Your message dated Thu, 6 Jun 2013 00:14:58 +0200 with message-id <20130605221458.GG5444@pisco.westfalen.local> and subject line Closing has caused the Debian Bug report #584239, regarding ACPI Error: ACPI path has too many parent prefixes to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 584239: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584239 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: ACPI Error: ACPI path has too many parent prefixes
- From: Anton Kochkov <anton.kochkov@gmail.com>
- Date: Wed, 02 Jun 2010 19:19:00 +0400
- Message-id: <20100602151900.8377.15239.reportbug@XLaptop>
Package: linux-2.6 Version: 2.6.32-15 Severity: normal Tags: sid I have laptop Dell Vostro V13: Caption: Dell Vostro V13 Product Link: http://www.dell.com/us/en/business/note ... =bsd&cs=04 Board Vendor: Dell Inc. Board name: 0R45H1 CPU: Intel® Celeron 743 (1.2GHz, 1MB L2 cache) (Ultra Low Voltage) Chipset: Mobile Intel® GS45 Express Chipset ICH9M-Enhanced Graphics: Intel Graphics Media Accelerator (GMA) 4500MHD Northbridge: GS45-GMHC Southbridge: ICH9M-E Motion Sensor: STM DE351DL Super I/O chip: ITE IT8502E Embedded controller chip: ITE IT8502E Flash chip: Winbond 25Q16BVSIG I'll provide this info, if this can help to improve Debian on this hardware. I always see this ACPI errors in dmesg: Code: Select all [ 0.084001] ACPI Error: ACPI path has too many parent prefixes (^) - reached beyond root node (20090903/nsaccess-429) [ 0.084001] ACPI Error (psargs-0359): [^LPCB.EC0_.LANW] Namespace lookup failure, AE_NOT_FOUND [ 0.084001] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14edd50), AE_NOT_FOUND And also some additional outputs This laptop use ITE IT8502e embedded controller (acpi) (8032 uC, which 8051-compatible) It's base = 0x68E This is reverse engineered part of EC code Code: Select all ROM:4AC7 ___PREDEFINED BASE ADRESS___ ROM:4AC7 ROM:4AC7 000 mov DPTR, #SWUC_SWCBALR ; // Set SWC BASE ADDRESS to "0x68E" ROM:4ACA 000 mov A, #8Eh ; // so the ports adresses are now this (from host view): ROM:4ACC 000 movx @DPTR, A ; // ROM:4ACD 000 mov DPTR, #SWUC_SWCBAHR ; // Adress Port = 0x68Eh ROM:4AD0 000 mov A, #6 ; // Date Port = 0x68Fh ROM:4AD2 000 movx @DPTR, A ; } ROM:4AD2 ROM:4AD2 ___PREDEFINED BASE ADRESS___ and this is bios information: # biosdecode 2.10 SMBIOS 2.5 present. Structure Table Length: 1988 bytes Structure Table Address: 0x000DC010 Number Of Structures: 51 Maximum Structure Size: 199 bytes ACPI 2.0 present. OEM Identifier: PTLTD RSD Table 32-bit Address: 0x7DBF93A4 XSD Table 64-bit Address: 0x000000007DBF9408 BIOS32 Service Directory present. Revision: 0 Calling Interface Address: 0x000FDBC0 PNP BIOS 1.0 present. Event Notification: Not Supported Real Mode 16-bit Code Address: E1FD:008B Real Mode 16-bit Data Address: 0040:0000 16-bit Protected Mode Code Address: 0x000F832E 16-bit Protected Mode Data Address: 0x00000400 This bug also posted on debian forum: http://forums.debian.net/viewtopic.php?f=7&t=52437 All files attachments here -- Package-specific info: ** Version: Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 05:38:08 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686-bigmem root=/dev/mapper/XLaptop-root ro quiet ** Not tainted ** Kernel log: [ 14.761932] ACPI: EC: input buffer is not empty, aborting transaction [ 14.809480] cfg80211: Using static regulatory domain info [ 14.809485] cfg80211: Regulatory domain: US [ 14.809487] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.809492] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 14.809496] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809499] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809503] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809507] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809511] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 15.335520] ACPI: EC: input buffer is not empty, aborting transaction [ 15.335599] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 15.335613] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 15.335663] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 15.497250] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input8 [ 15.497523] a4tech 0003:09DA:000A.0001: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1/input0 [ 15.560843] Linux video capture interface: v2.00 [ 15.647471] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.647479] i915 0000:00:02.0: setting latency timer to 64 [ 15.674242] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (064e:8106) [ 15.676591] i915 0000:00:02.0: irq 31 for MSI/MSI-X [ 15.676601] [drm] set up 31M of stolen space [ 15.803957] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9 [ 15.804044] usbcore: registered new interface driver uvcvideo [ 15.804048] USB Video Class driver (v0.1.0) [ 16.633198] ACPI: EC: input buffer is not empty, aborting transaction [ 17.157774] ACPI: EC: input buffer is not empty, aborting transaction [ 17.157853] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 17.157869] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 17.157924] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 17.421593] usb 3-1.3: new full speed USB device using uhci_hcd and address 5 [ 17.553630] usb 3-1.3: New USB device found, idVendor=413c, idProduct=8160 [ 17.553635] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 17.553639] usb 3-1.3: Product: Dell Wireless 365 Bluetooth Module [ 17.553642] usb 3-1.3: Manufacturer: Dell Computer Corp [ 17.553802] usb 3-1.3: configuration #1 chosen from 1 choice [ 17.644487] Bluetooth: Core ver 2.15 [ 17.644546] NET: Registered protocol family 31 [ 17.644548] Bluetooth: HCI device and connection manager initialized [ 17.644551] Bluetooth: HCI socket layer initialized [ 17.687209] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 17.687435] usbcore: registered new interface driver btusb [ 18.217666] Console: switching to colour frame buffer device 170x48 [ 18.217689] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 18.217704] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 18.217756] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 18.227842] fb0: inteldrmfb frame buffer device [ 18.227845] registered panic notifier [ 18.229239] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 18.230574] acpi device:02: registered as cooling_device1 [ 18.231580] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 18.231706] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.231987] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.232061] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 18.232133] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.763290] ACPI: EC: input buffer is not empty, aborting transaction [ 18.763373] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 18.763388] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 18.763443] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 18.909201] cfg80211: Calling CRDA for country: US [ 19.047688] hda_codec: ALC269: BIOS auto-probing. [ 19.050406] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 19.248744] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 19.398589] phy0: Selected rate control algorithm 'minstrel' [ 19.399415] Registered led device: b43-phy0::tx [ 19.399437] Registered led device: b43-phy0::rx [ 19.399457] Registered led device: b43-phy0::radio [ 19.399529] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 22.413175] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input12 [ 23.115742] loop: module loaded [ 23.798025] Adding 5963768k swap on /dev/mapper/XLaptop-swap_1. Priority:-1 extents:1 across:5963768k [ 24.404747] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 25.945924] r8169: eth0: link up [ 25.945942] r8169: eth0: link up [ 26.042127] fuse init (API version 7.13) [ 27.250749] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 29.572235] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 29.688474] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw [ 29.710716] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw [ 29.868294] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 35.389982] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.394591] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 35.397160] b43-phy0 ERROR: This device does not support DMA on your system. Please use PIO instead. [ 35.399743] b43-phy0: Controller RESET (DMA error) ... [ 35.628252] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 35.957598] apm: BIOS not found. [ 36.327919] Bluetooth: L2CAP ver 2.14 [ 36.327923] Bluetooth: L2CAP socket layer initialized [ 36.407259] Bluetooth: RFCOMM TTY layer initialized [ 36.407265] Bluetooth: RFCOMM socket layer initialized [ 36.407268] Bluetooth: RFCOMM ver 1.11 [ 36.482556] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.482560] Bluetooth: BNEP filters: protocol multicast [ 36.639402] Bridge firewalling registered [ 36.828029] eth0: no IPv6 routers present [ 37.650464] lp: driver loaded but no devices found [ 37.681158] ppdev: user-space parallel port driver [ 41.341046] b43-phy0: Controller restarted [ 41.384102] Bluetooth: SCO (Voice Link) ver 0.6 [ 41.384106] Bluetooth: SCO socket layer initialized ** Model information not available ** Loaded modules: Module Size Used by sco 5857 2 cpufreq_powersave 602 0 cpufreq_userspace 1480 0 cpufreq_stats 1940 0 cpufreq_conservative 4018 0 ppdev 4058 0 lp 5570 0 parport 22554 2 ppdev,lp bridge 32987 0 stp 996 1 bridge bnep 7444 2 rfcomm 25167 5 l2cap 21705 14 bnep,rfcomm uinput 4796 1 fuse 43758 1 ext2 46293 1 coretemp 3281 0 loop 9757 0 arc4 974 0 ecb 1405 0 rng_core 2178 0 snd_hda_codec_realtek 163214 1 mac80211 123258 0 btusb 8001 2 bluetooth 36327 9 sco,bnep,rfcomm,l2cap,btusb snd_hda_intel 16787 0 snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 4054 1 snd_hda_codec snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47370 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 3576 0 uvcvideo 45254 0 snd_rawmidi 12505 1 snd_seq_midi i915 220464 2 videodev 25545 1 uvcvideo snd_seq_midi_event 3684 1 snd_seq_midi v4l1_compat 10250 2 uvcvideo,videodev hid_a4tech 1452 0 snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event drm_kms_helper 18305 1 i915 dell_laptop 1533 0 cfg80211 87605 1 mac80211 snd_timer 12258 2 snd_pcm,snd_seq drm 112628 3 i915,drm_kms_helper snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq rfkill 10264 4 bluetooth,dell_laptop,cfg80211 snd 34363 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 3450 1 snd i2c_i801 6466 0 i2c_algo_bit 3497 1 i915 tpm_tis 5572 0 snd_page_alloc 5113 2 snd_hda_intel,snd_pcm dcdbas 3940 1 dell_laptop i2c_core 12696 6 i915,videodev,drm_kms_helper,drm,i2c_i801,i2c_algo_bit tpm 8137 1 tpm_tis video 14605 1 i915 led_class 1757 0 output 1204 1 video battery 3782 0 ac 1640 0 serio_raw 2916 0 pcspkr 1207 0 evdev 5609 27 psmouse 44653 0 tpm_bios 3569 1 tpm processor 26607 1 button 3598 1 i915 ext4 254973 2 mbcache 3762 2 ext2,ext4 jbd2 56091 1 ext4 crc16 1027 2 l2cap,ext4 sha256_generic 10748 2 aes_i586 6816 2 aes_generic 25738 1 aes_i586 cbc 2047 1 usbhid 28028 0 hid 50629 2 hid_a4tech,usbhid dm_crypt 9127 1 dm_mod 46090 12 dm_crypt sd_mod 25869 3 crc_t10dif 1012 1 sd_mod ssb 33666 0 ahci 27262 3 mmc_core 38515 1 ssb uhci_hcd 16141 0 libata 115973 1 ahci thermal 9206 0 pcmcia 17534 1 ssb thermal_sys 9378 3 video,processor,thermal scsi_mod 101405 2 sd_mod,libata r8169 25028 0 mii 2714 1 r8169 ehci_hcd 28175 0 pcmcia_core 20482 2 ssb,pcmcia usbcore 98742 6 btusb,uvcvideo,usbhid,uhci_hcd,ehci_hcd nls_base 4541 1 usbcore ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:26:6c:10:22:6f brd ff:ff:ff:ff:ff:ff inet 192.168.1.4/24 brd 192.168.1.255 scope global eth0 inet6 fe80::226:6cff:fe10:226f/64 scope link valid_lft forever preferred_lft forever 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:e6:f3:05:45:55 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 6440 92 0 0 0 0 0 0 6440 92 0 0 0 0 0 0 eth0:1168632908 6262411 0 0 0 0 0 0 817395302 6823394 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 6261923 total packets received 6 with invalid headers 2 with invalid addresses 0 forwarded 0 incoming packets discarded 6261647 incoming packets delivered 6822925 requests sent out 414 reassemblies required 207 packets reassembled ok Icmp: 8940 ICMP messages received 216 input ICMP message failed. ICMP input histogram: destination unreachable: 7500 timeout in transit: 1421 source quenches: 17 echo replies: 2 6 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 4 echo request: 2 IcmpMsg: InType0: 2 InType3: 7500 InType4: 17 InType11: 1421 OutType3: 4 OutType8: 2 Tcp: 114517 active connections openings 22 passive connection openings 58479 failed connection attempts 919 connection resets received 7 connections established 6220994 segments received 6377347 segments send out 373152 segments retransmited 0 bad segments received. 977 resets sent Udp: 31396 packets received 4 packets to unknown port received. 0 packet receive errors 72504 packets sent UdpLite: TcpExt: 212 ICMP packets dropped because they were out-of-window 3534 TCP sockets finished time wait in fast timer 21 packets rejects in established connections because of timestamp 28769 delayed acks sent 10 delayed acks further delayed because of locked socket Quick ack mode was activated 89400 times 26 packets directly queued to recvmsg prequeue. 20098 bytes directly received in process context from prequeue 2901643 packet headers predicted 11 packets header predicted and directly queued to user 1418056 acknowledgments not containing data payload received 634650 predicted acknowledgments 73472 times recovered from packet loss by selective acknowledgements Detected reordering 1 times using FACK Detected reordering 20 times using SACK Detected reordering 2 times using time stamp 3 congestion windows fully recovered without slow start 183 congestion windows partially recovered using Hoe heuristic 1 congestion windows recovered without slow start by DSACK 2785 congestion windows recovered without slow start after partial ack 105337 TCP data loss events TCPLostRetransmit: 5375 12836 timeouts after SACK recovery 10945 timeouts in loss state 113186 fast retransmits 624 forward retransmits 64312 retransmits in slow start 81612 other TCP timeouts 13842 SACK retransmits failed 102329 DSACKs sent for old packets 5644 DSACKs sent for out of order packets 3653 DSACKs received 797 DSACKs for out of order packets received 203 connections reset due to unexpected data 2 connections reset due to early user close 36365 connections aborted due to timeout TCPDSACKIgnoredOld: 1540 TCPDSACKIgnoredNoUndo: 1892 TCPSpuriousRTOs: 12 TCPSackShiftFallback: 512079 IpExt: InTruncatedPkts: 35 InMcastPkts: 195 OutMcastPkts: 1 InBcastPkts: 202 InOctets: 1080936898 OutOctets: 721854174 InMcastOctets: 7020 OutMcastOctets: 165 InBcastOctets: 27992 *** Device features: eth0: 0x180 lo: 0x13865 pan0: 0xff3865 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: Dell Device [1028:042b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1840 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 4: I/O ports at 1860 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:042b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 0: Memory at fe704800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: Dell Device [1028:042b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: ce000000-cfffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=06, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: cc000000-cdffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: ca000000-cbffffff Prefetchable memory behind bridge: 00000000f8000000-00000000f9ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: c8000000-c9ffffff Prefetchable memory behind bridge: 00000000fa000000-00000000fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 18c0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:042b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe704c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 30 Region 0: I/O ports at 1818 [size=8] Region 1: I/O ports at 180c [size=4] Region 2: I/O ports at 1810 [size=8] Region 3: I/O ports at 1808 [size=4] Region 4: I/O ports at 18e0 [size=32] Region 5: Memory at fe704000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at 80000000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c00 [size=32] 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Dell Device [1028:042b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at f6000000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f4000000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at f4020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 09:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge ** USB devices: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 413c:8160 Dell Computer Corp. Bus 003 Device 004: ID 413c:8162 Dell Computer Corp. Bus 003 Device 003: ID 413c:8161 Dell Computer Corp. Bus 003 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 064e:8106 Suyin Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686-bigmem (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.95.1 tools for generating an initramfs ii linux-base 2.6.32-15 Linux image base package ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686-bigmem recommends: ii firmware-linux-free 2.6.32-15 Binary firmware for various driver ii libc6-i686 2.11.1-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-686-bigmem suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686-bigmem is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.24 Binary firmware for various driver ii firmware-linux-nonfree 0.24 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-686-bigmem/postinst/bootloader-error-2.6.32-5-686-bigmem: linux-image-2.6.32-5-686-bigmem/postinst/bootloader-test-error-2.6.32-5-686-bigmem: linux-image-2.6.32-5-686-bigmem/prerm/removing-running-kernel-2.6.32-5-686-bigmem: true linux-image-2.6.32-5-686-bigmem/postinst/missing-firmware-2.6.32-5-686-bigmem: linux-image-2.6.32-5-686-bigmem/postinst/depmod-error-initrd-2.6.32-5-686-bigmem: false linux-image-2.6.32-5-686-bigmem/prerm/would-invalidate-boot-loader-2.6.32-5-686-bigmem: true[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 05:38:08 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6a1000 (usable) [ 0.000000] BIOS-e820: 000000007d6a1000 - 000000007d6a7000 (reserved) [ 0.000000] BIOS-e820: 000000007d6a7000 - 000000007d7ba000 (usable) [ 0.000000] BIOS-e820: 000000007d7ba000 - 000000007d80f000 (reserved) [ 0.000000] BIOS-e820: 000000007d80f000 - 000000007d908000 (usable) [ 0.000000] BIOS-e820: 000000007d908000 - 000000007db0f000 (reserved) [ 0.000000] BIOS-e820: 000000007db0f000 - 000000007db1b000 (usable) [ 0.000000] BIOS-e820: 000000007db1b000 - 000000007db1f000 (reserved) [ 0.000000] BIOS-e820: 000000007db1f000 - 000000007db65000 (usable) [ 0.000000] BIOS-e820: 000000007db65000 - 000000007db9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007db9f000 - 000000007dbe5000 (usable) [ 0.000000] BIOS-e820: 000000007dbe5000 - 000000007dbff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007dbff000 - 000000007dc00000 (usable) [ 0.000000] BIOS-e820: 000000007dc00000 - 000000007de00000 (reserved) [ 0.000000] BIOS-e820: 000000007e000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7dc00 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 07E000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 07DE00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037600000 page 2M [ 0.000000] 0037600000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-e000 [ 0.000000] RAMDISK: 37652000 - 37fef225 [ 0.000000] Allocated new RAMDISK: 00100000 - 00a9d225 [ 0.000000] Move RAMDISK from 0000000037652000 - 0000000037fef224 to 00100000 - 00a9d224 [ 0.000000] ACPI: RSDP 000f6030 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 7dbf9408 0007C (v01 DELL INV 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7dbe9000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7dbea000 055E6 (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 7db9efc0 00040 [ 0.000000] ACPI: HPET 7dbfec1e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7dbfec56 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 7dbfec92 0005A (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: SLIC 7dbfecec 00176 (v01 DELL INV 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7dbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 7dbfee8a 00176 (v01 DELL INV 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 7dbf94ac 00024 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe8000 0054F (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1124MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 0000b000 - 00011f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014f9954] TEXT DATA BSS ==> [0001000000 - 00014f9954] [ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000] [ 0.000000] #5 [00014fa000 - 0001507110] BRK ==> [00014fa000 - 0001507110] [ 0.000000] #6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] [ 0.000000] #7 [0000100000 - 0000a9d225] NEW RAMDISK ==> [0000100000 - 0000a9d225] [ 0.000000] #8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000] [ 0.000000] found SMP MP-table at [c00f60d0] f60d0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007dc00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007d6a1 [ 0.000000] 0: 0x0007d6a7 -> 0x0007d7ba [ 0.000000] 0: 0x0007d80f -> 0x0007d908 [ 0.000000] 0: 0x0007db0f -> 0x0007db1b [ 0.000000] 0: 0x0007db1f -> 0x0007db65 [ 0.000000] 0: 0x0007db9f -> 0x0007dbe5 [ 0.000000] 0: 0x0007dbff -> 0x0007dc00 [ 0.000000] On node 0 totalpages: 514275 [ 0.000000] free_area_init_node: node 0, pgdat c13cfe60, node_mem_map c1509000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3965 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2249 pages used for memmap [ 0.000000] HighMem zone: 284799 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c2600000 s37496 r0 d23944 u2097152 [ 0.000000] pcpu-alloc: s37496 r0 d23944 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510250 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686-bigmem root=/dev/mapper/XLaptop-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dc00) [ 0.000000] Memory: 2024120k/2060288k available (2558k kernel code, 32040k reserved, 1384k data, 388k init, 1148192k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc13da000 - 0xc143b000 ( 388 kB) [ 0.000000] .data : 0xc127f8f9 - 0xc13d9ae8 (1384 kB) [ 0.000000] .text : 0xc1000000 - 0xc127f8f9 (2558 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1296.872 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.74 BogoMIPS (lpj=5187488) [ 0.004023] Security Framework initialized [ 0.004029] SELinux: Disabled at boot. [ 0.004037] Mount-cache hash table entries: 512 [ 0.004165] Initializing cgroup subsys ns [ 0.004170] Initializing cgroup subsys cpuacct [ 0.004175] Initializing cgroup subsys devices [ 0.004178] Initializing cgroup subsys freezer [ 0.004181] Initializing cgroup subsys net_cls [ 0.004207] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004210] CPU: L2 cache: 1024K [ 0.004216] mce: CPU supports 6 MCE banks [ 0.004227] CPU0: Thermal monitoring enabled (TM1) [ 0.004231] using mwait in idle threads. [ 0.004239] Performance Events: Core2 events, Intel PMU driver. [ 0.004246] ... version: 2 [ 0.004248] ... bit width: 40 [ 0.004251] ... generic registers: 2 [ 0.004253] ... value mask: 000000ffffffffff [ 0.004256] ... max period: 000000007fffffff [ 0.004258] ... fixed-purpose events: 3 [ 0.004261] ... event mask: 0000000700000003 [ 0.004267] Checking 'hlt' instruction... OK. [ 0.020546] SMP alternatives: switching to UP code [ 0.028212] Freeing SMP alternatives: 13k freed [ 0.028219] ACPI: Core revision 20090903 [ 0.040074] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040462] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083571] CPU0: Intel(R) Celeron(R) CPU 743 @ 1.30GHz stepping 0a [ 0.084001] APIC calibration not consistent with PM-Timer: 295ms instead of 100ms [ 0.084001] APIC delta adjusted to PM-Timer: 1247013 (3691125) [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (2593.74 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 [ 0.084001] PCI: Using MMCONFIG for extended config space [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] bio: create slab <bio-0> at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.084001] ACPI Error: ACPI path has too many parent prefixes (^) - reached beyond root node (20090903/nsaccess-429) [ 0.084001] ACPI Error (psargs-0359): [^LPCB.EC0_.LANW] Namespace lookup failure, AE_NOT_FOUND [ 0.084001] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14ecd50), AE_NOT_FOUND [ 0.084001] ACPI: Executed 1 blocks of module-level executable AML code [ 0.085597] ACPI: BIOS _OSI(Linux) query ignored [ 0.087422] ACPI: Interpreter enabled [ 0.087437] ACPI: (supports S0 S3 S4 S5) [ 0.087467] ACPI: Using IOAPIC for interrupt routing [ 0.094305] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.094766] ACPI: No dock devices found. [ 0.095573] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.095642] DMAR: Forcing write-buffer flush capability [ 0.095686] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe000000-0xfe3fffff] [ 0.095696] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.095703] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.095751] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe400000-0xfe4fffff] [ 0.095888] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.095986] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.096091] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f] [ 0.096187] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe704800-0xfe704bff] [ 0.096261] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.096268] pci 0000:00:1a.7: PME# disabled [ 0.096329] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe700000-0xfe703fff] [ 0.096397] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.096403] pci 0000:00:1b.0: PME# disabled [ 0.096504] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.096510] pci 0000:00:1c.0: PME# disabled [ 0.096615] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.096621] pci 0000:00:1c.1: PME# disabled [ 0.096726] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.096732] pci 0000:00:1c.2: PME# disabled [ 0.096837] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.096843] pci 0000:00:1c.3: PME# disabled [ 0.096949] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.096954] pci 0000:00:1c.4: PME# disabled [ 0.097045] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f] [ 0.097152] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf] [ 0.097250] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df] [ 0.097351] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe704c00-0xfe704fff] [ 0.097425] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.097432] pci 0000:00:1d.7: PME# disabled [ 0.097698] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.097707] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.097717] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.097726] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.097735] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.097745] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe704000-0xfe7047ff] [ 0.097799] pci 0000:00:1f.2: PME# supported from D3hot [ 0.097804] pci 0000:00:1f.2: PME# disabled [ 0.097850] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.097870] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.097961] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.097967] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.097977] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] [ 0.098041] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.098048] pci 0000:00:1c.1: bridge 32bit mmio: [0xce000000-0xcfffffff] [ 0.098057] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] [ 0.098227] pci 0000:05:00.0: reg 10 io port: [0x4000-0x40ff] [ 0.098307] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xf6000000-0xf6000fff] [ 0.098361] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xf4000000-0xf4003fff] [ 0.098389] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.098539] pci 0000:05:00.0: supports D1 D2 [ 0.098542] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.098557] pci 0000:05:00.0: PME# disabled [ 0.099020] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.099027] pci 0000:00:1c.2: bridge 32bit mmio: [0xcc000000-0xcdffffff] [ 0.099036] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.099101] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.099107] pci 0000:00:1c.3: bridge 32bit mmio: [0xca000000-0xcbffffff] [ 0.099117] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf8000000-0xf9ffffff] [ 0.099473] pci 0000:09:00.0: reg 10 64bit mmio: [0xc8000000-0xc8003fff] [ 0.099687] pci 0000:09:00.0: supports D1 D2 [ 0.099690] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.099703] pci 0000:09:00.0: PME# disabled [ 0.100176] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] [ 0.100183] pci 0000:00:1c.4: bridge 32bit mmio: [0xc8000000-0xc9ffffff] [ 0.100193] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfa000000-0xfbffffff] [ 0.100261] pci 0000:00:1e.0: transparent bridge [ 0.100316] pci_bus 0000:00: on NUMA node 0 [ 0.100323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.100506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.100560] ACPI Warning for \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20090903/nspredef-433) [ 0.100635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.100738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.100831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.100925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.101018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.116112] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.116251] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.116387] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.116520] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.116654] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.116789] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.116923] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.117056] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.117185] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.117196] vgaarb: loaded [ 0.117274] PCI: Using ACPI for IRQ routing [ 0.117891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.117898] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.120021] Switching to clocksource tsc [ 0.121653] pnp: PnP ACPI init [ 0.121667] ACPI: bus type pnp registered [ 0.124545] pnp: PnP ACPI: found 11 devices [ 0.124548] ACPI: ACPI bus type pnp unregistered [ 0.124553] PnPBIOS: Disabled by ACPI PNP [ 0.124568] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.124577] system 00:05: ioport range 0x600-0x60f has been reserved [ 0.124582] system 00:05: ioport range 0x680-0x69f has been reserved [ 0.124586] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.124590] system 00:05: ioport range 0x480-0x48f has been reserved [ 0.124594] system 00:05: ioport range 0x900-0x903 has been reserved [ 0.124598] system 00:05: ioport range 0x400-0x47f has been reserved [ 0.124603] system 00:05: ioport range 0x1180-0x11ff has been reserved [ 0.124607] system 00:05: ioport range 0x164e-0x164f has been reserved [ 0.124611] system 00:05: ioport range 0xfe00-0xfe00 has been reserved [ 0.124620] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.124625] system 00:0a: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.124630] system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.124634] system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.124638] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.124645] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.124650] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.159456] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.159462] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.159469] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.159476] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff [ 0.159485] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.159489] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.159497] pci 0000:00:1c.1: MEM window: 0xce000000-0xcfffffff [ 0.159503] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff [ 0.159514] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.159518] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.159526] pci 0000:00:1c.2: MEM window: 0xcc000000-0xcdffffff [ 0.159533] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.159542] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 [ 0.159547] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.159555] pci 0000:00:1c.3: MEM window: 0xca000000-0xcbffffff [ 0.159561] pci 0000:00:1c.3: PREFETCH window: 0x000000f8000000-0x000000f9ffffff [ 0.159571] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09 [ 0.159576] pci 0000:00:1c.4: IO window: 0x6000-0x6fff [ 0.159584] pci 0000:00:1c.4: MEM window: 0xc8000000-0xc9ffffff [ 0.159590] pci 0000:00:1c.4: PREFETCH window: 0x000000fa000000-0x000000fbffffff [ 0.159600] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b [ 0.159603] pci 0000:00:1e.0: IO window: disabled [ 0.159610] pci 0000:00:1e.0: MEM window: disabled [ 0.159615] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.159638] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.159646] pci 0000:00:1c.0: setting latency timer to 64 [ 0.159659] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.159665] pci 0000:00:1c.1: setting latency timer to 64 [ 0.159677] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.159682] pci 0000:00:1c.2: setting latency timer to 64 [ 0.159695] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.159701] pci 0000:00:1c.3: setting latency timer to 64 [ 0.159713] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.159719] pci 0000:00:1c.4: setting latency timer to 64 [ 0.159728] pci 0000:00:1e.0: setting latency timer to 64 [ 0.159734] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.159739] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.159743] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.159746] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.159750] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf1ffffff] [ 0.159754] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.159758] pci_bus 0000:03: resource 1 mem: [0xce000000-0xcfffffff] [ 0.159762] pci_bus 0000:03: resource 2 pref mem [0xf2000000-0xf3ffffff] [ 0.159765] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff] [ 0.159769] pci_bus 0000:05: resource 1 mem: [0xcc000000-0xcdffffff] [ 0.159773] pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.159777] pci_bus 0000:07: resource 0 io: [0x5000-0x5fff] [ 0.159780] pci_bus 0000:07: resource 1 mem: [0xca000000-0xcbffffff] [ 0.159784] pci_bus 0000:07: resource 2 pref mem [0xf8000000-0xf9ffffff] [ 0.159788] pci_bus 0000:09: resource 0 io: [0x6000-0x6fff] [ 0.159791] pci_bus 0000:09: resource 1 mem: [0xc8000000-0xc9ffffff] [ 0.159795] pci_bus 0000:09: resource 2 pref mem [0xfa000000-0xfbffffff] [ 0.159799] pci_bus 0000:0b: resource 3 io: [0x00-0xffff] [ 0.159803] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.159839] NET: Registered protocol family 2 [ 0.159939] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.160299] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.160856] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.161152] TCP: Hash tables configured (established 131072 bind 65536) [ 0.161156] TCP reno registered [ 0.161273] NET: Registered protocol family 1 [ 0.161298] pci 0000:00:02.0: Boot video device [ 0.161528] Unpacking initramfs... [ 0.576422] Freeing initrd memory: 9844k freed [ 0.581327] Simple Boot Flag at 0x36 set to 0x1 [ 0.581640] audit: initializing netlink socket (disabled) [ 0.581655] type=2000 audit(1275467233.579:1): initialized [ 0.581961] highmem bounce pool size: 64 pages [ 0.581967] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.583694] VFS: Disk quotas dquot_6.5.2 [ 0.583760] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.583852] msgmni has been set to 1731 [ 0.584086] alg: No test for stdrng (krng) [ 0.584149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.584153] io scheduler noop registered [ 0.584156] io scheduler anticipatory registered [ 0.584158] io scheduler deadline registered [ 0.584207] io scheduler cfq registered (default) [ 0.584379] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.584393] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.584572] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.584585] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.584761] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.584774] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.584951] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.584963] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.585143] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.585155] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.585358] isapnp: Scanning for PnP cards... [ 0.939475] isapnp: No Plug & Play device found [ 0.941212] Linux agpgart interface v0.103 [ 0.941294] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 0.941847] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 0.970642] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.970723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.971231] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.974746] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.976524] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.976533] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.976565] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.976591] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.976620] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.976724] mice: PS/2 mouse device common for all mice [ 0.976789] rtc_cmos 00:06: RTC can wake from S4 [ 0.976833] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.976868] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.976882] cpuidle: using governor ladder [ 0.976885] cpuidle: using governor menu [ 0.976890] No iBFT detected. [ 0.977335] TCP cubic registered [ 0.977521] NET: Registered protocol family 10 [ 0.978061] lo: Disabled Privacy Extensions [ 0.978450] Mobile IPv6 [ 0.978453] NET: Registered protocol family 17 [ 0.978472] Using IPI No-Shortcut mode [ 0.978573] PM: Resume from disk failed. [ 0.978580] registered taskstats version 1 [ 0.979589] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.980042] rtc_cmos 00:06: setting system clock to 2010-06-02 08:27:15 UTC (1275467235) [ 0.980128] Initalizing network drop monitor service [ 0.980154] Freeing unused kernel memory: 388k freed [ 0.980300] Write protecting the kernel text: 2560k [ 0.980328] Write protecting the kernel read-only data: 936k [ 1.057604] udev: starting version 154 [ 1.358627] usbcore: registered new interface driver usbfs [ 1.358812] usbcore: registered new interface driver hub [ 1.358997] usbcore: registered new device driver usb [ 1.367415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.367451] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.367474] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.367479] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.367501] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.367535] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.371410] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.371429] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfe704800 [ 1.396317] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.396361] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.396460] r8169 0000:05:00.0: setting latency timer to 64 [ 1.396641] r8169 0000:05:00.0: irq 29 for MSI/MSI-X [ 1.397465] eth0: RTL8168d/8111d at 0xf83e4000, 00:26:6c:10:22:6f, XID 08300040 IRQ 29 [ 1.401413] r8169 0000:05:00.0: firmware: requesting rtl8168d-2.fw [ 1.404239] eth0: unable to apply firmware patch [ 1.417522] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.417563] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.417568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.417571] usb usb1: Product: EHCI Host Controller [ 1.417574] usb usb1: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd [ 1.417578] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.417671] usb usb1: configuration #1 chosen from 1 choice [ 1.417713] hub 1-0:1.0: USB hub found [ 1.417722] hub 1-0:1.0: 6 ports detected [ 1.417803] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.417828] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.417832] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.417843] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.417875] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.421768] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.422766] SCSI subsystem initialized [ 1.422789] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe704c00 [ 1.455222] ACPI: Invalid active0 threshold [ 1.455900] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.455911] ACPI: Thermal Zone [THRM] (49 C) [ 1.456280] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.456320] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.456324] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.456328] usb usb2: Product: EHCI Host Controller [ 1.456331] usb usb2: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd [ 1.456334] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.456479] usb usb2: configuration #1 chosen from 1 choice [ 1.456565] hub 2-0:1.0: USB hub found [ 1.456576] hub 2-0:1.0: 6 ports detected [ 1.471173] uhci_hcd: USB Universal Host Controller Interface driver [ 1.471227] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.471238] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.471243] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.471261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.471306] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.471351] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.471356] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.471360] usb usb3: Product: UHCI Host Controller [ 1.471363] usb usb3: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd [ 1.471366] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.471530] usb usb3: configuration #1 chosen from 1 choice [ 1.471616] hub 3-0:1.0: USB hub found [ 1.471626] hub 3-0:1.0: 2 ports detected [ 1.471687] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.471696] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.471700] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.471710] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.471749] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.471789] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.471794] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.471798] usb usb4: Product: UHCI Host Controller [ 1.471801] usb usb4: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd [ 1.471804] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.471934] usb usb4: configuration #1 chosen from 1 choice [ 1.472046] hub 4-0:1.0: USB hub found [ 1.472056] hub 4-0:1.0: 2 ports detected [ 1.472113] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.472121] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.472125] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.472137] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.472170] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 1.472209] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.472215] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472218] usb usb5: Product: UHCI Host Controller [ 1.472221] usb usb5: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd [ 1.472224] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.472352] usb usb5: configuration #1 chosen from 1 choice [ 1.472440] hub 5-0:1.0: USB hub found [ 1.472449] hub 5-0:1.0: 2 ports detected [ 1.472507] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.472516] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.472520] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.472530] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.472561] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 1.472601] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.472606] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472610] usb usb6: Product: UHCI Host Controller [ 1.472613] usb usb6: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd [ 1.472616] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.472741] usb usb6: configuration #1 chosen from 1 choice [ 1.472826] hub 6-0:1.0: USB hub found [ 1.472835] hub 6-0:1.0: 2 ports detected [ 1.472888] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.472898] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.472903] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.472912] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.472943] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 [ 1.472982] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.472987] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472991] usb usb7: Product: UHCI Host Controller [ 1.472994] usb usb7: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd [ 1.472997] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.477376] usb usb7: configuration #1 chosen from 1 choice [ 1.477489] hub 7-0:1.0: USB hub found [ 1.477500] hub 7-0:1.0: 2 ports detected [ 1.477568] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.477580] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.477585] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.477595] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.477640] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 1.477682] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.477687] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.477691] usb usb8: Product: UHCI Host Controller [ 1.477694] usb usb8: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd [ 1.477697] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.477840] usb usb8: configuration #1 chosen from 1 choice [ 1.477926] hub 8-0:1.0: USB hub found [ 1.477935] hub 8-0:1.0: 2 ports detected [ 1.481911] libata version 3.00 loaded. [ 1.506764] ahci 0000:00:1f.2: version 3.0 [ 1.506785] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.506844] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 1.506920] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.506925] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs [ 1.506933] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.507108] scsi0 : ahci [ 1.507328] scsi1 : ahci [ 1.507455] scsi2 : ahci [ 1.508418] scsi3 : ahci [ 1.508483] ata1: SATA max UDMA/133 abar m2048@0xfe704000 port 0xfe704100 irq 30 [ 1.508488] ata2: SATA max UDMA/133 abar m2048@0xfe704000 port 0xfe704180 irq 30 [ 1.508491] ata3: DUMMY [ 1.508493] ata4: DUMMY [ 1.508950] b43-pci-bridge 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.508967] b43-pci-bridge 0000:09:00.0: setting latency timer to 64 [ 1.584286] ssb: Sonics Silicon Backplane found on PCI device 0000:09:00.0 [ 1.828022] ata2: SATA link down (SStatus 0 SControl 300) [ 1.840011] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.992016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.992982] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60S, max UDMA/133 [ 1.992987] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.994158] ata1.00: configured for UDMA/133 [ 1.994280] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5 [ 2.006859] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.006922] sd 0:0:0:0: [sda] Write Protect is off [ 2.006926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.006954] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.007146] sda: [ 2.011490] usb 1-2: New USB device found, idVendor=064e, idProduct=8106 [ 2.011494] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.011498] usb 1-2: Product: Laptop_Integrated_Webcam_1.3M [ 2.011501] usb 1-2: Manufacturer: SuYin [ 2.011589] usb 1-2: configuration #1 chosen from 1 choice [ 2.028446] sda1 sda2 [ 2.029088] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.286379] device-mapper: uevent: version 1.0.3 [ 2.286988] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.308049] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.485369] usb 3-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.485374] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.485378] usb 3-1: Product: BCM2046B1 [ 2.485380] usb 3-1: Manufacturer: Broadcom [ 2.485479] usb 3-1: configuration #1 chosen from 1 choice [ 2.488423] hub 3-1:1.0: USB hub found [ 2.490370] hub 3-1:1.0: 3 ports detected [ 2.732011] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 2.904629] usb 6-1: New USB device found, idVendor=09da, idProduct=000a [ 2.904633] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.904637] usb 6-1: Product: USB Mouse [ 2.904639] usb 6-1: Manufacturer: A4Tech [ 2.904737] usb 6-1: configuration #1 chosen from 1 choice [ 2.922586] usbcore: registered new interface driver hiddev [ 2.922850] usbcore: registered new interface driver usbhid [ 2.922999] usbhid: v2.6:USB HID core driver [ 2.981380] usb 3-1.1: new full speed USB device using uhci_hcd and address 3 [ 3.103382] usb 3-1.1: New USB device found, idVendor=413c, idProduct=8161 [ 3.103386] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.103481] usb 3-1.1: configuration #1 chosen from 1 choice [ 3.110729] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input1 [ 3.110791] generic-usb 0003:413C:8161.0002: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1/input0 [ 3.185384] usb 3-1.2: new full speed USB device using uhci_hcd and address 4 [ 3.309386] usb 3-1.2: New USB device found, idVendor=413c, idProduct=8162 [ 3.309390] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.309488] usb 3-1.2: configuration #1 chosen from 1 choice [ 3.318181] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input2 [ 3.318664] generic-usb 0003:413C:8162.0003: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.2/input0 [ 10.111949] PM: Starting manual resume from disk [ 10.111955] PM: Resume from partition 254:2 [ 10.111957] PM: Checking hibernation image. [ 10.125018] PM: Error -22 checking image file [ 10.125020] PM: Resume from disk failed. [ 10.186110] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 12.893434] udev: starting version 154 [ 13.546223] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 13.546978] ACPI: Lid Switch [LID0] [ 13.547058] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 13.547064] ACPI: Power Button [PWRB] [ 13.547123] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 13.547128] ACPI: Sleep Button [SLPB] [ 13.547202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 13.547207] ACPI: Power Button [PWRF] [ 13.571221] Monitor-Mwait will be used to enter C-1 state [ 13.571248] Monitor-Mwait will be used to enter C-2 state [ 13.571256] Marking TSC unstable due to TSC halts in idle [ 13.571352] processor LNXCPU:00: registered as cooling_device0 [ 13.576179] Switching to clocksource hpet [ 13.617008] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 13.652081] ACPI: AC Adapter [ADP1] (on-line) [ 13.734497] ACPI: Battery Slot [BAT0] (battery present) [ 13.801870] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 13.886944] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 13.886952] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] [ 13.887045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.237246] [drm] Initialized drm 1.1.0 20060810 [ 14.761932] ACPI: EC: input buffer is not empty, aborting transaction [ 14.809480] cfg80211: Using static regulatory domain info [ 14.809485] cfg80211: Regulatory domain: US [ 14.809487] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.809492] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 14.809496] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809499] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809503] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809507] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.809511] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 15.335520] ACPI: EC: input buffer is not empty, aborting transaction [ 15.335599] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 15.335613] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 15.335663] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 15.497250] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input8 [ 15.497523] a4tech 0003:09DA:000A.0001: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1/input0 [ 15.560843] Linux video capture interface: v2.00 [ 15.647471] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.647479] i915 0000:00:02.0: setting latency timer to 64 [ 15.674242] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (064e:8106) [ 15.676591] i915 0000:00:02.0: irq 31 for MSI/MSI-X [ 15.676601] [drm] set up 31M of stolen space [ 15.803957] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9 [ 15.804044] usbcore: registered new interface driver uvcvideo [ 15.804048] USB Video Class driver (v0.1.0) [ 16.633198] ACPI: EC: input buffer is not empty, aborting transaction [ 17.157774] ACPI: EC: input buffer is not empty, aborting transaction [ 17.157853] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 17.157869] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 17.157924] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 17.421593] usb 3-1.3: new full speed USB device using uhci_hcd and address 5 [ 17.553630] usb 3-1.3: New USB device found, idVendor=413c, idProduct=8160 [ 17.553635] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 17.553639] usb 3-1.3: Product: Dell Wireless 365 Bluetooth Module [ 17.553642] usb 3-1.3: Manufacturer: Dell Computer Corp [ 17.553802] usb 3-1.3: configuration #1 chosen from 1 choice [ 17.644487] Bluetooth: Core ver 2.15 [ 17.644546] NET: Registered protocol family 31 [ 17.644548] Bluetooth: HCI device and connection manager initialized [ 17.644551] Bluetooth: HCI socket layer initialized [ 17.687209] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 17.687435] usbcore: registered new interface driver btusb [ 18.217666] Console: switching to colour frame buffer device 170x48 [ 18.217689] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 18.217704] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 18.217756] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 18.227842] fb0: inteldrmfb frame buffer device [ 18.227845] registered panic notifier [ 18.229239] ACPI Warning: _BQC returned an invalid level (20090903/video-631) [ 18.230574] acpi device:02: registered as cooling_device1 [ 18.231580] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 18.231706] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.231987] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.232061] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 18.232133] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.763290] ACPI: EC: input buffer is not empty, aborting transaction [ 18.763373] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 18.763388] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node f7018828), AE_TIME [ 18.763443] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 18.909201] cfg80211: Calling CRDA for country: US [ 19.047688] hda_codec: ALC269: BIOS auto-probing. [ 19.050406] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 19.248744] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 19.398589] phy0: Selected rate control algorithm 'minstrel' [ 19.399415] Registered led device: b43-phy0::tx [ 19.399437] Registered led device: b43-phy0::rx [ 19.399457] Registered led device: b43-phy0::radio [ 19.399529] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 22.413175] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input12 [ 23.115742] loop: module loaded [ 23.798025] Adding 5963768k swap on /dev/mapper/XLaptop-swap_1. Priority:-1 extents:1 across:5963768k [ 24.404747] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 25.945924] r8169: eth0: link up [ 25.945942] r8169: eth0: link up [ 26.042127] fuse init (API version 7.13) [ 27.250749] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 29.572235] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 29.688474] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw [ 29.710716] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw [ 29.868294] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 35.389982] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.394591] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 35.397160] b43-phy0 ERROR: This device does not support DMA on your system. Please use PIO instead. [ 35.399743] b43-phy0: Controller RESET (DMA error) ... [ 35.628252] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 35.957598] apm: BIOS not found. [ 36.327919] Bluetooth: L2CAP ver 2.14 [ 36.327923] Bluetooth: L2CAP socket layer initialized [ 36.407259] Bluetooth: RFCOMM TTY layer initialized [ 36.407265] Bluetooth: RFCOMM socket layer initialized [ 36.407268] Bluetooth: RFCOMM ver 1.11 [ 36.482556] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.482560] Bluetooth: BNEP filters: protocol multicast [ 36.639402] Bridge firewalling registered [ 36.828029] eth0: no IPv6 routers present [ 37.650464] lp: driver loaded but no devices found [ 37.681158] ppdev: user-space parallel port driver [ 41.341046] b43-phy0: Controller restarted [ 41.384102] Bluetooth: SCO (Voice Link) ver 0.6 [ 41.384106] Bluetooth: SCO socket layer initializedAttachment: lspci.log.gz
Description: GNU Zip compressed dataAttachment: lspnp.log.gz
Description: GNU Zip compressed dataAttachment: inteltool.log.gz
Description: GNU Zip compressed dataAttachment: flashrom.log.gz
Description: GNU Zip compressed dataAttachment: dmidecode.log.gz
Description: GNU Zip compressed dataAttachment: acpitool.log.gz
Description: GNU Zip compressed dataAttachment: biosdecode.log.gz
Description: GNU Zip compressed data
--- End Message ---
--- Begin Message ---
- To: 583156-done@bugs.debian.org, 584230-done@bugs.debian.org, 584239-done@bugs.debian.org, 584591-done@bugs.debian.org, 584658-done@bugs.debian.org, 584762-done@bugs.debian.org, 584825-done@bugs.debian.org, 585513-done@bugs.debian.org
- Subject: Closing
- From: Moritz Mühlenhoff <jmm@inutil.org>
- Date: Thu, 6 Jun 2013 00:14:58 +0200
- Message-id: <20130605221458.GG5444@pisco.westfalen.local>
Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.0 / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to control@bugs.debian.org with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---