Bug#711453: linux-image-3.9-1-amd64: system completely locks up during boot or after minimal usage
Package: src:linux
Version: 3.9.4-1
Severity: important
Dear Maintainer,
The system locks up hard either during boot or after brief usage (< 1 min).
I was able to log in to XFCE once, and another time it froze while lightdm was
displayed. Whatever was displayed on the screen at the time remains, but the
system is totally unresponsive and I cannot switch ttys once the freeze sets
in. Sometimes it stays like this longer than I care to wait, others the system
will reboot itself.
This bug seems similar and possibly related to #711143.
-- Package-specific info:
** Kernel log: boot messages should be attached
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.9.4-1
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/condor-root ro single
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf681fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf682000-0x00000000bf6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf75afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf75b000-0x00000000bf7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7e2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7e3000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Envy 15 Notebook PC/7009, BIOS F.2B 10/12/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-combining
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 100000000 mask F80000000 write-back
[ 0.000000] 5 base 180000000 mask FC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0185a000, 0x0185afff] PGTABLE
[ 0.000000] BRK [0x0185b000, 0x0185bfff] PGTABLE
[ 0.000000] BRK [0x0185c000, 0x0185cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[ 0.000000] [mem 0x1bfe00000-0x1bfffffff] page 2M
[ 0.000000] BRK [0x0185d000, 0x0185dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[ 0.000000] [mem 0x1bc000000-0x1bfdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[ 0.000000] [mem 0x180000000-0x1bbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf681fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf681fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf6bf000-0xbf75afff]
[ 0.000000] [mem 0xbf6bf000-0xbf75afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7bf000-0xbf7e2fff]
[ 0.000000] [mem 0xbf7bf000-0xbf7e2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] BRK [0x0185e000, 0x0185efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x365d8000-0x372e3fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bf7fe120 0009C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000bf7ed000 0B1C0 (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000bf76e000 00040
[ 0.000000] ACPI: ASF! 00000000bf7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000bf7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000bf7ec000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7eb000 0073D (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bf7ea000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 00000000bf7e9000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000bf7e8000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bf7e7000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: SPCR 00000000bf7e6000 00050 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013)
[ 0.000000] ACPI: ASPT 00000000bf7e5000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DMAR 00000000bf7e4000 00060 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
[ 0.000000] NODE_DATA [mem 0x1bfff8000-0x1bfffbfff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xbf681fff]
[ 0.000000] node 0: [mem 0xbf6bf000-0xbf75afff]
[ 0.000000] node 0: [mem 0xbf7bf000-0xbf7e2fff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1bfffffff]
[ 0.000000] On node 0 totalpages: 1570525
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10666 pages used for memmap
[ 0.000000] DMA32 zone: 780099 pages, LIFO batch:31
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 786432 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf682000 - 00000000bf6bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf75b000 - 00000000bf7bf000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e3000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
[ 0.000000] PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s84800 r8192 d21696 u262144
[ 0.000000] pcpu-alloc: s84800 r8192 d21696 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1549030
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/condor-root ro single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6106836k/7340032k available (3683k kernel code, 1057932k absent, 175264k reserved, 3071k data, 884k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1596.034 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.06 BogoMIPS (lpj=6384136)
[ 0.000213] pid_max: default: 32768 minimum: 301
[ 0.000354] Security Framework initialized
[ 0.000457] AppArmor: AppArmor disabled by boot time parameter
[ 0.000558] Yama: becoming mindful.
[ 0.001326] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003809] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004899] Mount-cache hash table entries: 256
[ 0.005231] Initializing cgroup subsys cpuacct
[ 0.005333] Initializing cgroup subsys memory
[ 0.005447] Initializing cgroup subsys devices
[ 0.005543] Initializing cgroup subsys freezer
[ 0.005643] Initializing cgroup subsys net_cls
[ 0.005740] Initializing cgroup subsys blkio
[ 0.005840] Initializing cgroup subsys perf_event
[ 0.005969] CPU: Physical Processor ID: 0
[ 0.006068] CPU: Processor Core ID: 0
[ 0.006167] mce: CPU supports 9 MCE banks
[ 0.006277] CPU0: Thermal monitoring enabled (TM1)
[ 0.006381] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.006381] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.006381] tlb_flushall_shift: 6
[ 0.006573] Freeing SMP alternatives: 12k freed
[ 0.007093] ACPI: Core revision 20130117
[ 0.020974] ACPI: All ACPI Tables successfully acquired
[ 0.035051] dmar: Host address width 36
[ 0.035154] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.035260] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020a2
[ 0.035363] dmar: RMRR base: 0x000000bde20000 end: 0x000000bde40fff
[ 0.036024] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075828] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz (fam: 06, model: 1e, stepping: 05)
[ 0.184288] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.184768] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.184869] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.184966] ... version: 3
[ 0.185681] ... bit width: 48
[ 0.185781] ... generic registers: 4
[ 0.185880] ... value mask: 0000ffffffffffff
[ 0.185975] ... max period: 000000007fffffff
[ 0.186075] ... fixed-purpose events: 3
[ 0.186173] ... event mask: 000000070000000f
[ 0.200531] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186660] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.281135] Brought up 8 CPUs
[ 0.281239] smpboot: Total of 8 processors activated (25536.54 BogoMIPS)
[ 0.287534] devtmpfs: initialized
[ 0.292081] PM: Registering ACPI NVS region [mem 0xbf75b000-0xbf7befff] (409600 bytes)
[ 0.292358] regulator-dummy: no parameters
[ 0.292553] NET: Registered protocol family 16
[ 0.292808] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.292908] ACPI: bus type PCI registered
[ 0.293106] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.293207] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.314607] PCI: Using configuration type 1 for base access
[ 0.315852] bio: create slab <bio-0> at 0
[ 0.316070] ACPI: Added _OSI(Module Device)
[ 0.316168] ACPI: Added _OSI(Processor Device)
[ 0.316270] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.316373] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.319287] ACPI: EC: Look up EC in DSDT
[ 0.321831] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.327327] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.334171] ACPI: SSDT 00000000bf691a98 002DA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.335106] ACPI: Dynamic OEM Table Load:
[ 0.335392] ACPI: SSDT (null) 002DA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.335871] ACPI: SSDT 00000000bf690618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.336775] ACPI: Dynamic OEM Table Load:
[ 0.337062] ACPI: SSDT (null) 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.337845] ACPI: SSDT 00000000bf691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.338849] ACPI: Dynamic OEM Table Load:
[ 0.339139] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.339619] ACPI: SSDT 00000000bf68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.340577] ACPI: Dynamic OEM Table Load:
[ 0.340865] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.346626] ACPI: Interpreter enabled
[ 0.346738] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.347035] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.347346] ACPI: (supports S0 S3 S4 S5)
[ 0.347443] ACPI: Using IOAPIC for interrupt routing
[ 0.347594] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.361062] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.361224] \_SB_.PCI0:_OSC invalid UUID
[ 0.361226] _OSC request data:1 8 0
[ 0.362282] PCI host bridge to bus 0000:00
[ 0.362383] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.362483] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.362581] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.362684] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.362784] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.362893] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[ 0.363045] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.363105] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.363219] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.363352] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.363486] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.363633] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.363791] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.363925] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.364095] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.364126] pci 0000:00:1b.0: reg 10: [mem 0xd4100000-0xd4103fff 64bit]
[ 0.364218] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.364327] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.364426] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.364480] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.364640] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.364738] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.364794] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.364957] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.365321] pci 0000:00:1d.0: reg 10: [mem 0xd4105800-0xd4105bff]
[ 0.367356] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.367425] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.367580] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.367674] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.367831] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
[ 0.368034] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.368064] pci 0000:00:1f.2: reg 10: [io 0x5048-0x504f]
[ 0.368078] pci 0000:00:1f.2: reg 14: [io 0x5054-0x5057]
[ 0.368092] pci 0000:00:1f.2: reg 18: [io 0x5040-0x5047]
[ 0.368106] pci 0000:00:1f.2: reg 1c: [io 0x5050-0x5053]
[ 0.368120] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 0.368134] pci 0000:00:1f.2: reg 24: [mem 0xd4105000-0xd41057ff]
[ 0.368199] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.368325] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.368352] pci 0000:00:1f.3: reg 10: [mem 0xd4105c00-0xd4105cff 64bit]
[ 0.368379] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.368524] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.368558] pci 0000:00:1f.6: reg 10: [mem 0xd4104000-0xd4104fff 64bit]
[ 0.368809] pci 0000:01:00.0: [1002:94a0] type 00 class 0x030000
[ 0.368822] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.368831] pci 0000:01:00.0: reg 14: [io 0x4000-0x40ff]
[ 0.368841] pci 0000:01:00.0: reg 18: [mem 0xd4000000-0xd400ffff]
[ 0.368869] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.368907] pci 0000:01:00.0: supports D1 D2
[ 0.368972] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[ 0.368985] pci 0000:01:00.1: reg 10: [mem 0xd4010000-0xd4013fff]
[ 0.369059] pci 0000:01:00.1: supports D1 D2
[ 0.379697] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.379807] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.379811] pci 0000:00:03.0: bridge window [mem 0xd4000000-0xd40fffff]
[ 0.379818] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.380145] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
[ 0.380407] pci 0000:02:00.0: reg 10: [mem 0xd3000000-0xd3001fff 64bit]
[ 0.381695] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.381951] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.382240] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.382346] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.382356] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff]
[ 0.382367] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.382472] pci 0000:03:00.0: [1969:1063] type 00 class 0x020000
[ 0.382505] pci 0000:03:00.0: reg 10: [mem 0xd2000000-0xd203ffff 64bit]
[ 0.382523] pci 0000:03:00.0: reg 18: [io 0x2000-0x207f]
[ 0.382646] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.382708] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.391735] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.391845] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.391854] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.391866] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.391965] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.392075] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.392078] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.392082] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.392085] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.392178] \_SB_.PCI0:_OSC invalid UUID
[ 0.392180] _OSC request data:1 1f 0
[ 0.392185] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.392285] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.393490] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.394807] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.396232] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.397736] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.399060] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.400477] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.401811] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.403230] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.404873] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.405027] PCI host bridge to bus 0000:ff
[ 0.405131] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.405234] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[ 0.405298] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[ 0.405363] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[ 0.405423] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[ 0.405486] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[ 0.405545] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[ 0.405605] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.405665] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.405724] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.405785] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.405849] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.405910] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.405968] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.406026] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[ 0.406087] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[ 0.406160] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.406259] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.406817] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.406874] acpi root: \_SB_.CPBG notify handler is installed
[ 0.406893] Found 2 acpi root devices
[ 0.406951] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.407534] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.407723] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.407829] vgaarb: loaded
[ 0.407930] vgaarb: bridge control possible 0000:01:00.0
[ 0.408078] PCI: Using ACPI for IRQ routing
[ 0.414884] PCI: pci_cache_line_size set to 64 bytes
[ 0.415035] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
[ 0.415038] e820: reserve RAM buffer [mem 0xbf682000-0xbfffffff]
[ 0.415041] e820: reserve RAM buffer [mem 0xbf75b000-0xbfffffff]
[ 0.415043] e820: reserve RAM buffer [mem 0xbf7e3000-0xbfffffff]
[ 0.415045] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.415235] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.415344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.416298] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.418463] hpet: hpet2 irq 40 for MSI
[ 0.418532] hpet: hpet3 irq 41 for MSI
[ 0.418609] hpet: hpet4 irq 42 for MSI
[ 0.418670] hpet: hpet5 irq 43 for MSI
[ 0.418743] hpet: hpet6 irq 44 for MSI
[ 0.418859] Switching to clocksource hpet
[ 0.421325] pnp: PnP ACPI init
[ 0.421436] ACPI: bus type PNP registered
[ 0.422501] pnp 00:00: [dma 4]
[ 0.422542] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.422580] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.422806] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.422857] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.422932] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.423056] system 00:04: [io 0x0800-0x080f] has been reserved
[ 0.423155] system 00:04: [io 0xffff] has been reserved
[ 0.423254] system 00:04: [io 0xffff] has been reserved
[ 0.423352] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.423453] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.423552] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.423655] system 00:04: [io 0x0380-0x038e] has been reserved
[ 0.423758] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423804] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.423859] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.423925] pnp 00:07: Plug and Play ACPI device, IDs SYN1e0d SYN1e00 SYN0002 PNP0f13 (active)
[ 0.424089] pnp 00:08: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.424457] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.424563] system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.424661] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.424760] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.424859] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.424962] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.425062] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.425160] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.425260] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.425667] pnp: PnP ACPI: found 10 devices
[ 0.425768] ACPI: bus type PNP unregistered
[ 0.433736] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.433887] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4020000-0xd403ffff pref]
[ 0.433988] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.434089] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.434189] pci 0000:00:03.0: bridge window [mem 0xd4000000-0xd40fffff]
[ 0.434288] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.434390] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.434489] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.434592] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff]
[ 0.434693] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.434797] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.434902] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.435025] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.435128] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.435234] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.435669] pci 0000:00:1e.0: setting latency timer to 64
[ 0.435679] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.435683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.435686] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.435689] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.435692] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.435695] pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd40fffff]
[ 0.435698] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.435702] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.435705] pci_bus 0000:02: resource 1 [mem 0xd3000000-0xd3ffffff]
[ 0.435708] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.435711] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.435714] pci_bus 0000:03: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 0.435718] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.435721] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.435724] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.435727] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.435730] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.435854] NET: Registered protocol family 2
[ 0.436317] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.436939] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.437467] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.437586] TCP: reno registered
[ 0.437704] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.437890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.438186] NET: Registered protocol family 1
[ 0.451210] pci 0000:01:00.0: Boot video device
[ 0.451272] PCI: CLS 64 bytes, default 64
[ 0.451319] Unpacking initramfs...
[ 0.823069] Freeing initrd memory: 13360k freed
[ 0.825539] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.825645] software IO TLB [mem 0xbb682000-0xbf682000] (64MB) mapped at [ffff8800bb682000-ffff8800bf681fff]
[ 0.825795] Simple Boot Flag at 0x44 set to 0x1
[ 0.826585] audit: initializing netlink socket (disabled)
[ 0.826706] type=2000 audit(1370505565.712:1): initialized
[ 0.848279] bounce pool size: 64 pages
[ 0.848386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.849245] VFS: Disk quotas dquot_6.5.2
[ 0.849384] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.849596] msgmni has been set to 11953
[ 0.849997] alg: No test for stdrng (krng)
[ 0.850136] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.850285] io scheduler noop registered
[ 0.850387] io scheduler deadline registered
[ 0.850522] io scheduler cfq registered (default)
[ 0.850883] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.851619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.851719] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.851953] acpiphp_glue: can't evaluate _ADR (0x5)
[ 0.852268] intel_idle: MWAIT substates: 0x1120
[ 0.852286] intel_idle: v0.4 model 0x1E
[ 0.852288] intel_idle: lapic_timer_reliable_states 0x2
[ 0.852418] GHES: HEST is not enabled!
[ 0.852591] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.853440] Linux agpgart interface v0.103
[ 0.853735] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.870462] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.870569] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.870827] mousedev: PS/2 mouse device common for all mice
[ 0.871550] rtc_cmos 00:05: RTC can wake from S4
[ 0.871809] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.871950] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.872286] cpuidle: using governor ladder
[ 0.872679] cpuidle: using governor menu
[ 0.872824] drop_monitor: Initializing network drop monitor service
[ 0.873022] TCP: cubic registered
[ 0.873320] NET: Registered protocol family 10
[ 0.873748] mip6: Mobile IPv6
[ 0.873948] NET: Registered protocol family 17
[ 0.874621] PM: Hibernation image not present or could not be loaded.
[ 0.874629] registered taskstats version 1
[ 0.876483] rtc_cmos 00:05: setting system clock to 2013-06-06 07:59:26 UTC (1370505566)
[ 0.877811] Freeing unused kernel memory: 884k freed
[ 0.878029] Write protecting the kernel read-only data: 6144k
[ 0.879700] Freeing unused kernel memory: 404k freed
[ 0.881331] Freeing unused kernel memory: 520k freed
[ 0.889965] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.944543] udevd[95]: starting version 175
[ 0.962534] SCSI subsystem initialized
[ 0.963635] ACPI: bus type USB registered
[ 0.963796] usbcore: registered new interface driver usbfs
[ 0.963920] usbcore: registered new interface driver hub
[ 0.968894] usbcore: registered new device driver usb
[ 0.969584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.969944] ehci-pci: EHCI PCI platform driver
[ 0.970278] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.970289] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.970409] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.970548] ehci-pci 0000:00:1d.0: debug port 2
[ 0.970684] ACPI: bus type ATA registered
[ 0.974664] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.975928] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4105800
[ 0.981468] libata version 3.00 loaded.
[ 0.987391] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.987536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.987645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.987756] usb usb1: Product: EHCI Host Controller
[ 0.987869] usb usb1: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
[ 0.987977] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.991814] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[ 0.994886] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x4
[ 0.995031] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 0.995165] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x4
[ 0.995720] microcode: CPU0 updated to revision 0x5, date = 2011-09-01
[ 0.995852] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x4
[ 0.995982] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 0.996109] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x4
[ 0.996571] microcode: CPU1 updated to revision 0x5, date = 2011-09-01
[ 0.996692] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x4
[ 0.996825] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 0.996950] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x4
[ 0.997408] microcode: CPU2 updated to revision 0x5, date = 2011-09-01
[ 0.997540] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x4
[ 0.997679] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 0.997803] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x4
[ 0.998266] microcode: CPU3 updated to revision 0x5, date = 2011-09-01
[ 0.998388] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x4
[ 0.998525] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 0.998653] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x4
[ 0.999122] microcode: CPU4 updated to revision 0x5, date = 2011-09-01
[ 0.999245] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x4
[ 0.999463] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 0.999620] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x4
[ 1.000099] microcode: CPU5 updated to revision 0x5, date = 2011-09-01
[ 1.000242] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x4
[ 1.000400] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 1.000423] hub 1-0:1.0: USB hub found
[ 1.000431] hub 1-0:1.0: 2 ports detected
[ 1.000764] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x4
[ 1.001211] microcode: CPU6 updated to revision 0x5, date = 2011-09-01
[ 1.001353] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x4
[ 1.001492] platform microcode: firmware: agent loaded intel-ucode/06-1e-05 into memory
[ 1.001644] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x4
[ 1.001790] ahci 0000:00:1f.2: version 3.0
[ 1.002106] microcode: CPU7 updated to revision 0x5, date = 2011-09-01
[ 1.002288] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.002293] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.002442] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl RAID mode
[ 1.002576] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.002699] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.004075] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.004189] ACPI: Thermal Zone [TZ01] (58 C)
[ 1.016361] scsi0 : ahci
[ 1.016679] scsi1 : ahci
[ 1.016910] scsi2 : ahci
[ 1.017183] scsi3 : ahci
[ 1.017489] scsi4 : ahci
[ 1.017761] scsi5 : ahci
[ 1.017938] ata1: SATA max UDMA/133 abar m2048@0xd4105000 port 0xd4105100 irq 45
[ 1.018048] ata2: SATA max UDMA/133 abar m2048@0xd4105000 port 0xd4105180 irq 45
[ 1.018150] ata3: DUMMY
[ 1.018249] ata4: DUMMY
[ 1.018349] ata5: DUMMY
[ 1.018450] ata6: SATA max UDMA/133 abar m2048@0xd4105000 port 0xd4105380 irq 45
[ 1.311947] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.335922] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.336058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.337407] ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
[ 1.337519] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.339134] ata1.00: configured for UDMA/100
[ 1.339642] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5
[ 1.339699] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.345105] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.345395] sd 0:0:0:0: [sda] Write Protect is off
[ 1.345505] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.345606] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.411155] sda: sda1 sda2 < sda5 >
[ 1.412835] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.414803] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.444227] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.444321] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.445041] hub 1-1:1.0: USB hub found
[ 1.445319] hub 1-1:1.0: 8 ports detected
[ 1.643023] device-mapper: uevent: version 1.0.3
[ 1.643248] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 1.716118] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.752765] bio: create slab <bio-1> at 1
[ 1.820002] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0159
[ 1.820090] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.820179] usb 1-1.3: Product: USB2.0-CRW
[ 1.820256] usb 1-1.3: Manufacturer: Generic
[ 1.820341] usb 1-1.3: SerialNumber: 20071114173400000
[ 1.823928] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 1.824002] Switching to clocksource tsc
[ 1.827928] Initializing USB Mass Storage driver...
[ 1.828056] usbcore: registered new interface driver usb-storage
[ 1.828131] USB Mass Storage support registered.
[ 1.839697] scsi6 : usb-storage 1-1.3:1.0
[ 1.840026] usbcore: registered new interface driver ums-realtek
[ 1.896134] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.992018] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b16c
[ 1.992120] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.992209] usb 1-1.5: Product: HP Webcam
[ 1.992299] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.843613] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.844226] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 3.629370] sd 6:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
[ 3.630618] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.630628] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.631870] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3.631878] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.636276] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3.636279] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.664940] sdb: sdb1
[ 3.668520] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3.668523] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.668526] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 15.618017] PM: Starting manual resume from disk
[ 15.618121] PM: Hibernation image partition 254:3 present
[ 15.618122] PM: Looking for hibernation image.
[ 15.618586] PM: Image not found (code -22)
[ 15.618591] PM: Hibernation image not present or could not be loaded.
[ 15.696364] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 18.172163] udevd[523]: starting version 175
[ 20.800198] acpi device:26: registered as cooling_device0
[ 20.804356] acpi device:28: registered as cooling_device1
[ 20.804491] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.804660] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input1
[ 20.811988] wmi: Mapper loaded
[ 20.833107] intel ips 0000:00:1f.6: Non-IPS CPU detected.
[ 20.833210] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 20.934823] ACPI: Requesting acpi_cpufreq
[ 21.066135] input: HP WMI hotkeys as /devices/virtual/input/input2
[ 21.073073] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 21.073225] ACPI: Power Button [PWRB]
[ 21.073393] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 21.074796] ACPI: Lid Switch [LID0]
[ 21.075159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 21.075310] ACPI: Power Button [PWRF]
[ 21.090579] ACPI: Battery Slot [BAT0] (battery present)
[ 21.090950] ACPI: Battery Slot [BAT1] (battery absent)
[ 21.116609] ACPI: AC Adapter [ACAD] (on-line)
[ 21.134394] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 21.194627] hp_accel: laptop model unknown, using default axes configuration
[ 21.195338] lis3lv02d: 8 bits sensor found
[ 21.235999] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 21.254265] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 21.254557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.296409] EDAC MC: Ver: 3.0.0
[ 21.408790] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[ 21.428528] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 21.428842] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.IEIT.SGPE 2 (20130117/utaddress-251)
[ 21.429146] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.429252] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 21.429552] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.429655] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 21.429952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.430054] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 21.430352] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.430456] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 21.448948] iTCO_vendor_support: vendor-support=0
[ 21.452665] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 21.452787] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
[ 21.453061] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.559099] cfg80211: Calling CRDA to update world regulatory domain
[ 21.944401] [drm] Initialized drm 1.1.0 20060810
[ 22.134991] media: Linux media interface: v0.10
[ 22.384790] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 22.384909] Copyright(c) 2003-2013 Intel Corporation
[ 22.385877] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[ 22.397404] Linux video capture interface: v2.00
[ 22.490859] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 623809
[ 22.511923] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b16c)
[ 22.513384] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
[ 22.513546] usbcore: registered new interface driver uvcvideo
[ 22.513631] USB Video Class driver (1.1.1)
[ 22.563825] [drm] radeon kernel modesetting enabled.
[ 22.564301] [drm] initializing kernel modesetting (RV740 0x1002:0x94A0 0x103C:0x7009).
[ 22.564441] [drm] register mmio base: 0xD4000000
[ 22.564471] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 22.564665] [drm] register mmio size: 65536
[ 22.564888] ATOM BIOS: BR35781.001
[ 22.565028] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 22.565132] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 22.570017] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 22.570126] [drm] RAM width 128bits DDR
[ 22.570290] [TTM] Zone kernel: Available graphics memory: 3061008 kiB
[ 22.570398] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 22.570505] [TTM] Initializing pool allocator
[ 22.570620] [TTM] Initializing DMA pool allocator
[ 22.570745] [drm] radeon: 1024M of VRAM memory ready
[ 22.570847] [drm] radeon: 512M of GTT memory ready.
[ 22.570966] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 22.571066] [drm] Driver supports precise vblank timestamp query.
[ 22.571212] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[ 22.571224] radeon 0000:01:00.0: radeon: using MSI.
[ 22.571357] [drm] radeon: irq initialized.
[ 22.571449] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 22.572469] [drm] probing gen 2 caps for device 8086:d138 = 3393082/0
[ 22.572572] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 22.572760] [drm] Loading RV730 Microcode
[ 22.676013] platform radeon_cp.0: firmware: agent loaded radeon/RV730_pfp.bin into memory
[ 22.683104] platform radeon_cp.0: firmware: agent loaded radeon/RV730_me.bin into memory
[ 22.688978] platform radeon_cp.0: firmware: agent loaded radeon/R700_rlc.bin into memory
[ 22.719070] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 22.719344] radeon 0000:01:00.0: WB enabled
[ 22.719500] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801b6ff7c00
[ 22.719668] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8801b6ff7c0c
[ 22.735476] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 22.766832] [drm] ring test on 0 succeeded in 0 usecs
[ 22.767038] [drm] ring test on 3 succeeded in 1 usecs
[ 22.767499] [drm] ib test on ring 0 succeeded in 0 usecs
[ 22.767708] [drm] ib test on ring 3 succeeded in 0 usecs
[ 22.768097] [drm] Radeon Display Connectors
[ 22.768261] [drm] Connector 0:
[ 22.768405] [drm] LVDS-1
[ 22.768583] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[ 22.768723] [drm] Encoders:
[ 22.768936] [drm] LCD1: INTERNAL_UNIPHY2
[ 22.769130] [drm] Connector 1:
[ 22.769283] [drm] HDMI-A-1
[ 22.769413] [drm] HPD1
[ 22.769557] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 22.769707] [drm] Encoders:
[ 22.769840] [drm] DFP1: INTERNAL_UNIPHY
[ 22.770084] [drm] Internal thermal controller with fan control
[ 22.770286] [drm] radeon: power management initialized
[ 22.902653] cfg80211: World regulatory domain updated:
[ 22.902807] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.902980] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.903175] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.903328] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.903468] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.903628] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.997045] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 22.997547] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 23.023299] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-5000-5.ucode into memory
[ 23.023441] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
[ 23.210022] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 23.210169] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 23.210332] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 23.210460] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 23.210609] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
[ 23.210756] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 23.211035] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 23.246873] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 23.295102] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 23.764459] [drm] fb mappable at 0xC0142000
[ 23.764633] [drm] vram apper at 0xC0000000
[ 23.764788] [drm] size 8294400
[ 23.764923] [drm] fb depth is 24
[ 23.765047] [drm] pitch is 7680
[ 23.765366] fbcon: radeondrmfb (fb0) is primary device
[ 24.438704] Console: switching to colour frame buffer device 240x67
[ 24.460167] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 24.460261] radeon 0000:01:00.0: registered panic notifier
[ 24.460433] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0
[ 24.460784] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 24.461037] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 24.480462] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input11
[ 26.814245] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 27.042743] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 27.962297] fuse init (API version 7.21)
[ 28.007719] loop: module loaded
[ 28.474306] Adding 12556284k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:12556284k
[ 29.006122] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 29.048367] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 29.741404] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.852692] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 30.041690] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 50.906893] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 58.415741] lp: driver loaded but no devices found
[ 58.658408] ppdev: user-space parallel port driver
[ 60.775656] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 60.778856] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 60.979678] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 60.982950] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 61.118167] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 61.136476] atl1c 0000:03:00.0: irq 50 for MSI/MSI-X
[ 61.136591] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 64.828618] Ebtables v2.0 registered
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Envy 15 Notebook PC
product_version: 0394100000241910001420000
chassis_vendor: Quanta
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.2B
board_vendor: Quanta
board_name: 7009
board_version: 36.35
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d132] (rev 11)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d4000000-d40fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Subsystem: Device [003c:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Subsystem: Device [003c:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Subsystem: Device [003c:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Subsystem: Device [003c:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d3000000-d3ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2000000-d2ffffff
Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4105800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b03] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 5048 [size=8]
Region 1: I/O ports at 5054 [size=4]
Region 2: I/O ports at 5040 [size=8]
Region 3: I/O ports at 5050 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at d4105000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at d4105c00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d4104000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV740/M97 [Mobility Radeon HD 4830] [1002:94a0] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d4020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38]
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 49
Region 0: Memory at d4010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d3000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8131 Gigabit Ethernet [1969:1063] (rev c0)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c52] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:7009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0bda:0159 Realtek Semiconductor Corp. RTS5159 Card Reader Controller
Bus 001 Device 004: ID 04f2:b16c Chicony Electronics Co., Ltd
Bus 001 Device 008: ID 0461:4d03 Primax Electronics, Ltd Kensington Mouse-in-a-box
Bus 001 Device 009: ID 0bc2:3300 Seagate RSS LLC
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'testing'), (600, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 0.38
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.38
ii firmware-realtek 0.38
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
Reply to: