[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#571088: marked as done (linux-image-2.6-amd64: sporadic kernel warning in net/mac80211/rx.c)

Your message dated Thu, 6 Jun 2013 00:12:28 +0200
with message-id <20130605221227.GB5444@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #571088,
regarding linux-image-2.6-amd64: sporadic kernel warning in net/mac80211/rx.c
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
571088: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=571088
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6-amd64
Version: 2.6.32+24
Severity: normal

The Linux kernel on my AMD64 WLAN-AP/gateway machine spits the following
warning to the syslog from time to time:

Feb 23 11:46:12 pneumantius kernel: [ 3008.768447] ------------[ cut here ]------------
Feb 23 11:46:12 pneumantius kernel: [ 3008.768489] WARNING: at /build/buildd-linux-2.6_2.6.32-8-amd64-DCxXqz/linux-2.6-2.6.32/debian/build/source_amd64_none/net/mac80211/rx.c:2491 ieee80211_rx+0xdf/0x5ce [mac80211]()
Feb 23 11:46:12 pneumantius kernel: [ 3008.768497] Hardware name: GA-MA74GM-S2H
Feb 23 11:46:12 pneumantius kernel: [ 3008.768500] Modules linked in: ppdev lp parport kvm_amd kvm cpufreq_stats cpufreq_conservative cpufreq_powersave iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables fuse nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc bridge stp tun sit tunnel4 it87 hwmon_vid cpufreq_userspace powernow_k8 loop snd_hda_codec_atihdmi snd_hda_intel arc4 snd_hda_codec snd_hwdep snd_pcsp ecb snd_pcm ath9k mac80211 ath cfg80211 rfkill snd_timer i2c_piix4 led_class serio_raw snd shpchp edac_core soundcore evdev k8temp edac_mce_amd i2c_core snd_page_alloc pci_hotplug processor ext3 jbd mbcache dm_mod raid1 md_mod sd_mod crc_t10dif ide_gd_mod ata_generic ohci_hcd ide_pci_generic ahci atiixp libata ehci_hcd e100 r8169 mii button ide_core scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768614] Pid: 0, comm: swapper Not tainted 2.6.32-2-amd64 #1
Feb 23 11:46:12 pneumantius kernel: [ 3008.768619] Call Trace:
Feb 23 11:46:12 pneumantius kernel: [ 3008.768623]  <IRQ>  [<ffffffffa02dc8d5>] ? ieee80211_rx+0xdf/0x5ce [mac80211]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768658]  [<ffffffffa02dc8d5>] ? ieee80211_rx+0xdf/0x5ce [mac80211]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768669]  [<ffffffff8104dbe8>] ? warn_slowpath_common+0x77/0xa3
Feb 23 11:46:12 pneumantius kernel: [ 3008.768687]  [<ffffffffa02dc8d5>] ? ieee80211_rx+0xdf/0x5ce [mac80211]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768705]  [<ffffffffa0313531>] ? dma_map_single_attrs+0x83/0x92 [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768721]  [<ffffffffa0313e4d>] ? ath_rx_tasklet+0x7c2/0x81b [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768732]  [<ffffffff812eeddd>] ? _spin_unlock_irqrestore+0x8/0xe
Feb 23 11:46:12 pneumantius kernel: [ 3008.768747]  [<ffffffffa03120c9>] ? ath9k_tasklet+0x4a/0xb8 [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768756]  [<ffffffff810522b6>] ? tasklet_action+0x78/0xce
Feb 23 11:46:12 pneumantius kernel: [ 3008.768770]  [<ffffffffa02feaa1>] ? ath9k_hw_set_interrupts+0x1fc/0x286 [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768779]  [<ffffffff8105397a>] ? __do_softirq+0xdd/0x19f
Feb 23 11:46:12 pneumantius kernel: [ 3008.768793]  [<ffffffffa031340a>] ? ath_isr+0x139/0x14f [ath9k]
Feb 23 11:46:12 pneumantius kernel: [ 3008.768802]  [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
Feb 23 11:46:12 pneumantius kernel: [ 3008.768809]  [<ffffffff81013903>] ? do_softirq+0x3f/0x7c
Feb 23 11:46:12 pneumantius kernel: [ 3008.768817]  [<ffffffff810537e9>] ? irq_exit+0x36/0x76
Feb 23 11:46:12 pneumantius kernel: [ 3008.768823]  [<ffffffff81012ffa>] ? do_IRQ+0xa0/0xb6
Feb 23 11:46:12 pneumantius kernel: [ 3008.768830]  [<ffffffff810114d3>] ? ret_from_intr+0x0/0x11
Feb 23 11:46:12 pneumantius kernel: [ 3008.768834]  <EOI>  [<ffffffff8102c568>] ? native_safe_halt+0x2/0x3
Feb 23 11:46:12 pneumantius kernel: [ 3008.768849]  [<ffffffff81017cb5>] ? default_idle+0x34/0x51
Feb 23 11:46:12 pneumantius kernel: [ 3008.768856]  [<ffffffff81018041>] ? c1e_idle+0xf5/0xfb
Feb 23 11:46:12 pneumantius kernel: [ 3008.768864]  [<ffffffff8100fe90>] ? cpu_idle+0xa2/0xda
Feb 23 11:46:12 pneumantius kernel: [ 3008.768872]  [<ffffffff814d8140>] ? early_idt_handler+0x0/0x71
Feb 23 11:46:12 pneumantius kernel: [ 3008.768880]  [<ffffffff814d8cd7>] ? start_kernel+0x3d0/0x3dc
Feb 23 11:46:12 pneumantius kernel: [ 3008.768887]  [<ffffffff814d83b7>] ? x86_64_start_kernel+0xf9/0x106
Feb 23 11:46:12 pneumantius kernel: [ 3008.768893] ---[ end trace 36bb7d5421f8fb5d ]---

The same warning already occurred with linux-image-2.6.32-trunk-amd64 if that
matters. I had no older kernel running on the same hardware and cannot tell
whether the warning happens there too. I experience no strange behaviour or
system crashes afterwards. I attach the output of dmidecode and lspci -vvv to
aid debugging.


Regards
Jan Dittberner


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (890, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-2-amd64 (SMP w/1 CPU core)
Locale: LANG=de, LC_CTYPE=de (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6-amd64 depends on:
ii  linux-image-2.6.32-2-amd64    2.6.32-8   Linux 2.6.32 for 64-bit PCs

linux-image-2.6-amd64 recommends no packages.

linux-image-2.6-amd64 suggests no packages.

-- no debconf information

-- 
Jan Dittberner - Debian Developer
GPG-key: 4096R/558FB8DD 2009-05-10
         B2FF 1D95 CE8F 7A22 DF4C  F09B A73E 0055 558F B8DD
http://ddportfolio.debian.net/ - http://people.debian.org/~jandd/

# dmidecode 2.9
SMBIOS 2.4 present.
46 structures occupying 2162 bytes.
Table at 0x000F0100.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: Award Software International, Inc.
	Version: FC
	Release Date: 08/13/2009
	Address: 0xE0000
	Runtime Size: 128 kB
	ROM Size: 1024 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/360 KB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 KB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		AGP is supported
		LS-120 boot is supported
		ATAPI Zip drive boot is supported
		BIOS boot specification is supported
		Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: Gigabyte Technology Co., Ltd.
	Product Name: GA-MA74GM-S2H
	Version:  
	Serial Number:  
	UUID: 30303234-3144-3544-4634-3641FFFFFFFF
	Wake-up Type: Power Switch
	SKU Number:  
	Family:  

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: Gigabyte Technology Co., Ltd.
	Product Name: GA-MA74GM-S2H
	Version: x.x
	Serial Number:  

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
	Manufacturer: Gigabyte Technology Co., Ltd.
	Type: Desktop
	Lock: Not Present
	Version:  
	Serial Number:  
	Asset Tag:  
	Boot-up State: Unknown
	Power Supply State: Unknown
	Thermal State: Unknown
	Security Status: Unknown
	OEM Information: 0x00000000

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
	Socket Designation: Socket M2
	Type: Central Processor
	Family: Athlon
	Manufacturer: AMD
	ID: F2 0F 04 00 FF FB 8B 07
	Signature: Family 15, Model 79, Stepping 2
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		MMX (MMX technology supported)
		FXSR (Fast floating-point save and restore)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
	Version: AMD Athlon(tm) 64 Processor 3500+
	Voltage: 1.4 V
	External Clock: 200 MHz
	Max Speed: 3200 MHz
	Current Speed: 2200 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x0008
	L2 Cache Handle: 0x000A
	L3 Cache Handle: Not Provided
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
	Error Detecting Method: 64-bit ECC
	Error Correcting Capabilities:
		None
	Supported Interleave: One-way Interleave
	Current Interleave: One-way Interleave
	Maximum Memory Module Size: 1024 MB
	Maximum Total Memory Size: 2048 MB
	Supported Speeds:
		70 ns
		60 ns
	Supported Memory Types:
		Standard
		EDO
	Memory Module Voltage: 3.3 V
	Associated Memory Slots: 2
		0x0006
		0x0007
	Enabled Error Correcting Capabilities:
		None

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A0
	Bank Connections: 1
	Current Speed: 155 ns
	Type: Other Unknown EDO
	Installed Size: 1024 MB (Double-bank Connection)
	Enabled Size: 1024 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: A1
	Bank Connections: 2
	Current Speed: 155 ns
	Type: Other Unknown EDO
	Installed Size: 1024 MB (Double-bank Connection)
	Enabled Size: 1024 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0008, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Internal Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 128 KB
	Maximum Size: 128 KB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x0009, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Internal Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 128 KB
	Maximum Size: 128 KB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
	Socket Designation: External Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 512 KB
	Maximum Size: 512 KB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
	Socket Designation: External Cache
	Configuration: Disabled, Not Socketed, Level 2
	Operational Mode: Write Through
	Location: Internal
	Installed Size: 0 KB
	Maximum Size: 1024 KB
	Supported SRAM Types:
		Synchronous
	Installed SRAM Type: Synchronous
	Speed: Unknown
	Error Correction Type: Unknown
	System Type: Unknown
	Associativity: Unknown

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PRIMARY IDE
	Internal Connector Type: On Board IDE
	External Reference Designator:  
	External Connector Type: None
	Port Type: Other

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FDD
	Internal Connector Type: On Board Floppy
	External Reference Designator:  
	External Connector Type: None
	Port Type: 8251 FIFO Compatible

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM1
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator:  
	External Connector Type: DB-9 male
	Port Type: Serial Port 16450 Compatible

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: LPT1
	Internal Connector Type: DB-25 female
	External Reference Designator:  
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: Keyboard
	Internal Connector Type: Other
	External Reference Designator:  
	External Connector Type: PS/2
	Port Type: Keyboard Port

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: USB
	Internal Connector Type: None
	External Reference Designator:  
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x001D, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Long
	ID: 7
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported

Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Long
	ID: 6
	Characteristics:
		5.0 V is provided
		3.3 V is provided
		PME signal is supported
		SMBus signal is supported

Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI Express x16
	Type: x16 PCI Express
	Current Usage: Unknown
	Length: Other
	ID: 0
	Characteristics:
		3.3 V is provided

Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
	Designation: PCI Express x1
	Type: x1 PCI Express
	Current Usage: Unknown
	Length: Other
	ID: 0
	Characteristics:
		3.3 V is provided

Handle 0x0021, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 3
		n|US|iso8859-1
		n|US|iso8859-1
		r|CA|iso8859-1
	Currently Installed Language: n|US|iso8859-1

Handle 0x0022, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 1 GB
	Error Information Handle: Not Provided
	Number Of Devices: 2

Handle 0x0023, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0022
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: A0
	Bank Locator: Bank0/1
	Type: Unknown
	Type Detail: None
	Speed: 667 MHz (1.5 ns)
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0024, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0022
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: A1
	Bank Locator: Bank2/3
	Type: Unknown
	Type Detail: None
	Speed: 667 MHz (1.5 ns)
	Manufacturer:  
	Serial Number:  
	Asset Tag:  
	Part Number:  

Handle 0x0025, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 2 GB
	Physical Array Handle: 0x0022
	Partition Width: 32

Handle 0x0026, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x0003FFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x0023
	Memory Array Mapped Address Handle: 0x0025
	Partition Row Position: 1

Handle 0x0027, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00040000000
	Ending Address: 0x0007FFFFFFF
	Range Size: 1 GB
	Physical Device Handle: 0x0024
	Memory Array Mapped Address Handle: 0x0025
	Partition Row Position: 1

Handle 0x0028, DMI type 32, 11 bytes
System Boot Information
	Status: No errors detected

Handle 0x0029, DMI type 188, 244 bytes
OEM-specific Type
	Header and Data:
		BC F4 29 00 00 00 00 80 00 00 00 00 00 00 00 00
		00 00 00 00 01 06 16 00 00 00 00 00 03 00 00 00
		00 00 7F 00 00 00 00 00 01 00 00 00 00 00 00 00
		02 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
		04 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00
		06 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00
		40 00 10 02 00 00 00 00 00 00 03 00 EF 02 00 5D
		01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		E0 3E 78 00 00 00 00 00 00 00 00 00 00 00 00 00
		46 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
		24 CA 69 5D 20 13 12 00 10 0C 01 00 6A 00 10 67
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00

Handle 0x002A, DMI type 190, 212 bytes
OEM-specific Type
	Header and Data:
		BE D4 2A 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00

Handle 0x002B, DMI type 192, 244 bytes
OEM-specific Type
	Header and Data:
		C0 F4 2B 00 17 16 17 17 16 16 17 17 17 00 00 00
		17 17 17 17 17 17 17 16 17 00 00 00 2E 00 00 00
		17 15 16 16 17 16 16 16 17 17 18 18 17 15 17 18
		18 17 30 00 00 00 22 12 11 20 20 22 20 00 22 12
		11 20 20 22 20 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00

Handle 0x002C, DMI type 194, 244 bytes
OEM-specific Type
	Header and Data:
		C2 F4 2C 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00

Handle 0x002D, DMI type 127, 4 bytes
End Of Table


00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
	Subsystem: Giga-byte Technology Device 5000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 32

00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fdd00000-fdefffff
	Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)

00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 4 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fda00000-fdafffff
	Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #  6, PowerLimit 25.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet+ LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0100c  Data: 4151
	Capabilities: [b0] Subsystem: Giga-byte Technology Device 5000
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntrySize=0
		Arb:	Fixed- WRR32- WRR64- WRR128- 100ns- - - onfig- TableOffset=0
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Fixed- RR32-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: pcieport

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
	Subsystem: Giga-byte Technology Device b002
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at ff00 [size=8]
	Region 1: I/O ports at fe00 [size=4]
	Region 2: I/O ports at fd00 [size=8]
	Region 3: I/O ports at fc00 [size=4]
	Region 4: I/O ports at fb00 [size=16]
	Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] SATA HBA v1.0 InCfgSpace
	Kernel driver in use: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci_hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci_hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
	Subsystem: Giga-byte Technology Device 4385
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: piix4_smbus

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
	Subsystem: Giga-byte Technology Device 5002
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at fa00 [size=16]
	Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000
	Kernel driver in use: ATIIXP_IDE

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
	Subsystem: Giga-byte Technology Device 5001
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fdc00000-fdcfffff
	Prefetchable memory behind bridge: fdb00000-fdbfffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Device 5004
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Revision ID: 1.02
		Link Frequency: 1.0GHz
		Link Error: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [f0] Secure device <?>
	Kernel driver in use: k8temp

01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 2100 (prog-if 00 [VGA controller])
	Subsystem: Giga-byte Technology Device d000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at f8000000 (64-bit, prefetchable) [size=64M]
	Region 2: Memory at fdee0000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at ee00 [size=256]
	Region 5: Memory at fdd00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000

01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller
	Subsystem: Giga-byte Technology Device 7919
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 4 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at fdefc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: HDA Intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at de00 [size=256]
	Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
	[virtual] Expansion ROM at fdf00000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0100c  Data: 4161
	Capabilities: [70] Express (v1) Endpoint, MSI 01
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
		Vector table: BAR=4 offset=00000000
		PBA: BAR=4 offset=00000800
	Capabilities: [d0] Vital Product Data
		Unknown small resource type 00, will not decode more.
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [140 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntrySize=0
		Arb:	Fixed- WRR32- WRR64- WRR128- 100ns- - - onfig- TableOffset=0
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Fixed- RR32-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number 12-34-56-78-12-34-56-78
	Kernel driver in use: r8169

03:06.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
	Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 14000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fdcff000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cf00 [size=64]
	Region 2: Memory at fdcc0000 (32-bit, non-prefetchable) [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: e100

03:07.0 Network controller: Atheros Communications Inc. AR922X Wireless Network Adapter (rev 01)
	Subsystem: D-Link System Inc Device 3a78
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 4 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at fdce0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=100mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ath9k

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message --- 
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---
Reply to: