Bug#730489: linux-image-3.11-2-amd64: getting kernel panic with every 3.11 boot
Package: src:linux
Version: 3.11.8-1
Severity: important
Dear Maintainer,
This is going to be longish bug-report. I do not know whether the
culprit is RAM (the chip is only 2 years old but you never know) or
systemd or the kernel or something else entirely. I have also removed
networking info. for personal safety persons.
What had happened is electricity had gone out. When it came back and I
tried to boot the kernel it gave a kernel panic. I tried to use the
boot_delay parameter and have tried to use that. These are the
contents of my /etc/default/grub :-
$ cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=50000
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 init=/usr/lib/systemd
boot_delay=2000"
GRUB_CMDLINE_LINUX="systemd.log_target=kmsg systemd.log_level=debug"
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=800x600x32
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_THEME="/usr/share/grub/themes/starfield/theme.txt"
GRUB_BACKGROUND=/usr/share/images/grub/Moraine_Lake_17092005.tga
This is the first time I used the boot_delay parameter so dunno if I
did it the right or the wrong way.
I do not have access to serial console so all the info. was by hand so
it's possible that some error/s might have crept up. In case of that,
please lemme know and I'll try to retake all and any info. which might
be useful.
The first hint something is/was wrong seems to be here while booting.
address space collision [100x800-0x087f] conflicts with ACPI CPU
throttle [??? 0x000008100x00000815 flag 0x8000000]
ACPI : bus type reserved
then I got many messages about system where some addresses could not
be reserved. It went too fast for me to write them down.
then remember seeing the messages about initramfs and initrd. They
went by pretty fast so couldn't jot them down. After a screen or two
and came across this :-
-C DEV Reopen stdio to DEV after switch
[350.693265] Kernel panic - not syncing. Attempted to kill init !
exitcode=0x00000100
[350.693265]
[350.693359] CPU:0ID:busybox not tainted 3.11-2-amd64 #Debian 3.11.8-1
[350.693359] Hardware name, system manufacturer, System Product Name|
P5KPL-AM IN, BIOS 0507 01/15/2010
[350.693503] ffff88007cba7ed8 ffffffff8147a72 ffffffff81672f50 ffffffff81472070
[350.693647] 0000000000000010 ffff88007cbaee8 ffff88-007cba7e88 ffffffff810fc4c2
[350.693790] 0000000000000100 ffff88007cb9fa40 00000000000000036
ffffffff819e1680
[350.693933] Call Trace :
[350.693981] [<ffffffff81474a72>] ? dump_stack +0x41/0x51
[350.694032] [<ffffffff81472070>] ? panic +0xC3/0x1d2
[350.694082] [<ffffffff810fc4c2>] ? task_function_call +0x42/0x50
[350.694134] [<ffffffff8105ad4c>] ? do_exitx092c/0xa60
[350.694182] [<ffffffff8105aee4>] ? do_group_exit +0x34/0xa0
[350.694232] [<ffffffff8105af56>] ? SyS_exit_group +0xb10x10
[350.694283] [<ffffffff81481de9>] ? System_call_footpath +0x16/0x16
After this the num lock and the Caps Lock both were blinking and
nothing goes forward.
If there is any more info. needed please lemme know.
-- Package-specific info:
** Version:
Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64
root=UUID=87d82d2b-dc1a-4f01-8ba4-c68290598b23 ro single
systemd.log_target=kmsg systemd.log_level=debug
** Not tainted
** Kernel log:
[ 2.399722] systemd-udevd[318]: starting version 204
[ 3.195750] intel_rng: FWH not detected
[ 3.214456] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.214544] ACPI: Power Button [PWRB]
[ 3.214638] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.214710] ACPI: Power Button [PWRF]
[ 3.242707] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 3.311592] ACPI: Requesting acpi_cpufreq
[ 3.399525] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.423702] leds_ss4200: no LED devices found
[ 3.477677] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 3.492758] platform microcode: firmware: agent loaded
intel-ucode/06-17-0a into memory
[ 3.492876] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 3.496701] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 3.497824] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 3.497926] platform microcode: firmware: agent loaded
intel-ucode/06-17-0a into memory
[ 3.498020] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 3.502019] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 3.505015] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.539463] [drm] Initialized drm 1.1.0 20060810
[ 3.587746] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.667992] iTCO_vendor_support: vendor-support=0
[ 3.668708] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 3.668797] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 3.669019] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.781014] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 3.781185] input: HDA Intel Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 3.781313] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 3.781433] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.781561] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.782253] [drm] Memory usable by graphics device = 512M
[ 3.782309] i915 0000:00:02.0: setting latency timer to 64
[ 3.798371] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 3.798382] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.798437] [drm] Driver supports precise vblank timestamp query.
[ 3.798534] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.799427] [drm] initialized overlay support
[ 3.906194] fbcon: inteldrmfb (fb0) is primary device
[ 3.944423] Console: switching to colour frame buffer device 200x56
[ 3.948675] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.948702] i915 0000:00:02.0: registered panic notifier
[ 3.948735] i915: No ACPI video bus found
[ 3.948806] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.115924] psmouse serio1: logips2pp: Detected unknown Logitech
mouse model 106
[ 4.605445] input: ImExPS/2 Logitech Explorer Mouse as
/devices/platform/i8042/serio1/input/input9
[ 5.828387] Adding 5222396k swap on /dev/sda9. Priority:-1
extents:1 across:5222396k
[ 5.883155] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 6.206547] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 6.860212] loop: module loaded
[ 6.918715] fuse init (API version 7.22)
[ 7.071525] EXT4-fs (sda8): mounted filesystem with ordered data
mode. Opts: (null)
[ 7.109367] EXT4-fs (sda7): mounted filesystem with ordered data
mode. Opts: (null)
[ 7.498896] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.527137] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.582253] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.309168] r8169 0000:01:00.0 eth0: link down
[ 8.310680] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.794805] r8169 0000:01:00.0 eth0: link up
[ 13.797223] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.404646] r8169 0000:01:00.0 eth0: link down
[ 23.734825] r8169 0000:01:00.0 eth0: link up
[ 70.875002] RPC: Registered named UNIX socket transport module.
[ 70.877358] RPC: Registered udp transport module.
[ 70.879597] RPC: Registered tcp transport module.
[ 70.881806] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 70.912270] FS-Cache: Loaded
[ 70.940211] FS-Cache: Netfs 'nfs' registered for caching
[ 70.978737] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 104.088833] systemd-logind[2854]: New seat seat0.
[ 104.104380] systemd-logind[2854]: Watching system buttons on
/dev/input/event2 (Power Button)
[ 104.104442] systemd-logind[2854]: Watching system buttons on
/dev/input/event1 (Power Button)
[ 104.105150] systemd-logind[2854]: New session 1 of user Debian-gdm.
[ 104.105229] systemd-logind[2854]: Linked /tmp/.X11-unix/X0 to
/run/user/111/X11-display.
[ 165.509484] systemd-logind[2854]: New session 2 of user shirish.
[ 165.509565] systemd-logind[2854]: Linked /tmp/.X11-unix/X0 to
/run/user/1000/X11-display.
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0507
board_vendor: ASUSTeK Computer INC.
board_name: P5KPL-AM IN
board_version: X.0x
** Loaded modules:
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ipt_REJECT
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
fuse
loop
snd_hda_codec_via
psmouse
iTCO_wdt
iTCO_vendor_support
coretemp
kvm_intel
kvm
i915
snd_hda_intel
video
snd_hda_codec
drm_kms_helper
drm
snd_hwdep
snd_pcm
i2c_algo_bit
snd_page_alloc
acpi_cpufreq
microcode
mperf
evdev
pcspkr
serio_raw
processor
thermal_sys
lpc_ich
mfd_core
snd_seq
snd_seq_device
snd_timer
i2c_i801
button
i2c_core
rng_core
asus_atk0110
snd
soundcore
ext4
crc16
mbcache
jbd2
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
ehci_pci
uhci_hcd
ehci_hcd
r8169
mii
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31
Express DRAM Controller [8086:29c0] (rev 10)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:82b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31
Express Integrated Graphics Controller [8086:29c2] (rev 10) (prog-if
00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:82b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:83a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fea78000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 7f700000-7f8fffff
Prefetchable memory behind bridge: 000000007f900000-000000007fafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI
Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2
EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fea77c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family)
IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP
SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus
Controller [8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136]
(rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febf0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (600, 'testing'), (1, 'experimental'), (1, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.11-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-15
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false
--
Regards,
Shirish Agarwal शिरीष अग्रवाल
My quotes in this email licensed under CC 3.0
http://creativecommons.org/licenses/by-nc/3.0/
http://flossexperiences.wordpress.com
065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17
Reply to: