Bug#732223: linux-image-3.11-2-amd64 version 3.11.10-1 randomly boots. Stops at initramfs.
Package: src:linux
Version: 3.11.10-1
Severity: important
Dear Maintainer,
While booting linux-image-3.11-2-amd64 it usually gets up to initramfs and then stops. I can mount
filesystems and managed to add stable repo and install 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux.
You will find (not) working dmesg outputs, cat /proc/cpuinfo and /etc/lilo.conf enclosed.
Searching around, I have tried append="nohz=off", append="notsc" in lilo.conf but did not succeed.
Please, let me know if you need further information. I would be glad to help finding a solution.
Thank you,
Ricardo Peliquero
Argentina
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Hewlett-Packard
product_name: HP 425
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68DVA Ver. F.03
board_vendor: Hewlett-Packard
board_name: 1475
board_version: KBC Version 72.0E
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge [1022:9601]
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4200000-d43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d3200000-d41fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2200000-d31fffff
Prefetchable memory behind bridge: 00000000d1100000-00000000d20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: d2100000-d21fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 6018 [size=8]
Region 1: I/O ports at 6024 [size=4]
Region 2: I/O ports at 6010 [size=8]
Region 3: I/O ports at 6020 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at d440b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d440a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4409000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] [1002:9712] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4310000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1475]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at d0010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d0020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
06:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1483]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0461:4db6 Primax Electronics, Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-2-amd64 recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-97
Versions of packages linux-image-3.11-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii lilo 1:24.0-2
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.40
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false
-- Not working dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
[ 0.000000] Command line: auto BOOT_IMAGE=Linux ro root=803
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afceffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afcf0000-0x00000000afdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.03 08/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a87000, 0x01a87fff] PGTABLE
[ 0.000000] BRK [0x01a88000, 0x01a88fff] PGTABLE
[ 0.000000] BRK [0x01a89000, 0x01a89fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafceffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafbfffff] page 2M
[ 0.000000] [mem 0xafc00000-0xafceffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xafeff000-0xafefffff]
[ 0.000000] [mem 0xafeff000-0xafefffff] page 4k
[ 0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f37d000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000f2aa0 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 00000000afefe038 00038 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HPQOEM 307E 00000003 HP 00000001)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000afede000 1B406 (v01 HPQOEM SB700 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000afe8f000 00040
[ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000afedb000 00038 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000afeda000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffa000-0x13fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xafceffff]
[ 0.000000] node 0: [mem 0xafeff000-0xafefffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 982159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9790 pages used for memmap
[ 0.000000] DMA32 zone: 716017 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafcf0000-0xafdcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafdcf000-0xafecefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafecf000-0xafefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85952 r8192 d20544 u524288
[ 0.000000] pcpu-alloc: s85952 r8192 d20544 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 968708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=803
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
[ 0.000000] Memory: 3717332K/3928636K available (4607K kernel code, 659K rwdata, 1576K rodata, 968K init, 928K bss, 211304K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2194.311 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.62 BogoMIPS (lpj=8777244)
[ 0.000076] pid_max: default: 32768 minimum: 301
[ 0.000143] Security Framework initialized
[ 0.000182] AppArmor: AppArmor disabled by boot time parameter
[ 0.000219] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000501] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001868] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002545] Mount-cache hash table entries: 256
[ 0.002783] Initializing cgroup subsys memory
[ 0.002838] Initializing cgroup subsys devices
[ 0.002875] Initializing cgroup subsys freezer
[ 0.002911] Initializing cgroup subsys net_cls
[ 0.002949] Initializing cgroup subsys blkio
[ 0.002985] Initializing cgroup subsys perf_event
[ 0.003041] tseg: 00aff00000
[ 0.003045] CPU: Physical Processor ID: 0
[ 0.003081] CPU: Processor Core ID: 0
[ 0.003117] mce: CPU supports 6 MCE banks
[ 0.003158] LVT offset 0 assigned for vector 0xf9
[ 0.003197] process: using AMD E400 aware idle routine
[ 0.003235] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.003235] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.003235] tlb_flushall_shift: 4
[ 0.003359] Freeing SMP alternatives memory: 20K (ffffffff81998000 - ffffffff8199d000)
[ 0.004194] ACPI: Core revision 20130517
[ 0.008783] ACPI: All ACPI Tables successfully acquired
[ 0.038478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078229] smpboot: CPU0: AMD Athlon(tm) II P340 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
[ 0.183928] Performance Events: AMD PMU driver.
[ 0.183999] ... version: 0
[ 0.184035] ... bit width: 48
[ 0.184071] ... generic registers: 4
[ 0.184107] ... value mask: 0000ffffffffffff
[ 0.184143] ... max period: 00007fffffffffff
[ 0.184179] ... fixed-purpose events: 0
[ 0.184214] ... event mask: 000000000000000f
[ 0.184468] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184643] smpboot: Booting Node 0, Processors #1
[ 0.197812] Brought up 2 CPUs
[ 0.197896] smpboot: Total of 2 processors activated (8777.24 BogoMIPS)
[ 0.197898] process: System has AMD C1E enabled
[ 0.197910] process: Switch to broadcast mode on CPU1
[ 0.198529] process: Switch to broadcast mode on CPU0
[ 0.202102] devtmpfs: initialized
[ 0.203941] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[ 0.204193] NET: Registered protocol family 16
[ 0.204332] node 0 link 0: io port [0, ffffff]
[ 0.204335] TOM: 00000000c0000000 aka 3072M
[ 0.204376] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.204379] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.204381] node 0 link 0: mmio [d0000000, d41fffff]
[ 0.204383] node 0 link 0: mmio [d4200000, d43fffff]
[ 0.204385] node 0 link 0: mmio [d4400000, dfffffff]
[ 0.204387] node 0 link 0: mmio [e0000000, e0ffffff] ==> none
[ 0.204389] node 0 link 0: mmio [e1000000, ffb7ffff] ==> [f0000000, ffb7ffff]
[ 0.204391] TOM2: 0000000140000000 aka 5120M
[ 0.204428] bus: [bus 00-1f] on node 0 link 0
[ 0.204430] bus: 00 [io 0x0000-0xffff]
[ 0.204431] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.204432] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.204434] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.204455] ACPI: bus type PCI registered
[ 0.204492] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.204601] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204642] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.216935] PCI: Using configuration type 1 for base access
[ 0.217176] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.217247] mtrr: probably your BIOS does not setup all CPUs.
[ 0.217283] mtrr: corrected configuration.
[ 0.217928] bio: create slab <bio-0> at 0
[ 0.218106] ACPI: Added _OSI(Module Device)
[ 0.218144] ACPI: Added _OSI(Processor Device)
[ 0.218181] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.218755] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.219930] ACPI: EC: Look up EC in DSDT
[ 0.262116] ACPI Error: No handler for Region [ECRM] (ffff88013b2902b8) [EmbeddedControl] (20130517/evregion-162)
[ 0.262228] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130517/exfldio-305)
[ 0.262333] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b287bc8), AE_NOT_EXIST (20130517/psparse-536)
[ 0.262504] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b287bc8), AE_NOT_EXIST (20130517/uteval-103)
[ 0.289830] ACPI: Interpreter enabled
[ 0.289885] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.290008] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.290126] ACPI: (supports S0 S3 S4 S5)
[ 0.290163] ACPI: Using IOAPIC for interrupt routing
[ 0.290396] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290564] ACPI: No dock devices found.
[ 0.299294] ACPI: Power Resource [APPR] (off)
[ 0.439838] ACPI: Power Resource [PFN0] (off)
[ 0.439920] ACPI: Power Resource [PFN1] (off)
[ 0.439999] ACPI: Power Resource [PFN2] (off)
[ 0.440075] ACPI: Power Resource [PFN3] (off)
[ 0.440149] ACPI: Power Resource [PFN4] (off)
[ 0.440837] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.440914] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.440954] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.441139] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored
[ 0.441188] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.441231] acpi PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.441377] PCI host bridge to bus 0000:00
[ 0.441419] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.441457] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.441494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.441532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.441569] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.441607] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.441645] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.441682] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.441720] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.441758] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.441795] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.441833] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.441871] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.441909] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.441946] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.441984] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.442032] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.442151] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[ 0.442240] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.442276] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.442316] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.442393] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.442427] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.442466] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.442542] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.442582] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.442621] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.442707] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.442726] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
[ 0.442736] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
[ 0.442745] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
[ 0.442754] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
[ 0.442763] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
[ 0.442773] pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
[ 0.442882] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.442895] pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
[ 0.442993] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.443070] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.443088] pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
[ 0.443167] pci 0000:00:12.2: supports D1 D2
[ 0.443169] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.443208] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.443285] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.443298] pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
[ 0.443395] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.443471] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.443490] pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
[ 0.443568] pci 0000:00:13.2: supports D1 D2
[ 0.443570] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.443610] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.443685] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.443812] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.443832] pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.443894] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.443933] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.444004] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.444130] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.444220] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.444233] pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
[ 0.444351] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.444364] pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
[ 0.444489] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.444507] pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
[ 0.444585] pci 0000:00:16.2: supports D1 D2
[ 0.444587] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.444664] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.444729] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.444788] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.444848] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.444910] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.445054] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.445063] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.445068] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
[ 0.445073] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
[ 0.445083] pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
[ 0.445102] pci 0000:01:05.0: supports D1 D2
[ 0.445140] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.445148] pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
[ 0.445180] pci 0000:01:05.1: supports D1 D2
[ 0.445243] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.445283] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.445285] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.445289] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.445375] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.445388] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.445409] pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.445423] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.445432] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.445480] pci 0000:02:00.0: supports D1 D2
[ 0.445482] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.445509] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.466239] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.466285] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.466289] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.466293] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.466419] acpiphp: Slot [1] registered
[ 0.466474] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.466513] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.466516] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.466519] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.466621] pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
[ 0.466641] pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
[ 0.466733] pci 0000:06:00.0: supports D1 D2
[ 0.478264] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.478315] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.478410] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.478450] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.478457] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.478459] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.478461] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.478463] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.478466] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.478468] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.478470] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.478472] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.478474] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.478476] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.478478] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.478480] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.478482] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.478484] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.478486] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.534535] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.535039] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.535541] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.536041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.536527] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.536997] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.537467] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.537936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.538559] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.538666] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.538727] Found 1 acpi root devices
[ 0.538774] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.538945] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.538986] vgaarb: loaded
[ 0.539022] vgaarb: bridge control possible 0000:01:05.0
[ 0.539103] PCI: Using ACPI for IRQ routing
[ 0.547038] PCI: pci_cache_line_size set to 64 bytes
[ 0.547181] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.547183] e820: reserve RAM buffer [mem 0xafcf0000-0xafffffff]
[ 0.547185] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.547307] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.547473] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.549560] Switched to clocksource hpet
[ 0.551600] pnp: PnP ACPI init
[ 0.551663] ACPI: bus type PNP registered
[ 0.553265] pnp 00:00: [dma 4]
[ 0.553318] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.553359] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.553387] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.553502] system 00:03: [io 0x0400-0x04cf] could not be reserved
[ 0.553546] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.553602] system 00:03: [io 0x04d6] has been reserved
[ 0.553639] system 00:03: [io 0x0680-0x06ff] has been reserved
[ 0.553677] system 00:03: [io 0x077a] has been reserved
[ 0.553714] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.553751] system 00:03: [io 0x0c14] has been reserved
[ 0.553788] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 0.553826] system 00:03: [io 0x0c6c] has been reserved
[ 0.553863] system 00:03: [io 0x0c6f] has been reserved
[ 0.553900] system 00:03: [io 0x0cd0-0x0cdb] has been reserved
[ 0.553939] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.553976] system 00:03: [io 0x0260-0x0273] has been reserved
[ 0.554013] system 00:03: [io 0x0800] has been reserved
[ 0.554051] system 00:03: [io 0x0804] has been reserved
[ 0.554088] system 00:03: [io 0x087f] has been reserved
[ 0.554125] system 00:03: [io 0x0cdc-0x0cdf] has been reserved
[ 0.554163] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.554200] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.554238] system 00:03: [io 0x0200-0x027f] could not be reserved
[ 0.554277] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.554361] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.554404] system 00:04: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.554443] system 00:04: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.554480] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.554518] system 00:04: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.554556] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.554594] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.554633] system 00:04: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.554672] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.554728] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.554822] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.554877] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.554908] pnp 00:08: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
[ 0.682039] pnp: PnP ACPI: found 9 devices
[ 0.682082] ACPI: bus type PNP unregistered
[ 0.689607] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.689692] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.689731] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.689770] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.689808] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.689853] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 0.689893] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.689931] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.689970] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.690008] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.690049] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.690087] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.690125] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.690164] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.690205] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.690244] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.690284] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 0.690322] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.690373] pci 0000:00:01.0: setting latency timer to 64
[ 0.690691] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.690693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.690696] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.690698] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.690700] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.690702] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.690704] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.690706] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.690708] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.690709] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.690711] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.690713] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.690715] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.690717] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.690719] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.690722] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.690724] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 0.690726] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.690728] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.690730] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
[ 0.690732] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.690734] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.690736] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
[ 0.690739] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.690741] pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
[ 0.690743] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.690745] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.690747] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.690749] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.690751] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.690753] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.690755] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.690757] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.690759] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.690761] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.690763] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.690765] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.690767] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.690769] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.690771] pci_bus 0000:07: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.690773] pci_bus 0000:07: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.690840] NET: Registered protocol family 2
[ 0.691100] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.691319] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.691553] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.691643] TCP: reno registered
[ 0.691693] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.691761] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.691928] NET: Registered protocol family 1
[ 0.691978] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.802194] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.914289] pci 0000:01:05.0: Boot video device
[ 0.914344] Unpacking initramfs...
[ 1.193340] Freeing initrd memory: 12812K (ffff88007f37d000 - ffff880080000000)
[ 1.194274] PCI-DMA: Disabling AGP.
[ 1.195630] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 1.195668] PCI-DMA: using GART IOMMU.
[ 1.195705] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.199278] LVT offset 1 assigned for vector 0x400
[ 1.199333] IBS: LVT offset 1 assigned
[ 1.199401] perf: AMD IBS detected (0x0000001f)
[ 1.199765] audit: initializing netlink socket (disabled)
[ 1.199816] type=2000 audit(1386573538.064:1): initialized
[ 1.212883] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.213528] VFS: Disk quotas dquot_6.5.2
[ 1.213615] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.213766] msgmni has been set to 7414
[ 1.214204] alg: No test for stdrng (krng)
[ 1.214291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.214389] io scheduler noop registered
[ 1.214430] io scheduler deadline registered
[ 1.214484] io scheduler cfq registered (default)
[ 1.214622] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.214677] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.214726] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.214789] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.214876] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.215007] GHES: HEST is not enabled!
[ 1.215135] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.215768] hpet_acpi_add: no address or irqs in _CRS
[ 1.215816] Linux agpgart interface v0.103
[ 1.215932] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.218196] i8042: Detected active multiplexing controller, rev 1.1
[ 1.218975] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.219015] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.219075] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.219128] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.219181] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.219363] mousedev: PS/2 mouse device common for all mice
[ 1.219441] rtc_cmos 00:05: RTC can wake from S4
[ 1.219623] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.219684] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.219727] cpuidle: using governor ladder
[ 1.219763] cpuidle: using governor menu
[ 1.219802] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.219839] AMD IOMMUv2 functionality not available on this system
[ 1.219970] TCP: cubic registered
[ 1.220056] NET: Registered protocol family 10
[ 1.220277] mip6: Mobile IPv6
[ 1.220314] NET: Registered protocol family 17
[ 1.220351] mpls_gso: MPLS GSO support
[ 1.220689] PM: Hibernation image not present or could not be loaded.
[ 1.220704] registered taskstats version 1
[ 1.221421] rtc_cmos 00:05: setting system clock to 2013-12-09 07:18:58 UTC (1386573538)
[ 1.222558] Freeing unused kernel memory: 968K (ffffffff818a6000 - ffffffff81998000)
[ 1.222608] Write protecting the kernel read-only data: 8192k
[ 1.227308] Freeing unused kernel memory: 1524K (ffff880001483000 - ffff880001600000)
[ 1.228806] Freeing unused kernel memory: 472K (ffff88000178a000 - ffff880001800000)
[ 1.243290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.243609] systemd-udevd[56]: starting version 204
[ 1.263567] ACPI: bus type USB registered
[ 1.263669] usbcore: registered new interface driver usbfs
[ 1.263715] usbcore: registered new interface driver hub
[ 1.268279] SCSI subsystem initialized
[ 1.268472] usbcore: registered new device driver usb
[ 1.268912] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.269194] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.269391] ohci-pci: OHCI PCI platform driver
[ 1.269612] ohci-pci 0000:00:12.0: setting latency timer to 64
[ 1.269618] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.269672] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.269714] ehci-pci: EHCI PCI platform driver
[ 1.269721] QUIRK: Enable AMD PLL fix
[ 1.269756] ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
[ 1.274276] ACPI: bus type ATA registered
[ 1.278267] libata version 3.00 loaded.
[ 1.317916] ACPI: Fan [FAN0] (off)
[ 1.319896] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.319973] ACPI: Thermal Zone [CPUZ] (62 C)
[ 1.320066] ACPI: Fan [FAN1] (off)
[ 1.320143] ACPI: Fan [FAN2] (off)
[ 1.320222] ACPI: Fan [FAN3] (off)
[ 1.320304] ACPI: Fan [FAN4] (off)
[ 1.326503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.326547] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.326587] usb usb1: Product: OHCI PCI host controller
[ 1.326637] usb usb1: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.326674] usb usb1: SerialNumber: 0000:00:12.0
[ 1.327320] hub 1-0:1.0: USB hub found
[ 1.327370] hub 1-0:1.0: 5 ports detected
[ 1.328738] ohci-pci 0000:00:13.0: setting latency timer to 64
[ 1.328744] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.328791] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.328853] ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
[ 1.329345] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.329395] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.329777] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.329960] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000064a000, 1c:c1:de:b8:15:d4, XID 04e00000 IRQ 43
[ 1.337029] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.337076] ACPI: Thermal Zone [TZ3] (20 C)
[ 1.386349] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.386393] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.386433] usb usb2: Product: OHCI PCI host controller
[ 1.386470] usb usb2: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.386507] usb usb2: SerialNumber: 0000:00:13.0
[ 1.386729] hub 2-0:1.0: USB hub found
[ 1.386772] hub 2-0:1.0: 5 ports detected
[ 1.387227] ohci-pci 0000:00:14.5: setting latency timer to 64
[ 1.387230] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.387272] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 3
[ 1.387330] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
[ 1.446393] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446440] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446479] usb usb3: Product: OHCI PCI host controller
[ 1.446516] usb usb3: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.446553] usb usb3: SerialNumber: 0000:00:14.5
[ 1.446772] hub 3-0:1.0: USB hub found
[ 1.446814] hub 3-0:1.0: 2 ports detected
[ 1.447136] ohci-pci 0000:00:16.0: setting latency timer to 64
[ 1.447139] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.447182] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
[ 1.447238] ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
[ 1.506439] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.506485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.506524] usb usb4: Product: OHCI PCI host controller
[ 1.506561] usb usb4: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.506598] usb usb4: SerialNumber: 0000:00:16.0
[ 1.506794] hub 4-0:1.0: USB hub found
[ 1.506835] hub 4-0:1.0: 4 ports detected
[ 1.509078] ehci-pci 0000:00:12.2: setting latency timer to 64
[ 1.570655] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.570703] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 1.570750] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.570801] ehci-pci 0000:00:12.2: debug port 1
[ 1.570876] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
[ 1.582508] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.582575] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.582616] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.582656] usb usb5: Product: EHCI Host Controller
[ 1.582693] usb usb5: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 1.582730] usb usb5: SerialNumber: 0000:00:12.2
[ 1.582933] hub 5-0:1.0: USB hub found
[ 1.582972] hub 5-0:1.0: 5 ports detected
[ 1.646627] hub 1-0:1.0: USB hub found
[ 1.646675] hub 1-0:1.0: 5 ports detected
[ 1.647020] ehci-pci 0000:00:13.2: setting latency timer to 64
[ 1.710769] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.710816] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 1.710863] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.710915] ehci-pci 0000:00:13.2: debug port 1
[ 1.710980] ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
[ 1.722621] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.722685] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.722728] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.722767] usb usb6: Product: EHCI Host Controller
[ 1.722804] usb usb6: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 1.722841] usb usb6: SerialNumber: 0000:00:13.2
[ 1.723047] hub 6-0:1.0: USB hub found
[ 1.723086] hub 6-0:1.0: 5 ports detected
[ 1.786743] hub 2-0:1.0: USB hub found
[ 1.786791] hub 2-0:1.0: 5 ports detected
[ 1.787216] ehci-pci 0000:00:16.2: setting latency timer to 64
[ 1.850872] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.850921] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 1.850971] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.851025] ehci-pci 0000:00:16.2: debug port 1
[ 1.851095] ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
[ 1.898771] usb 5-5: new high-speed USB device number 2 using ehci-pci
[ 1.910752] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.910820] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.910858] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.910897] usb usb7: Product: EHCI Host Controller
[ 1.910934] usb usb7: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 1.910971] usb usb7: SerialNumber: 0000:00:16.2
[ 1.911165] hub 7-0:1.0: USB hub found
[ 1.911205] hub 7-0:1.0: 4 ports detected
[ 1.974894] hub 4-0:1.0: USB hub found
[ 1.974942] hub 4-0:1.0: 4 ports detected
[ 1.975491] ahci 0000:00:11.0: version 3.0
[ 1.975736] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.975785] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.977888] scsi0 : ahci
[ 1.978071] scsi1 : ahci
[ 1.978166] ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
[ 1.978207] ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
[ 2.074931] usb 5-5: New USB device found, idVendor=0461, idProduct=4db6
[ 2.074974] usb 5-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.075013] usb 5-5: Product: Villem
[ 2.075049] usb 5-5: Manufacturer: Primax Electronics Ltd.
[ 2.075086] usb 5-5: SerialNumber: PMX01
[ 2.134180] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.137326] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.137976] usbcore: registered new interface driver usbhid
[ 2.138015] usbhid: USB HID core driver
[ 2.198990] tsc: Refined TSC clocksource calibration: 2194.504 MHz
[ 2.471235] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.472512] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[ 2.472556] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.473949] ata1.00: configured for UDMA/100
[ 2.474230] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5
[ 2.474513] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.474718] sd 0:0:0:0: [sda] Write Protect is off
[ 2.474761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.474860] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.475175] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.477656] ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100
[ 2.480392] ata2.00: configured for UDMA/100
[ 2.482109] scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
[ 2.517745] sda: sda1 sda2 sda3 sda4
[ 2.518421] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.603337] usb 2-4: new full-speed USB device number 2 using ohci-pci
[ 2.778584] usb 2-4: New USB device found, idVendor=0a5c, idProduct=21b4
[ 2.778627] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.778666] usb 2-4: Product: Broadcom 2070 Bluetooth
[ 2.778703] usb 2-4: Manufacturer: Broadcom Corp
[ 2.778739] usb 2-4: SerialNumber: E02A820231BD
[ 3.199903] Switched to clocksource tsc
-- Working dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
[ 0.000000] Command line: auto BOOT_IMAGE=Linux ro root=803
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afceffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afcf0000-0x00000000afdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP 425/1475, BIOS 68DVA Ver. F.03 08/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 5 base 0000FFF40000 mask FFFFFFFF0000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a87000, 0x01a87fff] PGTABLE
[ 0.000000] BRK [0x01a88000, 0x01a88fff] PGTABLE
[ 0.000000] BRK [0x01a89000, 0x01a89fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xafceffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xafbfffff] page 2M
[ 0.000000] [mem 0xafc00000-0xafceffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xafeff000-0xafefffff]
[ 0.000000] [mem 0xafeff000-0xafefffff] page 4k
[ 0.000000] BRK [0x01a8a000, 0x01a8afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f37d000-0x7fffffff]
[ 0.000000] ACPI: RSDP 00000000000f2aa0 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 00000000afefe038 00038 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HPQOEM 307E 00000003 HP 00000001)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000afede000 1B406 (v01 HPQOEM SB700 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000afe8f000 00040
[ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000afedb000 00038 (v01 HPQOEM 307E 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000afeda000 00386 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffa000-0x13fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xafceffff]
[ 0.000000] node 0: [mem 0xafeff000-0xafefffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 982159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9790 pages used for memmap
[ 0.000000] DMA32 zone: 716017 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafcf0000-0xafdcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafdcf000-0xafecefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafecf000-0xafefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s85952 r8192 d20544 u524288
[ 0.000000] pcpu-alloc: s85952 r8192 d20544 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 968708
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=803
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xa4000000-0xa7ffffff]
[ 0.000000] Memory: 3717332K/3928636K available (4607K kernel code, 659K rwdata, 1576K rodata, 968K init, 928K bss, 211304K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2194.598 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.19 BogoMIPS (lpj=8778392)
[ 0.000076] pid_max: default: 32768 minimum: 301
[ 0.000143] Security Framework initialized
[ 0.000183] AppArmor: AppArmor disabled by boot time parameter
[ 0.000219] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000503] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001870] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002538] Mount-cache hash table entries: 256
[ 0.002779] Initializing cgroup subsys memory
[ 0.002830] Initializing cgroup subsys devices
[ 0.002867] Initializing cgroup subsys freezer
[ 0.002904] Initializing cgroup subsys net_cls
[ 0.002940] Initializing cgroup subsys blkio
[ 0.002977] Initializing cgroup subsys perf_event
[ 0.003033] tseg: 00aff00000
[ 0.003037] CPU: Physical Processor ID: 0
[ 0.003073] CPU: Processor Core ID: 0
[ 0.003109] mce: CPU supports 6 MCE banks
[ 0.003150] LVT offset 0 assigned for vector 0xf9
[ 0.003189] process: using AMD E400 aware idle routine
[ 0.003227] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.003227] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.003227] tlb_flushall_shift: 4
[ 0.003351] Freeing SMP alternatives memory: 20K (ffffffff81998000 - ffffffff8199d000)
[ 0.004189] ACPI: Core revision 20130517
[ 0.008785] ACPI: All ACPI Tables successfully acquired
[ 0.038474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078230] smpboot: CPU0: AMD Athlon(tm) II P340 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
[ 0.183711] Performance Events: AMD PMU driver.
[ 0.183782] ... version: 0
[ 0.183819] ... bit width: 48
[ 0.183854] ... generic registers: 4
[ 0.183890] ... value mask: 0000ffffffffffff
[ 0.183927] ... max period: 00007fffffffffff
[ 0.183963] ... fixed-purpose events: 0
[ 0.183999] ... event mask: 000000000000000f
[ 0.184252] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184426] smpboot: Booting Node 0, Processors #1
[ 0.197597] Brought up 2 CPUs
[ 0.197682] process: System has AMD C1E enabled
[ 0.197684] smpboot: Total of 2 processors activated (8778.39 BogoMIPS)
[ 0.197783] process: Switch to broadcast mode on CPU1
[ 0.198282] process: Switch to broadcast mode on CPU0
[ 0.201979] devtmpfs: initialized
[ 0.203816] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[ 0.204068] NET: Registered protocol family 16
[ 0.204208] node 0 link 0: io port [0, ffffff]
[ 0.204211] TOM: 00000000c0000000 aka 3072M
[ 0.204252] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.204254] node 0 link 0: mmio [c0000000, cfffffff]
[ 0.204257] node 0 link 0: mmio [d0000000, d41fffff]
[ 0.204259] node 0 link 0: mmio [d4200000, d43fffff]
[ 0.204261] node 0 link 0: mmio [d4400000, dfffffff]
[ 0.204262] node 0 link 0: mmio [e0000000, e0ffffff] ==> none
[ 0.204264] node 0 link 0: mmio [e1000000, ffb7ffff] ==> [f0000000, ffb7ffff]
[ 0.204267] TOM2: 0000000140000000 aka 5120M
[ 0.204304] bus: [bus 00-1f] on node 0 link 0
[ 0.204305] bus: 00 [io 0x0000-0xffff]
[ 0.204307] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.204308] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.204309] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.204331] ACPI: bus type PCI registered
[ 0.204368] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.204477] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204519] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.216813] PCI: Using configuration type 1 for base access
[ 0.217054] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.217126] mtrr: probably your BIOS does not setup all CPUs.
[ 0.217163] mtrr: corrected configuration.
[ 0.217823] bio: create slab <bio-0> at 0
[ 0.218000] ACPI: Added _OSI(Module Device)
[ 0.218037] ACPI: Added _OSI(Processor Device)
[ 0.218074] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.218648] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.219856] ACPI: EC: Look up EC in DSDT
[ 0.261990] ACPI Error: No handler for Region [ECRM] (ffff88013b2902b8) [EmbeddedControl] (20130517/evregion-162)
[ 0.262102] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130517/exfldio-305)
[ 0.262206] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b287bc8), AE_NOT_EXIST (20130517/psparse-536)
[ 0.262378] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff88013b287bc8), AE_NOT_EXIST (20130517/uteval-103)
[ 0.290187] ACPI: Interpreter enabled
[ 0.290243] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 0.290350] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.290468] ACPI: (supports S0 S3 S4 S5)
[ 0.290505] ACPI: Using IOAPIC for interrupt routing
[ 0.290739] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.290907] ACPI: No dock devices found.
[ 0.299672] ACPI: Power Resource [APPR] (off)
[ 0.443715] ACPI: Power Resource [PFN0] (off)
[ 0.443798] ACPI: Power Resource [PFN1] (off)
[ 0.443877] ACPI: Power Resource [PFN2] (off)
[ 0.443948] ACPI: Power Resource [PFN3] (off)
[ 0.444022] ACPI: Power Resource [PFN4] (off)
[ 0.444712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.444788] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.444828] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.445013] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored
[ 0.445062] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.445105] acpi PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.445251] PCI host bridge to bus 0000:00
[ 0.445293] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.445331] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.445369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.445406] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.445444] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.445482] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.445519] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.445557] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.445595] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.445632] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.445670] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.445708] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.445746] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.445783] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.445821] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.445859] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.445906] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.446027] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[ 0.446116] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.446152] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.446192] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.446268] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.446303] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.446342] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.446418] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.446459] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.446498] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.446584] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.446603] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
[ 0.446613] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
[ 0.446622] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
[ 0.446631] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
[ 0.446640] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
[ 0.446649] pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
[ 0.446759] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.446773] pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
[ 0.446870] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.446947] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.446966] pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
[ 0.447044] pci 0000:00:12.2: supports D1 D2
[ 0.447046] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.447086] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.447162] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.447175] pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
[ 0.447272] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.447349] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.447367] pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
[ 0.447446] pci 0000:00:13.2: supports D1 D2
[ 0.447448] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.447488] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.447565] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.447692] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.447713] pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.447776] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.447815] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.447887] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.448014] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.448105] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.448119] pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
[ 0.448237] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.448251] pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
[ 0.448376] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.448395] pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
[ 0.448473] pci 0000:00:16.2: supports D1 D2
[ 0.448474] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.448553] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.448618] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.448677] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.448737] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.448800] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.448945] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[ 0.448954] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.448959] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
[ 0.448964] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
[ 0.448975] pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
[ 0.448993] pci 0000:01:05.0: supports D1 D2
[ 0.449032] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[ 0.449040] pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
[ 0.449072] pci 0000:01:05.1: supports D1 D2
[ 0.449137] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.449177] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.449180] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.449184] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.449270] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.449283] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.449305] pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.449318] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.449328] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.449376] pci 0000:02:00.0: supports D1 D2
[ 0.449378] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449406] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.458108] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.458154] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.458158] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.458162] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.458288] acpiphp: Slot [1] registered
[ 0.458344] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.458383] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.458386] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.458390] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.458491] pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
[ 0.458511] pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
[ 0.458603] pci 0000:06:00.0: supports D1 D2
[ 0.470132] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.470183] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.470278] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[ 0.470318] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.470325] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.470327] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.470329] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.470332] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.470334] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.470336] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.470338] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.470340] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.470342] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.470344] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.470346] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.470348] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.470350] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.470352] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.470354] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.526405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.526909] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.527411] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.527911] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.528397] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.528867] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.529337] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.529807] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.530430] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.530536] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.530597] Found 1 acpi root devices
[ 0.530643] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.530815] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.530856] vgaarb: loaded
[ 0.530891] vgaarb: bridge control possible 0000:01:05.0
[ 0.530972] PCI: Using ACPI for IRQ routing
[ 0.538924] PCI: pci_cache_line_size set to 64 bytes
[ 0.539067] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.539069] e820: reserve RAM buffer [mem 0xafcf0000-0xafffffff]
[ 0.539071] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 0.539194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.539360] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.541447] Switched to clocksource hpet
[ 0.543404] pnp: PnP ACPI init
[ 0.543460] ACPI: bus type PNP registered
[ 0.545583] pnp 00:00: [dma 4]
[ 0.545637] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.545678] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.545706] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.545820] system 00:03: [io 0x0400-0x04cf] could not be reserved
[ 0.545865] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.545902] system 00:03: [io 0x04d6] has been reserved
[ 0.545940] system 00:03: [io 0x0680-0x06ff] has been reserved
[ 0.545977] system 00:03: [io 0x077a] has been reserved
[ 0.546014] system 00:03: [io 0x0c00-0x0c01] has been reserved
[ 0.546052] system 00:03: [io 0x0c14] has been reserved
[ 0.546089] system 00:03: [io 0x0c50-0x0c52] has been reserved
[ 0.546127] system 00:03: [io 0x0c6c] has been reserved
[ 0.546164] system 00:03: [io 0x0c6f] has been reserved
[ 0.546201] system 00:03: [io 0x0cd0-0x0cdb] has been reserved
[ 0.546239] system 00:03: [io 0x0220-0x0227] has been reserved
[ 0.546276] system 00:03: [io 0x0260-0x0273] has been reserved
[ 0.546314] system 00:03: [io 0x0800] has been reserved
[ 0.546351] system 00:03: [io 0x0804] has been reserved
[ 0.546388] system 00:03: [io 0x087f] has been reserved
[ 0.546426] system 00:03: [io 0x0cdc-0x0cdf] has been reserved
[ 0.546464] system 00:03: [io 0x0b00-0x0b0f] has been reserved
[ 0.546501] system 00:03: [io 0x0b20-0x0b3f] has been reserved
[ 0.546539] system 00:03: [io 0x0200-0x027f] could not be reserved
[ 0.546577] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.546660] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.546704] system 00:04: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.546742] system 00:04: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.546780] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.546818] system 00:04: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.546856] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.546894] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.546933] system 00:04: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.546971] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.547027] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.547122] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.547177] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.547209] pnp 00:08: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
[ 0.665917] pnp: PnP ACPI: found 9 devices
[ 0.665959] ACPI: bus type PNP unregistered
[ 0.673516] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.673600] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.673639] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.673678] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.673716] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.673761] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 0.673801] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.673839] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.673877] pci 0000:00:04.0: bridge window [mem 0xd3200000-0xd41fffff]
[ 0.673916] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.673957] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.673994] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.674033] pci 0000:00:07.0: bridge window [mem 0xd2200000-0xd31fffff]
[ 0.674071] pci 0000:00:07.0: bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.674113] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 0.674151] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.674191] pci 0000:00:14.4: PCI bridge to [bus 07]
[ 0.674229] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.674281] pci 0000:00:01.0: setting latency timer to 64
[ 0.674601] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.674603] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.674605] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.674607] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.674609] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.674611] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.674613] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.674615] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.674617] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.674619] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.674621] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.674623] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.674625] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.674627] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.674629] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.674631] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.674633] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 0.674636] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.674638] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.674640] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
[ 0.674642] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[ 0.674644] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.674646] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
[ 0.674649] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
[ 0.674651] pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
[ 0.674653] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.674655] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.674657] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.674659] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.674661] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.674663] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.674665] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.674667] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.674669] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.674671] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.674673] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.674674] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.674676] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.674678] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.674680] pci_bus 0000:07: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.674682] pci_bus 0000:07: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.674750] NET: Registered protocol family 2
[ 0.675009] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.675230] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.675462] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.675552] TCP: reno registered
[ 0.675602] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675670] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675836] NET: Registered protocol family 1
[ 0.675886] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.786074] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.898169] pci 0000:01:05.0: Boot video device
[ 0.898222] Unpacking initramfs...
[ 1.177170] Freeing initrd memory: 12812K (ffff88007f37d000 - ffff880080000000)
[ 1.178102] PCI-DMA: Disabling AGP.
[ 1.179460] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 1.179497] PCI-DMA: using GART IOMMU.
[ 1.179535] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.183118] LVT offset 1 assigned for vector 0x400
[ 1.183173] IBS: LVT offset 1 assigned
[ 1.183242] perf: AMD IBS detected (0x0000001f)
[ 1.183605] audit: initializing netlink socket (disabled)
[ 1.183655] type=2000 audit(1386573874.048:1): initialized
[ 1.196738] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.197382] VFS: Disk quotas dquot_6.5.2
[ 1.197469] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.197618] msgmni has been set to 7414
[ 1.198013] alg: No test for stdrng (krng)
[ 1.198103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.198203] io scheduler noop registered
[ 1.198245] io scheduler deadline registered
[ 1.198305] io scheduler cfq registered (default)
[ 1.198454] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.198509] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.198559] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.198622] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.198707] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.198838] GHES: HEST is not enabled!
[ 1.198967] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.199600] hpet_acpi_add: no address or irqs in _CRS
[ 1.199648] Linux agpgart interface v0.103
[ 1.199763] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.202137] i8042: Detected active multiplexing controller, rev 1.1
[ 1.202862] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.202902] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.202961] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.203014] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.203067] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.203249] mousedev: PS/2 mouse device common for all mice
[ 1.203324] rtc_cmos 00:05: RTC can wake from S4
[ 1.203509] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.203568] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.203611] cpuidle: using governor ladder
[ 1.203648] cpuidle: using governor menu
[ 1.203686] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.203723] AMD IOMMUv2 functionality not available on this system
[ 1.203851] TCP: cubic registered
[ 1.203935] NET: Registered protocol family 10
[ 1.204161] mip6: Mobile IPv6
[ 1.204202] NET: Registered protocol family 17
[ 1.204241] mpls_gso: MPLS GSO support
[ 1.204590] PM: Hibernation image not present or could not be loaded.
[ 1.204607] registered taskstats version 1
[ 1.205411] rtc_cmos 00:05: setting system clock to 2013-12-09 07:24:34 UTC (1386573874)
[ 1.206544] Freeing unused kernel memory: 968K (ffffffff818a6000 - ffffffff81998000)
[ 1.206625] Write protecting the kernel read-only data: 8192k
[ 1.211308] Freeing unused kernel memory: 1524K (ffff880001483000 - ffff880001600000)
[ 1.212818] Freeing unused kernel memory: 472K (ffff88000178a000 - ffff880001800000)
[ 1.227599] systemd-udevd[56]: starting version 204
[ 1.228026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.244817] SCSI subsystem initialized
[ 1.249936] ACPI: bus type USB registered
[ 1.250005] usbcore: registered new interface driver usbfs
[ 1.251687] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.251784] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.252122] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.252324] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000060e000, 1c:c1:de:b8:15:d4, XID 04e00000 IRQ 43
[ 1.252969] usbcore: registered new interface driver hub
[ 1.253079] ACPI: bus type ATA registered
[ 1.253153] usbcore: registered new device driver usb
[ 1.254470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.254771] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.254949] ohci-pci: OHCI PCI platform driver
[ 1.255049] libata version 3.00 loaded.
[ 1.255197] ohci-pci 0000:00:12.0: setting latency timer to 64
[ 1.255204] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.255254] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.255305] QUIRK: Enable AMD PLL fix
[ 1.255340] ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
[ 1.257195] ehci-pci: EHCI PCI platform driver
[ 1.300153] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.300231] ACPI: Thermal Zone [CPUZ] (63 C)
[ 1.300371] ACPI: Fan [FAN0] (off)
[ 1.300473] ACPI: Fan [FAN1] (off)
[ 1.300554] ACPI: Fan [FAN2] (off)
[ 1.300634] ACPI: Fan [FAN3] (off)
[ 1.300714] ACPI: Fan [FAN4] (off)
[ 1.314173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.314217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.314257] usb usb1: Product: OHCI PCI host controller
[ 1.314294] usb usb1: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.314333] usb usb1: SerialNumber: 0000:00:12.0
[ 1.314506] hub 1-0:1.0: USB hub found
[ 1.314548] hub 1-0:1.0: 5 ports detected
[ 1.314897] ohci-pci 0000:00:13.0: setting latency timer to 64
[ 1.314901] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.314942] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.315001] ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
[ 1.319857] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.319904] ACPI: Thermal Zone [TZ3] (20 C)
[ 1.374228] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.374272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.374312] usb usb2: Product: OHCI PCI host controller
[ 1.374349] usb usb2: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.374386] usb usb2: SerialNumber: 0000:00:13.0
[ 1.374609] hub 2-0:1.0: USB hub found
[ 1.374652] hub 2-0:1.0: 5 ports detected
[ 1.375114] ohci-pci 0000:00:14.5: setting latency timer to 64
[ 1.375117] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.375158] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 3
[ 1.375216] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
[ 1.434274] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.434320] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.434359] usb usb3: Product: OHCI PCI host controller
[ 1.434396] usb usb3: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.434433] usb usb3: SerialNumber: 0000:00:14.5
[ 1.434642] hub 3-0:1.0: USB hub found
[ 1.434683] hub 3-0:1.0: 2 ports detected
[ 1.435011] ohci-pci 0000:00:16.0: setting latency timer to 64
[ 1.435015] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.435056] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
[ 1.435112] ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
[ 1.494322] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.494368] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.494408] usb usb4: Product: OHCI PCI host controller
[ 1.494445] usb usb4: Manufacturer: Linux 3.11-2-amd64 ohci_hcd
[ 1.494481] usb usb4: SerialNumber: 0000:00:16.0
[ 1.494689] hub 4-0:1.0: USB hub found
[ 1.494731] hub 4-0:1.0: 4 ports detected
[ 1.494898] ahci 0000:00:11.0: version 3.0
[ 1.495491] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.495537] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.495965] scsi0 : ahci
[ 1.496777] scsi1 : ahci
[ 1.496879] ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
[ 1.496925] ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
[ 1.497410] ehci-pci 0000:00:12.2: setting latency timer to 64
[ 1.558538] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.558587] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 1.558630] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.558682] ehci-pci 0000:00:12.2: debug port 1
[ 1.558758] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
[ 1.570386] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.570453] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.570493] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.570533] usb usb5: Product: EHCI Host Controller
[ 1.570570] usb usb5: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 1.570607] usb usb5: SerialNumber: 0000:00:12.2
[ 1.570848] hub 5-0:1.0: USB hub found
[ 1.570892] hub 5-0:1.0: 5 ports detected
[ 1.634513] hub 1-0:1.0: USB hub found
[ 1.634562] hub 1-0:1.0: 5 ports detected
[ 1.634909] ehci-pci 0000:00:13.2: setting latency timer to 64
[ 1.698651] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.698698] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 1.698741] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.698793] ehci-pci 0000:00:13.2: debug port 1
[ 1.698860] ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
[ 1.710520] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.710591] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.710631] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710672] usb usb6: Product: EHCI Host Controller
[ 1.710709] usb usb6: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 1.710747] usb usb6: SerialNumber: 0000:00:13.2
[ 1.710965] hub 6-0:1.0: USB hub found
[ 1.711004] hub 6-0:1.0: 5 ports detected
[ 1.774636] hub 2-0:1.0: USB hub found
[ 1.774683] hub 2-0:1.0: 5 ports detected
[ 1.775107] ehci-pci 0000:00:16.2: setting latency timer to 64
[ 1.838754] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.838804] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 1.838850] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.838902] ehci-pci 0000:00:16.2: debug port 1
[ 1.838975] ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
[ 1.886654] usb 5-5: new high-speed USB device number 2 using ehci-pci
[ 1.898655] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.898721] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.898759] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.898798] usb usb7: Product: EHCI Host Controller
[ 1.898835] usb usb7: Manufacturer: Linux 3.11-2-amd64 ehci_hcd
[ 1.898872] usb usb7: SerialNumber: 0000:00:16.2
[ 1.899061] hub 7-0:1.0: USB hub found
[ 1.899100] hub 7-0:1.0: 4 ports detected
[ 1.962786] hub 4-0:1.0: USB hub found
[ 1.962833] hub 4-0:1.0: 4 ports detected
[ 1.986732] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.988014] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[ 1.988058] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.989434] ata1.00: configured for UDMA/100
[ 1.989716] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5
[ 1.990694] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.992233] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.993043] sd 0:0:0:0: [sda] Write Protect is off
[ 1.993086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.993142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.993149] ata2.00: ATAPI: hp DVDRAM GT30L, mP04, max UDMA/100
[ 1.995952] ata2.00: configured for UDMA/100
[ 1.997656] scsi 1:0:0:0: CD-ROM hp DVDRAM GT30L mP04 PQ: 0 ANSI: 5
[ 2.002597] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.002658] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.002832] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.004885] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.005074] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.038933] sda: sda1 sda2 sda3 sda4
[ 2.039463] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.062949] usb 5-5: New USB device found, idVendor=0461, idProduct=4db6
[ 2.062993] usb 5-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.063031] usb 5-5: Product: Villem
[ 2.063068] usb 5-5: Manufacturer: Primax Electronics Ltd.
[ 2.063105] usb 5-5: SerialNumber: PMX01
[ 2.182889] tsc: Refined TSC clocksource calibration: 2194.503 MHz
[ 2.591208] usb 2-4: new full-speed USB device number 2 using ohci-pci
[ 2.766413] usb 2-4: New USB device found, idVendor=0a5c, idProduct=21b4
[ 2.766458] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.766498] usb 2-4: Product: Broadcom 2070 Bluetooth
[ 2.766535] usb 2-4: Manufacturer: Broadcom Corp
[ 2.766572] usb 2-4: SerialNumber: E02A820231BD
[ 2.909757] PM: Starting manual resume from disk
[ 2.909805] PM: Hibernation image partition 8:2 present
[ 2.909807] PM: Looking for hibernation image.
[ 2.910087] PM: Image not found (code -22)
[ 2.910092] PM: Hibernation image not present or could not be loaded.
[ 2.944894] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.183774] Switched to clocksource tsc
[ 4.834808] systemd-udevd[346]: starting version 204
[ 5.991818] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 5.991916] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 5.991971] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 5.992043] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 6.004690] bcma: bus0: Bus registered
[ 6.066093] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBO 1 (20130517/utaddress-251)
[ 6.066207] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.190293] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.199311] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.199400] sp5100_tco: PCI Revision ID: 0x42
[ 6.199475] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.199523] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.199777] sp5100_tco: initialized (0xffffc9000064eb00). heartbeat=60 sec (nowayout=0)
[ 6.312066] ACPI: AC Adapter [AC] (on-line)
[ 6.321715] ACPI: processor limited to max C-state 1
[ 6.321947] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 6.322002] ACPI: Sleep Button [SLPB]
[ 6.322084] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.328574] media: Linux media interface: v0.10
[ 6.336760] ACPI: Lid Switch [LID]
[ 6.336888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.336935] ACPI: Power Button [PWRF]
[ 6.341333] acpi device:02: registered as cooling_device7
[ 6.341895] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 6.342011] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4
[ 6.363122] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.383025] Linux video capture interface: v2.00
[ 6.426132] wmi: Mapper loaded
[ 6.586327] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.595452] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.652124] EDAC MC: Ver: 3.0.0
[ 6.660507] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.683603] Bluetooth: Core ver 2.16
[ 6.683668] NET: Registered protocol family 31
[ 6.683707] Bluetooth: HCI device and connection manager initialized
[ 6.683757] Bluetooth: HCI socket layer initialized
[ 6.683797] Bluetooth: L2CAP socket layer initialized
[ 6.683837] Bluetooth: SCO socket layer initialized
[ 6.757460] usbcore: registered new interface driver btusb
[ 6.788265] microcode: CPU0: patch_level=0x010000c8
[ 6.915737] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 6.925514] [drm] Initialized drm 1.1.0 20060810
[ 6.940015] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.940283] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.941504] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 6.947805] MCE: In-kernel MCE decoding enabled.
[ 6.949245] AMD64 EDAC driver v3.4.0
[ 6.949487] EDAC amd64: DRAM ECC disabled.
[ 6.949567] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.949567] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 6.949567] (Note that use of the override may cause unknown side effects.)
[ 7.053727] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input9
[ 7.091732] platform microcode: firmware: agent aborted loading amd-ucode/microcode_amd.bin (not found?)
[ 7.092054] microcode: CPU1: patch_level=0x010000c8
[ 7.092186] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.106072] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 7.153489] uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
[ 7.161934] input: Villem as /devices/pci0000:00/0000:00:12.2/usb5/5-5/5-5:1.0/input/input11
[ 7.162182] usbcore: registered new interface driver uvcvideo
[ 7.162229] USB Video Class driver (1.1.1)
[ 7.359724] cfg80211: Calling CRDA to update world regulatory domain
[ 7.462330] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 646827
[ 7.507100] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 7.542770] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 7.542838] b43: probe of bcma0:0 failed with error -524
[ 7.542929] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 7.605957] [drm] radeon kernel modesetting enabled.
[ 7.639574] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475).
[ 7.639658] [drm] register mmio base: 0xD4300000
[ 7.639702] [drm] register mmio size: 65536
[ 7.640609] ATOM BIOS: HP_Valima
[ 7.640687] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 7.640740] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 7.640793] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.640837] [drm] RAM width 32bits DDR
[ 7.640991] [TTM] Zone kernel: Available graphics memory: 1899540 kiB
[ 7.641037] [TTM] Initializing pool allocator
[ 7.641088] [TTM] Initializing DMA pool allocator
[ 7.641168] [drm] radeon: 256M of VRAM memory ready
[ 7.641213] [drm] radeon: 512M of GTT memory ready.
[ 7.641286] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.646920] [drm] Loading RS780 Microcode
[ 7.649585] kvm: Nested Virtualization enabled
[ 7.649645] kvm: Nested Paging enabled
[ 7.674965] radeon 0000:01:05.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
[ 7.680125] radeon 0000:01:05.0: firmware: agent loaded radeon/RS780_me.bin into memory
[ 7.690406] radeon 0000:01:05.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[ 7.693472] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 7.693668] radeon 0000:01:05.0: WB enabled
[ 7.693717] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880138429c00
[ 7.693771] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880138429c0c
[ 7.693824] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.693868] [drm] Driver supports precise vblank timestamp query.
[ 7.693936] [drm] radeon: irq initialized.
[ 7.694326] radeon 0000:01:05.0: setting latency timer to 64
[ 7.726582] [drm] ring test on 0 succeeded in 0 usecs
[ 7.726686] [drm] ring test on 3 succeeded in 1 usecs
[ 7.726951] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.727013] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.727617] [drm] radeon atom DIG backlight initialized
[ 7.727663] [drm] Radeon Display Connectors
[ 7.727706] [drm] Connector 0:
[ 7.727749] [drm] VGA-1
[ 7.727792] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 7.727841] [drm] Encoders:
[ 7.727883] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.728444] [drm] Connector 1:
[ 7.728486] [drm] LVDS-1
[ 7.728529] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 7.728576] [drm] Encoders:
[ 7.728618] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 7.728660] [drm] Connector 2:
[ 7.728702] [drm] HDMI-A-1
[ 7.728744] [drm] HPD1
[ 7.728787] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 7.728833] [drm] Encoders:
[ 7.728875] [drm] DFP1: INTERNAL_UNIPHY
[ 7.729028] [drm] radeon: power management initialized
[ 7.887986] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 7.943371] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.725878] [drm] fb mappable at 0xC0142000
[ 8.725931] [drm] vram apper at 0xC0000000
[ 8.725975] [drm] size 4325376
[ 8.726017] [drm] fb depth is 24
[ 8.726059] [drm] pitch is 5632
[ 8.726295] fbcon: radeondrmfb (fb0) is primary device
[ 8.792878] Console: switching to colour frame buffer device 170x48
[ 8.805408] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 8.805528] radeon 0000:01:05.0: registered panic notifier
[ 8.805658] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
[ 9.948846] Adding 2312188k swap on /dev/sda2. Priority:-1 extents:1 across:2312188k
[ 10.013602] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.575039] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 11.969112] fuse init (API version 7.22)
[ 12.001735] loop: module loaded
[ 12.360841] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 12.371798] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 12.561134] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.687226] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[ 13.702346] brcmsmac bcma0:0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[ 13.753324] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 13.757357] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[ 13.761571] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.770835] wlan0: authenticate with 00:22:75:da:c1:a1
[ 15.777421] wlan0: send auth to 00:22:75:da:c1:a1 (try 1/3)
[ 15.785427] wlan0: authenticated
[ 15.793967] wlan0: associate with 00:22:75:da:c1:a1 (try 1/3)
[ 15.808627] wlan0: RX AssocResp from 00:22:75:da:c1:a1 (capab=0x431 status=0 aid=9)
[ 15.813971] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 15.818191] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 15.822388] wlan0: associated
[ 15.826510] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.180855] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
-- cat /etc/lilo.conf output:
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --------------- `install-mbr(8)', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.
# +---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt' (if you have created it), or |
# | install a new kernel. The computer will most likely fail to |
# | boot if a kernel-image post-install script or you don't |
# | remember to run `lilo'. |
# | |
# +---------------------------------------------------------------+
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/sda
lba32
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/sda3
# This option may be needed for some software RAID installs.
#
# raid-extra-boot=mbr-only
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller. Using `compact' is especially recommended when
# booting from a floppy disk. It is disabled here by default
# because it doesn't always work.
#
compact
# Installs the specified file as the new boot sector
# You have the choice between: text, bmp, and menu
# Look in lilo.conf(5) manpage for details
#
#install=menu
# Specifies the location of the map file
#
map=/boot/map
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration. If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well. Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20
# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
# prompt
# delay=100
# timeout=100
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>)
#
# vga=ask
# vga=9
#
# Kernel command line options that apply to all installed images go
# here. See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=
# If you used a serial console to install Debian, this option should be
# enabled by default.
# serial=
#
# Boot up Linux by default.
#
default=Linux
image=/vmlinuz
label=Linux
read-only
# restricted
# alias=1
initrd=/initrd.img
image=/vmlinuz.old
label=LinuxOLD
read-only
optional
# restricted
# alias=2
initrd=/initrd.img.old
# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
# other=/dev/hda4
# label=HURD
# restricted
# alias=3
image=/vmlinuz.old
label=LinuxHZ
read-only
initrd=/initrd.img.old
append="nohz=off"
image=/vmlinuz
label=LinuxHZ2
read-only
initrd=/initrd.img
append="nohz=off"
-- cat /proc/cpuinfo output:
Mssor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II P340 Dual-Core Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a 3dnowprefetch osvw ibs skinit wdt nodeid_msr hw_pstate npt lbrv svm_lock nrip_save
bogomips : 4388.55
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II P340 Dual-Core Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a 3dnowprefetch osvw ibs skinit wdt nodeid_msr hw_pstate npt lbrv svm_lock nrip_save
bogomips : 4389.03
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Reply to: