Bug#722263: linux-image-3.2.0-4-amd64: efivarfs is not supported by the Debian kernel.
Package: src:linux
Version: 3.2.46-1+deb7u1
Severity: important
Dear Maintainer,
we are trying to setup Debin Linux in a UEFI Secure Boot environment
using our own keying material.
To be able to write to the UEFI Secure Boot nvram from Linux we need
support for the efivarfs. Unfortunately this is not supported
on Debian Linux:
grep CONFIG_EFIVAR_FS config-<version>-amd64
# CONFIG_EFIVAR_FS is not set
All tools to introduce new keys, certificates and hashes, like the
mokutil and the sbsigntools, require this filesystem.
Please consider supporting the EFIVARFS since it should not create any
conflict with other options.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=f83184a4-df3a-4d5b-ba5b-62f200bafcdd ro quiet
** Not tainted
** Kernel log:
[ 0.614150] mousedev: PS/2 mouse device common for all mice
[ 0.614332] rtc_cmos 00:02: RTC can wake from S4
[ 0.615043] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.615218] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.615486] rtc0: alarms up to one day, 114 bytes nvram
[ 0.615499] cpuidle: using governor ladder
[ 0.615501] cpuidle: using governor menu
[ 0.615786] TCP cubic registered
[ 0.616112] NET: Registered protocol family 10
[ 0.616898] Mobile IPv6
[ 0.616901] NET: Registered protocol family 17
[ 0.616915] Registering the dns_resolver key type
[ 0.617101] PM: Hibernation image not present or could not be loaded.
[ 0.617121] registered taskstats version 1
[ 0.617778] rtc_cmos 00:02: setting system clock to 2013-09-09
11:43:18 UTC (1378726998)
[ 0.617834] Initializing network drop monitor service
[ 0.619435] Freeing unused kernel memory: 576k freed
[ 0.619699] Write protecting the kernel read-only data: 6144k
[ 0.624080] Freeing unused kernel memory: 652k freed
[ 0.628386] Freeing unused kernel memory: 688k freed
[ 0.729559] udevd[56]: starting version 175
[ 0.787669] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.787752] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.794380] usbcore: registered new interface driver usbfs
[ 0.794415] usbcore: registered new interface driver hub
[ 0.800200] SCSI subsystem initialized
[ 0.802281] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.802336] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.803029] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.803073] virtio-pci 0000:00:06.0: setting latency timer to 64
[ 0.806490] usbcore: registered new device driver usb
[ 0.808876] libata version 3.00 loaded.
[ 0.810809] ata_piix 0000:00:01.1: version 2.13
[ 0.811071] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.811592] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.812137] scsi0 : ata_piix
[ 0.813546] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.814801] scsi1 : ata_piix
[ 0.814881] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.814887] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.826060] ata1: port disabled--ignoring
[ 0.827586] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 0.827610] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.827656] uhci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[ 0.827835] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c080
[ 0.827958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.827961] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.827963] usb usb1: Product: UHCI Host Controller
[ 0.827965] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.827967] usb usb1: SerialNumber: 0000:00:01.2
[ 0.828204] hub 1-0:1.0: USB hub found
[ 0.828214] hub 1-0:1.0: 2 ports detected
[ 0.886885] FDC 0 is a S82078B
[ 0.890601] virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X
[ 0.890636] virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X
[ 0.890674] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.900495] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
[ 0.900526] virtio-pci 0000:00:05.0: irq 44 for MSI/MSI-X
[ 0.906305] vda: vda1 vda2 vda3
[ 0.980998] ata2.01: NODEV after polling detection
[ 0.981623] ata2.00: ATAPI: QEMU DVD-ROM, 1.1.2, max UDMA/100
[ 0.982612] ata2.00: configured for MWDMA2
[ 0.983819] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM
1.1. PQ: 0 ANSI: 5
[ 1.006437] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.006442] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.006688] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.030030] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.140073] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 1.453034] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 1.453053] usb 1-1: New USB device strings: Mfr=1, Product=3,
SerialNumber=5
[ 1.453057] usb 1-1: Product: QEMU USB Tablet
[ 1.453060] usb 1-1: Manufacturer: QEMU 1.1.2
[ 1.453062] usb 1-1: SerialNumber: 42
[ 1.496537] input: QEMU 1.1.2 QEMU USB Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input1
[ 1.497071] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID
v0.01 Pointer [QEMU 1.1.2 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.497214] usbcore: registered new interface driver usbhid
[ 1.497217] usbhid: USB HID core driver
[ 1.762769] PM: Starting manual resume from disk
[ 1.762782] PM: Hibernation image partition 254:3 present
[ 1.762784] PM: Looking for hibernation image.
[ 1.763013] PM: Image not found (code -22)
[ 1.763017] PM: Hibernation image not present or could not be loaded.
[ 1.803151] EXT4-fs (vda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.889134] udevd[302]: starting version 175
[ 3.178210] WARNING! power/level is deprecated; use power/control instead
[ 3.187289] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.187299] ACPI: Power Button [PWRF]
[ 3.229431] piix4_smbus 0000:00:01.3: SMBus Host Controller at
0xb100, revision 0
[ 3.254995] parport_pc 00:0b: reported by Plug and Play ACPI
[ 3.318518] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.339507] EFI Variables Facility v0.08 2004-May-17
[ 3.390518] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.434272] snd_hda_intel 0000:00:04.0: irq 45 for MSI/MSI-X
[ 3.439401] snd_hda_intel 0000:00:04.0: setting latency timer to 64
[ 4.090437] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 4.758650] Adding 1044476k swap on /dev/vda3. Priority:-1 extents:1
across:1044476k
[ 4.881382] EXT4-fs (vda2): re-mounted. Opts: (null)
[ 5.157655] EXT4-fs (vda2): re-mounted. Opts: errors=remount-ro
[ 5.322917] loop: module loaded
[ 8.374805] FAT-fs (vda1): utf8 is not a recommended IO charset for
FAT filesystems, filesystem will be case sensitive!
** Model information
not available
** Loaded modules:
nls_utf8
nls_cp437
vfat
fat
loop
snd_hda_intel
snd_hda_codec
psmouse
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
efivars
serio_raw
joydev
evdev
virtio_balloon
snd
pcspkr
soundcore
parport_pc
parport
i2c_piix4
i2c_core
button
ext4
crc16
jbd2
mbcache
usbhid
hid
sg
sr_mod
cdrom
ata_generic
virtio_blk
virtio_net
floppy
uhci_hcd
ehci_hcd
ata_piix
libata
scsi_mod
usbcore
usb_common
virtio_pci
virtio_ring
virtio
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC
[Natoma] [8086:1237] (rev 02)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA
[Natoma/Triton II] [8086:7000]
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
Region 4: I/O ports at c0a0 [size=16]
Kernel driver in use: ata_piix
00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at c080 [size=32]
Kernel driver in use: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113] (rev 03)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446
[1013:00b8] (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 80000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at 82006000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 40000000 [disabled] [size=64K]
00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device
[1af4:1000]
Subsystem: Red Hat, Inc Device [1af4:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c060 [size=32]
Region 1: Memory at 82005000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 40010000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:04.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) High Definition Audio Controller [8086:2668] (rev 01)
Subsystem: Red Hat, Inc Device [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 82000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4161
Kernel driver in use: snd_hda_intel
00:05.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device
[1af4:1001]
Subsystem: Red Hat, Inc Device [1af4:0002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=64]
Region 1: Memory at 82004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
00:06.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon
[1af4:1002]
Subsystem: Red Hat, Inc Device [1af4:0005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c040 [size=32]
Kernel driver in use: virtio-pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: