[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#723661: linux-image-3.2.0-4-amd64: e1000 driver TX hang error with debian 3.2 kernel



Package: src:linux
Version: 3.2.46-1+deb7u1
Severity: important
Tags: d-i

It appears there is an issue with the e1000 driver and this debian kernel.

I did not witness the system crashing, but if there is significant network traffic
then the Ethernet device "hangs" for a while, sometimes seconds, until it recovers
and a debug message starting with "Detected Tx Unit Hang" is printed to the console.

I believe the problem is caused by having over 4 GB of memory and can be fixed by 
compiling the e1000 driver version 8.0.35 from source however I could not get it
to compile with Linux 3.2.x kernel and it looks like support has been ended for that
driver and it is only now supported as part of the kernel.

With the source compiled version it lets you add an option "ignore_64bit_dma=1"
to the module which might fix the problem but I could not try it.

See: http://blog.bradiceanu.net/2010/11/28/netdev-watchdog-eth0-transmit-timed-out/

-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/rootgrp-rootvol ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    6.761553] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[    6.761554] [drm] Detected VRAM RAM=1024M, BAR=256M
[    6.761556] [drm] RAM width 64bits DDR
[    6.761563] [drm] radeon: 1024M of VRAM memory ready
[    6.761565] [drm] radeon: 512M of GTT memory ready.
[    6.761576] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.761578] [drm] Driver supports precise vblank timestamp query.
[    6.761608] radeon 0000:01:00.0: irq 58 for MSI/MSI-X
[    6.761612] radeon 0000:01:00.0: radeon: using MSI.
[    6.761634] [drm] radeon: irq initialized.
[    6.761636] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.761852] [drm] radeon: ib pool ready.
[    6.761907] [drm] Loading CEDAR Microcode
[    6.776862] platform radeon_cp.0: firmware: agent loaded radeon/CEDAR_pfp.bin into memory
[    6.784404] platform radeon_cp.0: firmware: agent loaded radeon/CEDAR_me.bin into memory
[    6.786539] platform radeon_cp.0: firmware: agent loaded radeon/CEDAR_rlc.bin into memory
[    7.338686] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    7.338787] radeon 0000:01:00.0: WB enabled
[    7.338789] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff880839fb0c00
[    7.355076] [drm] ring test on 0 succeeded in 1 usecs
[    7.355198] [drm] ib test on ring 0 succeeded in 0 usecs
[    7.355354] [drm] Radeon Display Connectors
[    7.355355] [drm] Connector 0:
[    7.355355] [drm]   HDMI-A
[    7.355356] [drm]   HPD4
[    7.355357] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    7.355358] [drm]   Encoders:
[    7.355359] [drm]     DFP1: INTERNAL_UNIPHY1
[    7.355360] [drm] Connector 1:
[    7.355361] [drm]   DVI-I
[    7.355361] [drm]   HPD1
[    7.355362] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    7.355363] [drm]   Encoders:
[    7.355364] [drm]     DFP2: INTERNAL_UNIPHY
[    7.355365] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.355366] [drm] Connector 2:
[    7.355366] [drm]   VGA
[    7.355367] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    7.355368] [drm]   Encoders:
[    7.355369] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    7.355394] [drm] Internal thermal controller without fan control
[    7.355414] [drm] radeon: power management initialized
[    7.392004] [drm] fb mappable at 0xC0142000
[    7.392005] [drm] vram apper at 0xC0000000
[    7.392006] [drm] size 5242880
[    7.392006] [drm] fb depth is 24
[    7.392007] [drm]    pitch is 5120
[    7.392120] fbcon: radeondrmfb (fb1) is primary device
[    7.392121] fbcon: Remapping primary device, fb1, to tty 1-63
[    8.062557] fb1: radeondrmfb frame buffer device
[    8.062561] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 1
[    8.062681] snd_hda_intel 0000:01:00.1: irq 59 for MSI/MSI-X
[    8.062706] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    8.086587] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    8.086789] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[    8.087312] hda_intel: Disabling MSI
[    8.087459] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[    8.893609] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.925580] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.957546] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.989516] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.005703] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input7
[    9.006017] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input8
[    9.006241] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input9
[    9.006508] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input10
[    9.671339] Adding 11708924k swap on /dev/md1.  Priority:-1 extents:1 across:11708924k 
[    9.681628] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    9.910340] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    9.988804] loop: module loaded
[   10.022134] w83627ehf: Found NCT6776F chip at 0xa30
[   13.301094] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   13.385895] kjournald starting.  Commit interval 5 seconds
[   13.399447] EXT3-fs (md0): using internal journal
[   13.399451] EXT3-fs (md0): mounted filesystem with ordered data mode
[   13.442238] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   13.494256] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   13.534317] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   13.554271] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   15.173631] ADDRCONF(NETDEV_UP): eth3: link is not ready
[   15.399146] RPC: Registered named UNIX socket transport module.
[   15.399148] RPC: Registered udp transport module.
[   15.399149] RPC: Registered tcp transport module.
[   15.399150] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.428243] FS-Cache: Loaded
[   15.448194] FS-Cache: Netfs 'nfs' registered for caching
[   15.468741] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.768927] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   17.872735] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   17.873355] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   17.886680] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.889536] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.997592] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.281193] igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   18.282069] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[   28.486382] eth3: no IPv6 routers present
[612448.081333] Netfilter messages via NETLINK v0.30.
[612448.235388] device eth0 entered promiscuous mode
[612475.212583] device eth0 left promiscuous mode
[612490.237895] device eth3 entered promiscuous mode
[612499.857615] device eth3 left promiscuous mode

** Model information
sys_vendor: Supermicro
product_name: X10SAE
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.00
board_vendor: Supermicro
board_name: X10SAE
board_version: 0123456789

** Loaded modules:
nfnetlink_log
nfnetlink
xt_multiport
iptable_filter
ip_tables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
jbd
w83627ehf
hwmon_vid
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
coretemp
radeon
nouveau
crc32c_intel
mxm_wmi
ghash_clmulni_intel
wmi
ttm
drm_kms_helper
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
aesni_intel
drm
aes_x86_64
aes_generic
cryptd
snd
power_supply
i2c_i801
i2c_algo_bit
acpi_cpufreq
mperf
soundcore
iTCO_wdt
psmouse
pcspkr
i2c_core
processor
iTCO_vendor_support
button
serio_raw
evdev
video
ext4
crc16
jbd2
mbcache
dm_mod
raid10
md_mod
sg
usbhid
sd_mod
hid
crc_t10dif
igb(O)
firewire_ohci
ahci
xhci_hcd
libahci
firewire_core
dca
libata
crc_itu_t
e1000
scsi_mod
thermal
fan
thermal_sys
ehci_hcd
usbcore
e1000e(O)
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface (nanuna.gi.alaska.edu)
# eth3 uses intel "igb" driver
allow-hotplug eth3
iface eth3 inet static
# did not work   hwaddress ether 00:e0:18:b5:55:fa
        # koya.gi.alaska.edu -- used for now until switch
	address 137.229.93.73
        ## nanuna.gi.alaska.edu
##	address 137.229.93.73
	netmask 255.255.255.0
	network 137.229.93.0
	broadcast 137.229.93.255
	gateway 137.229.93.1
	# dns-* options are implemented by the resolvconf package, if installed
	dns-nameservers 137.229.30.33 137.229.34.13 137.229.34.121
	dns-search gi.alaska.edu

# WE DO NOT WANT TO CONFIGURE ANY INTERFACES HERE EXCEPT eth3
# NetworkManager will automatically do DHCP for us! resulting in the DNS nanuna.iarc.uaf.edu
# Snorre 9/6/2013
#
# eth0 uses intel "e1000" driver
#auto eth0
#allow-hotplug eth0
#iface eth0 inet dhcp
#
# eth1 uses intel "e1000" driver
#auto eth1
#allow-hotplug eth1
#iface eth1 inet dhcp
#
# eth2 uses intel "e1000e" driver
#auto eth2
#allow-hotplug eth2
#iface eth2 inet dhcp

# original configuration using DHCP
# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:25:90:86:be:b5 brd ff:ff:ff:ff:ff:ff
    inet 137.229.93.73/24 brd 137.229.93.255 scope global eth3
    inet6 fe80::225:90ff:fe86:beb5/64 scope link 
       valid_lft forever preferred_lft forever
3: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:25:90:86:be:b4 brd ff:ff:ff:ff:ff:ff
4: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:07:e9:09:c7:e0 brd ff:ff:ff:ff:ff:ff
5: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 90:e2:ba:43:2b:13 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  eth3: 2402141083 22595549    0    0    0     0          0    209364 70035546251 47589246    0    0    0     0       0          0
    lo: 10651257   11970    0    0    0     0          0         0 10651257   11970    0    0    0     0       0          0
  eth2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    21667978 total packets received
    220 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    21667329 incoming packets delivered
    4040985 requests sent out
Icmp:
    446 ICMP messages received
    35 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 326
        timeout in transit: 2
        echo requests: 83
        echo replies: 35
    821 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 738
        echo replies: 83
IcmpMsg:
        InType0: 35
        InType3: 326
        InType8: 83
        InType11: 2
        OutType0: 83
        OutType3: 738
Tcp:
    1330 active connections openings
    6205 passive connection openings
    108 failed connection attempts
    123 connection resets received
    7 connections established
    19595966 segments received
    47569669 segments send out
    17443 segments retransmited
    3 bad segments received.
    3017 resets sent
Udp:
    6822 packets received
    722 packets to unknown port received.
    0 packet receive errors
    8228 packets sent
UdpLite:
TcpExt:
    153 invalid SYN cookies received
    101 resets received for embryonic SYN_RECV sockets
    1 packets pruned from receive queue because of socket buffer overrun
    2890 TCP sockets finished time wait in fast timer
    1 packets rejects in established connections because of timestamp
    4790 delayed acks sent
    2 delayed acks further delayed because of locked socket
    Quick ack mode was activated 118 times
    17243 packets directly queued to recvmsg prequeue.
    381033 bytes directly in process context from backlog
    17521558 bytes directly received in process context from prequeue
    301385 packet headers predicted
    12491 packets header predicted and directly queued to user
    1061620 acknowledgments not containing data payload received
    18172805 predicted acknowledgments
    3511 times recovered from packet loss by selective acknowledgements
    2 bad SACK blocks received
    Detected reordering 1 times using FACK
    Detected reordering 13 times using SACK
    Detected reordering 9 times using time stamp
    8 congestion windows fully recovered without slow start
    138 congestion windows partially recovered using Hoe heuristic
    8 congestion windows recovered without slow start by DSACK
    20 congestion windows recovered without slow start after partial ack
    732 TCP data loss events
    TCPLostRetransmit: 78
    66 timeouts after SACK recovery
    19 timeouts in loss state
    15432 fast retransmits
    489 forward retransmits
    343 retransmits in slow start
    656 other TCP timeouts
    92 SACK retransmits failed
    64 packets collapsed in receive queue due to low socket buffer
    139 DSACKs sent for old packets
    109 DSACKs received
    7 DSACKs for out of order packets received
    32 connections reset due to unexpected data
    6 connections reset due to early user close
    55 connections aborted due to timeout
    TCPDSACKIgnoredOld: 1
    TCPDSACKIgnoredNoUndo: 51
    TCPSpuriousRTOs: 1
    TCPSackShifted: 106274
    TCPSackMerged: 44463
    TCPSackShiftFallback: 12328
    TCPDeferAcceptDrop: 4733
    TCPChallengeACK: 75
    TCPSYNChallenge: 3
IpExt:
    InMcastPkts: 209250
    InBcastPkts: 1865160
    InOctets: 2041587207
    OutOctets: -1614491883
    InMcastOctets: 11133619
    InBcastOctets: 245222645


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM Controller [8086:0c08] (rev 06)
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Haswell PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: c0000000-d00fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:01.1 PCI bridge [0604]: Intel Corporation Haswell PCI Express x8 Controller [8086:0c05] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: a0000000-b30fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB xHCI Host Controller [8086:8c31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at b3120000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation Lynx Point MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b313c000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:16.3 Serial controller [0700]: Intel Corporation Lynx Point KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at f0a0 [size=8]
	Region 1: Memory at b313a000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
	Subsystem: Super Micro Computer Inc Device [15d9:153a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at b3100000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at b3139000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at f040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host Controller #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at b3138000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation Lynx Point High Definition Audio Controller [8086:8c20] (rev 04)
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 57
	Region 0: Memory at b3130000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: b3200000-b33fffff
	Prefetchable memory behind bridge: 00000000b3400000-00000000b35fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: d0500000-d05fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: d0400000-d04fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Memory behind bridge: d0300000-d03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation Lynx Point PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: d0200000-d02fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host Controller #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at b3137000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC Controller [8086:8c56] (rev 04)
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 47
	Region 0: I/O ports at f090 [size=8]
	Region 1: I/O ports at f080 [size=4]
	Region 2: I/O ports at f070 [size=8]
	Region 3: I/O ports at f060 [size=4]
	Region 4: I/O ports at f020 [size=32]
	Region 5: Memory at b3136000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus Controller [8086:8c22] (rev 04)
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at b3135000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f000 [size=32]
	Kernel driver in use: i801_smbus

00:1f.6 Signal processing controller [1180]: Intel Corporation Lynx Point Thermal Management Controller [8086:8c24] (rev 04)
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 5
	Region 0: Memory at b3134000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Robson CE [AMD Radeon HD 6300 Series] [1002:68e4] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited Device [174b:5450]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 58
	Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at d0020000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at e000 [size=256]
	Expansion ROM at d0000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon

01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
	Subsystem: PC Partner Limited Device [174b:aa68]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 59
	Region 0: Memory at d0040000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 8400 GS] [10de:10c3] (rev a2) (prog-if 00 [VGA controller])
	Subsystem: eVga.com. Corp. Device [3842:1300]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at d000 [size=128]
	Expansion ROM at b3000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

02:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
	Subsystem: eVga.com. Corp. Device [3842:1300]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 18
	Region 0: Memory at b3080000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
	Subsystem: Super Micro Computer Inc Device [15d9:1533]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at c000 [size=32]
	Region 3: Memory at d0580000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: igb

05:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: d0400000-d04fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

06:00.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
	Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:002e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d04a0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at d0480000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at b040 [size=64]
	Expansion ROM at d0460000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: e1000

06:01.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
	Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d0440000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at d0420000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at b000 [size=64]
	Expansion ROM at d0400000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: e1000

06:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d04c4000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at d04c0000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

07:00.0 USB controller [0c03]: Renesas Technology Corp. Device [1912:0015] (rev 02) (prog-if 30 [XHCI])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d0300000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

08:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
	Subsystem: Super Micro Computer Inc Device [15d9:0805]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 56
	Region 0: I/O ports at a050 [size=8]
	Region 1: I/O ports at a040 [size=4]
	Region 2: I/O ports at a030 [size=8]
	Region 3: I/O ports at a020 [size=4]
	Region 4: I/O ports at a000 [size=32]
	Region 5: Memory at d0200000 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>
	Kernel driver in use: ahci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 003 Device 002: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard


-- System Information:
Debian Release: 7.1
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn  firmware-linux-free  <none>

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u1
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.36+wheezy.1
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:


Reply to: