Bug#722062: linux-image-3.10-2-amd64: Please enable CONFIG_SENSORS_JC42=m and CONFIG_SENSORS_NCT6775=m
Package: src:linux
Version: 3.10.7-1
Severity: wishlist
Dear Maintainer,
New C226-based SuperMicro X10SAE motherboards use Nuvoton NCT6775
super-I/O chips and JC42 sensors for DIMMs; it would be great if the
kernel included the appropriate modules!
Thanks,
Stephen
-- Package-specific info:
** Version:
Linux version 3.10-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.7-1 (2013-08-17)
** Command line:
BOOT_IMAGE=/vmlinuz-3.10-2-amd64 root=/dev/mapper/vg--fast-root ro quiet
** Not tainted
** Kernel log:
[ 5.887445] IR MCE Keyboard/mouse protocol handler initialized
[ 5.887665] lirc_dev: IR Remote Control driver registered, major 246
[ 5.887922] cx88[0]/0: registered device video1 [v4l2]
[ 5.887939] cx88[0]/0: registered device vbi0
[ 5.887956] cx88[0]/0: registered device radio0
[ 5.888010] cx88[0]/2: cx2388x 8802 Driver Manager
[ 5.888080] cx88[0]/2: found at 0000:04:00.2, rev: 5, irq: 17, latency: 32, mmio: 0xf1000000
[ 5.888220] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 5.888224] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 5.888226] IR LIRC bridge handler initialized
[ 5.891957] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 5.891959] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 5.891960] cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
[ 5.891961] cx88[0]/2: cx2388x based DVB/ATSC card
[ 5.891962] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 5.897921] tuner-simple 10-0061: attaching existing instance
[ 5.897922] tuner-simple 10-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 5.902246] DVB: registering new adapter (cx88[0])
[ 5.902248] cx88-mpeg driver manager 0000:04:00.2: DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[ 5.916494] usbcore: registered new interface driver snd-usb-audio
[ 5.985582] fbcon: inteldrmfb (fb0) is primary device
[ 6.171296] Console: switching to colour frame buffer device 240x75
[ 6.188466] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.188471] i915 0000:00:02.0: registered panic notifier
[ 6.189641] i915 0000:00:02.0: More than 8 outputs detected
[ 6.706785] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.706982] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.707239] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.707710] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[ 6.719966] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 6.720056] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 6.720114] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 6.720626] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 6.720796] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 6.720943] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 6.721681] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[ 6.733733] hda_codec: ALC1150: SKU not ready 0x00000000
[ 6.736963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 6.746012] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 6.746225] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 6.746391] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 6.746537] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 6.746682] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 6.746818] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 6.746983] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 7.223339] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 7.346322] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.480842] fuse init (API version 7.22)
[ 7.541744] loop: module loaded
[ 7.832836] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7.983533] Adding 1959924k swap on /dev/mapper/cswap2. Priority:-1 extents:1 across:1959924k
[ 13.412897] kjournald starting. Commit interval 5 seconds
[ 13.454595] EXT3-fs (md4): using internal journal
[ 13.454604] EXT3-fs (md4): mounted filesystem with ordered data mode
[ 13.457980] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.460409] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.489411] kjournald starting. Commit interval 5 seconds
[ 13.546670] EXT3-fs (dm-3): using internal journal
[ 13.546681] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 13.596057] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: user_xattr
[ 13.621500] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 14.593040] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.517717] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 15.518041] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.781305] RPC: Registered named UNIX socket transport module.
[ 24.781308] RPC: Registered udp transport module.
[ 24.781309] RPC: Registered tcp transport module.
[ 24.781310] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.783382] FS-Cache: Loaded
[ 24.783700] Key type dns_resolver registered
[ 24.787302] FS-Cache: Netfs 'nfs' registered for caching
[ 24.791585] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.806898] NFS: Registering the id_resolver key type
[ 24.806905] Key type id_resolver registered
[ 24.806906] Key type id_legacy registered
[ 39.831031] RPC: AUTH_GSS upcall timed out.
[ 39.831031] Please check user daemon is running.
[ 40.778313] Bluetooth: RFCOMM TTY layer initialized
[ 40.778323] Bluetooth: RFCOMM socket layer initialized
[ 40.778325] Bluetooth: RFCOMM ver 1.11
[ 40.784381] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.784384] Bluetooth: BNEP filters: protocol multicast
[ 40.784400] Bluetooth: BNEP socket layer initialized
[ 40.825507] lp: driver loaded but no devices found
[ 40.828844] ppdev: user-space parallel port driver
[ 40.844323] Netfilter messages via NETLINK v0.30.
[ 40.888754] device eth0 entered promiscuous mode
[ 74.160187] usb 1-13: new low-speed USB device number 10 using xhci_hcd
[ 74.180339] usb 1-13: New USB device found, idVendor=046d, idProduct=c058
[ 74.180350] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 74.180356] usb 1-13: Product: USB Optical Mouse
[ 74.180360] usb 1-13: Manufacturer: Logitech
[ 74.180677] usb 1-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 74.208989] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/input/input20
[ 74.209458] hid-generic 0003:046D:C058.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13/input0
[ 113.178385] logitech-djreceiver 0003:046D:C52B.0005: logi_dj_recv_destroy_djhid_device: can't destroy a NULL device
[ 122.948236] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0005/input/input21
[ 122.948965] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-2:1
[ 127.389173] usb 1-13: USB disconnect, device number 10
[ 631.539670] i2c /dev entries driver
** Model information
sys_vendor: Supermicro
product_name: X10SAE
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.00.T201302271759
board_vendor: Supermicro
board_name: X10SAE
board_version: 0123456789
** Loaded modules:
hid_generic
nfnetlink_queue
nfnetlink_log
nfnetlink
parport_pc
ppdev
lp
parport
bnep
rfcomm
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cuse
binfmt_misc
rpcsec_gss_krb5
nfsv4
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext3
jbd
sha256_generic
tcp_diag
inet_diag
autofs4
loop
joydev
grip
ns558
gameport
hwmon_vid
fuse
dm_crypt
snd_hda_codec_realtek
snd_hda_codec_hdmi
cx22702
cx88_dvb
cx88_vp3054_i2c
videobuf_dvb
dvb_core
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
ir_rc6_decoder
ir_rc5_decoder
ir_jvc_decoder
ir_nec_decoder
snd_usb_audio
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
rc_hauppauge
tuner_simple
tuner_types
tuner
serport
iTCO_wdt
iTCO_vendor_support
usblp
pwc
evdev
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
snd_hda_intel
snd_hda_codec
coretemp
cx88_alsa
snd_hwdep
snd_pcm
kvm_intel
snd_page_alloc
snd_seq
kvm
snd_seq_device
snd_timer
cx8802
cx8800
cx88xx
snd
btusb
btcx_risc
tveeprom
videobuf_dma_sg
rc_core
bluetooth
v4l2_common
videodev
rfkill
soundcore
media
microcode
videobuf_core
i915
psmouse
serio_raw
pcspkr
i2c_i801
lpc_ich
mei_me
mfd_core
mei
acpi_cpufreq
mperf
video
processor
button
ext4
crc16
jbd2
mbcache
dm_mod
raid1
md_mod
radeon
drm_kms_helper
ttm
drm
sg
sr_mod
cdrom
sd_mod
crc_t10dif
hid_logitech_dj
hid_logitech
ff_memless
usbhid
hid
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
firewire_ohci
ata_generic
firewire_core
crc_itu_t
aic7xxx
ahci
scsi_transport_spi
libahci
libata
igb
ehci_pci
dca
ehci_hcd
i2c_algo_bit
xhci_hcd
i2c_core
scsi_mod
e1000e
usbcore
ptp
pps_core
usb_common
fan
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3 Processor Integrated Graphics Controller [8086:041a] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 60
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 61
Region 0: Memory at f4c34000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f4c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f4c40000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.2 IDE interface [0101]: Intel Corporation 8 Series/C220 Series Chipset Family IDE-r Controller [8086:8c3c] (rev 04) (prog-if 85 [Master SecO PriO])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at f130 [size=8]
Region 1: I/O ports at f120 [size=4]
Region 2: I/O ports at f110 [size=8]
Region 3: I/O ports at f100 [size=4]
Region 4: I/O ports at f0f0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at f4c3e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:153a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f4c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f4c3d000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4c3c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 62
Region 0: Memory at f4c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: bfb00000-bfcfffff
Prefetchable memory behind bridge: 00000000bfd00000-00000000bfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f4800000-f49fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f0000000-f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f4b00000-f4bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f4a00000-f4afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f4c3b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation C226 Series Chipset Family Server Advanced SKU LPC Controller [8086:8c56] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 57
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f4c3a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4c39000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 04)
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 0: Memory at f4c38000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at f4900000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
03:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f0000000-f40fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
04:00.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
04:00.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
04:00.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
04:01.0 SCSI storage controller [0100]: Adaptec AIC-7892B U160/m [9005:0081] (rev 02)
Subsystem: Adaptec 19160 Ultra160 SCSI Controller [9005:62a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
BIST result: 00
Region 0: I/O ports at d000 [disabled] [size=256]
Region 1: Memory at f4025000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
04:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4024000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f4020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
05:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
06:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0805]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 58
Region 0: I/O ports at c050 [size=8]
Region 1: I/O ports at c040 [size=4]
Region 2: I/O ports at c030 [size=8]
Region 3: I/O ports at c020 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at f4a00000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 006 Device 002: ID 8087:8000 Intel Corp.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 8087:8008 Intel Corp.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
Bus 001 Device 009: ID 050d:0131 Belkin Components Bluetooth Device with trace filter
Bus 001 Device 008: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
Bus 001 Device 007: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 001 Device 004: ID 03f0:2f24 Hewlett-Packard LP2475w Monitor Hub
Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 006: ID 03eb:6124 Atmel Corp. at91sam SAMBA bootloader
Bus 001 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (200, 'unstable'), (1, 'experimental')
Architecture: i386 (x86_64)
Foreign Architectures: amd64
Kernel: Linux 3.10-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-2-amd64 recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-92+b1
Versions of packages linux-image-3.10-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-2-amd64/postinst/missing-firmware-3.10-2-amd64:
linux-image-3.10-2-amd64/postinst/depmod-error-initrd-3.10-2-amd64: false
linux-image-3.10-2-amd64/prerm/removing-running-kernel-3.10-2-amd64: true
linux-image-3.10-2-amd64/postinst/ignoring-ramdisk:
Reply to: