Bug#730231: linux-image-3.11-2-amd64: video playback buggy
Package: src:linux
Version: 3.11.8-1
Severity: normal
Dear Maintainer,
I'm running Jessie, and it upgraded my kernel from 3.10 to 3.11 recently. With
the newer version of the kernel, video playback contains a lot of strange
artifacts.
For example, I'll see a thin strip at the top and bottom of a video which are
playing normally, but a big horizontal bar covering 80-90% of the window which
does not advance. If I resize the window I might see the image update to the
current location in the video, but then it will stay frozen. It may also update
a half of the screen, and not the other half.
Basically, it's broken.
Sound works fine, and all other graphics tasks seem fine - for example all X
drawing is perfect.
It doesn't seem to matter what type of video file I play. I have also tried
both VLC and mplayer2, with nearly identical results.
When I boot back into an earlier kernel everything works fine, leading me to
believe that it is likely a kernel bug.
Thanks!
-- Package-specific info:
** Version:
Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13)
** Command line:
BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/ssd_encrypted-root ro quiet
** Tainted: I (2048)
* Working around severe firmware bug.
** Kernel log:
[ 52.443114] Linux video capture interface: v2.00
[ 52.443384] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.443501] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x12
[ 52.443833] iTCO_vendor_support: vendor-support=0
[ 52.444517] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 52.444546] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 52.444626] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 52.444674] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.444712] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x12
[ 52.445265] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 52.445272] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 52.445273] [drm] Driver supports precise vblank timestamp query.
[ 52.445290] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.445332] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x12
[ 52.445338] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 52.445831] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.445859] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x12
[ 52.446083] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.446112] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x12
[ 52.446337] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.446359] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x12
[ 52.446582] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.446611] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x12
[ 52.446815] platform microcode: firmware: agent aborted loading intel-ucode/06-3c-03 (not found?)
[ 52.446858] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 52.449315] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0400)
[ 52.453409] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/input/input6
[ 52.453453] usbcore: registered new interface driver uvcvideo
[ 52.453455] USB Video Class driver (1.1.1)
[ 52.466836] ath: EEPROM regdomain: 0x6c
[ 52.466839] ath: EEPROM indicates we should expect a direct regpair map
[ 52.466841] ath: Country alpha2 being used: 00
[ 52.466842] ath: Regpair used: 0x6c
[ 52.470190] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 52.470321] cfg80211: World regulatory domain updated:
[ 52.470323] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 52.470325] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.470326] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.470328] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 52.470329] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.470330] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 52.470342] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90005d00000, irq=18
[ 52.596841] fbcon: inteldrmfb (fb0) is primary device
[ 53.271777] psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 53.371456] psmouse serio2: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
[ 53.700766] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input7
[ 53.860907] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 54.281011] Console: switching to colour frame buffer device 240x67
[ 54.292855] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 54.292859] i915 0000:00:02.0: registered panic notifier
[ 54.293461] acpi device:4c: registered as cooling_device8
[ 54.293488] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 54.293524] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 54.293614] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 54.293855] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 54.293945] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 54.307098] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 54.307165] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 54.307213] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 54.307695] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 54.307852] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 54.307976] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 54.311045] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 54.311190] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 54.574045] EXT4-fs (dm-3): re-mounted. Opts: (null)
[ 54.628712] EXT4-fs (dm-3): re-mounted. Opts: user_xattr,errors=remount-ro
[ 54.954562] fuse init (API version 7.22)
[ 54.970802] loop: module loaded
[ 55.036464] Adding 16601084k swap on /dev/mapper/ssd_encrypted-swap. Priority:-1 extents:1 across:16601084k SS
[ 55.083278] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 55.084020] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 55.672556] lp: driver loaded but no devices found
[ 55.675222] ppdev: user-space parallel port driver
[ 55.817747] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.820449] r8169 0000:04:00.2: firmware: agent loaded rtl_nic/rtl8411-1.fw into memory
[ 55.901252] r8169 0000:04:00.2 eth0: link down
[ 55.901327] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.797669] wlan0: authenticate with d8:5d:4c:c2:04:5c
[ 62.810967] wlan0: send auth to d8:5d:4c:c2:04:5c (try 1/3)
[ 62.813341] wlan0: authenticated
[ 62.816246] wlan0: associate with d8:5d:4c:c2:04:5c (try 1/3)
[ 62.819935] wlan0: RX AssocResp from d8:5d:4c:c2:04:5c (capab=0x411 status=0 aid=3)
[ 62.819981] wlan0: associated
[ 62.819990] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 62.820077] cfg80211: Calling CRDA for country: NL
[ 62.824244] ath: regdomain 0x8210 updated by CountryIE
[ 62.824248] ath: EEPROM regdomain: 0x8210
[ 62.824249] ath: EEPROM indicates we should expect a country code
[ 62.824250] ath: doing EEPROM country->regdmn map search
[ 62.824252] ath: country maps to regdmn code: 0x37
[ 62.824253] ath: Country alpha2 being used: NL
[ 62.824254] ath: Regpair used: 0x37
[ 62.824275] cfg80211: Regulatory domain changed to country: NL
[ 62.824276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 62.824278] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 62.824279] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 62.824280] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 62.824282] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 62.824283] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 122.161707] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
** Model information
sys_vendor: System76, Inc.
product_name: Gazelle Professional
product_version: gazp9
chassis_vendor: System76, Inc.
chassis_version: gazp9
bios_vendor: American Megatrends Inc.
bios_version: 1.00.05RS76
board_vendor: System76, Inc.
board_name: Gazelle Professional
board_version: gazp9
** Loaded modules:
sha256_generic
parport_pc
ppdev
lp
parport
loop
fuse
snd_hda_codec_via
snd_hda_codec_hdmi
joydev
arc4
x86_pkg_temp_thermal
coretemp
kvm_intel
kvm
ath9k
ath9k_common
ath9k_hw
uvcvideo
ath
videobuf2_vmalloc
videobuf2_memops
iTCO_wdt
mac80211
videobuf2_core
iTCO_vendor_support
videodev
snd_hda_intel
snd_hda_codec
media
cfg80211
psmouse
wmi
microcode
snd_hwdep
snd_pcm
i915
pcspkr
serio_raw
snd_page_alloc
evdev
snd_seq
ath3k
i2c_i801
snd_seq_device
btusb
lpc_ich
drm_kms_helper
snd_timer
bluetooth
drm
i2c_algo_bit
rfkill
i2c_core
acpi_cpufreq
rtsx_pci_ms
mperf
video
memstick
snd
button
ac
battery
mei_me
processor
mei
soundcore
ext4
crc16
mbcache
jbd2
btrfs
xor
zlib_deflate
raid6_pq
libcrc32c
dm_crypt
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
rtsx_pci_sdmmc
mmc_core
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
ahci
libahci
glue_helper
libata
scsi_mod
xhci_hcd
ehci_pci
ehci_hcd
thermal
thermal_sys
rtsx_pci
mfd_core
r8169
usbcore
mii
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 00:90:f5:ea:41:9e brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether f4:b7:e2:03:2f:ad brd ff:ff:ff:ff:ff:ff
inet 172.29.1.199/24 brd 172.29.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 2001:610:719:1:f6b7:e2ff:fe03:2fad/64 scope global dynamic
valid_lft 86285sec preferred_lft 14285sec
inet6 fe80::f6b7:e2ff:fe03:2fad/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 4172 34 0 0 0 0 0 0 4172 34 0 0 0 0 0 0
wlan0: 6393473 6864 0 0 0 0 0 0 1096569 6748 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5943 total packets received
0 forwarded
0 incoming packets discarded
5941 incoming packets delivered
5176 requests sent out
59 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
213 active connections openings
2 passive connection openings
2 failed connection attempts
3 connection resets received
4 connections established
5727 segments received
4138 segments send out
111 segments retransmited
5 bad segments received.
94 resets sent
Udp:
2632 packets received
0 packets to unknown port received.
0 packet receive errors
2422 packets sent
UdpLite:
TcpExt:
73 TCP sockets finished time wait in fast timer
82 delayed acks sent
Quick ack mode was activated 21 times
3407 packet headers predicted
399 acknowledgments not containing data payload received
131 predicted acknowledgments
16 retransmits in slow start
25 other TCP timeouts
TCPLossProbes: 8
TCPLossProbeRecovery: 2
21 DSACKs sent for old packets
8 DSACKs received
8 connections reset due to unexpected data
3 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackShiftFallback: 2
TCPRcvCoalesce: 2838
TCPOFOQueue: 136
TCPChallengeACK: 5
TCPSYNChallenge: 5
IpExt:
InNoRoutes: 1
InMcastPkts: 1852
OutMcastPkts: 1743
InBcastPkts: 32
OutBcastPkts: 30
InOctets: 3954225
OutOctets: 637037
InMcastOctets: 255393
OutMcastOctets: 203668
InBcastOctets: 4376
OutBcastOctets: 3900
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller [8086:8c49] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
03:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)
Subsystem: Bigfoot Networks, Inc. Device [1a56:2003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7d80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
04:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Subsystem: CLEVO/KAPOK Computer Device [1558:0655]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 5986:0400 Acer, Inc
Bus 003 Device 002: ID 0cf3:3004 Atheros Communications, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-amd64 is related to:
ii firmware-atheros 0.40
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-2-amd64/postinst/depmod-error-initrd-3.11-2-amd64: false
linux-image-3.11-2-amd64/prerm/removing-running-kernel-3.11-2-amd64: true
Reply to: