[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#711342: linux-image-3.10-rc4-amd64: does not include f2fs filesystem support



Package: src:linux
Version: 3.10~rc4-1~exp1
Severity: normal

Since kernel 3.8 a new 'f2fs' filesystem is included in the Linux kernel.
The Debian image for 3.14-rc4 is missing this filesystem.

Please include it: it is usefull for e.g. external SSD harddrives connected via USB which don't support TRIM and also for SD-cards and such.

-- Package-specific info:
** Version:
Linux version 3.10-rc4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.10~rc4-1~exp1 (2013-06-03)

** Command line:
BOOT_IMAGE=/vmlinuz-3.10-rc4-amd64 root=/dev/mapper/VGPEGASUS-LVOS ro quiet

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[   20.639886] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   20.640746] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900103e0000, irq=17
[   20.820581] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[   21.035475] Console: switching to colour frame buffer device 128x37
[   21.042586] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   21.042592] i915 0000:00:02.0: registered panic notifier
[   21.056895] acpi device:2c: registered as cooling_device4
[   21.057018] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   21.057264] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   21.057593] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   21.057844] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   21.057869] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.IELK.GPSE 2 (20130328/utaddress-251)
[   21.057885] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.057896] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130328/utaddress-251)
[   21.057911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.057919] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20130328/utaddress-251)
[   21.057932] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.057937] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   21.150667] iTCO_vendor_support: vendor-support=0
[   21.399780] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   21.399872] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[   21.400760] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   21.524051] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[   21.685682] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   21.970226] input: HDA Intel Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   22.153204] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   22.593495] media: Linux media interface: v0.10
[   23.092451] Linux video capture interface: v2.00
[   23.362722] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[   23.381627] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb5/5-6/5-6:1.0/input/input10
[   23.381917] usbcore: registered new interface driver uvcvideo
[   23.381924] USB Video Class driver (1.1.1)
[   23.775625] cfg80211: World regulatory domain updated:
[   23.775636] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.775645] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.775652] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.775659] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.775667] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.775674] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   26.065747] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   26.442589] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[   26.732915] loop: module loaded
[   26.840992] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.056688] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   29.950655] Adding 3997692k swap on /dev/mapper/VGPEGASUS-LVSWAP.  Priority:-1 extents:1 across:3997692k 
[   30.785431] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   30.894047] EXT4-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
[   30.895345] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   34.485694] RPC: Registered named UNIX socket transport module.
[   34.485702] RPC: Registered udp transport module.
[   34.485707] RPC: Registered tcp transport module.
[   34.485711] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   34.593563] Key type dns_resolver registered
[   34.625840] FS-Cache: Loaded
[   34.709364] FS-Cache: Netfs 'nfs' registered for caching
[   34.833153] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   35.397518] fuse init (API version 7.22)
[   40.907920] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[   44.182371] tun: Universal TUN/TAP device driver, 1.6
[   44.182379] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   46.844424] Bluetooth: Core ver 2.16
[   46.844500] NET: Registered protocol family 31
[   46.844507] Bluetooth: HCI device and connection manager initialized
[   46.844540] Bluetooth: HCI socket layer initialized
[   46.844556] Bluetooth: L2CAP socket layer initialized
[   46.844589] Bluetooth: SCO socket layer initialized
[   46.956957] Bluetooth: RFCOMM TTY layer initialized
[   46.957004] Bluetooth: RFCOMM socket layer initialized
[   46.957011] Bluetooth: RFCOMM ver 1.11
[   46.994407] lp: driver loaded but no devices found
[   47.004584] ppdev: user-space parallel port driver
[   47.535250] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   47.535261] Bluetooth: BNEP filters: protocol multicast
[   47.535289] Bluetooth: BNEP socket layer initialized
[   50.752217] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   50.774476] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[   50.789776] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   50.859852] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   50.861099] zram: Created 1 device(s) ...
[   50.878329] zram: There is little point creating a zram of greater than twice the size of memory since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the size of the disk when not in use so a huge zram is wasteful.
[   50.878329] 	Memory Size: 2051004 kB
[   50.878329] 	Size you selected: 4194304 kB
[   50.878329] Continuing anyway ...
[   50.958804] Adding 4194300k swap on /dev/zram0.  Priority:5 extents:1 across:4194300k SS
[   52.142456] composite sync not supported
[   52.188690] composite sync not supported
[   53.531212] wlan0: authenticate with 00:22:3f:89:18:6c
[   53.551384] wlan0: send auth to 00:22:3f:89:18:6c (try 1/3)
[   53.553402] wlan0: authenticated
[   53.556128] wlan0: associate with 00:22:3f:89:18:6c (try 1/3)
[   53.558980] wlan0: RX AssocResp from 00:22:3f:89:18:6c (capab=0x411 status=0 aid=6)
[   53.559182] wlan0: associated
[   53.559215] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.744373] composite sync not supported
[   59.355196] composite sync not supported
[   92.041659] composite sync not supported
[   99.907531] composite sync not supported
[  116.201145] composite sync not supported
[  228.477569] ata1.00: configured for UDMA/133
[  228.477593] ata1: EH complete

** Model information
sys_vendor: ASUSTeK Computer INC.
product_name: 1015PX
product_version: x.x
chassis_vendor: ASUSTeK Computer INC.
chassis_version: x.x
bios_vendor: American Megatrends Inc.
bios_version: 1101   
board_vendor: ASUSTeK Computer INC.
board_name: 1015PE
board_version: x.xx

** Loaded modules:
zram(C)
bnep
parport_pc
ppdev
lp
rfcomm
parport
bluetooth
tun
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
binfmt_misc
uinput
fuse
nfsd
nfs_acl
auth_rpcgss
oid_registry
nfs
fscache
dns_resolver
lockd
sunrpc
ext2
nf_nat_irc
nf_conntrack_irc
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
ip_tables
x_tables
loop
uvcvideo
videobuf2_core
videodev
media
videobuf2_vmalloc
videobuf2_memops
joydev
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
iTCO_wdt
coretemp
snd_pcm
kvm_intel
iTCO_vendor_support
lpc_ich
kvm
snd_seq
snd_timer
mfd_core
arc4
ath9k
snd_seq_device
mac80211
i915
ath9k_common
ath9k_hw
drm_kms_helper
drm
ath
cfg80211
snd
eeepc_wmi
asus_wmi
soundcore
snd_page_alloc
i2c_algo_bit
i2c_core
sparse_keymap
evdev
rfkill
psmouse
pcspkr
serio_raw
microcode
wmi
acpi_cpufreq
mperf
processor
video
battery
ac
button
ext4
jbd2
mbcache
crc16
sha256_generic
cbc
dm_crypt
md_mod
nbd
dm_mirror
dm_region_hash
dm_log
dm_mod
usb_storage
sg
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
ehci_pci
thermal
thermal_sys
atl1c
uhci_hcd
ehci_hcd
usbcore
usb_common

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether f4:6d:04:8a:55:3b brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether e0:b9:a5:02:35:bf brd ff:ff:ff:ff:ff:ff
    inet 192.168.48.6/24 brd 192.168.48.255 scope global wlan0
       valid_lft forever preferred_lft forever
    inet6 fe80::e2b9:a5ff:fe02:35bf/64 scope link 
       valid_lft forever preferred_lft forever
4: fvh: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500
    link/ether 0a:21:ff:0d:ed:54 brd ff:ff:ff:ff:ff:ff
    inet 172.29.0.22/24 brd 172.29.0.255 scope global fvh
       valid_lft forever preferred_lft forever
    inet6 fe80::821:ffff:fe0d:ed54/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
   fvh: 22456852  441195    0 3283    0     0          0         0    36310     279    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo:   65596     161    0    0    0     0          0         0    65596     161    0    0    0     0       0          0
 wlan0: 48354250  444163    0    0    0     0          0         0 55172472  442310    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    519922 total packets received
    0 forwarded
    0 incoming packets discarded
    512861 incoming packets delivered
    442835 requests sent out
    122 outgoing packets dropped
    78 dropped because of missing route
    106 fragments failed
Icmp:
    146 ICMP messages received
    3 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 144
        echo replies: 2
    137 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 135
        echo request: 2
IcmpMsg:
        InType0: 2
        InType3: 144
        OutType3: 135
        OutType8: 2
Tcp:
    65 active connections openings
    1 passive connection openings
    6 failed connection attempts
    0 connection resets received
    10 connections established
    2552 segments received
    1984 segments send out
    35 segments retransmited
    1 bad segments received.
    11 resets sent
Udp:
    502409 packets received
    24 packets to unknown port received.
    0 packet receive errors
    440568 packets sent
UdpLite:
TcpExt:
    35 TCP sockets finished time wait in fast timer
    73 delayed acks sent
    Quick ack mode was activated 4 times
    1 packets directly queued to recvmsg prequeue.
    1436 packet headers predicted
    298 acknowledgments not containing data payload received
    246 predicted acknowledgments
    1 times recovered from packet loss by selective acknowledgements
    1 congestion windows recovered without slow start after partial ack
    1 fast retransmits
    8 other TCP timeouts
    TCPLossProbes: 1
    TCPLossProbeRecovery: 1
    4 DSACKs sent for old packets
    1 DSACKs received
    4 connections aborted due to timeout
    TCPSackShiftFallback: 4
    TCPRcvCoalesce: 1025
    TCPOFOQueue: 4
    TCPChallengeACK: 1
    TCPSYNChallenge: 1
    TCPSpuriousRtxHostQueues: 3
IpExt:
    InNoRoutes: 1
    InMcastPkts: 56825
    OutMcastPkts: 53
    InBcastPkts: 11335
    OutBcastPkts: 54
    InOctets: 48021887
    OutOctets: 40385471
    InMcastOctets: 4125279
    OutMcastOctets: 7993
    InBcastOctets: 703344
    OutBcastOctets: 49444


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at dc00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8437]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 80000000-801fffff
	Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f8000000-fbffffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: f7f00000-f7ffffff
	Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at d400 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at d480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at d880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 43
	Region 0: I/O ports at d080 [size=8]
	Region 1: I/O ports at d000 [size=4]
	Region 2: I/O ports at cc00 [size=8]
	Region 3: I/O ports at c880 [size=4]
	Region 4: I/O ports at c800 [size=32]
	Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at ec00 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: atl1c

02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
	Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k


** USB devices:
Bus 005 Device 002: ID 13fe:5000 Kingston Technology Company Inc. 
Bus 005 Device 003: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 7.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.10-rc4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.10-rc4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.112
ii  linux-base                              3.5
ii  module-init-tools                       3.16-1

Versions of packages linux-image-3.10-rc4-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.10-rc4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27
pn  linux-doc-3.10          <none>

Versions of packages linux-image-3.10-rc4-amd64 is related to:
ii  firmware-atheros        0.38
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.10-rc4-amd64/postinst/missing-firmware-3.10-rc4-amd64:
  linux-image-3.10-rc4-amd64/postinst/depmod-error-initrd-3.10-rc4-amd64: false
  linux-image-3.10-rc4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.10-rc4-amd64/prerm/removing-running-kernel-3.10-rc4-amd64: true


Reply to: