Your message dated Thu, 6 Jun 2013 00:12:58 +0200 with message-id <20130605221258.GC5444@pisco.westfalen.local> and subject line Closing has caused the Debian Bug report #573246, regarding /proc/acpi/dsdt as the kernel requested to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 573246: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=573246 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: /proc/acpi/dsdt as the kernel requested
- From: Anthony DeRobertis <anthony@derobert.net>
- Date: Tue, 09 Mar 2010 21:03:23 -0500
- Message-id: <20100310020323.16616.30760.reportbug@Heisenberg.home>
Package: linux-2.6 Version: 2.6.33-1~experimental.2 Severity: normal The kernel requests that I send /proc/acpi/dsdt to the developers: [ 5.729554] Asus Laptop ACPI Extras version 0.30 [ 5.740158] ACPI: SSDT 00000000bddb9540 001C4 (v01 PmRef Cpu0Ist 00003000 I NTL 20051117) [ 5.747233] unsupported model UL30A, trying default values [ 5.751230] send /proc/acpi/dsdt to the developers Attached. -- Package-specific info: ** Version: Linux version 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.2) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Sun Feb 28 18:30:42 UTC 2010 ** Command line: BOOT_IMAGE=//vmlinuz-2.6.33-2-amd64 root=/dev/mapper/Heisenberg-root ro ** Not tainted ** Kernel log: [ 2138.710834] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2138.710883] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 2138.710941] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 2138.711097] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 2138.711177] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [ 2138.711208] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfeaf0004) [ 2138.711216] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 2138.711226] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2138.711281] atl1c 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 2138.711315] atl1c 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 2138.711326] atl1c 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 2138.711395] PM: early resume of devices complete after 1.327 msecs [ 2138.787482] i915 0000:00:02.0: setting latency timer to 64 [ 2138.928256] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2138.928265] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2138.928293] usb usb3: root hub lost power or was reset [ 2138.928316] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2138.928324] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2138.928351] usb usb4: root hub lost power or was reset [ 2138.928372] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2138.928380] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2138.928407] usb usb5: root hub lost power or was reset [ 2138.928427] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2138.928436] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2138.928449] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2138.928457] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2138.928510] HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X [ 2139.034240] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2139.034248] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2139.034280] usb usb6: root hub lost power or was reset [ 2139.034309] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2139.034318] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2139.034349] usb usb7: root hub lost power or was reset [ 2139.034374] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2139.034382] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2139.034413] usb usb8: root hub lost power or was reset [ 2139.034472] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2139.034480] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2139.034498] pci 0000:00:1e.0: setting latency timer to 64 [ 2139.034519] ahci 0000:00:1f.2: setting latency timer to 64 [ 2139.034624] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2139.164144] sd 0:0:0:0: [sda] Starting disk [ 2140.864107] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2140.866555] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2140.866945] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 2140.866951] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2140.871645] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2140.872037] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 2140.872042] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2140.873988] ata1.00: configured for UDMA/133 [ 2140.954273] PM: resume of devices complete after 2242.840 msecs [ 2140.954659] PM: Finishing wakeup. [ 2140.954662] Restarting tasks ... done. [ 2141.555932] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2141.570194] atl1c 0000:03:00.0: irq 30 for MSI/MSI-X [ 2141.571151] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2141.896117] ath9k: Two wiphys trying to scan at the same time [ 2152.721448] ath9k: Two wiphys trying to scan at the same time [ 2152.915400] wlan0: direct probe to AP 68:7f:74:12:8e:44 (try 1) [ 2152.920364] wlan0: direct probe responded [ 2152.920375] wlan0: authenticate with AP 68:7f:74:12:8e:44 (try 1) [ 2152.923777] wlan0: authenticated [ 2152.923826] wlan0: associate with AP 68:7f:74:12:8e:44 (try 1) [ 2152.927921] wlan0: RX AssocResp from 68:7f:74:12:8e:44 (capab=0x411 status=0 aid=1) [ 2152.927928] wlan0: associated [ 2152.936370] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2163.592114] wlan0: no IPv6 routers present [ 2219.253133] CE: hpet increasing min_delta_ns to 15000 nsec [ 2298.500296] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 2301.299582] usb 2-2: New USB device found, idVendor=13fd, idProduct=1640 [ 2301.299592] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2301.299599] usb 2-2: Product: SDRW-08D1S-U [ 2301.299603] usb 2-2: Manufacturer: Initio [ 2301.299608] usb 2-2: SerialNumber: 00101016400000005 [ 2301.726628] Initializing USB Mass Storage driver... [ 2301.726882] scsi4 : usb-storage 2-2:1.0 [ 2301.727055] usbcore: registered new interface driver usb-storage [ 2301.727060] USB Mass Storage support registered. [ 2306.728295] scsi 4:0:0:0: CD-ROM ASUS SDRW-08D1S-U A202 PQ: 0 ANSI: 0 [ 2306.847161] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2306.847173] Uniform CD-ROM driver Revision: 3.20 [ 2306.847443] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2306.867725] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2306.868628] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2353.645944] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 2353.674562] ISO 9660 Extensions: RRIP_1991A [ 3152.518312] cdrom: This disc doesn't have any tracks I recognize! [ 3152.537050] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3152.537062] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 3152.537072] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 3152.537085] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 00 00 [ 3152.537107] end_request: I/O error, dev sr0, sector 0 [ 3152.537114] Buffer I/O error on device sr0, logical block 0 [ 3152.539023] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3152.539031] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 3152.539039] sr 4:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 3152.539050] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 00 00 [ 3152.539070] end_request: I/O error, dev sr0, sector 0 [ 3152.539076] Buffer I/O error on device sr0, logical block 0 [ 3290.053993] warning: `growisofs' uses 32-bit capabilities (legacy support in use) ** Model information sys_vendor: ASUSTeK Computer Inc. product_name: UL30A product_version: 1.0 chassis_vendor: ASUSTeK Computer Inc. chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: 212 board_vendor: ASUSTeK Computer Inc. board_name: UL30A board_version: 1.0 ** Loaded modules: Module Size Used by isofs 28408 0 sg 18959 0 sr_mod 12602 0 cdrom 29358 1 sr_mod usb_storage 38425 0 nfs 242205 0 lockd 58547 1 nfs fscache 30058 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33588 1 nfs sunrpc 162578 7 nfs,lockd,nfs_acl,auth_rpcgss sco 7257 2 bridge 39813 0 stp 1440 1 bridge bnep 9722 2 l2cap 25274 3 bnep bluetooth 42103 5 sco,bnep,l2cap acpi_cpufreq 5787 1 cpufreq_userspace 2024 0 cpufreq_powersave 902 0 cpufreq_stats 2659 0 cpufreq_conservative 7910 0 binfmt_misc 6550 1 uinput 6687 1 fuse 50478 1 nls_utf8 1208 1 nls_cp437 5817 1 vfat 7900 1 fat 40118 1 vfat ext2 53966 1 sha256_generic 8692 4 cryptd 5504 0 aes_x86_64 7340 7 aes_generic 25714 1 aes_x86_64 cbc 2539 2 coretemp 4245 0 loop 11902 0 dm_crypt 10744 2 snd_hda_codec_intelhdmi 14085 1 arc4 1274 2 ecb 1841 2 snd_hda_codec_realtek 243343 1 ath9k 62433 0 ath9k_common 2025 1 ath9k snd_hda_intel 20179 0 snd_hda_codec 57782 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel mac80211 140504 2 ath9k,ath9k_common snd_hwdep 5428 1 snd_hda_codec snd_pcm_oss 32790 0 snd_mixer_oss 12654 1 snd_pcm_oss snd_pcm 61254 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss ath9k_hw 197916 2 ath9k,ath9k_common ath 8354 2 ath9k,ath9k_hw uvcvideo 52292 0 snd_seq_midi 4432 0 snd_rawmidi 15810 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 43279 2 snd_seq_midi,snd_seq_midi_event cfg80211 105832 4 ath9k,ath9k_common,mac80211,ath videodev 31744 1 uvcvideo v4l1_compat 11442 2 uvcvideo,videodev rfkill 13164 4 bluetooth,cfg80211 v4l2_compat_ioctl32 9160 1 videodev snd_timer 15749 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq tpm_tis 7336 0 asus_laptop 13914 0 tpm 9933 1 tpm_tis snd 47090 12 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device atl1c 26334 0 led_class 2417 2 ath9k,asus_laptop battery 4998 0 ac 2192 0 tpm_bios 4521 1 tpm soundcore 4822 1 snd pcspkr 1699 0 processor 29489 3 acpi_cpufreq psmouse 45587 0 snd_page_alloc 6313 2 snd_hda_intel,snd_pcm serio_raw 3960 0 evdev 7384 25 ext4 278926 2 mbcache 5050 2 ext2,ext4 jbd2 63225 1 ext4 crc16 1319 2 l2cap,ext4 dm_mod 55446 14 dm_crypt sd_mod 30459 4 crc_t10dif 1276 1 sd_mod i915 249816 2 uhci_hcd 18585 0 drm_kms_helper 20097 1 i915 drm 143558 3 i915,drm_kms_helper i2c_algo_bit 4225 1 i915 ahci 32182 3 libata 133993 1 ahci scsi_mod 123365 5 sg,sr_mod,usb_storage,sd_mod,libata intel_agp 25641 1 ehci_hcd 31298 0 i2c_core 15385 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit video 18001 1 i915 output 1692 1 video usbcore 126389 5 usb_storage,uvcvideo,uhci_hcd,ehci_hcd nls_base 6377 6 isofs,nls_utf8,nls_cp437,vfat,fat,usbcore button 4634 1 i915 thermal 11889 0 fan 3266 0 thermal_sys 11990 4 processor,video,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:1862] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 28 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at dc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) Subsystem: ASUSTeK Computer Inc. Device [1043:1862] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at d880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at d800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at d480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe9fbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:1443] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe9fb800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:1c47] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 27 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c880 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at c480 [size=4] Region 4: I/O ports at c400 [size=32] Region 5: Memory at fe9fb000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Device [1a3b:1089] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Atheros Communications Atheros AR8132 / L1c Gigabit Ethernet Adapter [1969:1062] (rev c0) Subsystem: ASUSTeK Computer Inc. Device [1043:14e5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at febc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at ec00 [size=128] Capabilities: <access denied> Kernel driver in use: atl1c ** USB devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 04f2:b036 Chicony Electronics Co., Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 13fd:1640 Initio Corporation Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (150, 'unstable'), (100, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.33-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.33-2-amd64 depends on: ii debconf [debconf 1.5.28 Debian configuration management sy ii initramfs-tools 0.93.4 tools for generating an initramfs ii linux-base 2.6.33-1~experimental.2 Linux image base package ii module-init-tool 3.12~pre1-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.33-2-amd64 recommends: ii firmware-linux-free 2.6.32-5 Binary firmware for various driver Versions of packages linux-image-2.6.33-2-amd64 suggests: pn grub | lilo <none> (no description available) ii linux-doc-2.6.33 2.6.33-1~experimental.2 Linux kernel specific documentatio Versions of packages linux-image-2.6.33-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.22 Binary firmware for various driver ii firmware-linux-nonfree 0.22 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information excludedAttachment: dsdt.gz
Description: GNU Zip compressed data
--- End Message ---
--- Begin Message ---
- To: 573246-done@bugs.debian.org, 573879-done@bugs.debian.org, 573900-done@bugs.debian.org, 574273-done@bugs.debian.org, 574555-done@bugs.debian.org, 574845-done@bugs.debian.org, 575175-done@bugs.debian.org, 575578-done@bugs.debian.org
- Subject: Closing
- From: Moritz Mühlenhoff <jmm@inutil.org>
- Date: Thu, 6 Jun 2013 00:12:58 +0200
- Message-id: <20130605221258.GC5444@pisco.westfalen.local>
Hi, your bug has been filed against the "linux-2.6" source package and was filed for a kernel older than the recently released Debian 7.0 / Wheezy with a severity less than important. We don't have the ressources to reproduce the complete backlog of all older kernel bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy or a more recent kernel from testing or unstable, please reopen the bug by sending a mail to control@bugs.debian.org with the following three commands included in the mail: reopen BUGNUMBER reassign BUGNUMBER src:linux thanks Cheers, Moritz
--- End Message ---