--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.32-3-686: module sn9c102 over gspca_sonixb
- From: Orlando Bedoya Marin <bedorlan@gmail.com>
- Date: Mon, 26 Apr 2010 23:15:49 -0500
- Message-id: <p2qf7d090a61004262115g44e19h937f4da83c2b4d97@mail.gmail.com>
- In-reply-to: <20100427040907.3374.33499.reportbug@lady>
- References: <20100427040907.3374.33499.reportbug@lady>
Package: linux-2.6
Version: 2.6.32-9
Severity: normal
Tags: sid
The webcam genius videocam messenger (ID 0c45:602e Microdia VideoCAM Messenger)
works with the gspca_sonixb module, not with the sn9c102 module. The image with
the sn9c102 module is really dark. Is not posible to enable the gspca_sonixb
module because is disabled from kernel source as i can see in sonixb.c
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
#endif
-- Package-specific info:
** Version:
Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=/dev/hda1 ro
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 3730.939417] usb 1-2: V4L2 device /dev/video0 deregistered
[ 3750.111544] gspca: main v2.7.0 registered
[ 3750.175923] usbcore: registered new interface driver sonixb
[ 3750.177101] sonixb: registered
[ 4133.763174] usbcore: deregistering interface driver sonixb
[ 4133.764795] sonixb: deregistered
[ 4133.766358] gspca: main deregistered
[ 4161.184700] gspca: main v2.7.0 registered
[ 4161.186260] gspca_sonixb: Unknown parameter `help'
[ 4180.152724] sn9c102: Unknown parameter `help'
[ 4187.176585] sn9c102: Unknown parameter `gamma'
[ 4282.740797] sn9c102: Unknown parameter `--help'
[ 4361.241805] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers
v1:1.47pre49
[ 4361.243801] usb 1-2: SN9C10[12] PC Camera Controller detected
(vid:pid 0x0C45:0x602E)
[ 4361.396768] usb 1-2: [sn9c102_i2c_try_raw_write:468] I2C write
failed for MT9V111 image sensor
[ 4361.531769] usb 1-2: OV7630 image sensor detected
[ 4361.531780] usb 1-2: [sn9c102_usb_probe:3311] Support for OV7630
maintained by Luca Risolia <luca.risolia@studio.unibo.it>
[ 4361.816714] usb 1-2: [sn9c102_init:1684] Compressed video format is
active, quality 1
[ 4361.831721] usb 1-2: [sn9c102_init:1707] Image sensor supports
'global gain' control
[ 4361.840706] usb 1-2: [sn9c102_init:1707] Image sensor supports
'exposure' control
[ 4361.849702] usb 1-2: [sn9c102_init:1707] Image sensor supports
'white balance background: red' control
[ 4361.858702] usb 1-2: [sn9c102_init:1707] Image sensor supports
'white balance background: blue' control
[ 4361.861703] usb 1-2: [sn9c102_init:1707] Image sensor supports 'red
balance' control
[ 4361.864701] usb 1-2: [sn9c102_init:1707] Image sensor supports
'blue balance' control
[ 4361.873700] usb 1-2: [sn9c102_init:1707] Image sensor supports
'auto adjust' control
[ 4361.882710] usb 1-2: [sn9c102_init:1707] Image sensor supports
'vertical flip' control
[ 4361.885701] usb 1-2: [sn9c102_init:1707] Image sensor supports
'green balance' control
[ 4361.894706] usb 1-2: [sn9c102_init:1707] Image sensor supports
'band filter' control
[ 4361.903699] usb 1-2: [sn9c102_init:1707] Image sensor supports 'rgb
gamma' control
[ 4361.903712] usb 1-2: Initialization succeeded
[ 4361.903901] usb 1-2: V4L2 device registered as /dev/video0
[ 4361.903905] usb 1-2: Optional device control through 'sysfs'
interface disabled
[ 4361.903909] usb 1-2: [sn9c102_usb_probe:3368] Compile the kernel
with the 'CONFIG_VIDEO_ADV_DEBUG' configuration option to enable it.
[ 4361.903945] usbcore: registered new interface driver sn9c102
[ 4361.913828] usb 1-2: [sn9c102_open:1848] Video device /dev/video0 is open
[ 4361.913849] sn9c102: VIDIOC_QUERYCAP
[ 4361.917763] usb 1-2: [sn9c102_release:1873] Video device /dev/video0 closed
[ 4361.969941] usb 1-2: [sn9c102_open:1848] Video device /dev/video0 is open
[ 4361.969961] sn9c102: VIDIOC_QUERYCAP
[ 4361.974856] usb 1-2: [sn9c102_release:1873] Video device /dev/video0 closed
[ 4394.743263] usbcore: deregistering interface driver sn9c102
[ 4394.743307] usb 1-2: Disconnecting SN9C1xx PC Camera...
[ 4394.743311] usb 1-2: V4L2 device /dev/video0 deregistered
[ 4400.941855] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers
v1:1.47pre49
[ 4400.943792] usb 1-2: SN9C10[12] PC Camera Controller detected
(vid:pid 0x0C45:0x602E)
[ 4401.231761] usb 1-2: OV7630 image sensor detected
[ 4401.603698] usb 1-2: Initialization succeeded
[ 4401.605496] usb 1-2: V4L2 device registered as /dev/video0
[ 4401.605506] usb 1-2: Optional device control through 'sysfs'
interface disabled
[ 4401.605588] usbcore: registered new interface driver sn9c102
[ 4410.723191] usbcore: deregistering interface driver sn9c102
[ 4410.723235] usb 1-2: Disconnecting SN9C1xx PC Camera...
[ 4410.723239] usb 1-2: V4L2 device /dev/video0 deregistered
[ 4520.544334] gspca: main deregistered
[ 5684.033193] gspca: main v2.7.0 registered
[ 5684.035845] usbcore: registered new interface driver sonixb
[ 5684.036879] sonixb: registered
[ 5706.032048] usbcore: deregistering interface driver sonixb
[ 5706.033479] sonixb: deregistered
[ 5706.034758] gspca: main deregistered
[ 6331.615166] usb 1-2: USB disconnect, address 2
[ 6338.372037] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 6338.552039] usb 1-2: device descriptor read/64, error -62
[ 6338.836029] usb 1-2: device descriptor read/64, error -62
[ 6339.116036] usb 1-2: new full speed USB device using ohci_hcd and address 4
[ 6339.296043] usb 1-2: device descriptor read/64, error -62
[ 6339.580047] usb 1-2: device descriptor read/64, error -62
[ 6339.860029] usb 1-2: new full speed USB device using ohci_hcd and address 5
[ 6340.268022] usb 1-2: device not accepting address 5, error -62
[ 6340.444030] usb 1-2: new full speed USB device using ohci_hcd and address 6
[ 6340.852021] usb 1-2: device not accepting address 6, error -62
[ 6340.852060] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 6360.884030] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 6361.064041] usb 3-1: device descriptor read/64, error -62
[ 6361.348033] usb 3-1: device descriptor read/64, error -62
[ 6361.628040] usb 3-1: new full speed USB device using ohci_hcd and address 3
[ 6361.808282] usb 3-1: device descriptor read/64, error -62
[ 6362.092031] usb 3-1: device descriptor read/64, error -62
[ 6362.372033] usb 3-1: new full speed USB device using ohci_hcd and address 4
[ 6362.780040] usb 3-1: device not accepting address 4, error -62
[ 6362.956035] usb 3-1: new full speed USB device using ohci_hcd and address 5
[ 6363.364025] usb 3-1: device not accepting address 5, error -62
[ 6363.364063] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 6383.500048] usb 1-2: new full speed USB device using ohci_hcd and address 7
[ 6383.709971] usb 1-2: New USB device found, idVendor=0c45, idProduct=602e
[ 6383.709980] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6383.709983] usb 1-2: Product: USB camera
[ 6383.710203] usb 1-2: configuration #1 chosen from 1 choice
[ 6383.765147] gspca: main v2.7.0 registered
[ 6383.767726] usbcore: registered new interface driver sonixb
[ 6383.768859] sonixb: registered
[ 6446.595276] usbcore: deregistering interface driver sonixb
[ 6446.596969] sonixb: deregistered
[ 6446.598487] gspca: main deregistered
[ 7148.244281] gspca: main v2.7.0 registered
[ 7148.247045] usbcore: registered new interface driver sonixb
[ 7148.247727] sonixb: registered
[ 7159.924981] usbcore: deregistering interface driver sonixb
[ 7159.925841] sonixb: deregistered
[ 7159.926946] gspca: main deregistered
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4058 0
lp 5570 0
fuse 43750 1
loop 9753 0
tuner_simple 9694 1
tuner_types 7537 1 tuner_simple
snd_intel8x0 19523 2
tea5767 4529 0
snd_ac97_codec 79140 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
tuner 14428 1
snd_pcm_oss 28671 0
snd_mixer_oss 10461 2 snd_pcm_oss
snd_pcm 47362 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event
saa7134 119996 0
ir_common 22187 1 saa7134
snd_timer 12258 2 snd_pcm,snd_seq
v4l2_common 9816 2 tuner,saa7134
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
videodev 25541 3 tuner,saa7134,v4l2_common
snd 34363 11
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
v4l1_compat 10250 1 videodev
videobuf_dma_sg 7199 1 saa7134
videobuf_core 10476 2 saa7134,videobuf_dma_sg
ns558 1599 0
tveeprom 9393 1 saa7134
psmouse 44413 0
evdev 5609 9
gameport 6057 2 ns558
serio_raw 2916 0
parport_pc 15799 1
parport 22554 3 ppdev,lp,parport_pc
soundcore 3450 2 snd
i2c_sis96x 2553 0
processor 26571 0
shpchp 21220 0
pcspkr 1207 0
pci_hotplug 18065 1 shpchp
snd_page_alloc 5041 2 snd_intel8x0,snd_pcm
ext4 254909 1
mbcache 3762 1 ext4
jbd2 56059 1 ext4
crc16 1027 1 ext4
ide_cd_mod 21076 0
cdrom 26487 1 ide_cd_mod
ide_gd_mod 17171 3
ide_pci_generic 1924 0
ata_generic 2015 0
libata 114408 1 ata_generic
scsi_mod 101297 1 libata
ohci_hcd 16904 0
ehci_hcd 27574 0
nvidia 8783321 28
sis900 13795 0
sis5513 4888 2
sis_agp 3145 1
floppy 40923 0
i2c_core 12648 9
tuner_simple,tea5767,tuner,saa7134,v4l2_common,videodev,tveeprom,i2c_sis96x,nvidia
button 3598 0
mii 2714 1 sis900
usbcore 98126 3 ohci_hcd,ehci_hcd
nls_base 4541 1 usbcore
ide_core 64146 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,sis5513
agpgart 19516 2 nvidia,sis_agp
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS]
741/741GX/M741 Host [1039:0741] (rev 03)
Subsystem: ASRock Incorporation Device [1849:0741]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP
Port (virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
Memory behind bridge: cbd00000-cfefffff
Prefetchable memory behind bridge: aba00000-cbbfffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963
[MuTIOL Media IO] [1039:0963] (rev 25)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus
Controller [1039:0016]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0c00 [size=32]
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513
[IDE] [1039:5513] (prog-if 80 [Master])
Subsystem: ASRock Incorporation Device [1849:5513]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: SIS_IDE
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems
[SiS] AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: ASRock Incorporation Device [1849:7012]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB
2.0 Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:7002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS]
SiS900 PCI Fast Ethernet [1039:0900] (rev 90)
Subsystem: ASRock Incorporation Device [1849:0900]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at cfffc000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sis900
00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7130
Video Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Device [1a7f:2004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at cfffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: saa7134
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44A
[GeForce 6200] [10de:0221] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:2156]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at b0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at cd000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at cfee0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 0c45:602e Microdia VideoCAM Messenger
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core)
Locale: LANG=es_CO.UTF-8, LC_CTYPE=es_CO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-3-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-3-686 recommends:
pn firmware-linux-free <none> (no description available)
pn libc6-i686 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information excluded
--- End Message ---
--- Begin Message ---
- To: 579332-done@bugs.debian.org
- Subject: Re: Bug#579332: linux-image-2.6.32-3-686: module sn9c102 over gspca_sonixb
- From: Moritz Muehlenhoff <jmm@inutil.org>
- Date: Wed, 5 Jun 2013 19:12:17 +0200
- Message-id: <20130605171217.GA15561@inutil.org>
- In-reply-to: <20100501132531.0450df13@tele>
- References: <eDKr7-al-5@gated-at.bofh.it> <eDLGx-2dh-3@gated-at.bofh.it> <20100501132531.0450df13@tele>
Version: 2.6.35-1
On Sat, May 01, 2010 at 01:25:31PM +0200, Jean-Francois Moine wrote:
> On Tue, 27 Apr 2010 07:40:01 +0200
> maximilian attems <max@stro.at> wrote:
>
> > On Mon, Apr 26, 2010 at 11:09:07PM -0500, bedorlan wrote:
> > > Package: linux-2.6
> > > Version: 2.6.32-9
> > > Severity: normal
> > > Tags: sid
> > >
> > > The webcam genius videocam messenger (ID 0c45:602e Microdia
> > > VideoCAM Messenger) works with the gspca_sonixb module, not with
> > > the sn9c102 module. The image with the sn9c102 module is really
> > > dark. Is not posible to enable the gspca_sonixb module because is
> > > disabled from kernel source as i can see in sonixb.c #if !defined
> > > CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
> > > {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, #endif
> >
> > defaults were set in July 2008, please report upstream on
> > bugzilla.kernel.org so that upstream hears about aboves situation.
> > and let us know the bug report so that we can track it.
> > thanks
>
> I am the gspca maintainer and I found this bug report in usenet.
>
> I will move the 0c45:602e webcam from sn9c102 to sonixb. This should go
> to the next Linux kernel (2.6.35).
Closing the bug.
Cheers,
Moritz
--- End Message ---