Control: tag -1 upstream patch moreinfo On Sat, 2013-11-30 at 23:07 +0100, Thomas Jansson wrote: > Package: src:linux > Version: 3.11.8-1 > Severity: normal > > Dear Maintainer, > *** Please consider answering these questions, where appropriate *** > > * What led up to the situation? > After the lastest kernel update to this kernel version I experinced > very slow network performance from my Debian homeserver to other > machines. Receiving files from the server through HTTP, NFS, SCP, CIFS and > through iperf showed that the sending speed was around 55Mbit/s where > I usually get around 950Mbit/s. [...] Does the attached patch fix it? Instructions for building a patched kernel are at <http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official>. Ben. -- Ben Hutchings friends: People who know you well, but like you anyway.
From: Eric Dumazet <edumazet@google.com>
Date: Wed, 13 Nov 2013 06:32:54 -0800
Subject: tcp: tsq: restore minimal amount of queueing
Origin: https://git.kernel.org/cgit/linux/kernel/git/davem/net.git/commit?id=98e09386c0ef4dfd48af7ba60ff908f0d525cdee
After commit c9eeec26e32e ("tcp: TSQ can use a dynamic limit"), several
users reported throughput regressions, notably on mvneta and wifi
adapters.
802.11 AMPDU requires a fair amount of queueing to be effective.
This patch partially reverts the change done in tcp_write_xmit()
so that the minimal amount is sysctl_tcp_limit_output_bytes.
It also remove the use of this sysctl while building skb stored
in write queue, as TSO autosizing does the right thing anyway.
Users with well behaving NICS and correct qdisc (like sch_fq),
can then lower the default sysctl_tcp_limit_output_bytes value from
128KB to 8KB.
This new usage of sysctl_tcp_limit_output_bytes permits each driver
authors to check how their driver performs when/if the value is set
to a minimum of 4KB.
Normally, line rate for a single TCP flow should be possible,
but some drivers rely on timers to perform TX completion and
too long TX completion delays prevent reaching full throughput.
Fixes: c9eeec26e32e ("tcp: TSQ can use a dynamic limit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Sujith Manoharan <sujith@msujith.org>
Reported-by: Arnaud Ebalard <arno@natisbad.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/networking/ip-sysctl.txt | 3 ---
net/ipv4/tcp.c | 6 ------
net/ipv4/tcp_output.c | 6 +++++-
3 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8b8a057..3c12d9a 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -577,9 +577,6 @@ tcp_limit_output_bytes - INTEGER
typical pfifo_fast qdiscs.
tcp_limit_output_bytes limits the number of bytes on qdisc
or device to reduce artificial RTT/cwnd and reduce bufferbloat.
- Note: For GSO/TSO enabled flows, we try to have at least two
- packets in flight. Reducing tcp_limit_output_bytes might also
- reduce the size of individual GSO packet (64KB being the max)
Default: 131072
tcp_challenge_ack_limit - INTEGER
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 8e8529d..3dc0c6c 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -808,12 +808,6 @@ static unsigned int tcp_xmit_size_goal(struct sock *sk, u32 mss_now,
xmit_size_goal = min_t(u32, gso_size,
sk->sk_gso_max_size - 1 - hlen);
- /* TSQ : try to have at least two segments in flight
- * (one in NIC TX ring, another in Qdisc)
- */
- xmit_size_goal = min_t(u32, xmit_size_goal,
- sysctl_tcp_limit_output_bytes >> 1);
-
xmit_size_goal = tcp_bound_to_half_wnd(tp, xmit_size_goal);
/* We try hard to avoid divides here */
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 6728546..c5231d9 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1875,8 +1875,12 @@ static bool tcp_write_xmit(struct sock *sk, unsigned int mss_now, int nonagle,
* - better RTT estimation and ACK scheduling
* - faster recovery
* - high rates
+ * Alas, some drivers / subsystems require a fair amount
+ * of queued bytes to ensure line rate.
+ * One example is wifi aggregation (802.11 AMPDU)
*/
- limit = max(skb->truesize, sk->sk_pacing_rate >> 10);
+ limit = max_t(unsigned int, sysctl_tcp_limit_output_bytes,
+ sk->sk_pacing_rate >> 10);
if (atomic_read(&sk->sk_wmem_alloc) > limit) {
set_bit(TSQ_THROTTLED, &tp->tsq_flags);
Attachment:
signature.asc
Description: This is a digitally signed message part