahci 0000:00:11.0: version 3.0
[ 1.603728] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.603776] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.604665] scsi0 : ahci
[ 1.604881] scsi1 : ahci
[ 1.604960] ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
[ 1.605002] ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
[ 1.646625] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.810803] usb 1-5: New USB device found, idVendor=0461, idProduct=4db6
[ 1.810808] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.810811] usb 1-5: Product: Villem
[ 1.810813] usb 1-5: Manufacturer: Primax Electronics Ltd.
[ 1.810814] usb 1-5: SerialNumber: PMX01
[ 2.094978] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.095012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.096243] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[ 2.096248] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.097426] ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100
[ 2.097603] ata1.00: configured for UDMA/100
[ 2.097848] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5
[ 2.098123] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.098166] sd 0:0:0:0: [sda] Write Protect is off
[ 2.098169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.098189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.100125] ata2.00: configured for UDMA/100
[ 2.101485] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.101785] scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
[ 2.102248] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.107017] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.107022] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.107158] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.150502] sda: sda1 sda2 sda3 sda4
[ 2.151385] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.219059] tsc: Refined TSC clocksource calibration: 2194.504 MHz
[ 2.339185] usb 5-4: new full-speed USB device number 2 using ohci-pci
[ 2.514410] usb 5-4: New USB device found, idVendor=0a5c, idProduct=21b4
[ 2.514415] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.514418] usb 5-4: Product: Broadcom 2070 Bluetooth
[ 2.514420] usb 5-4: Manufacturer: Broadcom Corp
[ 2.514421] usb 5-4: SerialNumber: E02A820231BD
[ 2.630751] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 2.630757] PM: Marking nosave pages: [mem 0xafcf0000-0xafefefff]
[ 2.630771] PM: Marking nosave pages: [mem 0xaff00000-0xffffffff]
[ 2.631916] PM: Marking nosave pages: [mem 0xa4000000-0xa7ffffff]
[ 2.632179] PM: Basic memory bitmaps created
[ 2.655924] PM: Basic memory bitmaps freed
[ 2.733426] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.736578] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.737225] usbcore: registered new interface driver usbhid
[ 2.737266] usbhid: USB HID core driver
[ 3.219960] Switched to clocksource tsc
[ 361.265869] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Reply to: